Radwag PSW Professional Single Weighing Workstation

Dimensions: 1740 x 800 x 960 mm

Dimensions (HxWxD): 780 x 900 x 600 mm

The antivibration table has been designed to eliminate ground vibrations during the operation of lab (more)oratory equipment such as microbalances, analytical balances and others. It consists of two separate constructions: the outer, designed to isolate the working part, and the inner. The working part includes a table and a stone separated by a vibration damper. The table features a stone top (located at the centre of the table) and adjustable feet with protective rubber tips, facilitating table levelling on uneven surfaces. The structure and the tabletop are made of acid-resistant stainless steel.

The professional weighing workstation is intended for microbalances and analytical balances. It is e (more)quipped with two lockers for a computer and an emergency UPS power supply or a power strip. The workstation also has a sliding shelf for a keyboard and a mouse. It additionally features ventilation openings and a base for a monitor. The separated anti-vibration part provides protection against vibration, and the feet feature rubber tips to facilitate table levelling on uneven floors. The structure of the workstation is made of steel, the top of stone, and the working part of MDF.

The dual weighing workstation is intended for microbalances and analytical balances. It is equipped  (more)with two lockers for a computer and an emergency UPS power supply or a power strip. The workstation also has a sliding shelf for a keyboard and a mouse. It additionally features ventilation openings and a base for a monitor. The separated anti-vibration part provides protection against vibration, and the feet feature rubber tips to facilitate table levelling on uneven floors. The structure of the workstation is made of steel, the two tabletops that allow two balances to be used simultaneously are made of stone, and the working part of the tables is made of MDF.

If you buy a High Resolution Scale HY10 by July 31, 2024, you will receive each of these products al (more)ong with a FREE lifetime license for the Workflow Module. Fast and Stable Measurement The scale displays the final result even in one second. High Maximum Capacity and Accuracy in a Single Device On the large weighing pan of an HRP scale, you can weigh a load of 150 kg with a readability of 1 g and impressive repeatability. Minimum Eccentricity Error Over the Entire Range On the HRP scales, you can also weigh irregularly shaped items with a centre of gravity significantly displaced from the weighing pan axis. Parameter Stability Over Time and After Transport Retain the correct metrological parameters even after prolonged, intensive use and transport of the scale due to its resistant and robust mechanical design. Weighing Pan Dimensions Adapted to the Accuracy of the Balance Weigh with the highest readability of 0.02 g on the 360 x 280 mm weighing pan and with a readability of 20 g on the 1,250 x 1,000 mm weighing pan. Maximum Robustness IP 67 platforms with additional sealing elements to protect against dust, dirt and moisture and can be cleaned with a pressure washer. New, lmproved MONOBLOCK® The new, taller and larger MONOBLOCK® enables the best repeatability and speed in its class of weighing platforms. New HRP Platform HY10 terminal is a constructional component of industrial multifunctional load cell scales, it connects with RADWAG high resolution platforms and weighing modules. Readability of 0.01 g at 10 kg maximum capacity and 0,2 g at 120 kg maximum capacity. Repeatability down to 0.01. Higher resistance to changes in ambient conditions. The platforms are so robust that they can be cleaned with a pressure washer. Transport protection that stiffens the structure during transport, eliminating any unwanted stresses. Platforms with a maximum capacity starting at 300 kg include transport handles, which makes them easy to move. Platforms of IP 67. PUE HY10 Terminal HY10 terminal is a constructional component of industrial multifunctional load cell scales, it connects with RADWAG high resolution platforms and weighing modules. High Level of Protection HRP scales have additional sealing elements to protect them from dust, dirt and moisture. This allows them to be cleaned with a pressure washer.

Demo device. Unused & in original packaging. 2022 model. Great condition. 6 months warranty. Technic (more)al specifications: - External dimensions (WxDxH): 780 x 970 x 945 mm - Internal dimensions (WxDxH): 607 x 670 x 629 mm - Internal volume: 255 l (usable: 162 l) - Rack dimensions: 560 x 500 mm (capacity: 12 pcs., scope of delivery: 3 pcs.) - Max. weight load per rack: 10 kg - Max. weight load per device: 30 kg - Device weight: 97.5 kg - Adjustable temperature: +3 °C - 55 °C - Ambient temperature: +18 °C - +34 °C - Temperature deviation: +/- 0.1 °C

The iBlot 2 Gel Transfer Device is an integral part of the iBlot 2 Dry Blotting System, which consis (more)ts of the transfer device and consumable transfer stacks that contain the required buffers and transfer membrane (nitrocellulose or PVDF). Complete protein transfer in 7 minutes or less High detection sensitivity and even transfer Increased blotting reliability and reproducibility Flexible gel size formats and membrane types A simple, user-friendly system Options to create new custom programs Built-in tutorial and application notes High-quality transfer stacks that are more compact than before Rapid, High-quality Protein Transfers For dry electroblotting of proteins from mini-, midi-, and E-PAGE gels onto nitrocellulose or PVDF membranes for Western detection Offers high-quality transfer, convenience, and speed, producing crisp, clear bands that remain sharp and straight, with exceptional transfer efficiency Allows users to create custom programs Membrane Compatibility: Nitrocellulose, PVDF Throughput: 1 Midi or 2 Mini Gels Running Dimension: Horizontal For Use With (Application): Western Blot Gel Compatibility: Bolt Bis-Tris Plus Gel, E-PAGE Gel, Novex Midi Gel, NuPAGE Gel, Novex Mini Gel Mode of Transfer: Dry Running Time: ∼7 min Dimensions: 370 x 200 x 110 mm Weight: 2.3 kg

Tecan Genios Pro Multifunction Microplate Reader: The Tecan Genios Pro is a fully automatic, compute (more)r controlled Fluorescence. Luminescence and Absorbance instrument for measuring samples in a microplate. The instrument fulfills the requirements for numerous fluorescence, absorbance and luminescence applications in research and routine investigations. The filters are arranged in filter slides; four excitation filters and four emission filters respectively can be installed in the slides. Handles 6, 24, 96 and 384 well plates. Spectral range 360-700nm for fluorescence. 230-900nm absorbance spectral range. Sensitivity ≤1.5 picogram fluorescein on each well or ≤4 fmol well. The emission signal is measured by a highly sensitive PMT. Different detection techniques with one instrument change of measurement directions (top / bottom) by PC software. Thermal incubation at +5º C to + 40º C. Dual optical channels allow measurements from above or below the plate by mouse-click. Light to and from the samples is focused by a lens and high quality filters are easily accessible from the front of the instrument. Each filter slide can hold up to four filters. Orbital shaking and temperature control are standard. Plate formats: 6 to 384 well plates Absorbance Range: 230-999nm Temperature control: Ambient + 5 °C to 42 °C Shaking: Linear or orbital, 3 velocities Fluorescence Intensity Wavelength range: Excitation: 230 – 850 nm, emission: 280 – 850 nm Bandwidth: Adjustable from 2.5 nm – 10 nm below 280 nm, 5 nm – 20 nm above 280 nm Wavelength accuracy: ± 1 nm Wavelength precision: ± 1 nm Sensitivity (top reading – 384 well plate): 0.2 fmol/well Sensitivity (bottom reading – 384 well plate): 0.6 fmol/well Time Resolved Fluorescence Sensitivity (384 well plate): 60 amol/well Precision (384 well plate): 3 mP standard deviation Fluorescence Polarization Wavelength Range: 275-750nm Absorbance (96 well) Wavelength range: 230 – 999 nm Wavelength accuracy (492nm): ±/- 1% and ±/- 0.010 OD OD Wavelength precision (492nm): ±/- 10,5% and ±/- 0.005 OD OD Measurement range: 0 – 4 OD Glow Luminescence Type: Chemi or Bioluminescence Wavelength readings: 400-700nm

Polyscience MX28P100-A11B 28L Polycarbonate Open Bath, MX (Ambient +10 to 85C), 120V, 60HzFeatures - (more) Large, universal icon and English display - On-screen prompts - Single-point calibration capability - Working temperatures from ambient +10° up to 150°C - DuraTop™ insulating, chemical-resistant top deck - Temperature stability of ±0.07°C - Controller displays internal bath temperature, set-point and more–all on one easy to read screen Three control buttons and plain-text on-screen prompts make the setup and operation of the MX Temperature Controller easy and straightforward. Redundant over-temperature protection, high and low temperature limits and alarms alert you instantly to conditions that fall outside normal operating parameters User-settable high-temperature safety provides over-temperature and low liquid level protection. Patented, integrated design protects pump and heater while simplifying cleaning and maintenance. PolyScience Circulating Bath with MX Temperature Controller. It is intended for the precise temperature control of suitable liquids in a reservoir. Extremely easy to use and maintain, it combines design innovation with highly intuitive operation to deliver convenient and versatile liquid temperature control for a wide range of applications. Click Here to View Product Video INCLUDED: The Polyscience MX28P100-A11B 28L Polycarbonate Open Bath, MX (Ambient +10 to 85C), 120V, 60Hz includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Ohaus 30573847 ISTHBLHTSN Thermal Shaker, 120V Orbit 3mm Speed Range 300 to 3,000 RPM Heating Rate ( (more)/min) 5°C/min (/min) Features - Best in class temperature performance. Enhanced electronics and software allow for fast and accurate temperature control you can trust. - Intuitive touchscreen for simple operation and programming. - Set the functions and the comprehensive help screens in one of six languages to guide the user through the operation of the unit. - Easily create programs for repeat applications. Storage for five separate, 5-step programs. - The USB port allows the transfer of test data to a flash drive for data logging and program storage. OHAUS Thermal Shakers are designed for heating and cooling applications that require consistentand precise high-speed shaking with dependable temperature control from 17°C below ambient to100°C. Temperature can be user-calibrated when precision is required. Customize applications withinterchangeable blocks to accommodate tubes & microplates. Intuitive touchscreen allows the user toview all steps of the program while monitoring the progress. INCLUDED: The Ohaus 30573847 ISTHBLHTSN Thermal Shaker, 120V includes: - Screwdriver for Block Removal - Detachable 3-wire cord and plug - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Adam Equipment LBB 6001E Luna Precision Balance, 6000g, 0.1g Capacity 6000g Readability 0.1g Repeat (more)ability 0.2g Features - Vivid, backlit LCD easily visible in any lighting conditions - Colour-coded keys facilitate quick recognition of the most frequently used buttons - Level indicator and adjustable feet ensure proper balance setup for optimum weighing results - Security slot for optional Kensington-type lock and cable to help prevent theft - Large, grade 304 stainless steel pan allows easy cleaning - Sealed keypad protects against dirt and spills - USB and RS-232 interfaces provide speedy communication with computers and printers - External calibration allows for verification and adjustment with weights ("I" models also feature internal automatic calibration) - Multilingual display permits use in various regions - Parts counting with preset sample sizes - Printouts include date and time for data tracking within Good Laboratory Practices (GLP) guidelines - Selectable digital filtering for animal/dynamic weighing enables consistent results for moving subjects - Auto power-off to save energy The Adam Equipment Luna Precision Balances can meet the diverse weighing needs in a variety of labs, with numerous features and functions included. The Luna series offers improved performance for faster, more accurate readings. The Luna series also combines durability and performance in a stylish design, with an LCD that delivers results in large 24mm digits in white on a black background. Suitable for international use, Luna provides a useful multilingual text and display capability. RS-232 and USB facilitate data gathering and enable smooth communication with printers and computers. Designed to tolerate demanding lab tasks, Luna is constructed with easy-to-clean ABS plastic construction and a durable grade 304 stainless steel pan. The Luna Precision Balances are available in 20 different models that offer internal or external calibration, capacities from 220g to 15000g, and readabilities from 0.001g to 0.01g. INCLUDED: The Adam Equipment LBB 6001E Luna Precision Balance, 6000g, 0.1g includes: - Power Cord - Operator's Manual - Manufacturer's Documentation - 5 Year Manufacturer's Warranty