All categories

MVE CryoShipper 8.5 ltr Lab This item was removed from a university where it was surplus to requirem (more)ent. It is in good cosmetic condition, we are unable to test it at our facility. Neck Opening in (mm): 8.50 (216.0)Overall Height in (mm): 21.5 (546)Outside Diameter in (mm): 14.50 (369) ShipsLog 3 Temperature Lid fitted.The data log is not included. Last calibrated: 18:05:2021.

ADE Phase Shift MicroXAM-100 Surface Profile Mapping Microscope This system was removed from a unive (more)rsity lab where it was surplus to requirements. The stage is inoperable as the controller does not work. The stage does not move manually. For this reason it is sold for spares/repairs. Cosmetic and working conditions vary as stated below each item. ADE Phase Shift MicroXAM-100Model: MicroXAM-100 The item is in excellent cosmetic condition and shows no signs of damage.However, when switched on, the item does not power on. The item includes the following components: - Nikon CFWN 10x/20 Eyepiece x 2: Both eyepieces are in good condition with clear clarity.- 50AT NA 0.55 885 Objective: This objective is untested. - Phase Shift Technology Rotary Stage 4360: Model: Rotary Stage 4360Serial#: L56332-3021The rotary stage is in good cosmetic condition and shows no signs of damage.However, when switched on, it does not power on. - Javelin Video Monitor: Model: BWM9BXSerial#: 7070083The video monitor is in good cosmetic condition.It powers on with the power light illuminated. - Nikon Transformer and Nikon 50W AD Lamp: Model: UNBoth the transformer and the Nikon lamp are in good condition and fully functional.The light output can be adjusted fully. - AD Phase Shift Controller: Serial#: E71000-500 The phase shift controller is in good cosmetic condition.It powers on with the power light illuminated.Unfortunately, further testing could not be conducted.

This ThorLabs PBH52512 - Performance Series II Breadboard was removed from a university lab where it (more) was surplus to requirements. The unit is in good cosmetic condition with marks from use but has not been tested. Flat Dimensions: 1200 x 750 x 110 mmSerial Number: 079523Tapped Hole Size: M6Hole Centre Pitch: 25 mm

This Hewlett Packard Cohesive Technologies 1100 Series G1310A Isocratic Pump was removed from a univ (more)ersity lab where it was surplus to requirements. The item is in good cosmetic condition and powered up, as seen the item is missing the front door panel. We are unable to test this item further at our facility. Power supply included.

This Waters 70001117 High-Temperature Dual Ion Guide Assembly was removed from a university lab wher (more)e it was surplus to requirements. The item is in good cosmetic condition but due to the power supply not being included, we are unable to test, therefore the item is sold as Spares or Repairs. Power supply not included.

This Watson Marlow 205S Peristaltic Pump was removed from a university lab where it was surplus to r (more)equirements. The unit powers on and is in good cosmetic condition with minor marks from use. All buttons are responsive to the unit.

This Digital Instruments Signal Access Module lll was removed from a university lab where it was sur (more)plus to requirements. The lab confirmed the unit was working when last used, but it has not been tested at our facility. It is in reasonably good cosmetic condition but has some marks from use. System comprises; 6 x pairs low voltage inputs to the nanoscope controller (data signal)12 x pairs low voltage inputs from the nanoscope controller (control signals)6 x pairs of high voltage outputs from the nanoscope controller (piezo drive signals)6 x pairs of inputs to the sensor4 x pairs outputs from the sensor2 x ports to microscope controller1 x port to microscope1 x port to sensor

This Sutter Instrument Co. Model P-87 Flaming / Brown Micropipette Puller was removed from a univers (more)ity lab where it was surplus to requirements. The unit powers up and is in reasonably good cosmetic condition. It's operational but needs a replacement filament.Unable to test further at our facility.

This Hewlett Packard 5890 Series II Gas Chromatograph was removed from a university lab where it was (more) surplus to requirements. The unit powers up, and the GC oven is functional. (Digital thermometer not included). We are unable to test further at our facility. It is in good cosmetic condition.

Job Lot of STOE XRD Crystallography Parts Lab These items were removed from a university where they  (more)were surplus to requirement. All XRD items are in reasonably good cosmetic condition, none of them have been powered or tested. The PC has been powered on and has the following software installed:- Winxpow Software No password is required (press 'Cancel' when the computer asks for a password).This PC runs on Microsoft Windows 95. This item is also supplied with various keys and power cables.

Planer Kryo 560-16 Controlled Rate Freezer Lab This item was removed from a university where it was  (more)surplus to requirement. It is in good cosmetic condition and powers on, we are unable to test it further at our facility as it require a liquid nitrogen supply which we do not have available.

CAS BioMAT 2 Class 2 Microbiological Safety Cabinet Lab This was removed from a laboratory where it  (more)was surplus to requirements. The unit powers up and is in full working order. It is in good cosmetic condition, with some minor marks from use. Socket tester not included. Calibration date due: 29:02:2024. Internal Depth (cm) 106.0Internal Width (cm) 44.0Internal Height (cm) 51.0

This Malvern MSX Mastersizer Particle Size Analysis System was removed from a university lab where i (more)t was surplus to requirements. The lab reported it had not been used for a number of years, but was working when they last used it. The unit will likely require significant refurbishment, and for that reason it is sold for spares/repairs. Included are; 1 x Malvern Particle Size Analysis UnitModel MSXThe unit powers on and is in good cosmetic condition. 1 x Malvern Small Volume Sample Presentation Unit.DIF 2000The unit powers on and is in good cosmetic condition. It's in working order. Accessories:1x Laser enable key (850)1x Malvern chamber Rittal key1x Case strap2x Case keys 3x Lenses1x 45mm1x300mm1x pinhole All lenses appear to be in good cosmetic condition. Lens caps:3x 67mm1x 58mm1x 46mm 1x 30ml clear plastic bottle (empty)6x Clear tubing (various lengths)4x Allen keys (various sizes)2x wooden focal cassettes 2x cotton buds1x Glass cassette1x Metal arm/leaver (32908-29)1x T1A 250v quick blow fuse Floppy discs12x Microsoft software6x Malvern software1 x Fast internet Access Supra Install CD1x Supra Express Manual 4x User Manuals:The units are in good cosmetic condition. It is unclear if there is missing information from the manuals as some folders contain loose papers.

Olympus IX70 Inverted Fluorescence Microscope This item was removed from a university lab where it w (more)as surplus to requirements. The microscope is in reasonably good cosmetic condition but some issues were found during servicing. • Fluorescence attachment & mercury lamphouse present but no mercury power supply starter.• 2 filter cubes present – U-MWG2 & U-MWB• Some evidence of corrosion due to salt or other liquid.• Coarse focus very stiff – clutch lever stuck fast.• Transmitted light power supply is good.• Eyepiece adjusters are stuck. Therefore, it is listed as Spares/Repair. Includes:- Olympus BX 100W HBO Mercury Microscope Lamp U-ULS100HG (no power supply included) - 2 x WH10X-H/22 eyepieces - Fluorescence attachment and mercury lamphouse (no mercury power supply starter) - 2 filter cubes: U-MWG2 and U-MWB Condition Notes:- Missing stage, objectives, and condenser - Some corrosion present, likely due to salt or liquid exposure - Coarse focus is very stiff, with a stuck clutch lever - Transmitted light power supply is functional - Eyepiece adjusters are stuck

*No weight* Mach Aire Air Cabinet Lab This item was removed from a university where it was surplus t (more)o requirement. It is in good cosmetic condition. It is in good working order and previously housed a Beckman Coulter Biomek. The item has been dismantled for ease of transportation, comprising all framework, hex screws, and windows.

Olympus U-RFL-T Microscope Power Supply + U-LH100HG Lamp These were removed from a university lab wh (more)ere they were surplus to requirements. The units are in good cosmetic condition, but they do have various marks and signs of use. The power supply and lamp both power up fine. Included are;1 x Olympus U-RFL-T.1 x Olympus L-LH100HG. We cannot confirm how long the lamp has been used, as the timer was reset before we received the item.

B.O.B Stevenson Type 7736 MN 40500 Centrifugal Fume Extraction Fan This item was removed from a univ (more)ersity where it was surplus to requirement. It is in good cosmetic condition, we are unable to test it further at our facility.

Integrated BMS Jet Nozzle Test Facility -CP3 Lab This item was removed from a university where it wa (more)s surplus to requirement. It is in good cosmetic condition, we are unable to power it on or test it further at our facility. The unit has no power cable. Therefore, it is listed as Spares/Repair. Includes operation keys. Door key not included but can be opened with a standard control cabinet key.

B.O.B Stevenson LTD 4047 MN 80355 Centrifugal Fume Extraction Fan Lab This item was removed from a u (more)niversity where it was surplus to requirement. It is in good cosmetic condition, we are unable to test it further at our facility.

Lot Of Heraeus Centrifugal Rotor Buckets And Tube Holder Bucket Inserts Lab These items were removed (more) from a university lab where they were surplus to requirement. All items are in good cosmetic condition but have not been tested. The items included are as follows: - 4 x Heraeus #7570 E Rotor Buckets (max capacity of 600g) - 3 x Heraeus #8030 Rotor Buckets (max capacity of 510g) - 3 x Tube Holders For 15-25ml Tubes - 4 x Tube Holders 50ml Tubes

Zeiss Axioskop EL-Einsatz Microscope Lab This item was removed from a university where it was surplu (more)s to requirement. It is in good cosmetic condition and powers on, we are unable to test it further at our facility. This microscope does not include any objectives, it was tested with an in-house Achrostigmat 10x /0.25.

Odessy LI-COR Unit Model-9120 Lab This item was removed from a university where it was surplus to re (more)quirement. It is in good cosmetic condition and powers on, we are unable to test it further at our facility as it requires software. Software not included.

Leybold Trivac Vacuum Pump Type-D65BCS fitted w/ Exhaust filter with lubricant return ARS 40-65 Lab  (more)This item was removed from a university where it was surplus to requirement. It is in reasonably good cosmetic condition and powers on, but it frequently stalled during testing. We believe this could be sorted with a service. Therefore, it is listed as Spares/Repair. A 4 Pin 3 Phase plug was fitted for the purpose of testing, it was removed prior to being stocked. it is not included. This item is fitted with the following:- Leybold Exhaust filter with lubricant return ARS 40-65

Emtek P100 Microbial Air Sampler Lab This item was removed from a university where it was surplus to (more) requirement. It is in reasonably good cosmetic condition and powers on, we are unable to test it further at our facility. As seen, there is damage sustained to the display screen, however, it does not impact its functionality. The Unit comes with a case, 18V Charger and a Remote

Wave Bioreactor System 2/10 EH Lab This system was removed from a university where it was surplus to (more) requirement. All units are in good cosmetic condition and powered up, we are unable to test this system further at our facility. The system comprises the following: Wave Bioreactor System 2/10 EH BASE2/10EHCode: 28943517S/N: 1578302 PERFCONT2ECode: 28943517S/N: 1578302 CO2MIX20Code: 28945751S/N: 1475936

Pike Technologies MIRacle ATR reflection Accessory Kit Lab This item was removed from a university w (more)here it was surplus to requirement. All items included are in good cosmetic condition, however we are unable to test them at our facility. The components included are as follows: - Pike MIRacle - ATR - Allen key set - Replacement tubing The items come in a protective case.

Carbolite Furnace Oven ELF 11/14 1100˚C Temp 3Kw Lab This item was removed from a university where i (more)t was surplus to requirement. The unit powers up and is in good working order. It is in good cosmetic condition internally and externally.

Zeiss Axioskop Microscope w/ J04Z0H Power Supply Lab This item was removed from a university where i (more)t was surplus to requirement. Both the microscope and power supply are in good cosmetic condition and full working order. The previous client has stated that this microscope was in full working order when it was last used. It has been tested with an in-house objective, which is not included. Includes the following: 1 x Zeiss Axioskop Microscope-2 x Zeiss PL 10 X/ 20 Eyepiece 1 x Zeiss J04Z0H Power Supply 1 x Zeiss 12V 100W Halogen HAL Lamphouse

Minebea Intec Combics 2 Explosion Proof Scale Model CAW2S1-30ED-I Lab This item was removed from a u (more)niversity where it was surplus to requirement. It is in good cosmetic condition and in working order. (The test calibration weight is not included.)

Minebea Intec Combics 2 CAW2S1-30ED-I Weighing Scale Lab This item was removed from a university whe (more)re it was surplus to requirement. It is in good cosmetic condition and is in good working order. (Calibration weights are not included) Model - CAW2S1-30ED-IS/N -35566690