All categories

Labconco 332691101 6' Purifier Cell Logic+ Class II Type A2 Biosafety Cabinet with Scope-Ready, Serv (more)ice Fixtures, Vacu-Pass Portal, and Base Stand, 115V, 60HzFeatures - Electronically Commutated Motor (ECM) & Constant Airflow Profile (CAP) airflow monitoring system - Intrinsically-safe negative pressure design - Air-Wave™ Entry System & Contain-Air™ Negative Pressure Channel - Supply and exhaust 99.99% efficient HEPA filters. 99.999% efficient ULPA filters available - Interior-mounted, line-of-sight color LCD with MyLogic OS. Displays filter life, status messages for alarm conditions and alerts. 8 languages available - Glare-free LED lighting located outside the contaminated work area - Fully-closing, clear 1/4" tempered safety glass sash - Curved stainless steel inlet grille with Reserve-Air Secondary Airflow Slots - Smart-Start™ System user-programmable start up & shut down, Night-Smart™ System reduces blower speed when sash is closed - Leak-tight stainless steel interior & powder-coated steel exterior - Removable towel catch located under work surface - Built-in timer and digital clock with code-activated electronic security lock - ADA-Compliant touchpad control on right side post - Removable, seamless type 304 stainless steel, dished work surface with lift out knobs - Nominal inflow velocity of 105 fpm (0.5 m/sec) and nominal downflow velocity of 55 fpm (0.3 m/sec) with approximately 70% air recirculation The Labconco 332691101 6' Purifier Cell Logic+ Class II Type A2 Biosafety Cabinet with Scope-Ready, Service Fixtures, Vacu-Pass Portal, and Base Stand, 115V, 60Hz provides personnel, product and environmental protection from hazardous particulates such as agents that require Biosafety Level 1, 2 or 3 containment. These biological safety cabinets are designed to discharge HEPA-filtered exhaust air directly into the laboratory, or into an exhaust system through the optional Canopy Connection. When canopy-connected, the biosafety cabinets may be used for applications involving minute quantities of volatile toxic chemicals and tracer amounts of radionuclides as an adjunct to microbiological research. Other appropriate applications include work with antineoplastic drugs, genetic material, asbestos and additional substances that generate hazardous airborne particulates. All models are NSF compliant. During operation, room air is drawn into the inlet grill. The air in the plenum beneath the work surface is a mixture of unfiltered room air and air that has just passed through the work area. This contaminated air is drawn by the blower through the back plenum of the cabinet, where approximately 70% of the air is recirculated through the supply HEPA filter and back over the work area. The balance of the contaminated air is discharged to the environment after passing through the exhaust HEPA filter. INCLUDED: The Labconco 332691101 6' Purifier Cell Logic+ Class II Type A2 Biosafety Cabinet with Scope-Ready, Service Fixtures, Vacu-Pass Portal, and Base Stand, 115V, 60Hz includes: - Drain Valve Assembly and Fasteners - Vacu-Pass Accessory Plug - Power Cord - Operator's Guide - Manufacturer's Documentation - 5 Year Manufacturer's Warranty

Labconco 332491101 4' Purifier Cell Logic+ Class II Type A2 Biosafety Cabinet with Scope-Ready, Serv (more)ice Fixture, Vacu-Pass Portal, and Base Stand, 115V, 60HzFeatures - Electronically Commutated Motor (ECM) & Constant Airflow Profile (CAP) airflow monitoring system - Intrinsically-safe negative pressure design - Air-Wave™ Entry System & Contain-Air™ Negative Pressure Channel - Supply and exhaust 99.99% efficient HEPA filters. 99.999% efficient ULPA filters available - Interior-mounted, line-of-sight color LCD with MyLogic OS. Displays filter life, status messages for alarm conditions and alerts. 8 languages available - Glare-free LED lighting located outside the contaminated work area - Fully-closing, clear 1/4" tempered safety glass sash - Curved stainless steel inlet grille with Reserve-Air Secondary Airflow Slots - Smart-Start™ System user-programmable start up & shut down, Night-Smart™ System reduces blower speed when sash is closed - Leak-tight stainless steel interior & powder-coated steel exterior - Removable towel catch located under work surface - Built-in timer and digital clock with code-activated electronic security lock - ADA-Compliant touchpad control on right side post - Removable, seamless type 304 stainless steel, dished work surface with lift out knobs - Nominal inflow velocity of 105 fpm (0.5 m/sec) and nominal downflow velocity of 55 fpm (0.3 m/sec) with approximately 70% air recirculation The Labconco 332491101 4' Purifier Cell Logic+ Class II Type A2 Biosafety Cabinet with Scope-Ready, Service Fixture, Vacu-Pass Portal, and Base Stand, 115V, 60Hz provides personnel, product and environmental protection from hazardous particulates such as agents that require Biosafety Level 1, 2 or 3 containment. These biological safety cabinets are designed to discharge HEPA-filtered exhaust air directly into the laboratory, or into an exhaust system through the optional Canopy Connection. When canopy-connected, the biosafety cabinets may be used for applications involving minute quantities of volatile toxic chemicals and tracer amounts of radionuclides as an adjunct to microbiological research. Other appropriate applications include work with antineoplastic drugs, genetic material, asbestos and additional substances that generate hazardous airborne particulates. All models are NSF compliant. During operation, room air is drawn into the inlet grill. The air in the plenum beneath the work surface is a mixture of unfiltered room air and air that has just passed through the work area. This contaminated air is drawn by the blower through the back plenum of the cabinet, where approximately 70% of the air is recirculated through the supply HEPA filter and back over the work area. The balance of the contaminated air is discharged to the environment after passing through the exhaust HEPA filter. INCLUDED: The Labconco 332491101 4' Purifier Cell Logic+ Class II Type A2 Biosafety Cabinet with Scope-Ready, Service Fixture, Vacu-Pass Portal, and Base Stand, 115V, 60Hz includes: - Drain Valve Assembly and Fasteners - Vacu-Pass Accessory Plug - Power Cord - Operator's Guide - Manufacturer's Documentation - 5 Year Manufacturer's Warranty

Labconco 332491001 4' Purifier Cell Logic+ Class II Type A2 Biosafety Cabinet with Scope-Ready, Serv (more)ice Fixture, and Vacu-Pass Portal, 115V, 60HzFeatures - Electronically Commutated Motor (ECM) & Constant Airflow Profile (CAP) airflow monitoring system - Intrinsically-safe negative pressure design - Air-Wave™ Entry System & Contain-Air™ Negative Pressure Channel - Supply and exhaust 99.99% efficient HEPA filters. 99.999% efficient ULPA filters available - Interior-mounted, line-of-sight color LCD with MyLogic OS. Displays filter life, status messages for alarm conditions and alerts. 8 languages available - Glare-free LED lighting located outside the contaminated work area - Fully-closing, clear 1/4" tempered safety glass sash - Curved stainless steel inlet grille with Reserve-Air Secondary Airflow Slots - Smart-Start™ System user-programmable start up & shut down, Night-Smart™ System reduces blower speed when sash is closed - Leak-tight stainless steel interior & powder-coated steel exterior - Removable towel catch located under work surface - Built-in timer and digital clock with code-activated electronic security lock - ADA-Compliant touchpad control on right side post - Removable, seamless type 304 stainless steel, dished work surface with lift out knobs - Nominal inflow velocity of 105 fpm (0.5 m/sec) and nominal downflow velocity of 55 fpm (0.3 m/sec) with approximately 70% air recirculation The Labconco 332491001 4' Purifier Cell Logic+ Class II Type A2 Biosafety Cabinet with Scope-Ready, Service Fixture, and Vacu-Pass Portal, 115V, 60Hz provides personnel, product and environmental protection from hazardous particulates such as agents that require Biosafety Level 1, 2 or 3 containment. These biological safety cabinets are designed to discharge HEPA-filtered exhaust air directly into the laboratory, or into an exhaust system through the optional Canopy Connection. When canopy-connected, the biosafety cabinets may be used for applications involving minute quantities of volatile toxic chemicals and tracer amounts of radionuclides as an adjunct to microbiological research. Other appropriate applications include work with antineoplastic drugs, genetic material, asbestos and additional substances that generate hazardous airborne particulates. All models are NSF compliant. During operation, room air is drawn into the inlet grill. The air in the plenum beneath the work surface is a mixture of unfiltered room air and air that has just passed through the work area. This contaminated air is drawn by the blower through the back plenum of the cabinet, where approximately 70% of the air is recirculated through the supply HEPA filter and back over the work area. The balance of the contaminated air is discharged to the environment after passing through the exhaust HEPA filter. INCLUDED: The Labconco 332491001 4' Purifier Cell Logic+ Class II Type A2 Biosafety Cabinet with Scope-Ready, Service Fixture, and Vacu-Pass Portal, 115V, 60Hz includes: - Drain Valve Assembly and Fasteners - Vacu-Pass Accessory Plug - Power Cord - Operator's Guide - Manufacturer's Documentation - 5 Year Manufacturer's Warranty

Labconco 322691101 6' Purifier Cell Logic+ Class II Type A2 Biosafety Cabinet with Temp-Zone, UV Lig (more)ht, Service Fixtures, Vacu-Pass Portal, and Base Stand, 115V, 60HzFeatures - Electronically Commutated Motor (ECM) & Constant Airflow Profile (CAP) airflow monitoring system - Intrinsically-safe negative pressure design - Air-Wave™ Entry System & Contain-Air™ Negative Pressure Channel - Supply and exhaust 99.99% efficient HEPA filters. 99.999% efficient ULPA filters available - Interior-mounted, line-of-sight color LCD with MyLogic OS. Displays filter life, status messages for alarm conditions and alerts. 8 languages available - Glare-free LED lighting located outside the contaminated work area - Fully-closing, clear 1/4" tempered safety glass sash - Curved stainless steel inlet grille with Reserve-Air Secondary Airflow Slots - Smart-Start™ System user-programmable start up & shut down, Night-Smart™ System reduces blower speed when sash is closed - Leak-tight stainless steel interior & powder-coated steel exterior - Removable towel catch located under work surface - Built-in timer and digital clock with code-activated electronic security lock - ADA-Compliant touchpad control on right side post - Removable, seamless type 304 stainless steel, dished work surface with lift out knobs - Nominal inflow velocity of 105 fpm (0.5 m/sec) and nominal downflow velocity of 55 fpm (0.3 m/sec) with approximately 70% air recirculation The Labconco 322691101 6' Purifier Cell Logic+ Class II Type A2 Biosafety Cabinet with Temp-Zone, UV Light, Service Fixtures, Vacu-Pass Portal, and Base Stand, 115V, 60Hz provides personnel, product and environmental protection from hazardous particulates such as agents that require Biosafety Level 1, 2 or 3 containment. These biological safety cabinets are designed to discharge HEPA-filtered exhaust air directly into the laboratory, or into an exhaust system through the optional Canopy Connection. When canopy-connected, the biosafety cabinets may be used for applications involving minute quantities of volatile toxic chemicals and tracer amounts of radionuclides as an adjunct to microbiological research. Other appropriate applications include work with antineoplastic drugs, genetic material, asbestos and additional substances that generate hazardous airborne particulates. All models are NSF compliant. During operation, room air is drawn into the inlet grill. The air in the plenum beneath the work surface is a mixture of unfiltered room air and air that has just passed through the work area. This contaminated air is drawn by the blower through the back plenum of the cabinet, where approximately 70% of the air is recirculated through the supply HEPA filter and back over the work area. The balance of the contaminated air is discharged to the environment after passing through the exhaust HEPA filter. INCLUDED: The Labconco 322691101 6' Purifier Cell Logic+ Class II Type A2 Biosafety Cabinet with Temp-Zone, UV Light, Service Fixtures, Vacu-Pass Portal, and Base Stand, 115V, 60Hz includes: - Drain Valve Assembly and Fasteners - Vacu-Pass Accessory Plug - Power Cord - Operator's Guide - Manufacturer's Documentation - 5 Year Manufacturer's Warranty

Labconco 322491101 4' Purifier Cell Logic+ Class II Type A2 Biosafety Cabinet with Temp-Zone, UV Lig (more)ht, Service Fixture, Vacu-Pass Portal, and Base Stand, 115V, 60HzFeatures - Electronically Commutated Motor (ECM) & Constant Airflow Profile (CAP) airflow monitoring system - Intrinsically-safe negative pressure design - Air-Wave™ Entry System & Contain-Air™ Negative Pressure Channel - Supply and exhaust 99.99% efficient HEPA filters. 99.999% efficient ULPA filters available - Interior-mounted, line-of-sight color LCD with MyLogic OS. Displays filter life, status messages for alarm conditions and alerts. 8 languages available - Glare-free LED lighting located outside the contaminated work area - Fully-closing, clear 1/4" tempered safety glass sash - Curved stainless steel inlet grille with Reserve-Air Secondary Airflow Slots - Smart-Start™ System user-programmable start up & shut down, Night-Smart™ System reduces blower speed when sash is closed - Leak-tight stainless steel interior & powder-coated steel exterior - Removable towel catch located under work surface - Built-in timer and digital clock with code-activated electronic security lock - ADA-Compliant touchpad control on right side post - Removable, seamless type 304 stainless steel, dished work surface with lift out knobs - Nominal inflow velocity of 105 fpm (0.5 m/sec) and nominal downflow velocity of 55 fpm (0.3 m/sec) with approximately 70% air recirculation The Labconco 322491101 4' Purifier Cell Logic+ Class II Type A2 Biosafety Cabinet with Temp-Zone, UV Light, Service Fixture, Vacu-Pass Portal, and Base Stand, 115V, 60Hz provides personnel, product and environmental protection from hazardous particulates such as agents that require Biosafety Level 1, 2 or 3 containment. These biological safety cabinets are designed to discharge HEPA-filtered exhaust air directly into the laboratory, or into an exhaust system through the optional Canopy Connection. When canopy-connected, the biosafety cabinets may be used for applications involving minute quantities of volatile toxic chemicals and tracer amounts of radionuclides as an adjunct to microbiological research. Other appropriate applications include work with antineoplastic drugs, genetic material, asbestos and additional substances that generate hazardous airborne particulates. All models are NSF compliant. During operation, room air is drawn into the inlet grill. The air in the plenum beneath the work surface is a mixture of unfiltered room air and air that has just passed through the work area. This contaminated air is drawn by the blower through the back plenum of the cabinet, where approximately 70% of the air is recirculated through the supply HEPA filter and back over the work area. The balance of the contaminated air is discharged to the environment after passing through the exhaust HEPA filter. INCLUDED: The Labconco 322491101 4' Purifier Cell Logic+ Class II Type A2 Biosafety Cabinet with Temp-Zone, UV Light, Service Fixture, Vacu-Pass Portal, and Base Stand, 115V, 60Hz includes: - Drain Valve Assembly and Fasteners - Vacu-Pass Accessory Plug - Power Cord - Operator's Guide - Manufacturer's Documentation - 5 Year Manufacturer's Warranty

Labconco 322491001 4' Purifier Cell Logic+ Class II Type A2 Biosafety Cabinet with Temp-Zone, UV Lig (more)ht, Service Fixture, and Vacu-Pass Portal, 115V, 60HzFeatures - Electronically Commutated Motor (ECM) & Constant Airflow Profile (CAP) airflow monitoring system - Intrinsically-safe negative pressure design - Air-Wave™ Entry System & Contain-Air™ Negative Pressure Channel - Supply and exhaust 99.99% efficient HEPA filters. 99.999% efficient ULPA filters available - Interior-mounted, line-of-sight color LCD with MyLogic OS. Displays filter life, status messages for alarm conditions and alerts. 8 languages available - Glare-free LED lighting located outside the contaminated work area - Fully-closing, clear 1/4" tempered safety glass sash - Curved stainless steel inlet grille with Reserve-Air Secondary Airflow Slots - Smart-Start™ System user-programmable start up & shut down, Night-Smart™ System reduces blower speed when sash is closed - Leak-tight stainless steel interior & powder-coated steel exterior - Removable towel catch located under work surface - Built-in timer and digital clock with code-activated electronic security lock - ADA-Compliant touchpad control on right side post - Removable, seamless type 304 stainless steel, dished work surface with lift out knobs - Nominal inflow velocity of 105 fpm (0.5 m/sec) and nominal downflow velocity of 55 fpm (0.3 m/sec) with approximately 70% air recirculation The Labconco 322491001 4' Purifier Cell Logic+ Class II Type A2 Biosafety Cabinet with Temp-Zone, UV Light, Service Fixture, and Vacu-Pass Portal, 115V, 60Hz provides personnel, product and environmental protection from hazardous particulates such as agents that require Biosafety Level 1, 2 or 3 containment. These biological safety cabinets are designed to discharge HEPA-filtered exhaust air directly into the laboratory, or into an exhaust system through the optional Canopy Connection. When canopy-connected, the biosafety cabinets may be used for applications involving minute quantities of volatile toxic chemicals and tracer amounts of radionuclides as an adjunct to microbiological research. Other appropriate applications include work with antineoplastic drugs, genetic material, asbestos and additional substances that generate hazardous airborne particulates. All models are NSF compliant. During operation, room air is drawn into the inlet grill. The air in the plenum beneath the work surface is a mixture of unfiltered room air and air that has just passed through the work area. This contaminated air is drawn by the blower through the back plenum of the cabinet, where approximately 70% of the air is recirculated through the supply HEPA filter and back over the work area. The balance of the contaminated air is discharged to the environment after passing through the exhaust HEPA filter. INCLUDED: The Labconco 322491001 4' Purifier Cell Logic+ Class II Type A2 Biosafety Cabinet with Temp-Zone, UV Light, Service Fixture, and Vacu-Pass Portal, 115V, 60Hz includes: - Drain Valve Assembly and Fasteners - Vacu-Pass Accessory Plug - Power Cord - Operator's Guide - Manufacturer's Documentation - 5 Year Manufacturer's Warranty

Labconco 302481001 4' Purifier Logic+ Class II Type A2 Biosafety Cabinet with 8" Sash Opening, Servi (more)ce Fixture, UV Light, and Vacu-Pass Portal, 115V, 60HzFeatures - Electronically Commutated Motor (ECM) & Constant Airflow Profile (CAP) airflow monitoring system - Intrinsically-safe negative pressure design - Air-Wave™ Entry System & Contain-Air™ Negative Pressure Channel - Supply and exhaust 99.99% efficient HEPA filters. 99.999% efficient ULPA filters available - Interior-mounted, line-of-sight color LCD with MyLogic OS. Displays filter life, status messages for alarm conditions and alerts. 8 languages available - Glare-free LED lighting located outside the contaminated work area - Fully-closing, clear 1/4" tempered safety glass sash - Curved stainless steel inlet grille with Reserve-Air Secondary Airflow Slots - Smart-Start™ System user-programmable start up & shut down, Night-Smart™ System reduces blower speed when sash is closed - Leak-tight stainless steel interior & powder-coated steel exterior - Removable towel catch located under work surface - Built-in timer and digital clock with code-activated electronic security lock - ADA-Compliant touchpad control on right side post - Removable, seamless type 304 stainless steel, dished work surface with lift out knobs - Nominal inflow velocity of 105 fpm (0.5 m/sec) and nominal downflow velocity of 55 fpm (0.3 m/sec) with approximately 70% air recirculation The Labconco 302481001 4' Purifier Logic+ Class II Type A2 Biosafety Cabinet with 8" Sash Opening, Service Fixture, UV Light, and Vacu-Pass Portal, 115V, 60Hz provides personnel, product and environmental protection from hazardous particulates such as agents that require Biosafety Level 1, 2, or 3 containment. These biological safety cabinets are designed to discharge HEPA-filtered exhaust air directly into the laboratory, or into an exhaust system through the optional Canopy Connection. When canopy-connected, the biosafety cabinets may be used for applications involving minute quantities of volatile toxic chemicals and tracer amounts of radionuclides as an adjunct to microbiological research. Other appropriate applications include work with antineoplastic drugs, genetic material, asbestos and additional substances that generate hazardous airborne particulates. All models are NSF-listed. During operation, room air is drawn into the inlet grill. The air in the plenum beneath the work surface is a mixture of unfiltered room air and air that has just passed through the work area. This contaminated air is drawn by the blower through the back plenum of the cabinet, where approximately 70% of the air is recirculated through the supply HEPA filter and back over the work area. The balance of the contaminated air is discharged to the environment after passing through the exhaust HEPA filter. INCLUDED: The Labconco 302481001 4' Purifier Logic+ Class II Type A2 Biosafety Cabinet with 8" Sash Opening, Service Fixture, UV Light, and Vacu-Pass Portal, 115V, 60Hz includes: - Drain Valve Assembly and Fasteners - Vacu-Pass Accessory Plug - Power Cord - Operator's Guide - Manufacturer's Documentation - 5 Year Manufacturer's Warranty

Labconco 302480101 4' Purifier Logic+ Class II Type A2 Biosafety Cabinet with 8" Sash Opening and Ba (more)se Stand, 115V, 60HzFeatures - Electronically Commutated Motor (ECM) & Constant Airflow Profile (CAP) airflow monitoring system - Intrinsically-safe negative pressure design - Air-Wave™ Entry System & Contain-Air™ Negative Pressure Channel - Supply and exhaust 99.99% efficient HEPA filters. 99.999% efficient ULPA filters available - Interior-mounted, line-of-sight color LCD with MyLogic OS. Displays filter life, status messages for alarm conditions and alerts. 8 languages available - Glare-free LED lighting located outside the contaminated work area - Fully-closing, clear 1/4" tempered safety glass sash - Curved stainless steel inlet grille with Reserve-Air Secondary Airflow Slots - Smart-Start™ System user-programmable start up & shut down, Night-Smart™ System reduces blower speed when sash is closed - Leak-tight stainless steel interior & powder-coated steel exterior - Removable towel catch located under work surface - Built-in timer and digital clock with code-activated electronic security lock - ADA-Compliant touchpad control on right side post - Removable, seamless type 304 stainless steel, dished work surface with lift out knobs - Nominal inflow velocity of 105 fpm (0.5 m/sec) and nominal downflow velocity of 55 fpm (0.3 m/sec) with approximately 70% air recirculation The Labconco 302480101 4' Purifier Logic+ Class II Type A2 Biosafety Cabinet with 8" Sash Opening and Base Stand, 115V, 60Hz provides personnel, product and environmental protection from hazardous particulates such as agents that require Biosafety Level 1, 2, or 3 containment. These biological safety cabinets are designed to discharge HEPA-filtered exhaust air directly into the laboratory, or into an exhaust system through the optional Canopy Connection. When canopy-connected, the biosafety cabinets may be used for applications involving minute quantities of volatile toxic chemicals and tracer amounts of radionuclides as an adjunct to microbiological research. Other appropriate applications include work with antineoplastic drugs, genetic material, asbestos and additional substances that generate hazardous airborne particulates. All models are NSF-listed. During operation, room air is drawn into the inlet grill. The air in the plenum beneath the work surface is a mixture of unfiltered room air and air that has just passed through the work area. This contaminated air is drawn by the blower through the back plenum of the cabinet, where approximately 70% of the air is recirculated through the supply HEPA filter and back over the work area. The balance of the contaminated air is discharged to the environment after passing through the exhaust HEPA filter. INCLUDED: The Labconco 302480101 4' Purifier Logic+ Class II Type A2 Biosafety Cabinet with 8" Sash Opening and Base Stand, 115V, 60Hz includes: - Drain Valve Assembly and Fasteners - Power Cord - Operator's Guide - Manufacturer's Documentation - 5 Year Manufacturer's Warranty

Labconco 302421101 4' Purifier Logic+ Class II Type A2 Biosafety Cabinet with 12" Sash Opening, Serv (more)ice Fixture, UV Light, Vacu-Pass Portal, and Base Stand, 115V, 60HzFeatures - Electronically Commutated Motor (ECM) & Constant Airflow Profile (CAP) airflow monitoring system - Intrinsically-safe negative pressure design - Air-Wave™ Entry System & Contain-Air™ Negative Pressure Channel - Supply and exhaust 99.99% efficient HEPA filters. 99.999% efficient ULPA filters available - Interior-mounted, line-of-sight color LCD with MyLogic OS. Displays filter life, status messages for alarm conditions and alerts. 8 languages available - Glare-free LED lighting located outside the contaminated work area - Fully-closing, clear 1/4" tempered safety glass sash - Curved stainless steel inlet grille with Reserve-Air Secondary Airflow Slots - Smart-Start™ System user-programmable start up & shut down, Night-Smart™ System reduces blower speed when sash is closed - Leak-tight stainless steel interior & powder-coated steel exterior - Removable towel catch located under work surface - Built-in timer and digital clock with code-activated electronic security lock - ADA-Compliant touchpad control on right side post - Removable, seamless type 304 stainless steel, dished work surface with lift out knobs - Nominal inflow velocity of 105 fpm (0.5 m/sec) and nominal downflow velocity of 55 fpm (0.3 m/sec) with approximately 70% air recirculation The Labconco 302421101 4' Purifier Logic+ Class II Type A2 Biosafety Cabinet with 12" Sash Opening, Service Fixture, UV Light, Vacu-Pass Portal, and Base Stand, 115V, 60Hz provides personnel, product and environmental protection from hazardous particulates such as agents that require Biosafety Level 1, 2, or 3 containment. These biological safety cabinets are designed to discharge HEPA-filtered exhaust air directly into the laboratory, or into an exhaust system through the optional Canopy Connection. When canopy-connected, the biosafety cabinets may be used for applications involving minute quantities of volatile toxic chemicals and tracer amounts of radionuclides as an adjunct to microbiological research. Other appropriate applications include work with antineoplastic drugs, genetic material, asbestos and additional substances that generate hazardous airborne particulates. All models are NSF-listed. During operation, room air is drawn into the inlet grill. The air in the plenum beneath the work surface is a mixture of unfiltered room air and air that has just passed through the work area. This contaminated air is drawn by the blower through the back plenum of the cabinet, where approximately 70% of the air is recirculated through the supply HEPA filter and back over the work area. The balance of the contaminated air is discharged to the environment after passing through the exhaust HEPA filter. INCLUDED: The Labconco 302421101 4' Purifier Logic+ Class II Type A2 Biosafety Cabinet with 12" Sash Opening, Service Fixture, UV Light, Vacu-Pass Portal, and Base Stand, 115V, 60Hz includes: - Drain Valve Assembly and Fasteners - Vacu-Pass Accessory Plug - Power Cord - Operator's Guide - Manufacturer's Documentation - 5 Year Manufacturer's Warranty

Labconco 302421001 4' Purifier Logic+ Class II Type A2 Biosafety Cabinet with 12" Sash Opening, Serv (more)ice Fixture, UV Light, and Vacu-Pass Portal, 115V, 60HzFeatures - Electronically Commutated Motor (ECM) & Constant Airflow Profile (CAP) airflow monitoring system - Intrinsically-safe negative pressure design - Air-Wave™ Entry System & Contain-Air™ Negative Pressure Channel - Supply and exhaust 99.99% efficient HEPA filters. 99.999% efficient ULPA filters available - Interior-mounted, line-of-sight color LCD with MyLogic OS. Displays filter life, status messages for alarm conditions and alerts. 8 languages available - Glare-free LED lighting located outside the contaminated work area - Fully-closing, clear 1/4" tempered safety glass sash - Curved stainless steel inlet grille with Reserve-Air Secondary Airflow Slots - Smart-Start™ System user-programmable start up & shut down, Night-Smart™ System reduces blower speed when sash is closed - Leak-tight stainless steel interior & powder-coated steel exterior - Removable towel catch located under work surface - Built-in timer and digital clock with code-activated electronic security lock - ADA-Compliant touchpad control on right side post - Removable, seamless type 304 stainless steel, dished work surface with lift out knobs - Nominal inflow velocity of 105 fpm (0.5 m/sec) and nominal downflow velocity of 55 fpm (0.3 m/sec) with approximately 70% air recirculation The Labconco 302421001 4' Purifier Logic+ Class II Type A2 Biosafety Cabinet with 12" Sash Opening, Service Fixture, UV Light, and Vacu-Pass Portal, 115V, 60Hz provides personnel, product and environmental protection from hazardous particulates such as agents that require Biosafety Level 1, 2, or 3 containment. These biological safety cabinets are designed to discharge HEPA-filtered exhaust air directly into the laboratory, or into an exhaust system through the optional Canopy Connection. When canopy-connected, the biosafety cabinets may be used for applications involving minute quantities of volatile toxic chemicals and tracer amounts of radionuclides as an adjunct to microbiological research. Other appropriate applications include work with antineoplastic drugs, genetic material, asbestos and additional substances that generate hazardous airborne particulates. All models are NSF-listed. During operation, room air is drawn into the inlet grill. The air in the plenum beneath the work surface is a mixture of unfiltered room air and air that has just passed through the work area. This contaminated air is drawn by the blower through the back plenum of the cabinet, where approximately 70% of the air is recirculated through the supply HEPA filter and back over the work area. The balance of the contaminated air is discharged to the environment after passing through the exhaust HEPA filter. INCLUDED: The Labconco 302421001 4' Purifier Logic+ Class II Type A2 Biosafety Cabinet with 12" Sash Opening, Service Fixture, UV Light, and Vacu-Pass Portal, 115V, 60Hz includes: - Drain Valve Assembly and Fasteners - Vacu-Pass Accessory Plug - Power Cord - Operator's Guide - Manufacturer's Documentation - 5 Year Manufacturer's Warranty

Labconco 302420101 4' Purifier Logic+ Class II Type A2 Biosafety Cabinet with 12" Sash Opening and B (more)ase Stand, 115V, 60HzFeatures - Electronically Commutated Motor (ECM) & Constant Airflow Profile (CAP) airflow monitoring system - Intrinsically-safe negative pressure design - Air-Wave™ Entry System & Contain-Air™ Negative Pressure Channel - Supply and exhaust 99.99% efficient HEPA filters. 99.999% efficient ULPA filters available - Interior-mounted, line-of-sight color LCD with MyLogic OS. Displays filter life, status messages for alarm conditions and alerts. 8 languages available - Glare-free LED lighting located outside the contaminated work area - Fully-closing, clear 1/4" tempered safety glass sash - Curved stainless steel inlet grille with Reserve-Air Secondary Airflow Slots - Smart-Start™ System user-programmable start up & shut down, Night-Smart™ System reduces blower speed when sash is closed - Leak-tight stainless steel interior & powder-coated steel exterior - Removable towel catch located under work surface - Built-in timer and digital clock with code-activated electronic security lock - ADA-Compliant touchpad control on right side post - Removable, seamless type 304 stainless steel, dished work surface with lift out knobs - Nominal inflow velocity of 105 fpm (0.5 m/sec) and nominal downflow velocity of 55 fpm (0.3 m/sec) with approximately 70% air recirculation The Labconco 302420101 4' Purifier Logic+ Class II Type A2 Biosafety Cabinet with 12" Sash Opening and Base Stand, 115V, 60Hz provides personnel, product and environmental protection from hazardous particulates such as agents that require Biosafety Level 1, 2, or 3 containment. These biological safety cabinets are designed to discharge HEPA-filtered exhaust air directly into the laboratory, or into an exhaust system through the optional Canopy Connection. When canopy-connected, the biosafety cabinets may be used for applications involving minute quantities of volatile toxic chemicals and tracer amounts of radionuclides as an adjunct to microbiological research. Other appropriate applications include work with antineoplastic drugs, genetic material, asbestos and additional substances that generate hazardous airborne particulates. All models are NSF-listed. During operation, room air is drawn into the inlet grill. The air in the plenum beneath the work surface is a mixture of unfiltered room air and air that has just passed through the work area. This contaminated air is drawn by the blower through the back plenum of the cabinet, where approximately 70% of the air is recirculated through the supply HEPA filter and back over the work area. The balance of the contaminated air is discharged to the environment after passing through the exhaust HEPA filter. INCLUDED: The Labconco 302420101 4' Purifier Logic+ Class II Type A2 Biosafety Cabinet with 12" Sash Opening and Base Stand, 115V, 60Hz includes: - Drain Valve Assembly and Fasteners - Power Cord - Operator's Guide - Manufacturer's Documentation - 5 Year Manufacturer's Warranty

Labconco 302411101 4' Purifier Logic+ Class II Type A2 Biosafety Cabinet with 10" Sash Opening, Serv (more)ice Fixture, UV Light, Vacu-Pass Portal, and Base Stand, 115V, 60HzFeatures - Electronically Commutated Motor (ECM) & Constant Airflow Profile (CAP) airflow monitoring system - Intrinsically-safe negative pressure design - Air-Wave™ Entry System & Contain-Air™ Negative Pressure Channel - Supply and exhaust 99.99% efficient HEPA filters. 99.999% efficient ULPA filters available - Interior-mounted, line-of-sight color LCD with MyLogic OS. Displays filter life, status messages for alarm conditions and alerts. 8 languages available - Glare-free LED lighting located outside the contaminated work area - Fully-closing, clear 1/4" tempered safety glass sash - Curved stainless steel inlet grille with Reserve-Air Secondary Airflow Slots - Smart-Start™ System user-programmable start up & shut down, Night-Smart™ System reduces blower speed when sash is closed - Leak-tight stainless steel interior & powder-coated steel exterior - Removable towel catch located under work surface - Built-in timer and digital clock with code-activated electronic security lock - ADA-Compliant touchpad control on right side post - Removable, seamless type 304 stainless steel, dished work surface with lift out knobs - Nominal inflow velocity of 105 fpm (0.5 m/sec) and nominal downflow velocity of 55 fpm (0.3 m/sec) with approximately 70% air recirculation The Labconco 302411101 4' Purifier Logic+ Class II Type A2 Biosafety Cabinet with 10" Sash Opening, Service Fixture, UV Light, Vacu-Pass Portal, and Base Stand, 115V, 60Hz provides personnel, product and environmental protection from hazardous particulates such as agents that require Biosafety Level 1, 2, or 3 containment. These biological safety cabinets are designed to discharge HEPA-filtered exhaust air directly into the laboratory, or into an exhaust system through the optional Canopy Connection. When canopy-connected, the biosafety cabinets may be used for applications involving minute quantities of volatile toxic chemicals and tracer amounts of radionuclides as an adjunct to microbiological research. Other appropriate applications include work with antineoplastic drugs, genetic material, asbestos and additional substances that generate hazardous airborne particulates. All models are NSF-listed. During operation, room air is drawn into the inlet grill. The air in the plenum beneath the work surface is a mixture of unfiltered room air and air that has just passed through the work area. This contaminated air is drawn by the blower through the back plenum of the cabinet, where approximately 70% of the air is recirculated through the supply HEPA filter and back over the work area. The balance of the contaminated air is discharged to the environment after passing through the exhaust HEPA filter. INCLUDED: The Labconco 302411101 4' Purifier Logic+ Class II Type A2 Biosafety Cabinet with 10" Sash Opening, Service Fixture, UV Light, Vacu-Pass Portal, and Base Stand, 115V, 60Hz includes: - Drain Valve Assembly and Fasteners - Vacu-Pass Accessory Plug - Power Cord - Operator's Guide - Manufacturer's Documentation - 5 Year Manufacturer's Warranty

Labconco 302411001 4' Purifier Logic+ Class II Type A2 Biosafety Cabinet with 10" Sash Opening, Serv (more)ice Fixture, UV Light, and Vacu-Pass Portal, 115V, 60HzFeatures - Electronically Commutated Motor (ECM) & Constant Airflow Profile (CAP) airflow monitoring system - Intrinsically-safe negative pressure design - Air-Wave™ Entry System & Contain-Air™ Negative Pressure Channel - Supply and exhaust 99.99% efficient HEPA filters. 99.999% efficient ULPA filters available - Interior-mounted, line-of-sight color LCD with MyLogic OS. Displays filter life, status messages for alarm conditions and alerts. 8 languages available - Glare-free LED lighting located outside the contaminated work area - Fully-closing, clear 1/4" tempered safety glass sash - Curved stainless steel inlet grille with Reserve-Air Secondary Airflow Slots - Smart-Start™ System user-programmable start up & shut down, Night-Smart™ System reduces blower speed when sash is closed - Leak-tight stainless steel interior & powder-coated steel exterior - Removable towel catch located under work surface - Built-in timer and digital clock with code-activated electronic security lock - ADA-Compliant touchpad control on right side post - Removable, seamless type 304 stainless steel, dished work surface with lift out knobs - Nominal inflow velocity of 105 fpm (0.5 m/sec) and nominal downflow velocity of 55 fpm (0.3 m/sec) with approximately 70% air recirculation The Labconco 302411001 4' Purifier Logic+ Class II Type A2 Biosafety Cabinet with 10" Sash Opening, Service Fixture, UV Light, and Vacu-Pass Portal, 115V, 60Hz provides personnel, product and environmental protection from hazardous particulates such as agents that require Biosafety Level 1, 2, or 3 containment. These biological safety cabinets are designed to discharge HEPA-filtered exhaust air directly into the laboratory, or into an exhaust system through the optional Canopy Connection. When canopy-connected, the biosafety cabinets may be used for applications involving minute quantities of volatile toxic chemicals and tracer amounts of radionuclides as an adjunct to microbiological research. Other appropriate applications include work with antineoplastic drugs, genetic material, asbestos and additional substances that generate hazardous airborne particulates. All models are NSF-listed. During operation, room air is drawn into the inlet grill. The air in the plenum beneath the work surface is a mixture of unfiltered room air and air that has just passed through the work area. This contaminated air is drawn by the blower through the back plenum of the cabinet, where approximately 70% of the air is recirculated through the supply HEPA filter and back over the work area. The balance of the contaminated air is discharged to the environment after passing through the exhaust HEPA filter. INCLUDED: The Labconco 302411001 4' Purifier Logic+ Class II Type A2 Biosafety Cabinet with 10" Sash Opening, Service Fixture, UV Light, and Vacu-Pass Portal, 115V, 60Hz includes: - Drain Valve Assembly and Fasteners - Vacu-Pass Accessory Plug - Power Cord - Operator's Guide - Manufacturer's Documentation - 5 Year Manufacturer's Warranty

Labconco 302410101 4' Purifier Logic+ Class II Type A2 Biosafety Cabinet with 10" Sash Opening and B (more)ase Stand, 115V, 60HzFeatures - Electronically Commutated Motor (ECM) & Constant Airflow Profile (CAP) airflow monitoring system - Intrinsically-safe negative pressure design - Air-Wave™ Entry System & Contain-Air™ Negative Pressure Channel - Supply and exhaust 99.99% efficient HEPA filters. 99.999% efficient ULPA filters available - Interior-mounted, line-of-sight color LCD with MyLogic OS. Displays filter life, status messages for alarm conditions and alerts. 8 languages available - Glare-free LED lighting located outside the contaminated work area - Fully-closing, clear 1/4" tempered safety glass sash - Curved stainless steel inlet grille with Reserve-Air Secondary Airflow Slots - Smart-Start™ System user-programmable start up & shut down, Night-Smart™ System reduces blower speed when sash is closed - Leak-tight stainless steel interior & powder-coated steel exterior - Removable towel catch located under work surface - Built-in timer and digital clock with code-activated electronic security lock - ADA-Compliant touchpad control on right side post - Removable, seamless type 304 stainless steel, dished work surface with lift out knobs - Nominal inflow velocity of 105 fpm (0.5 m/sec) and nominal downflow velocity of 55 fpm (0.3 m/sec) with approximately 70% air recirculation The Labconco 302410101 4' Purifier Logic+ Class II Type A2 Biosafety Cabinet with 10" Sash Opening and Base Stand, 115V, 60Hz provides personnel, product and environmental protection from hazardous particulates such as agents that require Biosafety Level 1, 2, or 3 containment. These biological safety cabinets are designed to discharge HEPA-filtered exhaust air directly into the laboratory, or into an exhaust system through the optional Canopy Connection. When canopy-connected, the biosafety cabinets may be used for applications involving minute quantities of volatile toxic chemicals and tracer amounts of radionuclides as an adjunct to microbiological research. Other appropriate applications include work with antineoplastic drugs, genetic material, asbestos and additional substances that generate hazardous airborne particulates. All models are NSF-listed. During operation, room air is drawn into the inlet grill. The air in the plenum beneath the work surface is a mixture of unfiltered room air and air that has just passed through the work area. This contaminated air is drawn by the blower through the back plenum of the cabinet, where approximately 70% of the air is recirculated through the supply HEPA filter and back over the work area. The balance of the contaminated air is discharged to the environment after passing through the exhaust HEPA filter. INCLUDED: The Labconco 302410101 4' Purifier Logic+ Class II Type A2 Biosafety Cabinet with 10" Sash Opening and Base Stand, 115V, 60Hz includes: - Drain Valve Assembly and Fasteners - Power Cord - Operator's Guide - Manufacturer's Documentation - 5 Year Manufacturer's Warranty

Labconco 3-Shelf Product Heater for 7522800Heated Product Shelves consist of threealuminum shelves w (more)ith 1/4" rims, three stainless steel support rods, nineclips for shelf height adjustment, low voltage transformer with variable heatcontrol to +40C (+104F), and three rubber feet. For use with Chambers7522800, 7522900, 7443500, 7444000, 7442900 and 7867000.Product Shelves accommodate bulksamples, microtiter plates, vials or serum bottles. They are designed to fitinside Drying Chambers (sold separately). INCLUDED: The Labconco 3-Shelf Product Heater for 7522800, 115V, 60Hz includes: - Aluminum Shelves with 1/4" Rims x 3 - Stainless Steel Support Rods x 3 - Clips for Shelf Height Adjustment x 9 - Low Voltage Transformer with Variable Heat Control - Rubber Feet x 3 - Power Cord - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

KNF VC 900 Vacuum Controller, 100-240V Measurement Range 0 to 1100 mbar Measurement Accuracy ± 1 mb (more)ar Protection Class IP30 Features - Simple, versatile vacuum control with digital display - Simple, intuitive operation - Compatible with virtually all diaphragm vacuum pumps - Four different operating modes - Enables variable speed control and automatic pressure detection when paired with KNF N 920 G, N 820 G and N 840 G pumps - USB interface for PC control - Separate control unit with pressure sensors and two-step controlled valve to be placed independently from the operating unit The KNF VC 900 Vacuum Controller, 100-240V is an independent control unit for any vacuum source. Features a touchscreen control, pressure sensors, and a two-step-controlled valve. Optimizes lab bench space by allowing hands-free operation of the central vacuum unit. INCLUDED: The KNF VC 900 Vacuum Controller, 100-240V includes: - USB Cable - Power Cord - Operator's Manual - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

KNF UN842.3FTP IP44 Diaphragm Pump Ultimate Vacuum 2 mbar (abs.) Maximum Flow Rate 34L/min (2.04 m3 (more)/h) Protection Class IP 44 Features - Clean, 100% oil-free operation - Pure transfer, evacuation and compression - Chemically-resistant PTFE/FFPM flowpath - Ideal for extremely aggressive/corrosive gases and vapors - Compact, quiet and reliable - Maintenance-free TheKNF UN842.3FTP IP44 Diaphragm Pump is a dry-running device used in a wide range of laboratoryapplications. They transfer, compress and pump down without contamination. Theheart of these very compact pumps is a KNF structured diaphragm. This patenteddiaphragm was stress-optimized using the Finite Elements method. As a result,KNF was able to make the pump smaller while increasing the service life of thediaphragm. This pump is 115V. INCLUDED: The KNF UN842.3FTP IP44 Diaphragm Pump includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

KNF UN842.3FT.40P IP44-T Diaphragm Pump Ultimate Vacuum 4 mbar (abs.) Maximum Flow Rate 34L/min (2. (more)04 m3/h) Protection Class IP44 Features - Pure transfer, evacuation and compression - Highly compatible with vapors and condensation - Chemically resistant flowpath - Suitable for highly aggressive or corrosive gases and vapors - Environmentally friendly - Maintenance-free The KNF UN842.3FT.40P IP44-T Diaphragm Pump features an integrated KNF self-drying system. Designed for a wide range of applications in laboratories, including vacuum drying of chambers (for drying or heat-treating substances and components) or steam sterilizers for sterilizing instruments, vessels, filters and textiles. The KNF UN842.3FT.40P IP44-T Diaphragm Pump can be used very universally due to its high resistance to aggressive media. The KNF self-drying system allows condensed liquid to be blown out of the pump heads at a high speed during evacuation. The drying cycle can be adjusted to the requirements of the individual process using three variables. The KNF UN842.3FT.40P IP44-T Diaphragm Pump is chemical-resistant, therefore suitable for highly aggressive or corrosive gasses and vapors. This pump is 115V. The KNF UN842.3FT.40P IP44-T Diaphragm Pump is brand new in box .INCLUDED: The KNF UN842.3FT.40P IP44-T Diaphragm Pump includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

KNF UN840.3FTP IP44 Diaphragm Pump Ultimate Vacuum 8 mbar (abs.) Maximum Flow Rate 34L/min (2.04 m3 (more)/h) Protection Class IP44 Features - Pure transfer, evacuation and compression - Highly compatible with vapors and condensation - Chemically resistant flowpath - Suitable for highly aggressive or corrosive gases and vapors - Environmentally friendly - Maintenance-free TheKNF UN840.3FTP IP44 Diaphragm Pump is dry-running device used in a wide range of laboratoryapplications. They transfer, compress and pump down without contamination. Theheart of these very compact pumps is a KNF structured diaphragm. This patenteddiaphragm was stress-optimized using the Finite Elements method. As a result,KNF was able to make the pump smaller while increasing the service life of thediaphragm. This pump is 115V. INCLUDED: The KNF UN840.3FTP IP44 Diaphragm Pump includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

KNF UN840.3FT.40P IP44-T Diaphragm Pump Ultimate Vacuum 10.7 mbar (abs.) Maximum Flow Rate 34L/min  (more)(2.04 m3/h) Protection Class IP44 Features - Pure transfer, evacuation and compression - Highly compatible with vapors and condensation - Chemically resistant flowpath - Suitable for highly aggressive or corrosive gases and vapors - Environmentally friendly - Maintenance-free - Self-drying system removes condensate without affecting the vacuum level The KNF UN840.3FT.40P IP44-T Diaphragm Pump Diaphragm Pump features an integrated KNF self-drying system. Designed for a wide range of applications in laboratories, including vacuum drying of chambers (for drying or heat-treating substances and components) or steam sterilizers for sterilizing instruments, vessels, filters and textiles. The KNF UN840.3FT.40P IP44-T Diaphragm Pump Diaphragm Pump Diaphragm Pump can be used very universally due to its high resistance to aggressive media. The KNF self-drying system allows condensed liquid to be blown out of the pump heads at a high speed during evacuation. The drying cycle can be adjusted to the requirements of the individual process using three variables.

KNF UN840.1.2FTP IP44 Diaphragm Pump Ultimate Vacuum 90 mbar (abs.) Maximum Flow Rate 65L/min (3.9  (more)m3/h) Protection Class IP44 Features - Pure transfer, evacuation and compression - Highly compatible with vapors and condensation - Chemically resistant flowpath - Suitable for highly aggressive or corrosive gases and vapors - Environmentally friendly - Maintenance-free Thechemically-resistant UN840.1.2FTP diaphragm pump is a oil-free deviceused in a wide range of laboratory applications. These pumps transfer and pumpdown without contamination.The heart ofthis very compact pump is a KNF structured diaphragm. This patented diaphragmwas stress-optimized using the Finite Elements method. As a result, we wereable to make the pump smaller while increasing the service life of thediaphragm and improving performance. This pump is 115V. INCLUDED: The KNF UN840.1.2FTP IP44 Diaphragm Pump includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

KNF UN820.3FTP IP44 Diaphragm Pump Ultimate Vacuum 8 mbar (abs.) Maximum Flow Rate 20L/min (1.2 m3/ (more)h) Protection Class IP44 Features - 100% oil free transfer - Pure transfer, evacuation and compression - Highly compatible with vapors and condensation - Chemically-resistant PTFE/FFPM flowpath - Suitable for aggressive or corrosive gases and vapors - Maintenance-free - Environmentally friendly - Compact, quiet and reliable TheKNF UN820.3FTP IP44 Diaphragm Pump isa dry-running device used in a wide range of laboratoryapplications. They transfer, compress and pump down without contamination. Theheart of these very compact pumps is a KNF structured diaphragm. This patenteddiaphragm was stress-optimized using the Finite Elements method. As a result,KNF was able to make the pump smaller while increasing the service life of thediaphragm. This pump is 115V. INCLUDED: The KNF UN820.3FTP IP44 Diaphragm Pump includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

KNF UN820.3FT.40P IP44-T Diaphragm Pump Ultimate Vacuum 10.7 mbar (abs.) Maximum Flow Rate 20L/min  (more)(1.2 m3/h) Protection Class IP44 Features - Clean, 100% oil-free operation - Corrosion-resistant PTFE/FFPM flowpath - Ideal for extremely aggressive/corrosive gases and vapors - Compact, quiet and reliable - Self-drying system removes condensate without affecting the vacuum level - Maintenance-free The chemically-resistant series N820.3FT.40P diaphragm pump is a two-stge unit with an integrated PowerDry self-drying system. There is a wide range of applications for this pump in laboratories, especially whenever clean vacuum is required and moist gases must be pumped down. Examples include vacuum-drying of vacuum oven chambers (for drying or heat-treating substances and components) or steam sterilizers for sterilizing instruments, vessels, filters and textiles. Due to its high resistance to aggressive media, this pump can be used universally. The heart of these very compact pumps are KNF structured diaphragms (PTFE-coated). These patented diaphragms were stress-optimized using the Finite Elements method. As a result, we were able to make the pumps smaller while increasing the service life of the diaphragm. This pump is 115V.

KNF UN816.3KT.45P IP20-T Diaphragm Pump Ultimate Vacuum 20 mbar (abs.) Maximum Flow Rate 16L/min (1 (more).8 m3/h) Protection Class IP20 Features - Small footprint - Clean, 100% oil-free operation - Corrosion-resistant - Vacuum gauge and regulator for simple, convenient control - Compact, quiet and reliable - Can handle wet vapors without damage - Maintenance-free TheKNF UN816.3KT.45P IP20-T Diaphragm Pump isa single-head, dry-running device used in a wide range of laboratoryapplications. They transfer, compress and pump down without contamination. Theheart of these very compact pumps is a KNF structured diaphragm. This patenteddiaphragm was stress-optimized using the Finite Elements method. As a result,KNF was able to make the pump smaller while increasing the service life of thediaphragm. This pump is 115V. INCLUDED: The KNF UN816.3KT.45P IP20-T Diaphragm Pump includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

KNF UN816.1.2KT.45P IP20-T Diaphragm Pump Ultimate Vacuum 160 mbar (abs.) Maximum Flow Rate 30L/min (more) (1.8 m3/h) Protection Class IP20 Features - Clean, 100% oil-free operation - Corrosion-resistant - Vacuum gauge and regulator for simple, convenient control - Compact, quiet and reliable - Can handle wet vapors without damage - Maintenance-free TheKNF UN816.1.2KT.45P IP20-T Diaphragm Pump is a single-head, dry-running device used in a wide range oflaboratory applications. They transfer, compress and pump down withoutcontamination. The heart of these very compact pumps is a KNF structureddiaphragm. This patented diaphragm was stress-optimized using the FiniteElements method. As a result, KNF was able to make the pump smaller whileincreasing the service life of the diaphragm. This pump is 115V. INCLUDED: The KNF UN816.1.2KT.45P IP20-T Diaphragm Pump includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

KNF UN811KVP IP20-T Diaphragm Pump< Ultimate Vacuum 100 mbar Maximum Flow Rate 13L/min (.78 m3/h (more)) Protection Class IP20 Features - Clean, 100% oil-free operation - Corrosion-resistant - Compact, quiet and reliable - Small footprint - Can handle wet vapors without damage - Maintenance-free The KNFUN811KVP IP20-T Diaphragm Pump has an extremely small footprint with big use.It features a PTFE-coated diaphragm, making it ideal for aggressive orcorrosive gasses & vapors. With a flow rate of 13L/min, and a ultimatevacuum or 75 torr, the KNF UN811KVP IP20-T Diaphragm Pump is a compact,powerful, fast & reliable vacuum, made for clean results. This pump is 115V. INCLUDED: The KNF UN811KVP IP20-T Diaphragm Pump includes: - Power Cord - Operator's Guide - Manufacturer Documentation - 1 Year Manufacturer's Warranty

KNF UN811KV.45P IP20-T Diaphragm Pump Ultimate Vacuum 100 mbar Maximum Flow Rate 13L/min (.78 m3/h) (more) Protection Class IP20 Features - Clean, 100% oil-free operation - Corrosion-resistant - Vacuum gauge and regulator for simple, convenient control - Small footprint - Can handle wet vapors without damage - Maintenance-free The KNFUN811KV.45P IP20-T Diaphragm Pump has an extremely small footprint with biguse. It features a PTFE-coated diaphragm, making it ideal for aggressive orcorrosive gasses & vapors. With a flow rate of 13L/min, and an ultimatevacuum or 75 torr, the KNF UN811KV.45P IP20-T Diaphragm Pump is a compact,powerful, fast & reliable vacuum, made for clean results. This pump is 115V. INCLUDED: The KNF UN811KV.45P IP20-T Diaphragm Pump includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

KNF SIMDOS 10 IP65 UFEM 1.10 ST.18RC2 Diaphragm Liquid Dosing Pump Flow Rate Range 1 to 100 ml/min  (more)Programmable Dosing 1 to 999 ml Maximum Suction Height 3 mWg Features - Small footprint - Simple, intuitive operation - Manual, analog control - Self-priming, can run dry - Consistent, reliable flow rate - Simple calibration - Adaptable to fluid characteristics The KNF SIMDOS 10 IP65 UFEM 1.10 ST.18RC2 Diaphragm Liquid Dosing Pump is a liquid dosing/metering diaphragm pump. Offers wetted material combinations for optimal chemical resistance. Manual control of flow rate and dosing volume with LCD graphic display. INCLUDED: The KNF SIMDOS 10 IP65 UFEM 1.10 ST.18RC2 Diaphragm Liquid Dosing Pump includes: - Connection Kit (Hose and Screw-in Fittings) - Remote Control Cable - Filter - Power Cord - Operator's Manual - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

KNF SIMDOS 10 IP65 UFEM 1.10 FT.18RC2 Diaphragm Liquid Dosing Pump Flow Rate Range 1 to 100 ml/min  (more)Programmable Dosing 1 to 999 ml Maximum Suction Height 3 mWg Features - Small footprint - Simple, intuitive operation - Manual, analog control - Self-priming, can run dry - Consistent, reliable flow rate - Simple calibration - Cycle mode - Adaptable to fluid characteristics - Start/Stop through logic control (TTL) - Reset/Prime through logic control (TTL) - Output signal fault alarm The KNF SIMDOS 10 IP65 UFEM 1.10 FT.18RC2 Diaphragm Liquid Dosing Pump is liquid dosing/metering diaphragm pump. Offers wetted material combinations for optimal chemical resistance. Equipped with manual, analog, and RS-232 controls with LCD graphic display. INCLUDED: The KNF SIMDOS 10 IP65 UFEM 1.10 FT.18RC2 Diaphragm Liquid Dosing Pump includes: - Connection Kit (Hose and Screw-in Fittings) - Remote Control Cable - Filter - Power Cord - Operator's Manual - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

KNF SIMDOS 02 IP65 FEM 1.02 ST.18RC Diaphragm Liquid Dosing Pump Flow Rate Range 0.03 to 20 ml/min  (more)Programmable Dosing 0 to 999 ml Maximum Suction Height 2 mWg Features - Small footprint - Simple, intuitive operation - Manual, analog control - Self-priming, can run dry - Consistent, reliable flow rate - Simple calibration - Cycle mode - Adaptable to fluid characteristics The KNF SIMDOS 02 IP65 FEM 1.02 ST.18RC Diaphragm Liquid Dosing Pump is a liquid dosing/metering diaphragm pump. Offers wetted material combinations for optimal chemical resistance. Manual control of flow rate and dosing volume with LCD graphic display. INCLUDED: The KNF SIMDOS 02 IP65 FEM 1.02 ST.18RC Diaphragm Liquid Dosing Pump includes: - Connection Kit (Hose and Screw-in Fittings) - Remote Control Cable - Filter - Power Cord - Operator's Manual - Manufacturer's Documentation - 2 Year Manufacturer's Warranty