Radwag High Resolution Platforms PL.2000.HRP.EX.H

This item has just arrived in our stock. Please enquire for further details.

Eppendorf 8 x 5ml Adapters, Cat. # 5804793005 The Eppendorf 8 x 5ml Adapters, Cat. # 5804793005 are  (more)for use with the Eppendorf S-4-72 Swing Bucket Rotor for the Eppendorf 5804/R and 5810/R Centrifuges. These adapters feature a capacity for 8 x 5ml conical bottom Eppendorf Tubes each with the maximum tube dimensions (Diameter x Height) of 17mm x 60mm. This is a two piece set, and the adapters are new in packaging. INCLUDED: The Eppendorf 8 x 5ml Adapters, Cat. # 5804793005 includes: - Set of 2 Adapters - Full 6 Month Parts and Labor Warranty Eppendorf 8 x 5ml Adapters, Cat. # 5804793005 SpecificationsBottom ShapeConicalRotor CompatibilityEppendorf S-4-72 Swing Bucket Rotor

Labconco CentriVap Proteomic SystemVacuum concentrator: Uses centrifugal force, vacuum and contr (more)olled temperature from -4C upto +100C Sensor that reads internal chamber temperature Vacuum port with quick disconnect fitting for 0.25 in. ID tubing Has quick-stop system, control panel and glass lid DNA rotor accommodates up to 60 each 1.5 ml and 72 each 0.5 ml microcentrifuge tubes Cold trap: CFC/HCFC-free refrigeration system with 1/3 hp compressor Reaches -50C (-58F) for solvent recovery and to protect the vacuum pump by trapping moisture, vapors and corrosive fumes as they evaporate from the samples Temperature graph that illuminates green when the collector coil reaches operating temperature of -40C 4-liter stainless steel collector Acrylic lid with two Quick-Disconnect fittings INCLUDED: The Labconco 7989600 CentriVap Proteomic System, 115V, 60Hz includes: - Refrigerated Benchtop Vacuum Concentrator w/ Glass Lid - Cold Trap -50°C - DNA Rotor - Vacuum Tubing - Clamps x 6 - Power Cord - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Polyscience P40N7A101B IP-35 Immersion Probe Cooler, 3 Rigid Coil Probe, -35 to +40C, 120V, 60Hz3D V (more)isualization of the Polyscience Immersion Probe CoolerThe rendered image can be freely rotated in a full 360-degree view, allowing you to zoom in, pause, and explore every angle. For enhanced detail, the rendering can also be displayed in full-screen mode. This 3D model is designed exclusively for visualization purposes and may not accurately represent the actual appearance of your product. Your browser does not support iframes. .rendering-block:nth-child(2) { width: 292px;} PolyScience Low Temperature Coolers enhance and simplify low-temperature laboratory work, providing rapid, low-cost cooling of liquids to temperatures as low as -100C. Typical applications include the cooling of exothermic reactions, vapor and solvent trapping, and impact testing. They’re also ideal for extending the temperature range of non-refrigerated circulators to below ambient and boosting the cooling capacity of refrigerated circulators. Enhance and simplify your low-temperature laboratory work with a PolyScience Low Temperature Cooler. Available in both immersion probe and flow-through styles, they provide rapid, low-cost cooling of liquids to temperatures as low as -100C. Typical applications include the cooling of exothermic reactions, freeze point determinations, freeze drying, impact testing, lyphilization, and vapor and solvent trapping. Features Continuous cooling to temperatures as low as -100C Designed to run at maximum cooling An economical alternative to dry ice or liquid nitrogen Excellent for trapping applications, freeze drying, and rapidly cooling small volumes of liquids INCLUDED: The Polyscience P40N7A101B IP-35 Immersion Probe Cooler, -35°C to 40°C, 1081W; 120V includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

voltage and current adjustable with digital reading.

This listing is for a Grifols DG Therm IncubatorThe DG Therm is a digital incubator designed for eff (more)icient gel card processing. It can hold up to 24 DG Gel cards and 24 test tubes across two independent incubation zones. The on-screen display shows the remaining incubation time and temperature, and it features a programmable alarm and removable trash bin.

Dell Optiplex with Heidolph Hei-Control-Software This was removed from a university lab where it wa (more)s surplus to requirements. The unit powers up and is in god working order. It is in good cosmetic condition with marks from use.

Ohaus SHRK07AL1 Rocking Shaker, 1 TierThe OhausSHRK07AL1 Analog Tier 1 Rocking Shaker is an easy and (more) economical option for allof your rocking needs. The Rocking Shaker is ideal for cell culture andblotting applications and is designed to be used in a variety of environmentalconditions. Rocker is supplied with an 14 x 11" (35.6 x 27.9 cm) non-skidrubber mat. The SHRK07AL1is designed for use in a range of lab applications in a variety ofenvironmental conditions. Rocking Shakers provide a seesaw-like motion, whileWaving Shakers offer a smooth, low-foaming, 3D wave motion for precise speedcontrol. All models include a non-slip mat, and most models are available witha stacking tray option. Microprocessorcontrol allows for independent control knobs for tilt, speed and time (analogmodels).Timer displays elapsed time or when programmed to a set time, will turn off when timereaches zero. Speed ramping feature slowly increases speed to desired setpoint to avoid splashing.Audible/visual signals activate when the system detects an obstruction or trayoverload. INCLUDED: The Ohaus SHRK07AL1 Rocking Shaker, 1 Tier includes: - Non-Skid Rubber Mat - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

F1 Mass Standard - monoblock weights without adjustment chamber. Nominal value - 2 g.

MWMH series modules are not offered or distributed in the following countries: Germany, Switzerland, (more) Italy, Japan and the USA. Vast Max Capacity Range Magnetoelectric weighing modules MWMH are intended for mass measurement ranging from 1kg to 10kg. Minimum readability of 0.01g guarantees amazing accuracy for your measurement. Protection Against Challenging Conditions Hermetic versions of modules feature stainless steel housing with IP65 and IP69K. This allows operation even in the most challenging conditions. Mechanical design lacks sharp edges and gaps which ensures adherence to HACCP, GMP and FDA standards for safety and quality of operation. Fast and Precise Measurement High measurement accuracy with sd=1d* guarantees both readout of real weighing results and repeatability of indications. Cutting-edge design solutions provide fast measurement which is an asset allowing to install the module on automated production lines. Intended for fast and dynamic measuring processes the weighing module’s converter throughput is 3200 meas./s. Cooperation with terminals Connecting the module to a multifunctional weighing terminal expands communication interfaces range and increases usage in industrial applications. Mechanical design versions: MWMH xxx - 1 - model with Binder connectors (IP65), MWMH xxx - 2 - model with Binder connectors, (IP65), power supply and control of the transporter on a weighing pan, MWMH xxx - 3 - model with cable glands, (IP 69K), MWMH xxx - 4 - model with cable glands (IP69K), power supply and control of the transporter on a weighing pan MWMH xxx - TWD - model with cable glands (IP 69K).