Accessories Other
We personally find you the right used, refurbished and new accessories other instruments & equipment from verified suppliers.
Accessories Other is a catch-all laboratory category for the connectors, replacement parts and bench components that support instruments without belonging to any single instrument class. The listings span electrical and circular connectors, mass spectrometry consumables and laboratory glassware, offered new, used and refurbished across 16 verified suppliers and distributors in 7 countries. 92 percent of the listings are used. Prices run from EUR 1 to EUR 7.747, a spread that reflects how little a single connector costs against a complete accessory set. A buyer reaches this category looking for a specific supporting part rather than a headline instrument, so the match hinges on part number and fit rather than on brand alone.
Updated:
Accessories Other product list
Not the exact instrument you need?
Tell our scientists what you are after. We track it down, including off-market supply.
Not the exact instrument you need?
Tell our scientists what you are after. We track it down, including off-market supply.
Showing 1–40 of 613 listings
Show 40 more listingsBuying guide
The part number settles most purchases here, and it settles them before any other question is worth asking. A category this broad holds items that look alike and are not interchangeable: a circular mil-spec connector and an ordinary circular connector share a shape and differ in shell size, keying, contact count and insert arrangement, and a connector that is one pin out or one shell size wrong is a connector that does not go in. Match the manufacturer part number against the mating half you already own, confirm the gender, the contact layout and the panel cut-out, and treat a photograph as confirmation rather than as proof. The same discipline applies to a mass spectrometry accessory, where a source part or ion-transfer component is specific to an instrument series and will not cross between makers.
92 percent of the listings are used, which is where the second question lives. A connector is a passive part and ages gently, so a used shell with clean, unbent contacts and intact keying is often as serviceable as a new one; what a buyer verifies is mechanical condition rather than calibration, since there is nothing to calibrate. A used mass spectrometry accessory is a different matter, because residue and wear carry over from the previous instrument, and the listing should state whether it has been cleaned. Used laboratory glassware wants inspection for chips, star cracks and ground-joint wear before it goes near a vacuum line or a solvent.
Price sits across a wide band, and the band is informative once read against what occupies each end. A single straight plug connector or a length of tubing costs little, and such an item can fit almost any budget; a complete connector kit or a boxed mass spectrometry accessory sits far higher. Prices run from EUR 1 to EUR 7.747, with an average near EUR 316. Refurbished and used parts listed for sale are more affordable than new equivalents, which matters most on obsolete connectors that a maker no longer stocks. Amphenol and TE Connectivity dominate the connector listings, so cross-referencing a part against their numbering is the fastest route to a confident order.
Types of Accessories Other
Which accessory types are listed here?
Among the listings that specify a type, the catalogue is led by connectors in several forms. A circular mil-spec connector is a ruggedised circular connector built to a military specification, with defined shell sizes, keying and environmental sealing, and it is the part a buyer reaches for when a signal or power line has to survive vibration or moisture. A plain electrical connector or circular connector covers the broader population of signal and power interconnects, and a straight plug connector is the in-line, non-angled variant that mates with a panel receptacle. These parts separate on shell size, contact count and insert arrangement rather than on appearance, which is why the part number does the work. Alongside the connectors sit mass spectrometry accessories, the source components, ion-transfer parts and consumables that keep an MS system running, and laboratory glassware, the flasks, tubes and joints that support wet-chemistry work at the bench.
The brands behind the Accessories Other listings
The connector population is anchored by Amphenol, Various, Mettler Toledo, Thermo Scientific, TE Connectivity. For a buyer, that concentration is practical rather than decorative: Amphenol and TE Connectivity publish deep, stable part-numbering, so a model found here can be cross-referenced against a datasheet and matched to a mating half with confidence, and spares for widely used series stay findable years after a run ends. Mettler Toledo and Thermo Scientific appear on the instrument-support side, where an accessory ties back to a specific balance or mass spectrometer. A large "Various" share reflects the nature of the category, individual parts from many makers, which is why the listing's own part number matters more than the badge on it.
What a used accessory costs here
92 percent of the listings are used, and the price band runs from EUR 1 to EUR 7.747, averaging around EUR 316. The spread covers everything from a single connector shell to a complete accessory set, so the average says more about the mix than about any one part. Several of these supporting components do real work in life sciences: a mass spectrometry accessory feeds proteomics and molecular diagnostics, where the MS system is the readout, and laboratory glassware is also used for cell culture media preparation, electrophoresis buffer work and protein purification at bench scale. Parts for a listed item can be sourced via Questpair, and a warranty is arranged in consultation for the specific listing.
Frequently asked questions
What is an Accessories Other item?
It is a supporting laboratory component that does not belong to a single instrument class, such as a connector, a replacement part or a bench item. The category groups electrical and circular connectors, mass spectrometry consumables and laboratory glassware together because they share the role of supporting instruments rather than being instruments themselves.
What does Accessories Other mean as a category label?
It is a catch-all heading for parts that keep instruments running but cannot be filed under any one headline instrument. A buyer lands here looking for a specific supporting part identified by its part number, not for a complete system.
How do these accessories work?
Each type works differently: a connector mates signal or power lines through a defined shell, contact count and insert arrangement, while a mass spectrometry accessory handles source or ion-transfer functions inside an MS system. Laboratory glassware holds and transfers liquids at the bench. The common thread is that each supports a larger instrument rather than operating alone.
What types are in this category?
The listings are led by connectors in several forms: circular mil-spec connectors, plain electrical and circular connectors, and straight plug connectors. Alongside these sit mass spectrometry accessories and laboratory glassware. Connectors separate on shell size, contact count and insert arrangement rather than on appearance.
What is an Accessories Other item used for?
These parts support instruments: a connector carries signal or power, a mass spectrometry accessory feeds proteomics and molecular diagnostics work where the MS system is the readout, and laboratory glassware is used for tasks like cell culture media preparation, electrophoresis buffer work and protein purification at bench scale.
How do I choose the right part?
Match the manufacturer part number against the mating half you already own, then confirm the gender, contact layout and panel cut-out. A connector that is one pin out or one shell size wrong will not fit, so treat a photograph as confirmation rather than proof.
What is the difference between refurbished and used?
A used part is sold in its existing condition, while a refurbished part has been cleaned or reconditioned before listing. For a passive connector the distinction matters little; for a mass spectrometry accessory it matters more, since residue and wear carry over, and the listing should state whether it has been cleaned.
How much does an Accessories Other item cost?
Prices run from EUR 1 to EUR 7.747, averaging around EUR 316. The spread reflects the mix: a single connector shell or a length of tubing costs little, while a complete connector kit or a boxed mass spectrometry accessory sits far higher.
Which brands appear most in this category?
The connector listings are anchored by Amphenol and TE Connectivity, with Mettler Toledo and Thermo Scientific on the instrument-support side. A large share is listed under Various, reflecting individual parts from many makers, which is why the part number matters more than the badge.
Is a warranty available on refurbished parts?
A warranty is often possible and is arranged in consultation for the specific listing. Terms depend on the individual part rather than being set across the category.
Can I get parts for a listed item?
Parts can be sourced via Questpair. Because many items here are themselves parts, the part number on the listing is what lets a buyer cross-reference a spare against a datasheet.
How long do these accessories last?
A connector is a passive part and ages gently, so a used shell with clean contacts and intact keying often lasts as long as a new one. Mass spectrometry accessories and glassware wear with use, so lifespan depends on handling and whether a used unit shows residue, chips or joint wear.
New versus used: which should I buy?
Used and refurbished parts are listed at lower prices than new ones, which matters most on obsolete connectors a maker no longer stocks. For a passive connector in good mechanical condition the used unit is often as serviceable, so weigh the specific listing and arrange warranty in consultation.
Where can I buy these accessories?
They are offered through verified suppliers and distributors in the Questpair catalogue, across 16 suppliers in 7 countries. Listings cover new, used and refurbished items.
What about lead time and shipping?
Lead time and shipping depend on the individual listing and the supplier holding the part. For a specific delivery timeframe, the listing and its supplier are the point of reference.
Do these parts need calibration or maintenance?
A connector has nothing to calibrate, so a buyer verifies mechanical condition instead: clean, unbent contacts and intact keying. A used mass spectrometry accessory should be checked for residue, and used glassware should be inspected for chips, star cracks and ground-joint wear before it goes near a vacuum line or solvent.
Which types are listed most and who reaches for each?
Connectors lead the catalogue. An engineer facing vibration or moisture on a signal line reaches for a circular mil-spec connector; a general wiring job uses a plain electrical or circular connector or a straight plug variant. Lab chemists and MS operators reach for mass spectrometry accessories and laboratory glassware to support bench and instrument work.
Which brands dominate and what does that mean for me as a buyer?
Amphenol and TE Connectivity dominate the connector listings. Both publish deep, stable part-numbering, so a model found here can be cross-referenced against a datasheet and matched to a mating half with confidence, and spares for widely used series stay findable years after a production run ends.
What separates the cheap end of the price band from the expensive end?
The low end holds single items: one straight plug connector, a length of tubing, a single glassware piece. The high end holds complete connector kits and boxed mass spectrometry accessories. The quantity and completeness of what is in the listing, not brand prestige, drives the position in the band.