Precision Balances Accessories
We personally find you the right used, refurbished and new precision balances accessories instruments & equipment from verified suppliers.
Precision balances accessories are the replacement parts, calibration aids and supporting components that keep laboratory weighing instruments running, covering everything from draft shields and weighing pans to calibration weights, dust covers and spare display modules. The Questpair catalogue holds 1736 such listings across 18 verified suppliers and distributors, drawn from 11 countries. New, used and refurbished units are listed side by side, and 82 percent of the listings are used. Prices span a wide range because a single calibration weight and a complete replacement balance housing sit in the same category. These components support gravimetric analysis, where repeatable weighing to a fixed readability decides the quality of a result.
Updated:
Precision Balances Accessories product list
Not the exact instrument you need?
Tell our scientists what you are after. We track it down, including off-market supply.
Not the exact instrument you need?
Tell our scientists what you are after. We track it down, including off-market supply.
Showing 1–40 of 969 listings
Show 40 more listingsBuying guide
Which accessory actually fits the balance you own?
The first thing to settle is compatibility, because an accessory for a precision balance is almost never universal. A weighing pan, a draft shield or a spare display is cut to one manufacturer's model line and often to one generation within it, so the model number on the instrument matters more than any specification on the accessory itself. Confirm the exact balance designation before anything else, since a part that is close but not identical will not seat correctly and can disturb the readability the balance was built to deliver.
Calibration weights are the one accessory class where the specification leads instead. A weight is defined by its OIML or ASTM class, which fixes its tolerance, and that class has to match or exceed the readability of the balance it tests. A fine analytical balance reading to a tenth of a milligram needs a tighter class than a bench scale reading to a tenth of a gram. Buying a looser class saves money and defeats the purpose, so the class is the figure to read first here, ahead of the nominal mass.
On a used accessory, condition carries more weight than the datasheet. Check calibration weights for surface damage, corrosion or handling marks, because any of these shifts the mass and a used weight should ideally arrive with a recent calibration certificate or be recertified before trust. For a used draft shield or housing, look for cracked panels and warped seals, since a poor seal lets air movement reach the pan and undermines weighing at the microgram end.
Price here spans more than three orders of magnitude, from EUR 9 to EUR 38.740, with an average around EUR 1.523. The lower end covers single weights, pans and covers; the upper end covers complete sub-assemblies and multi-piece weight sets. A refurbished set costs less than a new one and fits most budgets without compromising class, and the full range is available for sale across the listed suppliers. Brand concentration follows the balances themselves: Ohaus, Mettler Toledo, Sartorius, A&D, Globe Scientific account for most of what is listed, which keeps parts findable and lets a buyer compare like-for-like replacements rather than guessing at fit.
Types of Precision Balances Accessories
Which balance accessory types are listed here?
Among the listings that specify a type, the accessories group by the instrument they serve: analytical balance parts, precision balance parts, and components for the broader run of laboratory scales and electronic balances. The analytical-balance accessories are the most exacting, built for weighing at readability down to 0.1 mg or finer, which is the regime of gravimetric analysis, standard preparation and quantitative chemistry. They include fitted draft shields, anti-static kits and high-class calibration weights, because at this resolution a stray air current or a static charge is enough to move the reading.
Precision-balance and laboratory-scale accessories cover a coarser range, serving instruments used for routine sample preparation, formulation and bulk weighing. Here the parts are more robust and less sensitive to environment: larger weighing pans, protective in-use covers, and calibration weights in looser classes. Electronic balance components, including display modules, load cells and power supplies, cut across both groups, since the electronics are what most often need replacing on an otherwise sound instrument.
These components are also used across life sciences work wherever accurate mass underpins a protocol. Reagent and media preparation for cell culture depends on repeatable weighing, as does the gravimetric step in protein purification buffer formulation, and calibration weights for an analytical balance in molecular biology keep an enzyme or primer dilution honest. A laboratory balance draft shield for microbalance weighing matters most where the smallest samples, such as reference standards in proteomics, are handled.
The brands behind the balance accessory listings
The accessory listings track the installed base of the balances themselves, so Ohaus, Mettler Toledo, Sartorius, A&D, Globe Scientific dominate. For a buyer, that concentration is an advantage: parts for these makers are the most available, model-to-model comparison is straightforward, and price levels are predictable rather than one-off. Fit is still model-specific, so matching the accessory to the exact balance generation remains the deciding step even within a familiar brand.
What a used balance accessory costs here
The split runs heavily to pre-owned stock, with 1430 used listings against 306 new. Prices range from EUR 9 to EUR 38.740. The spread covers single calibration weights and covers at one end and complete weight sets and replacement sub-assemblies at the other, which is why a category average of EUR 1.523 sits well above the cheapest entry.
Frequently asked questions
What are precision balances accessories?
They are the replacement parts, calibration weights, draft shields, weighing pans, and consumables that keep laboratory weighing instruments accurate and in service. They support the balance rather than taking measurements themselves.
What does a precision balances accessory mean in practice?
In practice it means any item that attaches to or supports a balance, such as a density kit, an anti-static device, a tare container, or a printer interface. Each one serves a specific function in weighing rather than replacing the instrument.
How do precision balances accessories work?
Each type works alongside the balance for a defined purpose: a draft shield blocks air currents that disturb fine readings, calibration weights verify the balance against a known mass, and weighing pans or containers hold the sample. They depend on fitting the specific balance model to function correctly.
What types of precision balances accessories are there?
The listings sort by the kind of balance they serve, covering the analytical balance, precision balance, laboratory scale, laboratory weighing scale, laboratory balance, and electronic balance. Across all of these sit calibration weights, from single class pieces to full OIML sets.
What are precision balances accessories used for?
They keep weighing instruments accurate and usable during sample preparation, gravimetric analysis, and routine verification. Common tasks include metering culture media, weighing resins and salts, and checking a balance against a reference mass.
How do I choose the right accessory for my balance?
Start with the brand and model of your balance, since an accessory has to fit a specific instrument, and use the brand name on the listing as the first filter. A draft shield, pan, or density kit from the maker of your balance is the safe match, while some parts are shared across a maker's range.
What is the difference between refurbished and used accessories?
Used accessories are sold in their existing condition, while refurbished ones have been checked or reconditioned before resale. Both are listed at lower prices than new items.
How much do precision balances accessories cost?
Prices range from EUR 9 to EUR 38.740, with an average of EUR 1.523. The low end covers individual calibration weights, spare pans, and small consumables, while the high end covers complete enclosures, full calibration weight sets, and accessory bundles.
Which brands are available for these accessories?
The listings concentrate around Ohaus, Mettler Toledo, Sartorius, A&D, and Globe Scientific. Because an accessory has to fit a specific balance, matching the brand to your instrument matters more here than for a standalone device.
Can I get a warranty on a refurbished accessory?
A warranty is often possible and is arranged in consultation for the specific listing. Terms are not set centrally, so check the individual listing when this matters to you.
Can I find parts for these accessories?
Parts can be sourced via Questpair. Where a part is shared across a maker's range, one listing may fit several models, so the brand name is the first thing to check.
How long do precision balances accessories last?
Lifespan varies by item: calibration weights and enclosures last many years with careful handling, while consumables and weighing pans wear and are replaced more often. Regular calibration checks reveal when a worn or damaged accessory is affecting accuracy.
Should I buy new or refurbished accessories?
Used and refurbished accessories are listed at lower prices than new, which for a cataloged part such as a calibration weight or a draft shield often makes the used listing the practical choice. For either option, review the individual listing and arrange warranty in consultation.
Where can I buy precision balances accessories?
They are available on Questpair from 18 verified suppliers and distributors across 11 countries. The category spans 1736 listings in new, used, and refurbished condition.
What are the lead time and shipping like?
Lead time and shipping depend on the individual seller and the item's location across the 11 countries represented. The specific listing shows the details, and Questpair specialists respond within one hour to questions about a given item.
How do I handle calibration and maintenance?
Every balance is verified against a known mass, so calibration weights, from single class pieces to full OIML sets, are central to this. Cleanliness also matters: clean weighing pans and anti-static kits help keep readings trustworthy. Questpair does not carry out servicing itself.
Which types in this category are listed most, and who reaches for each?
Among listings that specify a type, the analytical balance and the precision balance account for the bulk, with the laboratory scale, laboratory weighing scale, and electronic balance behind them. Analytical balance accessories cluster around environmental protection and cleanliness for fine readings, while precision balance parts lean toward sample containers, below-balance weighing hooks, and density kits.
Which brands dominate this category, and what does that mean for a buyer?
Listings concentrate around Ohaus, Mettler Toledo, Sartorius, A&D, and Globe Scientific. Their strong presence means parts for their instruments are easier to find and compare across sellers, and availability from larger makers tends to keep replacement prices steadier.
What separates the cheapest accessories here from the most expensive?
The low end of the band covers individual calibration weights, spare pans, and small consumables. The high end covers complete enclosures, full calibration weight sets, and accessory bundles sold alongside a balance, which is why prices stretch from EUR 9 to EUR 38.740.