Analytical instruments

The compact one-channel gas chromatograph of the brand Interscience type Focus GC is designed to det (more)ermine the composition of a mixture both qualitatively and quantitatively. This gas chromatograph can be used in toxicology, doping research, forensics, in the petrochemical industry, in food safety monitoring and in the pharmaceutical industry. Equipped with a FID detector and a Thermo TriPlus autosampler with reagent heater.

Measuring range pH: -8.000 to +22.000 Resolution pH: 0.001 Measuring accuracy pH: ± 0.003 Measuring  (more)range temperature: -150°C to +250°C Resolution temperature: 0.1°C Measuring accuracy temperature: ± 0.2 °C Measuring range potential: -1200.0 mV to +1200.0 mV Resolution potential: 0.1 mV Measuring accuracy potential: ± 0.2 mV Memory capacity: 200 measured values Dimensions (WxHxD): 98 x 37 x 183 mm Weight: 370 g

0

0

0

Including test report.

Global Process Concept Sarl Temperature Controller.

20ml dosing set for metrohm titrator.

Equipped with a 35 turn glass coil. Max. Temp. 60 °C

Including electrode : pH: 0 -14 Temperature: 0 – 80°C

Colorimeter to test % transmittance in a sample.

Measuring range: Urine S.G. 1,000 ~ 1,050

Julabo LC4 temperature controller Working temperature range : -50 … +350°C Temperature stability : ± (more)0.05°C Dimensions : B170 x D170 x H160 mm Weight : 3kg

The LC-NMR-MS Interface is designed to sit between an HPLC system, an NMR spectroscopy probehead and (more) an MS unit. It would normally be mounted on top of the MS table immediately in front of the MS input connector. The BNMI-HP consists of 3 medium pressure (> 60Bar) syringe pumps, a 1:20 splitter, an 8-Port valve, 3 mixing chambers (T-Pieces) and associated control and interface electronics. The flow of the HPLC separations to the MS unit can be modified by pumping additional solvent from the syringe pumps. This improves the MS peak detection and shortens the time needed for the split separation to reach the MS. Separations can also be stored as a result of an MS peak detection as well as through UV absorption peak detection. The splitter splits the fluid flow from the HPLC in a 1:20 ratio. i.e. ca. 5% of the fluid is directed to the MS and the remainder to either the NMR probehead for immediate analysis or to the BPSU36 storage cassette for storage and later analysis.  The fluid directed to the MS is mixed in the mixing chamber (T-Piece) with the solvent pumped from the syringe pumps. The two left hand syringe pumps pump alternatively to guarantee a constant ’makeup’ flow. The 3rd pump at the right hand side is used to pump a calibration fluid into the flow path to allow the MS to be calibrated (or simply synchronized) at the start and end of each measurement cycle. The 8-Port valve is used to direct the fluid flow. Control of the BNMI Unit is performed using the HyStar program via an ethernet interface. Commands received from HyStar are interpreted in the BNMI Control Board. The control board then sets up the BNMI unit accordingly e.g.: Starts the pumps, changes the flow rate, turns the 8-Port valve. The splitter has a fixed mechanical function and cannot be controlled or adjusted. It simply accepts a fluid flow and splits it into 2 paths in a 1:20 ratio. However, other split ratios are available (for example 1:100 may be preferred if you have very high sample concentrations).

10ml dosing set for Metrohm titrator. Available in clear and tinted glass.

Sensitivity range: 1 µS/cm – 999.9 mS/cm Noise: ±0.5% full scale calibrated range Internal volume: 1 (more)4 µL Flow rate range: 0-100 mL/min Maximum operating pressure: 50 bar Dimensions (WxDxH): 245 x 150 x 100 mm

Compact, pH/mV meter with intuitive operation and improved user interface LCD guides user with plain (more)-language prompts and error messages Display indicators keep you apprised of menu choice, measuring units, buffers standardized (in pH mode) and temperature No cryptic icons to learn; prompts and status/error messages are displayed in plain language Store up to 100 datapoints in nonvolatile memory Selectable resolution to 0.1, 0.01, or 0.001pH Five-button, soft-key input simplifies data entry Internal diagnostics Automatic recognition of 15 buffers and five-point calibration BNC and reference pin inputs, input for accuFet Electrode, ATC probe input, plus bidirectional RS-232 port

As-is No warranty

Dimensions (W x D x H): 260 × 390 × 100 mm

The Schott titration device type T80-20 is ideal for carrying out manual titrations and dosing using (more) the simple push-button operation. This device can be used, among other things, for equivalence point determinations. Burette capacity: 20mL Dimensions (WxDxH): 130 x 200 x 290 mm

Met One offers battery-operated portability, up to six size channels and a built-in printerall in on (more)e simple, compact instrument. The Met One 237 counts airborne particles in up to six different size ranges simultaneously. Count data is displayed on the front-panel as total number of particles (cumulative count) or the particles in each size range (differential count). The bright LED display lets you see the data easily and the printout shows cumulative and differential count data for each size range. Channel Sizes: 2 ch; 0.5 µm, 5.0 µm – 4 ch; 0.5 µm, 0.7 µm, 1.0 µm, 5.0 µm – 5 ch; 0.5 µm, 0.7 µm, 1.0 µm, 2.0 µm, 5.0 µm – 6 ch; 0.5 µm, 0.7 µm, 1.0 µm, 2.0 µm, 3.0 µm, 5.0 µm Flow Rate: 0.1 CFM (2.83 LPM) Coincidence Limit: 2 million/ft3 Light Source: Laser diode Data Storage: 500 samples, rotating buffer Sample and Hold Times: 1 second to 24 hours Count Alarms: 1 to 9,999,999, counts each channel Count Modes: Manual, auto, concentration, beep Concentration Mode: 1 second samples, 1 to 10 samples averaged, display updated every second; displays counts/ft3, liter or counts/1000L (m3) Battery Recharge Time: 16 hours (with unit off) Battery Operating Time: 4 hours with printing, 8 hours without printing Dimensions (WxhXD): 170 x 120 x 300 mm Weight: 3.1 kg