All categories

This listing for a 1 of 2 BD Max PCR MachineBD MAX System is intended for in vitro diagnostic (IVD)  (more)use in performing FDA cleared or approved nucleic acid testing in clinical laboratories. It is capable of automated extraction and purification of nucleic acids from multiple specimen types, as well as the automated amplification and detection of target nucleic acid sequences by fluorescence-based PCR.The BD MAX System is capable of:Independent nucleic acid extraction and purification with built in extractor.PCR amplification using thermal cycling across 24 lanesReal time detection of products of amplificationIdentification of each Sample Buffer tube by external barcode readerWork List verification by internal barcode readerFluorescence detection at up to five wavelengths, allowing multiplex reactions by Cycle threshold (Ct) call, or multiplex reactions by melt analysisQualitative, quantitative and melt sample analysisFeatures:Integrated and fully-automated extraction and thermocycling stepsProcesses and analyzes up to 24 specimens per runOn-board lysis and extraction with pre-filled reagent stripsReal-time PCR with two 24-lane microfluidic PCR readersDedicated multi-color optics including: 475/520, 530/565, 585/630, 630/665, 680/715Consistent results through standardized workflow and protocolsRapidly expanding menu and open-system options to help address emerging testing needsLess than one minute of hands on time per sampleElectrical Requirements100 to 240 V, 50/60 Hz, 10 A, 300 VA MaxDimensions:Weight250 lb.Depth28.5 in.Height 37 in.Width 29.7 in.

This listing is for a Adam Equipment Nimbus BalanceInnovative design enables a compact footprint, so (more) it occupies minimal space but retains a high level of performance. The Nimbus base is formed from a single piece of extruded aluminum, a material that provides superior temperature regulation. The single-piece construction offers greater stability, producing highly repeatable results. The weighing sensor in the Nimbus is crafted from a single block, and contains fewer parts than a traditional force motor balance. This optimized internal mechanism is fabricated using hardened materials, helping the Nimbus tolerate rigorous laboratory use. Efficiency in the mechanics, plus improved processing power of the electronics, leads to excellent performance.Capacity - 120gReadability - 0.0001gRepeatability - 0.0001gLinearity - 0.0003gMin Weight USP - 0.01gPan size - 90mm øWeighing Units - ct, custom unit, dwt, g, GN, mg, N, oz, oztStabilisation Time - 4Interface - RS-232/USBCalibration - Internal automatic calibrationDisplay - Backlit LCD with 20mm high digitsOperating Temperature - 15° to 35°C / 59° to 95°F

This listing is for a MX-S Vortex Mixer

This listing is for a LMS Cooled Incubator. The unit is in full working condition and is ready for  (more)immidate realese. Introducing the LMS Cooled Incubator, a state-of-the-art solution designed for reliable temperature control in various laboratory applications. With its robust construction and advanced features, this incubator is perfect for growth studies, tissue culture, enzymology, and sample storage. Key Features: Accurate Temperature Control: Operates within a temperature range of -10.0°C to +50.0°C, with a remarkable temperature variation of ±0.5°C under average workloads, ensuring consistent conditions for your samples. User-Friendly Digital Controls: Easy-to-read digital display and simple controls allow for effortless temperature adjustments and monitoring. Energy Efficiency: Equipped with an eco-friendly, energy-efficient control system and a hermetically sealed refrigeration system, this incubator minimizes energy consumption without compromising performance. Versatile Storage Options: The incubator features four white plastic-coated wire shelves, providing ample space for various vessels, with a shelf area of 545 x 418 mm. Technical Specifications: Capacity: 200 L Dimensions: 600 mm (W) x 1370 mm (H) x 285 mm (D) Weight: 61 kg Insulation: Foamed polyurethane for optimal thermal efficiency Voltage: 240 V, 50 Hz Certifications: ISO 9001:2008 compliant Benefits: Enhanced Stability: The P.I.D. heating and cooling system ensures a stable internal temperature, crucial for sensitive experiments. Safety Features: Includes a pre-set safety cutout and a door lock to protect your valuable samples. Customizable Options: A full range of factory-fitted optional extras is available, such as LED lighting, access portholes, alarm systems, and internal sockets for added convenience. The LMS Cooled Incubator is the ideal choice for laboratories seeking a dependable and efficient incubator that meets the rigorous demands of scientific research. Invest in precision and reliability for your experiments today!

This listing is for a Polytron PT1300D HomogeniserHandheld, volume range 0,1 to 250 ml. For dispersi (more)ng, homogenising, extractions, cell disruption, mixing, emulsifying, suspending.Volume H₂O - 0,1 - 250 mlSpeed range - 7000 - 30000 min⁻¹Speed display - DigitalMotor rating - 100WDimensions (W×D×H) - 40×45×210 mm

This listing is for a Riello Netpower UPS Uninteruptable power supply

This listing is for 1 of 2 Roche LC Carousel Centrifuge The LC Carousel Centrifuge 2.0 is an easy-to (more)-use centrifuge with a specially designed rotor that can hold one LightCycler® 2.0 Sample Carousel (for 20 µl or 100 µl capillaries) of the LightCycler® 2.0 Instrument.Type: Bentchtop centrifugeDimensions: 285 mm (H) x 315 mm (W) x 380 mm (D) (12 in W x 15 in D x 11 in H)Weight: 20.6 kg (45.4 lbs) without rotorCapacity: LightCyler® 2.0 Sample Carousel (20 μl or 100 μl) with 1 to 32 LightCycler® CapillariesOperating Time: Fixed program approximately 30 secondsSpeed: Max. 735 x gPower Source: AC 115-230 V, 50/60 Hz

This listing is for 1 of 4 DiaMed 12 SII ID-CentrifugesThe centrifuge of the brand Diamed type 12SII (more) is designed to separate different components in a sample. This centrifuge is suitable for centrifuging samples in up to 12 ID cards. The Diamed type 12SII has a wide range of applications, including research and routine laboratories in life sciences, industry, clinics and chemistry.

This listing is for a Thermo Electron Corporation CR 4i Refrigerated CentrifugeSpecifications Capaci (more)ty:Swing-out rotor: (4 x 750 mL) 3000 mLFixed angle rotor: (8 x100 mL) 800 mLMaximum load: 3.6 kgSpeed range: 500 to 7800 rpmRCF range: 20 to 9900 x gTemperature range: -9°C to 40°CDimensions (H x W x D): 45 x 85 x 66 cm (16.5″ x 33.5″ x 26″)Weight: 106 kg (233 lbs)Electrical: 120V, 60 Hz

This listing is for a Stuart UC152 Hotplate StirrerGeneral purpose, reliable stirrer/hotplates with  (more)compact 150X150mm top plate. These units have microprocessor control of temperature allowing a calibrated scale to be printed around the control dial in °C. With a choice of robust aluminium or chemically resistant ceramic tops and advanced saftey features: Flashing 'hot' warning light to warm when top plate is too hot to touch. Spillproof design to deflect spills away from the controls abd the user. Independent saftey circuit to protect against overheating. Microprocessor control for accurate temperature setting. The 'hot' warning light will flash whenever the plate temperature is above 50°C and will operate even when the hotplate is turned off and connected to the mains. Powerful magnets and motor give stirring speeds up to 2000rpm and is capable of mixing large volumes (up to 15 litres). Model UC152 has a glass ceramic top which has excellent chemical resistance and allows high plate temperatures for faster heating. Max temp: 450°C

This listing is for a Erlab Captair Flex M321 Fume Cabinet. The unit is in full working condition a (more)nd is ready for immidate realese. Ensure the safety of your laboratory personnel with the Erlab Captair Flex M321 Fume Cabinet, a cutting-edge ductless fume hood designed to protect against hazardous chemical exposure. Engineered with Erlab’s advanced filtration technology, this fume cabinet is perfect for laboratories requiring high-efficiency filtration without the need for ductwork. Key Features: Modular Filtration Column: The Captair Flex M321 features a unique modular filtration system that combines HEPA or ULPA filters with high-performance activated carbon molecular filters, delivering unparalleled filtration quality for various chemical hazards. Smart Technology: Equipped with real-time monitoring capabilities, the fume cabinet provides notifications regarding hood operation and filter status, ensuring optimal performance and safety. Safety Standards Compliance: Meets AFNOR NFX 15 211/ANSI Z9.5-2012 filtration efficiency standards (class 1 and 2), guaranteeing reliable protection against solvents, acids, and formaldehyde. Technical Specifications: External Dimensions: 30”W x 24 3/8”D x 43 ¾” (min) to 50 5/8” (max)H Air Face Velocity: Adjustable between 0.4 to 0.6 m/s (79 fpm to 118 fpm) Filter Breakthrough Detection: Sensors monitor filter saturation, with a backup filter for added safety. Benefits: Flexible Placement: The ductless design eliminates the need for complex ductwork, allowing for easy installation and relocation within your laboratory. Enhanced Safety: Advanced filtration technology ensures superior protection for laboratory personnel, reducing the risk of inhalation exposure to harmful chemicals. Customizable Options: Tailor the filtration system to meet specific laboratory needs, ensuring optimal safety and efficiency for various applications. The Erlab Captair Flex M321 Fume Cabinet is your ideal solution for a safe and efficient laboratory environment. Experience the perfect combination of advanced technology, flexibility, and superior protection today!

This listing is for a Star Lab C1000-STR-230EU Plate Centrifuge. The unit is in full working condit (more)ion and is ready for immidate realese. The plate centrifuge makes the safe and quick spin down of droplets and condensation very easy. Sealed plates are loaded vertically and surface tension keeps samples in place so there is no danger of spilling samples. The centrifuge accepts all plates up to 25 mm high. An optional adaptor is available for centrifuging 48-well PCR plates and 0.2 ml PCR tubes or strips. Less than quarter the size of most plate centrifuges Accommodates two plates Rapid start to stop Use before and after thermal cycling to increase PCR yield Accepts skirted, semi-skirted and non-skirted plates Easy cleaning and maintenance Rotor capacity: Two plates, any style, up to 25 mm high Power supply: 230 V, 50/60 Hz Permissible Relative Humidity: < 85% Dimensions (W × D × H) 190 mm × 210 mm × 193 mm

This listing is for a QuattroFlow QF150 Diaphragm Pump. The unit is in full working condition and i (more)s ready for immidate realese. The Quattroflow 150S is a 4-piston Diaphragm pump, which is mainly used to pump water-like fluids that are typically handled in research-, pilot plant- or production facilities of the pharmaceutical, biotech, food or cosmetic research centers or plants. Examples: • Solutions containing proteins (albumin, IgG, Clotting factors, monoclonal antibodies, enzymes, vaccines.) • Solutions of polymers or suspensions (silicon, latex, chromatography media) • Cell suspensions (bacteria, yeast, algae, fungi, mammalian cells) • colloidal solutions • Suspensions of viruses or phage • Dairy products • Gelatine • Supplements and ingredients for cosmetic and food Flow rate max.: Eccentric shaft 3° l/h (lpm) 100 (1.67) 100 (1.67) Eccentric shaft 5° l/h (lpm) 180 (3) 180 (3) Flow rate min.: Eccentric shaft 3° l/h (lpm) 1 (0.017) 1 (0.017) Eccentric shaft 5° l/h (lpm) 1 (0.017) 1 (0.017) Pressure: Temperature of fluid < 40°C bar (psi) 6 (87) 6 (87) Temperature of fluid > 40°C bar (psi) 4 (58) 4 (58) Temperature max.: Fluid °C (°F) 80 (176) 80 (176) CIP °C (°F) 90 (194) 90 (194) SIP °C (°F) 130 (260) 130 (260) Autoclave °C (°F) 130 (260) 130 (260) Suction lift dry at: 3000 rpm 3000 rpm Eccentric shaft 3° m (ft) 1-1,5 (3.2-4.9) 1-1,5 (3.2-4.9) Eccentric shaft 5° m (ft) 2-3 (6.6-9.8) 2-3 (6.6-9.8) Volume specifications: Approximated volume per revolution at free output ml 0,72 (3°) 1,2 (5°) 0,72 (3°) 1,2 (5°) Filling volume without connectors ml 15 15 Residual volume (after idle with highspeed motor) ml 1-3 1-3 Product wetted surface (approx.) cm² (inch²) 112 (17) 112 (17) Speed range pump rpm 10-3000 10-3000 Connection specification inlet (standard) Connector " 1/4" TC 1/4" TC Flange diameter mm (inch) 25 25 Internal diameter mm (inch) 4,7 4,7 Connection specification outlet (standard) Connector " 1/4" TC 1/4" TC Flange diameter mm 25 25 Internal diameter mm (inch) 4,7 (0.19) 4,7 (0.19) Position of connectors Inline Inline Number of flow directions 4 4 Diameter drive shaft mm 7 7 Product wetted materials (standard): Pump housing SS316L SS316L Valve plate SS316L SS316L Diaphragms Santoprene Santoprene Valves EPDM EPDM O-rings EPDM EPDM Non-product wetted materials (standard): Pump housing SS316L SS316L Bearing housing SS316L SS316L Base plate SS316 SS316 Hood SS316 SS316 Dimensions pump with motor and housing: Length mm (inch) 257 (10,2) 277 (10-91) Width mm (inch) 164 (6,5) 200 (7,87) Height mm (inch) 185 (7,2) 195 (7,67) Weight pump with motor and housing kg (lb) 9,8 (22) 11,2 (25) IP protection class pump IP 54 54 Operating temperature range °C (°F) 0…40 (32…104) 10…30 (50…86)

This listing is for a KNF Laboport N 840.3 FT.18 Diaphragm Vacuum Pump.The unit is in full working c (more)ondition and is ready for immidate realese.Chemically resistant, dry running diaphragm pumps for a wide range of laboratory applications. They transfer and evacuate without affecting the media, i.e. media remains uncontaminated.100% oil-free displacement, so media cannot be contaminated by transfer, evacuation or compressionHigh resistance to vapours and condensatesChemically resistant, suitable for use with very aggressive and corrosive gases and vapoursMaintenance-free, environmentally friendly; the pumps use no water and so produce no contaminated waste waterApplication: Fluid aspiration, degassing, gel drying, rotary evaporation, centrifugal concentration, distillation.Includes diaphragm with patented tension optimisation, which allows the pump size to be smaller and extends the service life of the diaphragm. All parts that come into contact with the media are comprised of chemically resistant fluorinated plastics.

This listig is for a Hettich Rotina 420 CentrifugeThe Hettich ROTINA 420/ ROTINA 420R is a high perf (more)ormance benchtop centrifuge for large volumes, yet not overly large in size. The new, compact, 2-liter bench top centrifuges are for high sample throughput as well as for high sample volumes.

This listing is for a VWR VMS-C10 S2 Magnetic Hotplate Stirrer. The unit is in full working conditi (more)on and is ready for immidate realese. Compact stirrers with a ceramic glass plate provide excellent chemical resistance. Units feature digital error code display, a ‘hot’ top indicator to warn users that surface is hot, a fixed safety circuit that shuts off the heater if temperature rises above 550 °C, and three operating modes to choose from (standard, safe and adjustment protection). Stirrers have a speed display scale and optional capability to connect directly to a PT1000 temperature sensor; when using this functionality, control accuracy in the medium is ±0,5 °C. Features: Exact temperature setting via digital potentiometer Simultaneous digital display of target and actual temperatures via LCD display Display of actual temperature value in medium with 0,1 °C resolution when using PT1000 temperature sensor Stirrer can be controlled using two microcontrollers Specifications: Model VMS-C10 Advanced Max. stirring capacity H₂O (l) 15 Speed range (min-1) 100 – 1500 Temperature range (°C) 50…500 Heat output (W) 1500 Power input/output (W) 15/1,5 Plate material Glass-ceramic Plate dimensions (mm) 260×260 W×D×H (mm) 300×415×105 Weight (kg) 6

This listing is for a Eppendorf 5702R Refrigerated Centrifuge The range of Eppendorf 5702 general p (more)urpose, low-speed centrifuges has been designed specifically to meet the needs of mid-throughput clinical research and cell culture laboratories. These centrifuges are very compact, so that they fit easily on the lab bench, as well as extremely quiet.

This listing is for 1 of 2 DiaMed 37 SI ID-IncubatorsThe ID incubator of the DiaMed type 37SI is ide (more)al for bringing different samples in ID cards to a temperature of 37 °C.

This listing is for a Genlab MINI/50/SS/F/VIS Incubator. The unit is in full working condition and  (more)is ready for immidate realese. Introducing the Genlab MINI/50/SS/F/VIS Incubator, a state-of-the-art solution engineered for precision and reliability in laboratory environments. This incubator is designed for a wide array of applications, including microbiology, cell culture, and biochemical research, making it an indispensable tool for scientists and researchers. Key Features: Stainless Steel Construction: The MINI/50/SS/F/VIS features a durable stainless steel interior, ensuring excellent resistance to corrosion and easy cleaning, which is crucial for maintaining hygiene in laboratory settings. Advanced Temperature Control: With a temperature range of 5°C to 70°C and an accuracy of ±0.25°C at 37°C, this incubator provides the stable environment needed for sensitive experiments and sample storage. Integrated Visual Display: The built-in visual display allows for real-time monitoring of temperature settings, ensuring that your samples are always in optimal conditions. User-Friendly Interface: An intuitive control panel makes setting and adjusting temperature levels straightforward, enhancing operational efficiency. Technical Specifications: Capacity: 50 liters, offering ample space for various laboratory samples. Dimensions: Compact design that fits seamlessly on laboratory benches. Power Supply: Designed for energy efficiency, helping to reduce operational costs. Benefits: Versatile Applications: Perfect for a range of laboratory processes, including enzyme reactions, bacterial culture, and sample preservation. Safety Features: Equipped with an over-temperature cut-out for added safety, protecting your valuable samples from potential damage. Easy Maintenance: Smooth surfaces and accessible design ensure that cleaning and maintenance are quick and efficient. The Genlab MINI/50/SS/F/VIS Incubator is the ideal choice for laboratories seeking a reliable, efficient, and versatile incubator. Enhance your research capabilities and ensure the integrity of your samples with this exceptional laboratory instrument today!

This listing is for a Stuart STR6 Platform Rocker. The unit is in full working condition and is rea (more)dy for immidate realese. This platform rocker is designed for gentle and controlled mixing of samples, making it suitable for various laboratory applications such as low-foaming agitation, DNA extractions, staining, and de-staining procedures. The non-slip mat ensures that flat-based vessels remain securely in place during mixing. The STR6 is supplied with a non-slip mat which holds flat based vessels securely in place during mixing.   Speed Range    10 - 70 Platform angle of tilt    1 - 7º    Platform dimensions    360 x 360 x 140mm Maximum load    5kg    Overall dimensions    360x360x140mm    Electrical supply    240V, 50Hz, 50W

This listing is for a Helmer IHB245 Blood Bank Refridgerator · i.Series™ models feature the i.Cente (more)r™ Integrated Monitoring System · Heavy-duty refrigeration system for maximum temperature uniformity and quick recovery · Bacteria-resistant powder coating · Undercounter and upright models

This listing is for a Watson Marlow 323Dz Peristaltic Pump. The unit is in full working condition a (more)nd is ready for immidate realese. The Watson Marlow 323Dz peristaltic pump is a benchtop pumping solution with advanced features and precise control. Here are some key specifications and characteristics: Robust and accurate dispensing Low maintenance design Chemically resistant ABS top and IP31 protection Membrane keypad for pump control and digital LCD display for speed indication Analog control for precise flow rate adjustment The Watson Marlow 323Dz peristaltic pump is suitable for various laboratory and process applications, including: Liquid handling and transfer Dosing and metering Biotechnology and pharmaceutical processing Chemical processing and manufacturing Control Type: Analog Enclosure Rating: IP31 Motor Speed: 3 to 400 rpm External Control: Run/Stop, direction change via contact closure or 5V TTL; Remote operation of MemoDose (hand/foot switch) Noise Level: <70 dB (A) at 1m Pump Head: 313DW Temperature Range: 40°F to 104°F (4°C to 40°C) Dimensions: 230 x 230 x 132 mm Voltage: 100/120/220/240 V

This listing is for a Brand New Leosmak LEO-010 Compact freeze dryer sold through ULMfreezedryers.co (more)mWe are stock holders in UKPrice before VAT - £7,300Are you ready to revolutionize the way you store food? The Leosmak LEO-010 Freeze Dryer is your ultimate solution for preserving the taste, texture, and nutritional value of your favourite foods. Designed for both home chefs and small businesses, this advanced freeze dryer ensures that your meals remain fresh and delicious for months, reducing waste and saving you money.What’s IncludedLEO-010 Freeze Dryer.Drainage hose with connector.1 litre of oil.Spare temperature sensor. Leosmak bag.Operating manual.Catalogue.Features 5 shelves, 5 trays, 0,7 m2 shelf area.Freeze dry 10KG fresh food per batch.GN 1/1 Stainless steel trays.Freezing and heating range: -45°C - +70°C.Short Freeze Drying Time: Our advanced technology ensures efficient and rapid freeze drying, preserving the quality of your food.100% Stainless Steel Construction: Durable, easy to clean, and designed to withstand rigorous use while maintaining hygiene.Washable Chamber: No electrical components in the chamber means easy maintenance and enhanced safety.Plug and Play Operation: Simple setup allows you to start freeze drying immediately, even in a home environment.Low Noise Operation: Designed for quiet performance, making it suitable for home use without disturbing your daily activities.Included Vacuum Pump: Comes with a high-quality vacuum pump to facilitate the freeze drying process.Fully Automatic Process: Set it and forget it! Enjoy hassle-free operation with minimal supervision.Wi-Fi Monitoring: Control and monitor your freeze dryer remotely via our Android or iOS application.Freeze drying of sweets & candies. Dimensions Freeze dryer exterior dimensions: 600mm W x 930mm D x 1070mm H.Perfect for counter top, cart, or table. Weight 157KG. Power Required power supply: 220V, 3,2 kW.Energy consumption: ~7,5 kWh/1kg/standard batch. Shipping Info Shipping dimensions: 120x80x140 cm.Gross weight: 175 kg.Maintenance Replace vacuum pump oil every 20 to 30 batches (takes about two minutes) Clean freeze dryer as needed. Warranty Min. 24 months, extendable warranty.

This listing is for 1 of 2 Watson Marlow 520S Peristaltic Pump. The unit is in full working conditi (more)on and is ready for immidate realese. Peristaltic pumps are the simplest possible pump, with no valves, seals or glands to clog or corrode. The fluid contacts only the bore of a tube, eliminating the risk of the pump contaminating the fluid, or the fluid contaminating the pump. Peristaltic pumps can operate dry without risk. Easy to install, simple to operate and inexpensive to maintain, peristaltic pumps are ideal for most fluids, including viscous, shear-sensitive, corrosive and abrasive fluids, and those containing suspended solids. Suitable for metering, dosing and dispensing applications.   520S drive offers manual control via a large-key membrane keypad: speed adjustment; run and stop; forward/reverse; "Max" key for rapid priming and purging.   Supply voltage/frequency: 100-120V/200-240V 50/60Hz Flow rates from 4 microliters/min up to 2.4 liter/min Precise 2,200:1 speed control range from 0.1 to 220 rpm in 0.1 rpm increments Large speed/flow display and easy to use tactile membrane keypad. Incorporates keypad lock Manual control and flow rate calibration MemoDose for accurate single shot dispensing

This listing is for a Bibby Scientific B212 Magnetic Hotplate Stirrer. The unit is in full working  (more)condition and is ready for immidate realese.

This listing is for 1 0f 3 Velp Scientific T.ARE Heating Magnetic Stirrer. The unit is in full work (more)ing condition and is ready for immidate realese.

This listing is for a Hettich Rotofix 32A CentrifugeA non-refrigerated general purpose centrifuge wi (more)th a large number of swing-out and angle rotors for routine laboratory applications. Features:Max RCF: 4226xgDims: 366 x 430 x 257mmMetal housing with metal lidStainless steel chamberViewing port in lidOne hand lid lockDigital control panelError displayImbalance switch offBrushless driveLarge variety of rotor and adapter optionsSpecifications:Max Capacity - 4 x 100mL, 6 x 94mLMax RCF, x g - 4,226Max RPM, rpm - 6,000Weight, kg - 23Refrigeration - Air coolingDims, w x d x h, mm - 366 x 430 x 257

This listing is for 1 of 2 Scientific Industries SI-300X MultiMagstir Magnetic Stirrer. The unit is (more) in full working condition and is ready for immidate realese. Four Position Multi Mag Stir Genie provides low to high speed stirring and editable memory profiles. Microprocessor controls offer precision and reproducibility. May be used with up to four 1 L flasks/beakers or three 1 L spinner flasks and a maximum sample weight of 10.0 Kg High and low speed range from 10-1200 rpm including reverse and interval stirring Provides low to high speed stirring and editable memory profiles Low/Medium/High power levels available for various sample viscosities Uses microprocessor control for precise and reproducible operation Manual Mode provides stir, stir reverse, and time functions Profiles Mode allows users to quickly program speed, ramp rate, stir direction, time (including pause), and power level in up to 9 distinct steps Up to 4 stirring profiles can be saved Automatic Mode recalls and executes one of up to 4 user-defined profiles Stirring Positions 4 Display LCD (2 lines by 16 characters) Wattage 460 w Height (Metric) 48 mm Length (Metric) 375 mm Width (Metric) 325 mm