All categories

Lauda Eco Gold with Lauda Eco RE 620 Water Bath This was removed from a university lab where it was  (more)surplus to requirements. The unit powers up and is in full working order. (Thermometer not included). It is in excellent cosmetic condition with minor marks.

Seward Rondo Pastry Brake - Dough Sheeter This was removed from a commercial kitchen where it was s (more)urplus to requirements. The two pastry belts have heavy signs of wear and use This pastry brake has been tested and all functions are working although the pastry belts are heavily worn. Roller height lever to control thickness of pastry, between 0.5 cm and 25cm Aluminium flour tray 48cm x 12cm x 7cmWork height 90cmRetractable wooden extension shelf, 60cm x 40cmWorking width 90cm, length with shelf extended 275cm, height 115cmStorage compartment under belt area 88cm x 65cm x 65cm

This Fluidigm C1 Single Cell Auto Prep System was removed from a university lab where it was surplus (more) to requirements. The unit powers up and passes all self checks. It is in excellent cosmetic condition with minor marks from use. Firmware Version - 2.3-1.2-2.8-2.0Software Version - 2.2.3.1Chips Supported - 178;177;179;186;191

4 X ZIEHL-ABEGG Type - EWRG 210 LB/4 Industrial Blower Fans These were removed from a university lab (more) where they were surplus to requirements. All 4 Units power on and are powerful they are in Good Condition with Minimal Wear and just a few minor scratches here and there Model - EWRG 210 LB/4

Esco NordicSafe NC2 - 4L8 Class 2 Safety Cabinet This was removed from a university lab where it wa (more)s surplus to requirements. The unit powers up and is in full working order. It is in good cosmetic condition with minor marks from use. Model: NC2-4L8Serial#: NC2-4L8-2013-80689

Nikon Eclipse 50i Microscope This was removed from a university lab where it was surplus to requirem (more)ents. The unit powers up and is in good working order, though we were unable to test the camera without the software. It is in good cosmetic condition with minor marks. Item includes the following: Nikon CFI 19x/22 Eyepiece x 2 Nikon Plan 100x/1.25 Oil Ph3 DL∞/0.17 WD 0.2 Nikon Plan 20x/0.40 Ph1 DL∞/0.17 WD 1.2 Nikon Plan 40x/0.65 Ph2 DL∞/0.17 WD 0.56 LV-TT2 Trinocular Tube Mikrotron EoSens MC1362Serial#: 00704

Anton Parr Multiwave 3000 Microwave Reaction System + Carousel This was removed from a university la (more)b where it was surplus to requirements. The unit powers up but was quickly turned off as it requires an external extraction system. it is in good cosmetic condition with minor marks. Included are; 1x 8 tube Rotor carousel1x Rotor cover2x Plastic rollers1x Bag of plastic tubes1x Stainless steel key2x Instruction manuals1x Sample preparation manual1x Instruction manual CD1xSafety disc1x Exhaust ring2x Bags of plastic fittings4x Plastic tubes, unopened1x Rubber grommet1x Keyboard connection adaptor1x USB connection

Sartorius Cubis MCA36201S-2S00-0 High Capacity Balance Scales This was removed from a university la (more)b where it was surplus to requirements. The unit powers up and has been tested with a set of calibration weights (not included). It is in full working order. It is in good cosmetic condition with marks from use.

This Optika Inverted Microscope Model XDS-2 was removed from a university lab where it was surplus t (more)o requirements. The unit powers up and the lamp works, but it is otherwise untested as there are no objectives with it. All the moving parts move freely. It is in good cosmetic condition with only minor marks from use. 2x Eyepieces:EW 10X/22

This item has just arrived in our stock. Please enquire for further details.

This Eppendorf Refrigerated Laboratory Centrifuge 5804-R was removed from a university lab where it  (more)was surplus to requirements The unit has had a replacement actuator and gas strut fitted by a service engineer who then fully tested the unit. Speed tested to 3600rpm (rotor not included). It was then temperature tested with a digital thermometer (not included) 37ºC our thermometer showed 34ºC.4ºC our thermometer showed 1.0ºC.-9ºC(min) our thermometer showed -5.0ºC. We would suggest that it was the probe placement that caused the temp readings to be a bit inaccurate.

New Brunswick Innova 4400 & Innova Shaking Incubator. This was removed from a university la (more)b where it was surplus to requirements. The unit has been assessed by a service engineer and has had the following replacement parts fitted. Motor.Temperature sensor bracket.Door mechanism.Gas struts.Base.Various panels. It has been tested at various speeds and is shaking well. It has been temperature tested at:37ºC - It reached this temp fine. We calibrated it with our SmartVue Thermometer (not included).80ºC - It reached 73ºC and it was at this temperature for quite a while. The unit is in good cosmetic condition but has marks from use. The manual is supplied.

9 x MilliporeSigma Compact 4 Drawer Locking Cart Lab These items was removed from a university lab  (more)where it was surplus to requirements. Condition as follows: Very Good: 5Good: 2Reasonably Good: 2 All keys included.

Eppendorf F101h-86 CryoCube Ultra Low Temperature Freezer Lab This was removed from a university lab (more) where it was surplus to requirements. The unit powers up and has been tested with a digital thermometer (not included). It is in good working order. It is in very good condition.

Mettler Toledo LabMax Automatic Lab Reactor This item was removed from a university where it was sur (more)plus to requirement. It is in good cosmetic condition and powers on, we are unable to test it further at our facility. The lab confirmed it was in full working order prior to removal.

This Narishige PC-10 Dual Stage Glass Micropipette Puller was removed from a university lab where it (more) was surplus to requirements. The unit powers up and the coil visibly heats. It was not tested further. It is in good cosmetic condition but has some marks from use.

Job Lot of Hollow Cathode Lamps These were removed from a university lab where they were surplus to  (more)requirements. There are 46 boxes of various brands, and it is uncertain if they are in working condition except for one box that has been labelled 'Not working.' Job lot includes:- S&J Juniper & CO Palladium 247.6 nm Cat#: 4140S&J Juniper & CO Cobalt 240.7nm Cat#: N/AS&J Juniper & CO Europium 459.4nm Cat#: 4117S&J Juniper & CO Lead 217.0nm Cat#: 3129S&J Juniper & CO Gold 242.8nm Cat#: 4121S&J Juniper & CO Cobalt 240.7nm Cat#: 4113S&J Juniper & CO Tin 233.5nm Cat#: 4162S&J Juniper & CO Gadolinium 368.4nm Cat#: 4118S&J Juniper & CO Chromium 357.9nm Cat#: 5112PES&J Juniper & CO Tellurium 214.3nm Cat#: 4157S&J Juniper & CO Cadmium 228.8nm Cat#: 4108S&J Juniper & CO Selenium 196.0nm Cat#: 4151S&J Juniper & CO Ruthenium 349.9nm Cat#: 4148S&J Juniper & CO Silicon 251.6nm Cat#: 4152S&J Juniper & CO Titanium 364.3nm Cat#: 5163S&J Juniper & CO Rhodium 343.5nm Cat#: 4146S&J Juniper & CO Indium 303.9nm Cat#: 4125S&J Juniper & CO Magnesium 279.5nm Cat#: N/AS&J Juniper & CO Mercury 253.7nm Cat#: 4134S&J Juniper & CO Bismuth Serial#: 73940Baird Atomic LTD Neon 224.6nm Cat#: C832 SNPerkin Elmer Lumina Lamp Part#: N305-0187Perkin Elmer Intensitron Lamp Cd Part#: 303-6016Perkin Elmer Intensitron Lamp Sb Part#: N066-1284Perkin Elmer Intensitron Lamp Cd Part#: 303-6016Perkin Elmer Intensitron Lamp Cu Part#: N305-0121Perkin Elmer Intensitron Lamp Part#: N305-0146Enbeeco Hallow Cathode Lamp Ar Type: C831/SrThermo Scientific Hallow Cathode Lamp Palladium Part#: B 89748Hitachi Hallow Cathode Lamp 343.5 Ne Part#: 207-2017S&J Juniper & CO Antimony Part#: 4892dS&J Juniper & CO Molybdenum 313.3nm Part#: 4746S&J Juniper & CO Cadmium 228.8nm Part#: 4101Rank Hilger Pt Cat#: FL2164Varian Fe/Co/Ni/Mn/Cu/Cr Part#: 56-100076-00Hilger & Watts Co/Mn/Fe/Cu Cat#: FL1210Hilger & Watts Ti Cat#: FL1169Pye Unicam Silver Part#: 611472Varian Techtron Pb Cat#: 4R1352Varian Techtron Cd Cat#: 4N934Pye Unicam A1 309.3nm Part#: 9423Baird Ne 249.8nm Cat#: C832-BCathodeon Ltd Ne Cat#: 3QNY/FeS&J Juniper & CO Ca/Mg 422.6/285.2 Cat#: 3621Phillips Cu Part#: 9423 390 30291Activion Ni 232/341 Serial#: 27387

Priorclave PS/QUA/EH320 Front Loading Steam Autoclave This was removed from a university lab where  (more)it was surplus to requirements. The unit powers up but appears to have a main board fault. It is sold for spares/repairs.

Carl Zeiss Axiovert 200M Inverted Microscope This was removed from a university lab where it was sur (more)plus to requirements. The unit powers up but has faults. Faults; - Unable to move the stage with onboard or mechanical controls, therefore, unable to focus on the slide. - The display is illuminated but shows no text. - No cable for PALM joystick control The automated functions that work are; - Light increase/decrease - Filter selection - Objectives selection - Optical view selection Included are; 2 x Eye Pieces: W-Pl 10x/23 (1016-758) 3 x Objectives:- 1x Zeiss FLUAR 5x/0.25 ∞/0.17 (44 01 25) 1x Zeiss Ph3 Plan-NEOFLAUR 100x/1.30 oil ∞/0.17 (1066-987) 1x Zeiss LD ACHROPLAN 63x/0.75 Korr Ph2 ∞/0.17 Ph2 (44 08 61) 1x P.A.L.M Microlaser Technologies Joystick Controller. 1x Zeiss Lamp Power supply - HBO 100W 1003-928 (426-784)S/N: N 01415621Powers on.Unit is displaying 140.10 Hrs

This was removed from a university lab where it was surplus to requirements. The lab confirmed it wa (more)s in good working order prior to collection. PTI Photon Technology International FluorimeterFront SN - 1691Back SN - 1570 - MP1 PowerArc Arc Lamp HousingSN - 0002 Power Arc B PTI 814 Multiplier Detection SystemSN - 1596-810 Dimensions - 65 x 80 x 30cm PTI BryteBoxPN - 30-102528SN - 2320 PTI Lamp Power SupplySN - 1808-LPS220B PTI Motor DriverModel - MD-5020SN - 1704-5020 Quantum Northwest Temperature ControlModel - TC 125SN - 2872 Eheim Eco Pro External FilterType - 2032 51 0SN - 10074 All units power on and connect up with the cables (cables are labelled with numbers/letters for easy assembly). Comes with PC, Keyboard & MouseThe PC powers on and has FeliX32 Fluorescence Analysis SoftwarePC Log in Username & Password - FluorimeterFeliX32 Software Password - pti Fluorimeter Undo DiskFluorescence Master Series User ManualArc Lamp Housing ManualFeliX32 ManualEheim Eco Pro Manual

This Bio Rad QX100 Droplet Reader was removed from a university lab where it was surplus to requirem (more)ents. The unit powers up but has not been tested further. It is in reasonably good cosmetic condition with some marks from use. Power supply included. With 96 well plate holder and 2 x 1 litre bottles for waste and oil

This Idaho Technology LightScanner Early Beta was removed from a university lab where it was surplus (more) to requirements This item is in good cosmetic condition and powers up, but we are unable to test it further.

Beckman Coulter JS-5.3 Rotor & Buckets Lab This item was removed from a university where it was  (more)surplus to requirement. It is in good used cosmetic condition. Included are the following: 1 x Beckman Coulter JS-5.3 Rotor 4 x Beckman Coulter Bucket

Thermo Scientific Versacool Chiller This item was removed from a university lab where it was surplus (more) to requirements. It is in good cosmetic condition and full working order. Does not include any additional cable or tubing.

Thermo Fluoroskan Ascent 374 Microplate Reader Lab This item was removed from a university where it (more) was surplus to requirement. It is in good cosmetic condition and powers on, we are unable to test it further at our facility.

New Brunswick Scientific Innova U725G Ultra Low-Temperature Freezer Lab U725 -86 This was removed fr (more)om a university lab where it was surplus to requirements. The unit powers up and has been tested with a digital thermometer (not included). It is in good working order. It is in good cosmetic condition. Internal dimensions: L61 W87 H136cmIncludes 2 Shelves: 55 x 84cm The manual and keys are included.

IRAffinity-1S Fourier Transform Infrared Spectrophotometer Lab This item was removed from a universi (more)ty where it was surplus to requirement. It is in good cosmetic condition and powers on, we are unable to test it further at our facility. We are told the instrument is technically working, but it needs some parts replaced. For this reason it is sold for spares/repairs.

Infinity 1 Microscope Camera With Software Lab This item was removed from a university where it was  (more)surplus to requirement. It is brand new and sealed in its original packaging. Included software: Infinity Analyze - Complete Image AnalysisInfinity Capture - Basic capture and video

Panasonic MDF-U55V Ultra Low Temperature Freezers ULT It is in good cosmetic condition and powers on (more), we are unable to test it further at our facility. The unit powers up and is in good working order (thermometer not included). It is in good cosmetic condition internally and externally.

3D Systems Monochrome ProJet 360 3D Printer Floor Standing w/ Consumables Lab This item was removed  (more)from a university where it was surplus to requirement. It is in good cosmetic condition and powers on. The previous client has stated it was fully functional when last used. The table shown in the second image is not included. Also included: - 2 x 1 litre Visijet PXL Clear order No. 360434 - 1 x 7kg tub of ZP131 printing media powder - 1 x Litre 3D Systems ZB 60 clear binder solution - 1 x Data lead - 1 x Small grease gun - 1 x 49g tube of multi-purpose grease - 1 x 59ml bottle of 3D systems cleaning solution Part 360 444 - 5 x Small cleaning brushes - 2 x Hand scrapers