Radwag HX5.EX-1.4P2.6000.C1 Beam Scale

Beam scales H315/4P2 series is stable and proved four load cells weighing solution with more versati (more)le application than standard pallet scales. The adjustable distance between the beams (up to 5 meters) enables fitting the H315/4P2/H scales to different loads (cases, long bars, heavy sections). The load to be weighed can be placed on the beams by a standard fork-lift truck. Beam scales H315/4P2/H series is manufactured in stainless steel version. Optionally, the number of beams in a scale can be increased to 4. Beam scales features handles for easy transporting the scales to its place of use. The scales comes standard with an indicator PUE H315 in stainless steel housing, featuring backlit LCD display and function buttons. The indicator is installed on a long cable. The scale is powered from mains 230V AC, RS 232 interface comes standard. Scales is available in dual range version on surcharge.

Beam scales C315.4P2 series is stable and proved four load cells weighing solution with more versati (more)le application than standard pallet scales. The adjustable distance between the beams (up to 5 meters) enables fitting the C315.4P2 scales to different loads (cases, long bars, heavy sections). The load to be weighed can be placed on the beams by a standard fork-lift truck. Beam scales C315.4P2 series is manufactured in mild steel powder coated version. Optionally, the number of beams in a scale can be increased to 4. Beam scales features handles for easy transporting the scales to its place of use. The scales comes standard with an indicator PUE C315 series featuring backlit LCD display and function buttons. The indicator is installed on a long cable. The scale is powered from mains 230V AC, RS 232 interface comes standard. Scales is available in dual range version on surcharge.

HX7.4P2 H is a beam scale made of stainless steel. 4-load-cell, 2-component mechanical design stands (more) for high measurement accuracy. The weights may be loaded onto the pan using a forklift or a transporter crane, supplementary handles significantly facilitate the transport. The device has been fitted with a 7" colour display and a diode bar graph. Blinking green and red diodes show current load mass, the mass is presented in reference to the scale range or declared minimum and maximum thresholds. At the back of the housing there are hermetic connectors of RS232, RS485, USB and Ethernet communication interfaces, plus digital inputs/outputs and analogue output. This enables cooperation with external devices such as barcode scanners, printers, external displays, control buttons, light signalling towers, other controlling/signalling devices, systems for automatic process control and superior IT systems. With use of the bracket you can either place the indicator at any flat horizontal surface, or fix it to the wall adjusting the tilt respectively to suit your needs. The terminal's software allows carrying out processes such as weighing, parts counting, dosing, labelling, formulations and percent weighing. Indicator’s system of information is based on databases (users, products, weighings, packaging, formulations, customers) and ALIBI memory which guarantees stored data safety.

The HX7.4P H pallet scale is outfitted with a 4-load-cell mechanical design, made of AISI304 stainle (more)ss steel, which has been invented for weighing pallets. The scale is mainly intended for Euro and transport pallets of respective size, i.e. 800 × 1200 mm. The load can be put onto the pan using a forklift. The scale is controlled via a cutting-edge indicator, the PUE HX7 offering a 7" graphic display and a diode bar graph which signals a current load mass related to the scale range or declared minimum and maximum thresholds. At the back of the housing there are hermetic connectors of RS232, RS485, USB and Ethernet communication interfaces, plus digital inputs/outputs and analogue output. This enables cooperation with external devices such as barcode scanners, printers, external displays, control buttons, light signalling towers, other controlling/signalling devices, systems for automatic process control and superior IT systems. With use of the bracket you can either place the indicator at any flat horizontal surface, or fix it to the wall adjusting the tilt respectively to suit your needs. The terminal's software allows carrying out processes such as weighing, parts counting, dosing, labelling, formulations and percent weighing. Indicator’s system of information is based on databases (users, products, weighings, packaging, formulations, customers) and ALIBI memory which guarantees stored data safety.

The HX5.EX scale is a modern weighing instrument assuring fast and reliable measurement in hazardous (more) areas classified as zones 1/21 and 2/22. To ensure precision and excellent measurement repeatability, high quality electronic components are used. The weighing platforms offered in wide range of dimensions and maximum capacities, this combined with excellent metrological parameters enables easy selection of an instrument that meets the most demanding requirements. Standard version of the scale is equipped with 2 serial, intrinsically safe RS232 communication interfaces, and with one RS485 interface. They facilitate cooperation with equipment intended for operation in hazardous areas. Possibility to add digital inputs/outputs extends the range of instruments compatible with the indicator by automatic elements compliant with ATEX directive. More demanding customers can use the IM01.EX module, installed in the safe area, which extends the available connectors by Ethernet, USB, 4-20mA/0- 10V analog outputs, Profibus DP and additional digital inputs/outputs. This enables cooperation with external devices: barcode scanners, printers, external displays, control buttons, light signalling towers, other controlling/signalling devices, systems for automatic process control and superior IT systems. Scale operation requires use of a dedicated PM01.EX power supply, which is not a standard scale component. To operate the scale, order a selected type of the dedicated intrinsically safe power supply. Power supply types: PM01.EX-1 - power supply for operation in ATEX area. Used when it is required to connect the power supply to voltage source placed in hazardous area. PM01.EX-2 - power supply for operation outside ATEX area. Used when power supply connection to voltage source is carried out outside hazardous area. Complex software enables carrying out many tasks connected with mass measurement, e.g. parts counting, checkweighing and statistics. The scales feature user-friendly graphic interface, which can be customized using widgets. This and the large colour display of high resolution guarantee easy and clear transmission of data on current process. Colour bar graph significantly influences performance by signalling whether the weighing result is within declared thresholds or not.

The HX5.EX scale is a modern weighing instrument assuring fast and reliable measurement in hazardous (more) areas classified as zones 1/21 and 2/22. To ensure precision and excellent measurement repeatability, high quality electronic components are used. The weighing platforms offered in wide range of dimensions and maximum capacities, this combined with excellent metrological parameters enables easy selection of an instrument that meets the most demanding requirements. Standard version of the scale is equipped with 2 serial, intrinsically safe RS232 communication interfaces, and with one RS485 interface. They facilitate cooperation with equipment intended for operation in hazardous areas. Possibility to add digital inputs/outputs extends the range of instruments compatible with the indicator by automatic elements compliant with ATEX directive. More demanding customers can use the IM01.EX module, installed in the safe area, which extends the available connectors by Ethernet, USB, 4-20mA/0- 10V analog outputs, Profibus DP and additional digital inputs/outputs. This enables cooperation with external devices: barcode scanners, printers, external displays, control buttons, light signalling towers, other controlling/signalling devices, systems for automatic process control and superior IT systems. Scale operation requires use of a dedicated PM01.EX power supply, which is not a standard scale component. To operate the scale, order a selected type of the dedicated intrinsically safe power supply. Power supply types: PM01.EX-1 - power supply for operation in ATEX area. Used when it is required to connect the power supply to voltage source placed in hazardous area. PM01.EX-2 - power supply for operation outside ATEX area. Used when power supply connection to voltage source is carried out outside hazardous area. Complex software enables carrying out many tasks connected with mass measurement, e.g. parts counting, checkweighing and statistics. The scales feature user-friendly graphic interface, which can be customized using widgets. This and the large colour display of high resolution guarantee easy and clear transmission of data on current process. Colour bar graph significantly influences performance by signalling whether the weighing result is within declared thresholds or not.

Brady’s IP Thermal Transfer Printer is a smart solution for printing high-quality labels. The Brady  (more)IP Printer is a fully integrated and easy-to-use printer, label and software system. The printer, labels and ribbon communicate with each other using SmartCell technology. The system has several features such as material recognition, automatic formatting and easy-to-use features for printing labels, sleeves and tags. The Brady IP Printer detects when labels and ribbon are loaded and displays user information on the LCD screen. The label information is sent to the software, which automatically completes the template and settings. Create data in the template, then lock and print. Load, lock and print. Barcode type: Codabar, Codablock F, Code 128A, Code 128B, Code 128C, Code 39, Code 93, Deutsche Post Identcode, Deutsche Post Leitcode, EAN/UPC Extension 2, EAN/UPC Extension 5, EAN-13, EAN-8 , FIM, GS1 DataBar, GS1 DataBar Limited, GS1 DataBar Stacked, GS1 DataBar Stacked Omnidirectional, GS1 DataBar Truncated, GS1-128, HIBC, Interleaved 2 of 5, JAN-13, JAN-8, MSI, Plessey, POSTNET, UPC- A, UPC-E, UPC-E0 Sensor material: Reflective sensor, Gap sensor Print technology: Thermal Transfer Print speed: 200 mm/s Resolution: 600 dpi Minimum label length: 5.1 mm Minimum liner width: 25.40 mm Maximum label width: 105.66 mm Maximum liner width: 106.68 mm Maximum labels per day: 5000 Maximum print width: 105.66 mm Maximum print length: 508.00 mm Maximum roll outer diameter: 203.20 mm Character styles: Arial, Courier New, Tahoma, Times New Roman, Trechuchet MS, Verdana Dimensions (WxHxD): 241 x 304 x 431 mm Weight: 5.9 kg

Radleys Lara Controlled Laboratory Reactor CLR This was removed from a university lab where it was s (more)urplus to requirements. The unit powers up but we were unable to test it further. It is in good cosmetic condition but has some marks from use.

Memmert UN160 Natural Convection Oven 161L, 115V Temperature Range Ambient +5°C to 300°C Convection (more) Type Natural Convection Chamber Volume 161 L Features - Large 161 L (6 cu.ft.) stainless steel chamber for versatile storage - Temperature range from +5°C above ambient to +300°C for diverse applications - 1 Pt100 sensor DIN class A in 4-wire circuit for precise monitoring - SingleDISPLAY digital PID-microprocessor controller with high-definition TFT display - Natural convection system for even heat distribution - Electronically adjustable air flap for controlled fresh air admixture - Supports up to 8 stainless steel grids with a max load of 463 lbs - Auto diagnostic system with electronic overtemperature monitor for reliable safety The Memmert UN160 Natural Convection Oven 161L, 115V is designed to meet versatile laboratory needs with a spacious 161 L (6 cu.ft.) stainless steel chamber that accommodates a variety of samples. With a precise temperature range from +5°C above ambient to 300°C, the oven is equipped with a Pt100 sensor DIN class A in a 4-wire circuit, ensuring reliable temperature control. The SingleDISPLAY digital PID-microprocessor controller provides easy adjustments via a high-definition TFT display, while the natural convection system maintains uniform heat distribution throughout the chamber. An electronically adjustable air flap allows controlled fresh air flow, and the oven supports up to 8 stainless steel grids with a maximum load capacity of 463 lbs. Safety is enhanced with an auto diagnostic system and electronic overtemperature monitor, making this oven an ideal choice for rigorous lab environments. INCLUDED: The Memmert UN160 Natural Convection Oven 161L, 115V includes: - 2 Stainless Steel Grids - Tilt Protection Wall Bracket - Calibration Certificate - Power Cord - Operator's Manual - Manufacturer's Documentation - 3 Year Manufacturer's Warranty

Measurement with application of 4 load cells is a guarantee of precise mass reading, regardless of l (more)oad positioning on weighing platform. H315.4 H/Z The platform scales H315.4 H/Z series is fully made of stainless steel profiles with stainless steel weighing platform. The scale features 4 load cells, and it is prepared for mounting as a pit version. The device comes standard with opening weighing platform enabling easy cleaning the area beneath the platform. The H315.4 H/Z series features a stainless steel terminal PUE H315 series with backlit LCD display and function buttons. The terminal is installed on a long cable for easy mounting it on a wall. The scale is powered from mains, RS 232 interface comes standard. Scales is available in dual range version on surcharge. The frame for recessing (foundation) is part of the set – you will receive it with the ordered scale.

Radwag laboratory holders have been designed to facilitate faster and more convenient weighing. They (more) ensure perfect and safe fixing of small vessels of typical and non-standard shapes. Features: Maximum weighing ergonomics Direct dosing of a sample into a vessel High efficiency, lower costs (minimized potential loss of samples during transfer) Direct dosing of samples into various vessels (test tubes, round flasks, flat flasks, plastic test-tubes, titration vessels) Laboratory holders are compatible with all Radwag analytical balances. Intended use: glass and plastic tubes filters other vessels