Radwag PL/4N/600/H3.LD Platform

Frame intended for 4-load-cell powder-coated scales C10, that are to be embedded in the ground.

DP-5 Additional weighing platform module for MW-04 Expand the capabilities of your terminal Enhance  (more)the functionality of your weighing system with the DP-5 module from RADWAG, a leader in precision weighing innovations. This advanced module allows for the easy and convenient connection of an additional weighing platform to your terminal, enabling more comprehensive analysis and faster data processing.

The analog output module converts the scale output signal (mass) into an analog signal. The mass val (more)ue is most often represented in the form of a 4-20 mA current signal. Due to the low resolution of the module (several thousand), such a signal is used in automation for processes that do not require high precision. Analog output module is available in: IM01.EX-2 communication module and MW01-A7 weighing module, and for an extra charge in PUE H315 terminals.

Additional LCD display in plastic housing and on a stand. The display enables presentation of the we (more)ighing result in a place distant from the balance workplace. It features an additional information line which allows to display additional messages and data.

Mild steel powder coated weighing platform We provide you with mild steel powder coated weighing pla (more)tforms with readability [d] from 1 g to 100 g and maximum capacity [Max] from 3 kg to 300 kg. The platforms have a square shape of 300 x 300 mm or a rectangular shape of 400 x 500 mm or 500 x 700 mm. Use the potential Our platforms can work with one of eight weighing terminals to choose from: PUE CY10, PUE H315, PUE C315, PUE C32, PUE 7.1, PUE HX7, PUE HY10 and PUE 5. Power of steel The use of stainless steel for the pan guarantees you a long life of the platform. Fearless of its contact with moist objects or accidental splashing. The frame is made of mild steel. Mild steel powder coated weighing platforms are marked by a high degree of protection IP 65.

Four load cell stainless steel platforms The frame for recessing (foundation) is part of the set &nd (more)ash; you will receive it with the ordered platform.

This listing is for the Becton Dickinson FACSCalibur Flow Cytometer. It is being sold as the unit on (more) its own without cables or software, it needs its laser replaced, otherwise it is in full working condition.The Becton Dickinson FACSCalibur Flow Cytometer offers aunique approach to flow cytometry, allowing users to perform both cell analysisand cell sorting in a single system, providing flexibility for a variety ofresearch and clinical applications. The BD FACSCalibur is a fully integratedmultiparameter system that has the performance and sensitivity to ensureobjective and reproducible results through the use of dual-laser technology,interbeam compensation, and an alignment-free optical design. Efficientcollection optics, coupled to the flow cell with an optical gel, permit the useof a low-powered, air-cooled argon laser and a red diode laser to ensure thehigh sensitivity required for analysis of low-density antigens.

The certified intrinsically safe PM01.EX power supply, manufactured by RADWAG, has been designed to  (more)power the HX5.EX indicator. PM01.EX power supply comes in two designs: PM01.EX-1: power supply intended for operation in hazardous area: Zone 1 and 2, where there is a risk of explosion due to mixture of air with vapour, mist or gas, classified as explosion group IIC, IIB and IIA and as temperature class T1, T2, T3, T4. Zone 21 and 22, where there is a risk of explosion due to mixture of air with dust, flammable fibres and volatile fuels, classified as explosion group IIIC, IIIB and IIIA. PM01.EX-2: power supply intended for operation outside hazardous area, equipped with intrinsically safe circuits that can be placed in: Zone 1 and 2, where there is a risk of explosion due to mixture of air with vapour, mist or gas, classified as explosion group IIC, IIB and IIA and as temperature class T1, T2, T3, T4. Zone 21 and 22, where there is a risk of explosion due to mixture of air with dust, flammable fibres and volatile fuels, classified as explosion group IIIC, IIIB and IIIA. The certified intrinsically safe PM02.EX power supply, manufactured by RADWAG, has been designed to power the HRP.EX. PM02.EX power supply comes in two designs: PM02.EX-1-2: power supply intended for operation in hazardous area: Zone 1 and 2, where there is a risk of explosion due to mixture of air with vapour, mist or gas, classified as explosion group IIC, IIB and IIA and as temperature class T1, T2, T3, T4. Zone 21 and 22, where there is a risk of explosion due to mixture of air with dust, flammable fibres and volatile fuels, classified as explosion group IIIC, IIIB and IIIA. PM02.EX-2-2: power supply intended for operation outside hazardous area, equipped with intrinsically safe circuits that can be placed in: Zone 1 and 2, where there is a risk of explosion due to mixture of air with vapour, mist or gas, classified as explosion group IIC, IIB and IIA and as temperature class T1, T2, T3, T4. Zone 21 and 22, where there is a risk of explosion due to mixture of air with dust, flammable fibres and volatile fuels, classified as explosion group IIIC, IIIB and IIIA.

IKA RV 3 V Rotary Evaporator Features - Locking mechanism: red indicator shows unlocked position of  (more)vapor tube - Adjustable immersion angle - Stepless speed setting with dial control and analog speed display - Speed range of 20 to 300 RPM - Low device voltage (24V) ensures user safety - Compatible with the entire range of IKA RV 10 glassware 4L heating bath for temperatures up to 99°C with a digital temperature display and carrying handles Integrated push-off mechanism to loosen tightly fitting or stuck glassware for easy flask exchange Mechanical lift for precise positioning of the glassware, suitable for left or right handed operators and equipped with an end-point safety stop The new RV 3 Rotary Evaporator is the ideal entry-levelmodel of the IKA rotary evaporator portfolio. It finds a multitude of uses inthe chemical, pharmaceutical, and biotechnology industries, in research anddevelopment, in manufacturing and quality assurance, in laboratories, and inplant construction. Thanks to specially designed glass guides, the condensermakes extremely efficient use of the 1500 cm² cooling surface. INCLUDED The IKA RV 3 V Rotary Evaporator includes: - RV 3 ECO - HB eco S099 Heating Bath - RV 10.900 Glassware vertical - RV 10.73 Vapor tube (NS 24/40) - RV 10.8001 Seal - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer Warranty (+ Additional Free 3 Year Warranty Extension with IKA Registration) IKA RV 3 V Rotary Evaporator SpecificationsType of cooling verticalCooling surface 1500 cm2Motor principle DCSpeed range20 - 300 rpmSpeed tolerance set rotation speed < 100rpm1 ±rpmSpeed tolerance set rotation speed 100rpm1 ±%LiftmanualStroke150 mmHeating temperature rangeroom temp. - 99 °CDimensions (W x H x D)440 x 530 x 330 mmWeight28.3 kgPermissible ambient temperature5 - 40 °CPermissible relative humidity80 %Protection class according to DIN EN 60529IP 20Voltage100 - 240 VFrequency50/60 HzPower input1400 WComparison of ModelsSpecificationRV 10 Auto Pro V FlexRV 10 Auto VRV 10 Digital VRV 3 VRV 8 VType of CoolingVertical CondenserVertical CondenserVerticalVerticalVerticalSpeed Range5 - 300 rpm5 - 300 rpm5 - 280 rpm20 - 300 rpm5 - 300 rpmLiftMotorMotorMotorManualManualStroke140 mm140 mm140 mm150 mm120 mmHeating Temperature RangeRoom Temp. - 180 °CRoom Temp. - 180 °CRoom Temp. - 180 °CRoom Temp. - 99 °CRoom Temp. - 180 °CTimerYesYesYesN/AN/ADimensions (W x H x D)500 x 430 x 440 mm500 x 430 x 440 mm500 x 430 x 440 mm440 x 530 x 330 mm510 x 490 x 345 mmWeight52.34 kg34.96 kg32.36 kg28.3 kg25.76 kgRS 232 InterfaceYesYesYesN/AN/AUSB InterfaceYesYesYesN/AN/AVoltage100 - 240 V100 - 240 V220 - 240 / 115 / 100 - 240 / 100 - 120 / 100 - 115 V100 - 240 V100 - 240 V.comparison-table tr td:nth-child(5) { background-color: #fffacd; }

Temperature range: 3°C to 16°C Maximum fluctuation: 3.6 °C Maximum gradient: 4.1 °C Defrosting syste (more)m: Automatic defrosting system Cooling system: Dynamic Capacity: 336 L Dimensions (HxWxD): 1840 x 597 x 615 mm Internal dimensions (HxWxD): 1635 x 440 x 435 mm Weight: 65 kg