Agilent 1100 G1313A HPLC Autosampler

The Agilent 1100 G1313A autosampler is an analytical HPLC autosampler for pharmaceutical quality control, environmental analysis, food analysis and routine chromatography.

The autosampler handles 100 2 mL vials in one tray. It also supports 40 2 mL vials in a half tray or 15 6 mL vials in a half tray using Agilent vials. Communication interfaces include CAN, GPIB, RS232C and APG remote. Optional connections include four external contact closures and BCD vial number output.

The used autosampler was internally tested and maintained. It was refurbished if needed.

Agilent 1100 G1313A Autosampler

The Agilent 1100 G1313A is an autosampler for analytical HPLC and routine chromatography. It supports pharmaceutical quality control, environmental analysis and food analysis workflows.

Sample Handling

• Injection range from 0.1 to 100 µL in 0.1 µL increments
• Up to 1500 µL with multiple draw when the required hardware modification is installed
• 1 to 99 replicate injections per vial
• Minimum sample volume of 1 µL from 5 µL of sample in a 100 µL microvial
• Minimum sample volume of 1 µL from 10 µL of sample in a 300 µL microvial
• Sample viscosity range from 0.2 to 50 cP
• Typical injection cycle time of 50 seconds, depending on draw speed and injection volume
• Typical carryover below 0.1%
• Typical carryover below 0.05% with external needle cleaning

Sample Capacity

• 100 × 2 mL vials in one tray
• 40 × 2 mL vials in a half tray
• 15 × 6 mL vials in a half tray using Agilent vials

Precision and Control

• Typical precision below 0.5% RSD of peak areas from 5 to 100 µL
• Typical precision below 1% RSD of peak areas from 1 to 5 µL
• Early maintenance feedback
• Electronic maintenance and error records
• Leak detection and safe leak handling
• Low voltages in maintenance areas
• Error detection and display

Communications

• Controller Area Network
• GPIB, IEEE-448
• RS232C
• APG remote standard
• Optional four external contact closures
• BCD vial number output

This used Agilent 1100 G1313A autosampler was internally tested and maintained. It was refurbished if needed.

What these specifications mean

The 0.1 to 100 µL injection range covers standard analytical HPLC sample volumes. Multiple draw can extend injection volume to 1500 µL when the required hardware modification is present.

The autosampler supports 1 to 99 replicate injections from one vial. This allows repeated injections without manually reloading the sample between runs. Typical precision is below 0.5% RSD of peak areas from 5 to 100 µL and below 1% RSD from 1 to 5 µL. Typical carryover is below 0.1%, or below 0.05% with external needle cleaning.