Easily list your scientific equipment

Top suppliers for laboratory & industry

New and used instruments

Marketplace
Analytics

All categories

Elga Purelab Chorus 1 Pure Water System-cover
Elga Purelab Chorus 1 Pure Water System

When you require the ultimate in water purity, PURELAB Chorus 1 provides the perfect solution. Consi (more)stently delivering water purity of 18.2 MΩ.cm (Type I+/I) and underpinned by the advanced PureSure deionization system, the PURELAB Chorus 1 enables you to focus on attaining accurate results while ensuring an uninterrupted workflow. Advanced PureSure Deionization – Eliminates trace ions that leach into your water and provides advanced warning to change the purification packs. Fully Recirculating –  Ensuring microbial purity and guaranteeing pure water at the point-of-use. Real-time TOC Monitoring – Provides complete confidence in organic purity. Integrated Filtration – Ultrafiltration or microfiltration filters out endotoxins, proteins, nucleases, and particulates. Full Spectrum UV Treatment Dispense Flowrate Up to 2.0 l/min Inorganics (at 25°C): 18.2 MΩ.cm Total organic carbon (TOC): 1 – 3 ppb Bacteria: <0.001 CFU/ml Bacterial Endotoxin: <0.001 EU/ml pH: Effectively neutral Particles: < 0.05 µm RNase: <1 pg/ml DNase: <5 pg/ml Purification pack capacity: Liters to 18.2 MΩ.cm = 94,100/(µS/cm + (2.3 x ppm CO2)) Source – originally from potable supply, then pretreated: Preferably RO produced by PURELAB Chorus 3 or filtered service deionization (SDI) or distilled. Fouling index (max): 1 (5 – 10 micron membrane prefilter is recommended for all non-RO feeds Service deionization (SDI) – MΩ.cm: 1 MΩ.cm minimum resistivity at exhaustion Reverse Osmosis (RO) – µS/cm: Recommended <30 µS/cm Free Chlorine: 0.05 ppm max TOC: <50 ppb max (RO feed) Carbon dioxide: 30 ppm (max recommended) Silica: 2 ppm (max recommended) Particulates: Filtration down to 5 – 10 micron advisable to protect internal and/or point of use filters Temperature: 1 – 35°C (Recommend 10 – 15°C) Flowrate (maximum requirement): 130 l/hr (34 USG) Drain requirements: Up to 2 l/min (0.5 USG) Feedwater pressure: 0.7 bar (10 psi) maximum; 0.07 bar (1 psi) minimum Dimensions (HxWxD): 435 x 375 x 340 mm Weight: 19 kg Excluding new filters

€1,299.00 ex VAT
Netherlands
general laboratory equipment other
Sonics Vibra Cell VC375 Ultrasonic Processor-cover
Sonics Vibra Cell VC375 Ultrasonic Processor

The Sonics VC-375 is an ultrasonic generator which converts 50/60 Hz voltage to high frequency elect (more)rical energy. This alternating voltage is applied to disc-shaped ceramic piezoelectric crystals within the converter, causing them to expand and contract with each change of polarity. These high-frequency longitudinal mechanical vibrations are amplified by the probe (horn) and transmitted into the liquid as alternating high and low pressure waves. The pressure fluctuations cause the liquid molecule cohesive forces to break down, pulling apart the liquid and creating millions of micro-bubbles (cavities), which expand during the low pressure phases, and implode violently during the high pressure phases. As the bubbles collapse, millions of microscopic shock waves, micro jet streams, eddies and extremes in pressures and temperatures are generated at the implosion sites and propagated to the surrounding medium. Although this phenomenon, known as cavitation, lasts but a few microseconds, and the amount of energy released by each individual bubble is minimal, the cumulative amount of energy generated by the imploding cavities is extremely high and many times that generated in an ultrasonic bath. When used with environmentally safe aqueous cleaning solutions, the Vibra-Cell becomes a powerful cleaning tool, capable of removing the most tenacious contaminants from normally inaccessible locations. Unlike ultrasonic baths, which dissipate the vibrational energy over a large area, the Vibra-Cell probe focuses the energy to create a concentrated, high intensity cleaning zone. Probe horn not included.

€749.00 ex VAT
Netherlands
general laboratory equipment other
Millipore Elix 20 Water Purification System-cover
Millipore Elix 20 Water Purification System

Elix systems have been designed to deliver the highest pure water quality for your regular laborator (more)y applications and instrument feed. Elix is suited to every user’s needs in today’s demanding laboratory environment. Elix water quality is ideal for the preparation of reagents and buffers, for microbiology media, hydroponics or histology. It is also the best feed for all Milli-Q and Super-Q ultrapure water systems, as well as instruments such as glassware washers, autoclaves and hydrogen generators. Superior and consistent Type 2 water quality – “Superior”, as resin beads are not degraded by exposure to harsh regeneration chemicals. “Consistent”, as the continuous regeneration avoids the drawbacks of quality variations from resin exhaustion. Cost & labor savings – Elix module contains special carbon beads at its cathode therefore, does not require water softening. Its self-regeneration technology avoids the hassle and costs around DI cartridge replacement. Elix is “green” consuming low energy with a small carbon footprint. Long lasting technology – thanks to its proven design, the module continuously regenerates its resin beads without the need for any maintenance. Elix pure water is irradiated by a bactericidal UV lamp before entering the storage tank. The reservoir design maintains consistent purity of stored water. The vent filter provides effective protection against airborne contaminants and the ASM, Automatic Sanitization Module, prevents biofilm formation. Elix water can then be sent by a distribution pump to feed instruments or a distribution loop. They can be integrated into a centralized system, providing total control of all parameters within the system itself as well as within the external pure water distribution loop. Water Specifications: Resistivity at 25 °C: > 5 MΩ•cm TOC: < 30 ppb Bacteria: < 10 CFU/mL Silicate removal: > 99.9 % Production flow Rate: 20 L/h Feed water: Water quality: Potable tap water Feed water conductivity at 25 °C: < 2000 µS/cm Feed water pressure: 2 – 6 bar Feed water temperature: 5 – 35°C Feed water chlorine: Application Specialist will determine pretreatment required Feed water fouling index: Application Specialist will determine pretreatment required Feed water pH: 4 – 10 pH units Feed water connection: ½ in Gaz M System Specifications: Dimensions (H x W x D): 734 x 662 x 441 mm Operating weight: 45 – 62 kg Data port connection: RS232 Including 200 L storage tank Excluding new filters

€2,299.00 ex VAT
Netherlands
mills
Disclaimer: QuestPair assumes no responsibility or liability for any errors or omissions in the content of this site. The information contained in this site is provided and presented on an “as is“ basis with no guarantees of completeness, accuracy, usefulness or timeliness.

Customer Service

Here to help you with: Product Inquiries, Shipping & Support, Technical Support, Business Inquiries and Press.

We are available to assist you Mon-Fri, 10am - 5pm CET.

+31 (0) 73 7114717
[email protected]