Moisture analysers

Ohaus MB25 Moisture Analyzer Superior performance, numerous configurations and optimal results The M (more)B25 analyzer provides an accurate determination of moisture content at an unbeatable value. Featuring a large backlit LCD display, standard RS232 port, 110g range with 0.005g / 0.05% resolution, and halogen heating, the MB25 provides moisture determination for any budget. Applications Determination of the percentage humidity, determination of the percentage solid component, weighted. Display Backlit liquid crystal display (LCD). Operation Power cord (included). Communication RS232 (included). Structure Halogen heating, ABS armor, metal plate holder, metal plate manipulator, protective hood. Construction features Three shutdown criteria (manual, timed, automatic), 1 standard heat profile, heating range from 50°C to 160°C (in 5°C increments). Construction features Plate size 90 mm. Heater type Halogen lamp. Automatic shutdown criteria - Pre-defined weight / time loss; Timed; Manual.

Ohaus MB23 Moisture Analyzer Superior performance, numerous configurations and optimal results The M (more)B23 analyzer provides an accurate determination of moisture content at an unbeatable value. Featuring a large backlit LCD display, standard RS232 port, 110g range with 0.01g/0.1% resolution and infrared heating (no glass), the MB23 analyzer offers moisture determination for any budget. Applications Determination of the percentage humidity, determination of the percentage solid component, weighted. Display Backlit liquid crystal display (LCD). Operation Power cord (included). Communication RS232 (included). Structure Infrared heating, ABS armor, metal plate holder, metal plate manipulator, protective hood. Construction features Three shutdown criteria (manual, timed, automatic), 1 standard heat profile, heating range from 50°C to 160°C (in 5°C increments).

Ohaus MB27 Moisture Analyzer Superior performance, numerous configurations and optimal results The M (more)B27 analyzer provides an accurate determination of moisture content at an unbeatable value. Featuring a large backlit LCD display, standard RS232 port, 90g range with 0.001g / 0.01% resolution, and halogen heating, the MB27 offers moisture determination for any budget. Applications Percentage Moisture Determination, Percent Solids Determination, Weighted Display Backlit Liquid Crystal Display (LCD) Operation Power cord (included) Communication RS232 (included) Structure Halogen heating, ABS armor, metal plate holder, metal plate manipulator, protective hood Construction features Particular characteristics of the MB27 model Resolution for moisture content: 1mg/0.01%. Heater type: halogen lamp. Lid included. Auto-Off Criteria: Default Weight Loss/Time; manual; timed. L'analizzatore di umidità MB27 è adatto per la maggior parte delle applicazioni in laboratorio, grazie ad una precisione dello 0,01% 0,001 g. Risultati veloci e precisi con la doppia calibrazione peso-temperatura e il riscaldamento alogeno. Design pultio e compatto, per occupare poco spazio sul banco del laboratorio, senza rinunciare ad una estetica piacevole e funzionale.

Ohaus MB120 Moisture Analyzer MB120 allows you to run more samples, access saved data and spend less (more) time preparing and more time working with results. Smart, futuristic features that allow you to work at full potential: - Get started with SmartGuide ™ right away. This revolutionary feature automatically analyzes a sample and creates a method, thus eliminating any uncertainty from the initial setup. - The MB120 is able to produce fast and accurate results thanks to features such as a halogen heating system, customizable shutdown criteria and four integrated drying profiles. - The MB120 allows you to store up to 100 methods and 1,000 measurement results. Stored results can be exported and methods can be shared across multiple devices. Applications Determination of percentage humidity, determination of the recovery of percentage humidity, determination of solids in percentage, weighing Display 4.3 inch TFT color touchscreen display Operation Power cord (included) Communication RS232 with GLP / GMP data output, USB host and USB device (included) Structure Metal base, ABS top housing, halogen heat source, stainless steel plate holder, stainless steel plate manipulator, protective hood Construction features Seven shutdown criteria (manual, timed, custom automatic% / s, custom automatic mg / s, A30, A60 and A90), four drying profiles (standard, fast, ramp and step), storage up to 100 methods and 1,000 results for all methods, user guide, heating temperature range from 40 to 230 ° C (in 1°C increments), 14 languages ​​of operation Technical features Resolution for moisture content: 1mg/0.01%. Heater type: halogen lamp. Heat profiles: Standard; Fast; Ramp; Step. Recommended humidity range: 0% - 100%. Sample size: 0.5g – 1290g. Shutdown criteria: Manual; Timed; Automatic - Preset weight / time loss; Custom - User configurable weight / time loss; Custom: User configurable% moisture / time loss. Test library: 2. Additional features - MB90 Upper housing in ABS, weighing pan support in stainless steel, pan holder in stainless steel, protective hood, 3 shutdown criteria (manual, timed or automatic), 2 heating profiles (standard and fast), storage of up to 2 methods and 100 test results for each method, user guide, heating temperature range 40–200°C (in 1°C increments), 13 operating languages ​​(display only, no typing). Drying profiles Two pre-set profiles for drying in one step: just set the temperature and the timer. FAST: reaching the temperature in the shortest possible time. STANDARD: reduces overheating to a minimum while still reaching the temperature quickly. The simplest control panel • Icon driven menu navigation; no training is required. • 4 mechanical keys for fast one-step operation: Tare, Start/Stop, Print, On/Off. • Simplified moisture analysis; in just 3 steps, routine testing on samples: 1. Tare the empty sample dish. 2. Add sample according to best practices. 3. Press start and see your results! Halogen heating dries samples in seconds and is 40% faster than traditional infrared methods. Large, bright touchscreen display and quick and easy menu navigation for precise moisture analysis. Versatile connectivity options to handle data collection and transfer needs: improve user experience. • USB and RS232 ports - quick connections to a PC or flash drive. • Data collection and transfer directly to a USB stick.

Ohaus MB90 Moisture Analyzer Designed to increase accuracy and efficiency in the laboratory, these m (more)oisture analyzers feature a precisely controlled halogen heating system that helps deliver fast, repeatable results with resolution down to 0.01%. The robust housing and die-cast structure are designed for resistance and easy cleaning without specific accessories. An icon-based menu with intuitive touchscreen guides users through each step of the process. The three main features: • Halogen heating, for faster results. • Large intuitive touchscreen menu. • Tool-free cleaning for easy maintenance. Applications Determination of percent moisture, determination of percent moisture regain, determination of percent solids, weighing Display 4.3 inch color TFT touch screen display Operation Power cord (included) Communication RS232 with GLP/GMP data output, USB host and USB device (included) Structure Metal base, ABS top housing, halogen heat source, stainless steel pan holder, stainless steel pan handler, protective hood Qualitative characteristics Three shutdown criteria (manual, timed or automatic), two drying profiles (standard and fast), ability to archive up to two methods, user guide, heating temperature range from 40 to 200°C (in increments of 1 °C), 14 operating languages. Technical features Resolution for moisture content: 1mg/0.01%. Heater type: halogen lamp. Heat profiles: Standard; Fast. Recommended humidity range: 0% - 100%. Sample size: 0.5g – 90g. Shutdown criteria: manual; timed; automatic. Test library: 2. Additional features - MB90 Upper housing in ABS, weighing pan support in stainless steel, pan holder in stainless steel, protective hood, 3 shutdown criteria (manual, timed or automatic), 2 heating profiles (standard and fast), storage of up to 2 methods and 100 test results for each method, user guide, heating temperature range 40–200°C (in 1°C increments), 13 operating languages ​​(display only, no typing). Drying profiles Two pre-set profiles for drying in one step: just set the temperature and the timer. FAST: reaching the temperature in the shortest possible time. STANDARD: reduces overheating to a minimum while still reaching the temperature quickly. The simplest control panel • Icon driven menu navigation; no training is required. • 4 mechanical keys for fast one-step operation: Tare, Start/Stop, Print, On/Off. • Simplified moisture analysis; in just 3 steps, routine testing on samples: 1. Tare the empty sample dish. 2. Add sample according to best practices. 3. Press start and see your results! Halogen heating dries samples in seconds and is 40% faster than traditional infrared methods. Large, bright touchscreen display and quick and easy menu navigation for precise moisture analysis. Versatile connectivity options to handle data collection and transfer needs: improve user experience. • USB and RS232 ports - quick connections to a PC or flash drive. • Data collection and transfer directly to a USB stick.

This DVS Water Vapor Sorption Analyzer System was removed from a university lab where it was surplus (more) to requirements. The system powers on and is in good cosmetic condition. The system was tested with a digital thermometer (not included), but has not been tested further. System includes: CAHN DVS-1 CAHN Digital Recording Balance D-200 DVS Surface Measurement Systems

A&D Weighing MX-50 Moisture Analyzer Capacity 51 g Weight Resolution 0.001g Moisture Content Ac (more)curacy 0.10 % (Over 1 g) 0.02% (Over 5 g) Features - 4 Selectable heating modes from standard, quick, step and ramp that help customize heating curves to your unique sample types for accuracy & precision - 5 Selectable measurement programs to best fit sample and process with STANDARD, QUICK, AUTOMATIC, TIMER, MANUAL - Clear & easy-to-view with the large VFD display means setting values, change in moisture content, action status indicators, and data number are clearly visible - Safe & Reliable Design - Easy handles & ergonomic design helps to prevent burn injuries while improving workflow movements of samples in and out efficiently - Self Check functions such as defect check function along with temperature control checks have you covered - Progress window allows easy visibility to see heating process through translucent window - Quick Reference Card for convenient operating guide is installed at the bottom of the analyzer - Data Interface is a breeze with RS-232C interface and our WinCT–Moisture software that helps determine measurement conditions as well as optimize time & accuracy - Data memory function allows for test results to be stored and recalled or outputted for additional analysis - GLP, GMP, GCP and ISO compliant with date/time, ID, calibration data and check record outputs The A&D Weighing MX-50 Moisture Analyzer is a powerful tool for precise moisture analysis, offering a blend of performance and user-friendly design for diverse laboratory needs. Equipped with four selectable heating modes—standard, quick, step, and ramp—the MX-50 allows users to tailor heating curves to their specific sample types, ensuring both accuracy and efficiency. With five measurement programs (Standard, Automatic, Quick, Timer, and Manual), this analyzer adapts to varying sample and process requirements, making it versatile for both routine and complex moisture analyses. The large VFD display provides clear visibility of all critical data, including settings, moisture changes, and process indicators, streamlining workflow and reducing user error. An ergonomically designed pan handle ensures safe handling of hot samples, and a convenient progress window lets users monitor the heating process with ease. Additionally, the unit is equipped with self-check functions to maintain reliability, including defect checks and temperature control. The MX-50 supports compliance with GLP, GMP, GCP, and ISO standards, making it ideal for regulated environments. Its RS-232C interface and WinCT-Moisture software allow for seamless data transfer, and the memory function stores up to 100 sets of measurement data, enhancing traceability and record-keeping. Supported by a robust 5-year warranty, the A&D Weighing MX-50 ensures long-term reliability and precision, solidifying its place as a top choice for moisture analysis in the lab. INCLUDED: The A&D Weighing MX-50 Moisture Analyzer includes: - 20 Sample Pans - Pan Support - Pan Handle - Tweezers - Spoon - Glass Fiber Sheet - RS-232C Cable - Display Cover - Dust Cover - Breeze Break Ring - Halogen Lamp - Power Cord - Operator's Manual - Manufacturer's Documentation - 5 Year Manufacturer's Warranty

A&D Weighing MS-70 Moisture Analyzer Capacity 71 g Weight Resolution 0.0001g Moisture Content A (more)ccuracy 0.05 % (Over 1 g) 0.01% (Over 5 g) Features - 4 Selectable heating modes from standard, quick, step and ramp that help customize heating curves to your unique sample types for accuracy & precision - 5 Selectable measurement programs to best fit sample and process with STANDARD, QUICK, AUTOMATIC, TIMER, MANUAL - Clear & easy-to-view with the large VFD display means setting values, change in moisture content, action status indicators, and data number are clearly visible - Safe & Reliable Design - Easy handles & ergonomic design helps to prevent burn injuries while improving workflow movements of samples in and out efficiently - Self Check functions such as defect check function along with temperature control checks have you covered - Progress window allows easy visibility to see heating process through translucent window - Quick Reference Card for convenient operating guide is installed at the bottom of the analyzer - Data Interface is a breeze with RS-232C interface and our WinCT–Moisture software that helps determine measurement conditions as well as optimize time & accuracy - Data memory function allows for test results to be stored and recalled or outputted for additional analysis - GLP, GMP, GCP and ISO compliant with date/time, ID, calibration data and check record outputs The A&D Weighing MS-70 Moisture Analyzer is a top-tier solution designed for labs requiring the highest level of precision and versatility in moisture analysis. Featuring four selectable heating modes—standard, quick, step, and ramp—the MS-70 offers customizable heating curves to perfectly match the unique requirements of diverse sample types, ensuring accurate and repeatable results every time. With five distinct measurement programs (Standard, Automatic, Quick, Timer, and Manual), users can easily select the ideal method for each process, maximizing efficiency and adaptability. The large, easy-to-read VFD display presents all critical information—moisture change, set values, action status, and data numbers—clearly, facilitating smooth operation. The MS-70’s ergonomic design, complete with safety-oriented handles and a progress-view window, enhances workflow by reducing handling errors and preventing accidental burns. Self-check functions further ensure reliability by continuously monitoring defect and temperature controls. Data management is streamlined with the RS-232C interface and WinCT–Moisture software, making data export, analysis, and GLP/GMP/GCP/ISO-compliant reporting effortless. The memory function stores up to 20 unique measurement conditions and 100 test results, allowing for quick setup recall and reliable documentation. Designed with high-performance halogen heating technology, capable of detecting even slight moisture drops (under 1% with PET samples), the MS-70 promises accuracy, ease, and safety, backed by dependable long-term performance. Backed by a comprehensive 5-year warranty, the MS-70 Moisture Analyzer offers lasting reliability and peace of mind for your lab's moisture analysis needs. INCLUDED: The A&D Weighing MS-70 Moisture Analyzer includes: - 20 Sample Pans - Pan Support - Pan Handle - Tweezers - Spoon - Glass Fiber Sheet - RS-232C Cable - Display Cover - Dust Cover - Breeze Break Ring - Halogen Lamp - Power Cord - Operator's Manual - Manufacturer's Documentation - 5 Year Manufacturer's Warranty

A&D Weighing ML-50 Moisture Analyzer Capacity 51 g Weight Resolution 0.005g Moisture Content Ac (more)curacy 0.50 % (Over 1 g) 0.10% (Over 5 g) Features - 2 Selectable heating modes from standard and quick that help customize heating curves to your unique sample types for accuracy & precision - 5 Selectable measurement programs to best fit sample and process with STANDARD, QUICK, AUTOMATIC, TIMER, MANUAL - Clear & easy-to-view with the large VFD display means setting values, change in moisture content, action status indicators, and data number are clearly visible - Safe & Reliable Design - Easy handles & ergonomic design helps to prevent burn injuries while improving workflow movements of samples in and out efficiently - Self Check functions such as defect check function along with temperature control checks have you covered - Progress window allows easy visibility to see heating process through translucent window - Quick Reference Card for convenient operating guide is installed at the bottom of the analyzer - Data Interface is a breeze with RS-232C interface and our WinCT–Moisture software that helps determine measurement conditions as well as optimize time & accuracy - Data memory function allows for test results to be stored and recalled or outputted for additional analysis - GLP, GMP, GCP and ISO compliant with date/time, ID, calibration data and check record outputs The A&D Weighing ML-50 Moisture Analyzer is a streamlined and reliable solution for basic moisture analysis, designed for straightforward operation in routine lab settings. With a maximum sample capacity of 51g and a readability of 0.005g, the ML-50 is equipped to deliver accurate moisture content measurements with a moisture resolution of 0.1% or 1%, depending on your sample needs. Its halogen heating system, with a 400W lamp, provides consistent drying within a range of 50-200°C, ideal for efficient moisture determination. The ML-50 offers two practical heating modes—Standard and Quick—perfect for routine measurements where simple operation is key. The large, clear VFD display ensures easy visibility of key parameters such as moisture content changes, measurement settings, and status indicators. Ergonomically designed for ease of use, it includes secure pan handles and a self-check function for added safety during operation. This analyzer includes external calibration and is compliant with standard lab requirements. Designed to fit compact lab spaces, the ML-50 is a dependable choice for essential moisture analysis. INCLUDED: The A&D Weighing ML-50 Moisture Analyzer includes: - 10 Sample Pans - Pan Handle - Display Cover - Dust Cover - Breeze Break Ring - Halogen Lamp - Power Cord - Operator's Manual - Manufacturer's Documentation - 5 Year Manufacturer's Warranty

A&D Weighing MF-50 Moisture Analyzer Capacity 51 g Weight Resolution 0.002g Moisture Content Ac (more)curacy 0.20 % (Over 1 g) 0.05% (Over 5 g) Features - 4 Selectable heating modes from standard, quick, step and ramp that help customize heating curves to your unique sample types for accuracy & precision - 5 Selectable measurement programs to best fit sample and process with STANDARD, QUICK, AUTOMATIC, TIMER, MANUAL - Clear & easy-to-view with the large VFD display means setting values, change in moisture content, action status indicators, and data number are clearly visible - Safe & Reliable Design - Easy handles & ergonomic design helps to prevent burn injuries while improving workflow movements of samples in and out efficiently - Self Check functions such as defect check function along with temperature control checks have you covered - Progress window allows easy visibility to see heating process through translucent window - Quick Reference Card for convenient operating guide is installed at the bottom of the analyzer - Data Interface is a breeze with RS-232C interface and our WinCT–Moisture software that helps determine measurement conditions as well as optimize time & accuracy - Data memory function allows for test results to be stored and recalled or outputted for additional analysis - GLP, GMP, GCP and ISO compliant with date/time, ID, calibration data and check record outputs The A&D Weighing MF-50 Moisture Analyzer delivers precision and reliability tailored for demanding moisture analysis needs. Equipped with advanced Super Hybrid Sensor (SHS) technology, the MF-50 ensures exceptionally accurate moisture content readings, even with minimal sample sizes. Its four selectable heating modes—standard, quick, step, and ramp—allow users to customize heating curves for varied sample types, enhancing accuracy and repeatability. Additionally, the five measurement programs (Standard, Automatic, Quick, Timer, and Manual) provide flexibility, making the MF-50 adaptable to diverse analytical needs. Designed for safety and ease of use, the MF-50 features ergonomic pan handles that prevent burns and facilitate efficient sample handling. The large, clear VFD display shows essential data such as moisture changes, action status, and measurement results in real-time, ensuring process transparency. Data storage is seamless, with an RS-232C interface that supports the WinCT-Moisture software for optimizing analysis accuracy and compliance with GLP, GMP, GCP, and ISO standards. With a robust 51 g capacity and precise moisture readability of 0.05%, the MF-50 offers top-tier performance and traceability, making it an essential tool for rigorous moisture measurement tasks. INCLUDED: The A&D Weighing MF-50 Moisture Analyzer includes: - 20 Sample Pans - Pan Support - Pan Handle - Tweezers - Spoon - Glass Fiber Sheet - Display Cover - Dust Cover - Breeze Break Ring - Halogen Lamp - Power Cord - Operator's Manual - Manufacturer's Documentation - 5 Year Manufacturer's Warranty

Are you overwhelmed by the number of production processes? What about having them all under control? (more) To be able to analyse and correct them in real time? After all, it is the key to increasing the efficiency of the production line! Our clients, the factory owners, were the ones who told us about their problems and needs. Our answer is simple: the E2R System. This software is designed to make your work easier. The E2R System consists of six independent modules: 1. E2R Weighing, 2. E2R Weighing Records, 3. E2R Formulations, 4. E2R PGC, 5. E2R Checkweigher, 6. E2R Moisture Analyzer. Choose the best module for your company. Need more information? With the E2R Moisture Analyzer module, you can: read moisture analyzer data and store it in the MS SQL database; due to the possibility of online operation, monitor the parameters of currently running drying processes from a computer; display information about current measurements as well as the status and outcome of the drying process in real time; generate online graphs in relation to drying time; have access to the reports generated by moisture analyzers; operate and monitor up to 16 moisture analyzers; automatically start the connection of the moisture analyzers with the database after the computer is switched on (operation in system service mode); connect the moisture analyzers to the Ethernet network using an RS232 multiport card and an Ethernet/RS232 converter; filter dates and records, as well as group and sort orders and individual measurements; generate archived reports and graphs; define the permission levels for specific operators; select the language of each of the system components; customize the program’s graphical interface and modify reports and graphs; work over an Ethernet network.

Powerbank ZR-04 is used for rechargeable power supply for balances and scale accessories. It uses fa (more)st charging technology. It allows long operating time without recharging and, thanks to the “Low Power” function, powering devices with low power consumption. The ZR-04 powerbank is made of high-quality components that ensure reliable operation. A display indicating the state of charge enhances ergonomics. Powerbank ZR-04 meets airline standards, which means that it can be carried on board an airplane as hand luggage. The device can simultaneously power the balance/ scale and charge the internal battery. The average power time of the balance/ scale is, depending on the product series, from 8 to as much as 24 hours.

Powerbank ZR-04 is used for rechargeable power supply for balances and scale accessories. It uses fa (more)st charging technology. It allows long operating time without recharging and, thanks to the “Low Power” function, powering devices with low power consumption. The ZR-04 powerbank is made of high-quality components that ensure reliable operation. A display indicating the state of charge enhances ergonomics. Powerbank ZR-04 meets airline standards, which means that it can be carried on board an airplane as hand luggage. The device can simultaneously power the balance/ scale and charge the internal battery. The average power time of the balance/ scale is, depending on the product series, from 8 to as much as 24 hours.

Powerbank ZR-04 is used for rechargeable power supply for balances and scale accessories. It uses fa (more)st charging technology. It allows long operating time without recharging and, thanks to the “Low Power” function, powering devices with low power consumption. The ZR-04 powerbank is made of high-quality components that ensure reliable operation. A display indicating the state of charge enhances ergonomics. Powerbank ZR-04 meets airline standards, which means that it can be carried on board an airplane as hand luggage. The device can simultaneously power the balance/ scale and charge the internal battery. The average power time of the balance/ scale is, depending on the product series, from 8 to as much as 24 hours.

ZD421t (ZD4A042-30EM00EZ) - printer suitable for printing thermal and thermal transfer self-adhesive (more) labels. The maximum width of the media is 108 mm, with the maximum print on the width of 104 mm. As standard, it has a built-in movable label sensor. Printing takes place at speeds up to 152 mm / s, printing resolution 203 dpi. The printer is equipped with a USB port. The basic version of the printer does not include a dispenser and a cutter.

The water vapour permeability determination set is used in moisture analyzers of max capacity greate (more)r than 50g. Water vapour permeability is a feature that determines the quality and practicality of application of a given fabric. Clothes or footwear made of materials of inadequate permeability may be unhealthy and uncomfortable. In order to determine water vapour permeability, RADWAG moisture analyzer has to be equipped with a water vapour permeability determination set. The developed method of testing water vapour permeability consists in placing required amount of water in a vessel made of aluminium alloy, inside which a fabric sample, cut using a blanking die, is clamped. Prior to the test, the sample should be left in a room with stable ambient conditions for 24 hours. It is recommended to place the vessel containing water and sample in the moisture analyzer and start the drying process at 40°C. The advantage of this method is a very short drying time. It takes up to 50 minutes to obtain the result. In contrast, measurement carried out using standard method takes up to 72 hours. Measurement results are presented in mg H2O / 1000 mm2 / 24h or as the percentage amount of water vapour passed through the material to the amount of water vapour passed without the tested fabric.

The set is an ideal solution for drying large volume samples, e.g. textiles, or products that placed (more) on the weighing pan tend to increase their volume. The container allows to enclose the sample within a limited space wherein the possibility to determine the moisture content value remains unaffected. In the case of large-volume samples, the kit prevents the sample from coming into contact with solid elements of the moisture analyzer (such as the heating element or its cover) and protects it from damage. Closing a large-volume, low-density sample in the container also reduces the risk of errors resulting from the effect of the sample being raised by warm air. The accessory gives the user full control of the sample and an error-free result. The set consists of 2 components made of steel. It is compatible with all moisture analyzers.

The case has been designed for safe transportation of the PMV PLUS moisture analyzer. It is equipped (more) with two handles for convenient carrying so that the device can be transported by two people at the same time (recommended). The interior of the case has been adapted to fit all device components, with this it can be carried without the risk of damage. The case is made of 6 mm thick plywood. It features reinforced corners, aluminium trim, and hard dark foam filling. The case comes as an accessory.

The case has been designed for safe transportation of the MA X2, MAR moisture analyzer. It is equipp (more)ed with two handles for convenient carrying. The interior of the case has been adapted to fit all device components, with this it can be carried without the risk of damage. The case is made of 6 mm thick plywood. It features reinforced corners, aluminium trim, and hard dark foam filling. The case comes as an accessory.

This is the first receipt printer of RADWAG production. We offer two models which differ in terms of (more) communication interfaces: RTP-RU80 – RS 232* and USB, RTP-UEW80 – USB, Ethernet and Wi-Fi. The printers communicate with all RADWAG laboratory balances and industry scales. Their connection and configuration is intuitively easy and takes barely few moments (Plug and Play). Communication via Wi-Fi enables remote printing. The printers are equipped with a paper cutter ensuring operation ergonomics. The set includes: RTP-RU80: printer; power supply; cable with a plug of European standard, type C or E/F; USB cable; RS232 cable, female/ male; 80 mm thermal paper, 1 roll; RTP-UEW80: printer; power supply; cable with a plug of European standard, type C or E/F; USB cable; 80 mm thermal paper, 1 roll. *RS 232 port comes in a female version

This is the first receipt printer of RADWAG production. We offer two models which differ in terms of (more) communication interfaces: RTP-RU80 – RS 232* and USB, RTP-UEW80 – USB, Ethernet and Wi-Fi. The printers communicate with all RADWAG laboratory balances and industry scales. Their connection and configuration is intuitively easy and takes barely few moments (Plug and Play). Communication via Wi-Fi enables remote printing. The printers are equipped with a paper cutter ensuring operation ergonomics. The set includes: RTP-RU80: printer; power supply; cable with a plug of European standard, type C or E/F; USB cable; RS232 cable, female/ male; 80 mm thermal paper, 1 roll; RTP-UEW80: printer; power supply; cable with a plug of European standard, type C or E/F; USB cable; 80 mm thermal paper, 1 roll. *RS 232 port comes in a female version

RFID is a proximity (contactless) tag with a microprocessor (chip) and an antenna. It does not emit  (more)a signal by iitself - it uses radio waves of a specific frequency for identification (passive tag). Application The RFID tag* allows access to defined capabilities by radio-frequency identification of a: • Specific person - Simply close the RFID tag to the terminal to access the data. This way don't have to enter your name and password every time you want to log in. This means data security and time saving; • Spiecific access code - You can use the RFID tag to mark specific goods or recipe ingredients in the database. This solution guarantees error-free formulation and reduces the procedure time. *RFID ISO/IEC 14443 Type A, 13,56 MHz How to Use RFID Tag with ELLIPSIS Balances? 1. Click the Parameters field and then the Operators field. 2. Add an operator and fill in your data. 3. Click the Card no. field and close the tag to the terminal. 4. Click to confirm the settings. Benefits In short, RFID technology ensures data security through 100% user identification and eliminates errors due to the "human factor". In addition, it optimizes work time and improves effciency, and above all, it offers endless possibilities.

Reference material Sodium Chloride (NaCl) at a concentration of 9 or 10%. It is colourless, clear l (more)iquid with the density of 1.07 g/cm3 and certified moisture content. The substance is used for verification of each moisture analyzer operation.

PT0455 Cable is used to connect the 5Y series balance or the PUE CY10 terminal to a RADWAG RTP print (more)er. Its standard length is 1,8m.

PT0454 Cable is used to connect the 5Y and CY10 series balance to a communication module Media Box  (more)IM02.1. Its standard length is 0,6 m.

PT0443 Cable is used to connect the 5Y series balance or the PUE CY10 terminal to a computer. Its st (more)andard length is 1,8 m. Optionally, the cable is used to connect the 5Y series balance or the PUE CY10 terminal to: AS X2 and AS R series balances PS X2 i PS R series balances PM C32 series balances WLC and WTC series balances, and C315 series scales MAS and MPS series weighing modules

Paper for RTP printer - 80mm.

RS 232 cable for connecting a balance/scale (PUE C/31 terminal) to an Epson printer. Standard cable  (more)length: 1,7m. Compatible with: - Scales operated by means of PUE C31 terminal - Scales operated by means of PUE 7.1 terminal - PUE C31 terminal - PUE 7.1 terminal

RS 232 cable: Balance - computer. Standard cable length: 1.7 m. Compatible with: - Scales with PUE C (more)315 terminal - PUE C315 terminal