All categories

The PowerPac Basic power supply is designed to provide constant voltage or current electrophoresis a (more)pplications. The power supply operates at the value specified for the constant parameter, with limits for the other parameters. To prevent damage to the electroferese cell, the PowerPac Basic provides automatic crossover to constant current or constant voltage depending on which set limit is first reached. If the set limit of the non constant parameter is reached, the power supply will switch, making the limiting non constant parameter the new constant. Output specifications: Voltage: Adjustable from 10 to 300 volt, in 1 volt increments Current: Adjustable from 4 to 400 mA, in 1 mA increments Power: 75 W

Type of movement: orbital Shaking stroke: 4.5 mm Permissible shaking weight (incl. attachment): 0.5  (more)kg Permissible ON time: 100 % Speed range: 200 – 3000 rpm Speed display: scale Timer: yes Timer display: 7 segment LED Time setting range: 1 s – 999 min Operating mode: timer and continuous operation Touch function: yes Dimensions (WxHxD): 148 x 63 x 205 mm Weight: 2.9 kg

The peristaltic pump of the Cole Parmer type Masterflex is ideal for pumping corrosive, abrasive and (more) viscous liquids without damaging the pump. The Cole Parmer Masterflex can also be used in the pharmaceutical and biopharmaceutical industry. Speed: 6 – 3000 rpm Excluding pump head

Weighing capacity: 120 g Readability: 0,0001 g Linearity: ± 0,0003 g Reproducibility: 0,0002 g Stabi (more)lization time: 3 s Adjustment options: Internal calibration (automatic), Adjusting with internal weight (manual) Dimensions weighing surface (Ø): 91 mm Dimension (WxDxH): 213 x 333 x 338 mm Weight: 7 kg

Camera for a gel documentation system No software As-is

As-is

Head: Double Binocular Eyepiece: Zeiss Kpl 10x/18 Objectives: 2.5x/0.08, 10x/0.22, 40x/0.65, 100x/1. (more)25 Oil Final magnifications: 25x, 100x, 400x, 1000x Nosepiece: Quadruple Focusing: Coaxial coarse and fine control knobs Illuminator: 12V Halogen illuminator

Capacity: 30 g/ 60 g/ 110 g/ 160 g Readability: 1 mg/ 2 mg/ 5 mg/ 10 mg Reproducibility: ±1 mg/ ±2 m (more)g/ ±5 mg/ ±10 mg Linearity: ±1 mg/ ±2 mg/ ±5 mg/ ±10 mg Response time: 2 sec Weighing plate: Ø 80 mm Weighing chamber height: 200 mm Weight: 5.5 kg

System consisting of: Dionex Ultimate SR-3000 Solvent Rack Dionex Ultimate LPG-3400MB Pump Dionex Ul (more)timate TCC-3000SD Column Compartment Dionex Ultimate MWD-3000 Diode Array Detector Software not included

1 2 3

The XN-2000 system is a combination of two analysis modules that can be used in clinical application (more)s specified in the specifications. The Rerun & Reflex configuration transforms the system into a superior solution for basic and comprehensive lab research. Because both modules process sample racks simultaneously, the system can handle any sample without any delay. The modules work perfectly together. And you don’t waste precious time even with abnormal samples. With integrated reflex measurement, you no longer have to manually select and reload samples. The reflex sampler automatically feeds the samples into the left module and performs the extended measurement. If there are no abnormal samples in the run, the system speeds up operation by processing standard samples only. Having two modules running at the same time means that you have more certainty about daily routines, because you always have an integrated backup solution at your disposal. To extend the reach of your laboratories, network your XN-2000 with other XNs to create multi-location installations. This way you can link specialized and central laboratories and upgrade the quality of your service. And thanks to our remote service, we can jointly define the level of support quality and guaranteed service response time, and ensure maximum system uptime. Principles and Technology: Fluorescent flow cytometry using a semi-conductor laser and hydrodynamic focusing in dedicated channels Parameters whole blood: WBC; RBC; HGB; HCT; MCV; MCH; MCHC; PLT (PLT-I, PLT-F); NEUT#, NEUT%; IG#, IG%; LYMPH#,LYMPH%; MONO#, MONO%; EO#, EO%; BASO#, BASO%; NRBC#, NRBC%; RDW-SD; RDW-CV;MPV; RET#, RET%; IRF, RET-He; IPF#, IPF% Parameters blood bank mode: WBC, RBC, HGB, HCT, PLT Capacity: Bidirectional, continuous-feed sampler holds up to 50 samples (5 X 10-tube rack) Throughput whole blood mode: 100 samples/hour/unit Throughput blood bank mode: RBC component – 79 samples/hour without WBC; 33 samples/hour with WBC PLT component – 62 samples/hour without WBC; 19 samples/hour with WBC Sample aspiration volume: Whole Blood mode: 88 µL, RBC Pack measurement: 150 µL, PLT Pack measurement: 205 µL, Pre-dilute Mode: 70 μL Quality Control: XN CHECK: complete tri-level QC product for all CBC, Diff, RET and PLT parameters Platelet CHECK: bi-level QC product for Blood Bank mode Comprehensive QC files including current and new lot feature 99 total files including 5 X-barM files Including software

The SciLog SciCon combines temperature sensing capabilities with conductivity sensing capabilities i (more)n a compact, disposable, single-use package. Sensitivity Range 1 µS/cm to 200 mS/cm 0.1 µS/cm resolution Operating Mode/Auto Range Display Conductivity: 1 µS/cm to 200 mS/cm Temperature: 0°C to 50°C Compatible with 5 types of single use sensors (not included) Connector type Luer Compatible Tubing Sizes: ID 0.03¨ to 0.31¨ Max. Flow Rate: 1 L/min Max. Pressure: 60 psi Part Code (Packs of 5): 080-599PSX-5 Connector type 3/8¨ Barb Compatible Tubing Sizes: ID 0.31¨ to 0.38¨ Max. Flow Rate: 8 L/min Max. Pressure: 60 psi Part Code (Packs of 5): 080-594PSX-5 Connector type 1/2¨ Barb Compatible Tubing Sizes: ID 0.50¨ Max. Flow Rate: 17 L/min Max. Pressure: 60 psi Part Code (Packs of 5): 080-595PSX-5 Connector type 3/4¨ Tri-Clover (TC) Compatible Tubing Sizes: Tubing with 3/4¨ TC Max. Flow Rate: 31 L/min Max. Pressure: 60 psi Part Code (Packs of 5): 080-596PSX-5 Connector type 1¨ Tri-Clover ‘Ladish Compatible Tubing Sizes: Tubing with 1¨ TC Ladish Max. Flow Rate: 60 L/min Max. Pressure: 60 psi Part Code (Packs of 5): 080-597PSX-5

Weighing range: 0 to 4100 g Readability (0 – 600 g): 0.01 g Readability (600 – 4100 g): 0.1 g Reprod (more)ucibility (0 – 600 g): 0.01 g Reproducibility (600 – 4100 g): 0.03 g Linearity (0 – 600 g): ± 0.05 g Linearity (600 – 4100 g): ± 0.02 g Weighing platform: 170 mm Dimensions (WxDxH): 194 x 316 x 68 mm Weight: 3.8 kg Including Mettler LabPac – M terminal

Temperature range: Ambient to 320°C Speed range: 100 – 2000 rpm Max. stirring capacity H₂O: 10 L Pla (more)te dimensions: Ø 125 mm Plate material: Stainless steel Dimensions (WxDxH): 168 x 220 x 105 mm Weight: 2,4 kg

Partec Cyflow Space FACS stand alone system with Analytical cuvette. Equipped with: 4 measurable par (more)ameters: FCS, SSC, D3 and D4 bandpass filters (expandable to 9 parameters). Blue diode laser 20 mW 488 nm (expandable to 3 laser light sources). Sorting unit with green laser (sorting cuvette not included, but can be ordered from Sysmex). Fujitsu PC with Flowmax software for flow data analysis. Bottle rack for 1 liter bottles (for e.g. sheat fluids, buffers and waste).

The CyScope HP is a uniquely innovative microscope, offering LED fluorescence and light microscopy i (more)n a compact design and implementing sophisticated optics. It employs incident light (e.g. UV, royal blue, blue, green, red) and transmitted light detection, either simultaneously or separately. The blue (470nm) and green (528nm) LEDs with their extremely long life of several thousand hours work in a high-power / high-current mode, cooled by a miniature fan. Eyepieces: Partec 10x/23 mm Head: Biinocular 45° angled tubes with interpupillary distance from 55 to 75 mm Nose piece: Four-way Objectives: 20x/0.40, 40x/0.65, 100x/1.25 Oil Focus adjustment: Coaxial 25 mm coarse and fine adjustment Illumination: Transmitted LED set for Köhler illumination. Fluorescent: High Power Green LED (528 nm) Excitation and Emission Set, High Power Blue LED (470 nm) Excitation and Emission Set, Camera: CMOS (color depth 36 bits, 1/2,5” CMOS chip, 2592 x 1944 pixel, including software)

Syringe Size: From 10 µl to 50/60 ml Flow Rate Range (Min/Max): 0.0014 µl/hr with 0.5 µl syringe to  (more)26.55 ml/min with 50/60 ml syringe Maximum Force: 8 kg Maximum Pressure: 8 p.s.i. with 50/60 cc syringe; 100 p.s.i. with 1 ml syringe Step Rate (Min/Max): 1 pulse in 27.6 sec / 200 steps/sec Pusher Advance/Step: 0.8 µm pusher advance per motor step Pusher Travel Rate (Min/Max): 0.7 µm/min to 15 mm/min Dimensions (HxWxD): 114 x 229 x 114 mm Weight: 2.1 kg

Chemically resistant, oil-free diaphragm vacuum pump used for a wide range of laboratory application (more)s. Especially suited for handling aggressive vapors, it features Aluminum alloy, PTFE-coated diaphragms and FFPM valves. 100% oil-free transfer – thereby pure transferring, evacuation and compression of gases High level of vapor and condensate compatibility Aluminum alloy pump head combined with PTFE-coated diaphragm Environmentally friendly High level of gas tightness Flow rate: 10 l/min.(at atm. pressure) Operating pressure: 1 bar Ultimate vacuum: 8,0 mbar Pump head: Aluminum alloy Diaphragm: PTFE-coated Valves: FFPM Dimensions (LxHxW): 281 x 187 x 140 mm Weight: 6.9 kg

Agilent 1100 system consisting of: 1x Agilent 1100 Degasser type G1379A 2x Agilent 1100 Isocratic Pu (more)mp type G1310A 1x Agilent 1100 Variable Wavelength Detector type G1314A 1x Agilent 1100 Fluorescence Detector type G1321A 2x Solvent tray Manual injector with 1 ml sample loop Laptop Agilent 1100 IsoPump: Hydraulic system: Dual piston in series pump with proprietary servo-controlled variable stroke drive, floating pistons and active inlet valve Setable flow range: 0.001 – 10 ml/min, in 0.001 ml/min increments Flow range: 0.2 – 10.0 ml/min Flow precision: < 0.3 % RSD (typically 0.15 %), based on retention time, at 1 ml/min Pressure: Operating range 0 – 40 MPa (0 – 400 bar, 0 – 5880 psi) up to 5 ml/min, Operating range 0 – 20 MPa (0 – 200 bar, 0 – 2950 psi) up to 10 ml/min Pressure pulsation: < 2 %amplitude (typically < 1 %), at 1 ml/min isopropanol, at all pressures > 10 bar (147 psi) Compressibility compensation: User-selectable, based on mobile phase compressibility Recommended pH range: 1.0 – 12.5, solvents with pH > 2.3 should not contain acids which attack stainless steel Dimensions (HxWxD): 140 x 345 x 435 mm Weight: 11 kg Agilent 1100 VWD: Detection type: Double-beam photometer Light source: Deuterium lamp Wavelength range: 190–600 nm Short term noise (ASTM): ± 0.75 x 10-5 AU at 254 nm Drift: 3 x 10-4 AU/hr at 254 nm Linearity: > 2 AU (5%) upper limit Wavelength accuracy: ± 1 nm Self-calibration with deuterium lines, verification with holmium oxide filter Band width: 6.5 nm typical Flow cell: 14-µl volume, 10-mm cell path length and 40 bar (588 psi) pressure maximum Dimensions (HxWxD): 140 x 345 x 435 mm Weight: 11 kg Agilent 1100 FLD: Detection type: Multi-signal fluorescence detector with rapid on-line scanning capabilities and spectral data analysis Light source: Xenon flash lamp Pulse frequency: 296 Hz for single signal mode, 74 Hz for spectral mode Excitation monochromator: range; 200 – 700 nm and zero-order,  bandwith; 20 nm, monochromator; concave holographic grating F/1.6 blaze 300 nm Emission monochromator: range; 280 – 900 nm and zero-order,  bandwith; 20 nm, monochromator; concave holographic grating F/1.6 blaze 400 nm Spectrum acquisition: Excitaiotn or emmision spectra, scan  speed; 28 ms per data point, step size; 1 – 20 nm Wavelength characterisric: Repeatability; ±0.2 nm, accuracy; ±3 nm Flow cell: 8 µl volume and 20 bar pressure, quartz Dimensions (HxWxD): 135 x 345 x 435 mm Weight: 11.5 kg

The Invitrogen Tali Image-Based Cytometer is a 3-channel (bright field, green fluorescence, red fluo (more)rescence) imaging platform that performs suspension cell–based assays right from the benchtop. With the Tali cytometer, three-parameter population analysis can be completed in approximately 1 minute per sample using 25 μL sample volumes. In addition to the bright field channel, the Tali Image-Based Cytometer features two fluorescent channels (green and red), enabling it to simultaneously count green or red fluorescent stains, as well as cells expressing GFP and RFP. The Tali also offers an intuitive user interface, provides the option to save data and generate a report, which can then be transferred to a PC using the USB drive. Other features include presenting comprehensive data with graphic reports and allowing the export of data as .csv (comma separated value), .jpg, .fcs, and .pdf files for archiving and sample comparisons. Processing time: 10 seconds to 2 minutes, depending on the number of fields captured Sample concentration range: 1 x 105 – 1 x 107 cells/mL Particle/cell diameter range: 5 – 60 µm Required sample volume: 25 µL Optics: 3 channels (bright field, green fluorescence, red fluorescence) Excitation: Green channel LED (458 ± 20 nm), Red channel LED (530 ± 20 nm) Green channel filter: 466/40 EX, 495 LP Di, 525/50 EM Red channel filter: 543/22 EX, 580 LP Di, 585 LP EM Camera: 1.3 Mega pixels, 4x objective, 4x or 16x digital zoom Dimensions (WxDxH): 290 x 450 x 290 mm Weight: 9 kg

Head: Trinocular Eyepiece: Olympus WHK 10x/20 L Objectives: DPlan 10x/0.25, APlan 40x/0.65, SPlan Oi (more)l 100x/1.25, DPlanApo UV Oil 20x/0.80, DApo UV Oil 40x/1.30, DApo UV Oil 100x/1.30 Final Magnifications: 100x, 400x, 1000x Nosepiece: Six-way Focusing: Coaxial coarse and fine control knobs Illuminator: Fluorescence and Halogen

The uScopeMXII digital microscope produces high-quality images while allowing you to scan a region o (more)f interest. This digital workhorse offers unprecedented capability in a form factor ideal for desktop PC users. A little larger than an external hard drive, the uScopeMXII delivers high-resolution digital images from standard glass slides. Illumination: LED (White) Camera Resolution: 960×540 Field Image Format: JPEG, PNG (lossless) Scanned Image Capture: Single Field, Tiled Fields, Overlapped Fields, Underlapped Fields Viewing Formats: Single Field, Tiled Fields, Deep Zoom Image Export Formats: JPG, BMP, PNG, TIFF

AKTA Purifier FPLC System

g=2000×1 battery-operated

Dimensions (WxHxD): 600 x 600 x 580 mm

Flow rate: 0.1 to 50 mL/min Maximum operating pressure: 1 MPa Tubing ID (flow path): 0.75 mm Single  (more)wavelength detection: Mercury lamp and 254 and 280 nm filters included Flow path length: 2 mm Buffer selection: 2 inlets pH stability long term: 2 to 12 Viscosity: Max 10 cP (<10mL/min), max 5 cP (>10mL/min) Dimensions (WxHxD): 400 x 530 x 250 mm