Rarecells Diagnostics Device Ref - 0584-0200A Lab

Wyatt Mini Dawn Treos WTREOS-08 Laser Photometer Model WTREOS-08 Untested equipment

Genapta Laser Enable and Disbale Units & Single Photon Counting Box This system was removed from (more) a university lab where it was surplus to requirements. All the units power on but we were unable to test any further. They are in a reasonable used cosmetic condition with marks from use.

This Rarecells Diagnostics Device was removed from a laboratory where it was surplus to requirements (more). The item powers on and is in a reasonable used cosmetic condition. We were unable to test it at our facility. It requires a 24v 5-pin power supply (not included).

Showa Optronics Co Laser System With Olympus FV10-COMB This system was removed from a university lab (more) where it was surplus to requirements. The system powers up but has not been tested further for safety reasons. Included are the following; Olympus FV10-COMB Showa Optronics Co GLS3135 LaserShowa Optronics Co GLS3135 PSU Showa Optronics Co GLG7000Melles Griot 05-LHP-991

Technical features Flow rate 0.5–3.0 l / min Suction (max.) 3 mWg Operating pressure (max.) 4 bar (r (more)el.) Permitted fluid temperature 5-80°C Maximum permissible viscosity 150 cSt FFKM valve material Membrane material PTFE coating Pump head material PTFE, PP, PVDF Applications Transfer of liquids Qualitative characteristics Small footprint Simple and intuitive use Manual control Self-priming, it can run dry Splash-proof with IP65 protection rating Available with different material configurations for chemical resistance Maintenance free Pump head materials: PP, PVDF, PTFE Membrane material: PTFE coating Valve material: FFKM Simriz® VERSIONS S (standard): the flow rate can only be set manually, using the knob on the upper side, as shown in the photo. RC (remote control): the range can be controlled remotely, such as from a PC, including a fault alarm; a connection cable will be supplied. Supplied with fittings for 12 mm internal diameter tube. Download the data sheet for further information and accessories. NOT SURE WHICH VACUUM PUMP YOU NEED? Try following our guide to KNF pumps: VACUUM PUMPS FOR THE LABORATORY Or download the KNF guide: THE IDEAL DIAPHRAGM PUMP FOR EVERY APPLICATION

CLIMATE CHAMBERS KK SMART PRO POL-EKO KK - RELIABLE AND HIGHLY CUSTOMIZABLE Built and designed witho (more)ut compromise, they are successfully used in medical, biotechnological, chemical and industrial laboratories. An important application is pharmaceutical stability testing according to ICH Q1A (R2) - (CPMP/ICH/2736/99). They maintain a constant temperature from 0°C to 60°C and thanks to an ultrasonic humidifier, they regulate humidity from 30% up to 90%. They are equipped with the most advanced POL-EKO control panel: the Smart PRO touchscreen. Large 7' display, WiFi for communication and data transfer, programming, alarms, internal memory for recording and overview of data in graphic form and much more, including standard software for complete management via PC. Continue reading and discover all the other surprising features of these climatic chambers! ABSOLUTE CONTROL The SMART control panel is among the most complete you can find on the market. Large symbols and temperature values ​​guarantee comfortable and clear reading, combined with disarming ease of use. The latest generation touch screen responds to commands even if touched with latex gloves and is equipped with a large display: all values ​​are perfectly readable from any angle, regardless of the intensity of the light. Thanks to SMART PRO you will be able to have possibilities that you didn't have before. Cutting-edge functions and freedom of transfer and remote use, thanks to LabDesk software. You can find all the features of the SMART PRO panel in our dedicated post: insights on SMART and SMART PRO. DO YOU KNOW THE ADVANTAGES OF AN ADVANCED CONTROLLER LIKE THE SMART PRO PANEL? - Sharp 7' color touch screen - LAN, USB and WiFi ports for communication and data transfer - Fast, multi-segment, time and temperature programming - Adjustable ramps - Recording of the minimum, average and maximum temperature value for each segment - Visual and audible alarms with colored bar on display - Internal memory for programs and data storage - Fan speed control 0...100% or 10%...100% (depending on chamber capacity) - User manual downloadable directly from the controller - Loop function up to 255 times or infinite - Temperature sensor failure alarm - Event log with user notifications - Controls can be managed even when wearing latex gloves - Overview of the set and current parameters during operation in tabular and graphical form - Operation in temperature or time priority mode - Ability to create user accounts with assignment of rights and passwords - Memory of 40 user programs - Data log – 10,000 data records for each user, ability to view data on screen in tabular or graphical form - Direct data download via USB port - Event log QUALITY FIRST Resistant. Durable. POL-EKO climatic chambers are designed and built to guarantee the best performance. They are a smart purchase, for customers who want to invest in the future of their laboratory. By choosing these products you will have precise results for years and years, repeatable and in complete comfort. The climatic chambers of the KK Smart series are builded with the best materials and equipped with the most important accessories, to give you a complete and ready-to-use standard product. - Insulated door with lock - Internal glass door - Interior made of acid-resistant stainless steel according to DIN 1.4301 - Stainless steel grill shelf (INOX) - Overtemperature protection class 3.3 according to DIN 12880 - Castors - Quality control protocol (at +25°C and 60%rH) - Automatic defrost function - USB port, LAN (with cable) and Wi-Fi connection - Lab desk software - External probe insertion hole diam. 30mm to the left - Deionized water tank - Open door alarm - Available with FIT: phytosystem – day and night simulation with intensity control. To find out more, download our informative pdf: The photoperiodic (FOT) and phytotron (FIT) systems by POL-EKO. NOTE: the temperature range that can be used with FIT active is +10°C... +50°C. KK SMART PRO SERIES POL-EKO offers 9 climatic chamber models with capacities from 109 to 1485 litres. Unleash your possibilities. In the image below, the graph shows the excellent working range (humidity/temperature) that the POL-EKO climatic chambers are able to offer you, with the KK series (ultrasonic humidifier) ​​and with the KKS series (steam humidifier ). ULTRASONIC HUMIDIFIER Climatic chambers with ultrasonic humidifier are professional and reliable tools to guarantee stable and precise conditions. The maximum temperature of 60°C allows it to be used for seed germination, mushroom and plant cultivation or for food testing. The perfect climatic conditions allow stability testing of pharmaceutical and cosmetic products, as well as packaging and electronics. NOTE: For the KK series, deionized water (1 μS/cm) must be used. Feed water source: deionized water tank; deionizer; internal deionized water network. DETAILS AND ACCESSORIES Every detail of your POL-EKO models is designed to make routine work as simple and comfortable as possible. Below, the front and rear view of your future ovens for drying, analysis or testing. 1 - Rating plate 2 - Fan 3 - Internal glass door 4 - Hole for ø30mm external probe 5 - Shelf 6 - Position of the condenser 7 - Wheels with lock 8 - Solid external door (optionally with window) 9 - Touch screen control panel 10 - USB port 11 - Door open sensor 1 - Container for deionized water 2 - Power cable 3 - Connectors 4 - Connectors (to a tank with demineralised water or deionizer) 5 - Service connector 6 - Connection to the drain 7 - Main switch 8 - LAN port 9 - Fuse For larger models (KK 500 / 700 / 1200 / 1450): a - Power cable b - Container for deionized water c - Condensate collection tray with pump d - Main switch e - LAN port f - Fuse Together with the climatic chamber you will also receive: OPTIONS POL-EKO allows you to increase the possibilities of your climatic chamber with quality accessories; to better adapt to particular applications or to equip the instrument with safety systems and advanced connections. In the photo, the inside of a climatic chamber with LED series Fitotrone System.. - Door with panoramic window - Perforated shelf - Reinforced shelf - Stainless steel basins - Phitotron FIT system - Internal socket - Water level sensor - IQ OQ PQ calibration and qualification - Backup battery for the display in case of power failure - Clean contact - Non-standard 20/60/100 mm access door - Additional 30 mm access door ◉ POL-EKO CUSTOMERS The SPEKTROCHEM research and development center for paints, adhesives and polymers has been a loyal POL-EKO customer for several decades. Use climatic chambers for tests on water-based raw materials prepared in the laboratory.

0

Heidolph 036110203 Hei-PLATE Mix 'n' Heat Core Hotplate Stirrer, 135mm Plate The Heidolph 036110203  (more)Hei-PLATE Mix 'n' Heat Core Hotplate Stirrer, 135mm Plate was designed with two rotary knobs to allow direct access to the two main functions. The speed and temperature are set using a scale. The maximum values are 1,400 RPM and 300°C. This magnetic stirrer is very easy to use and is equipped with the most important safety features. The large safety distance between the heating plate and the control elements, as well as the optical residual heat indicator at temperatures 50°C, protect against burns. The heating function can be activated separately and is indicated by the LED button lighting up. The patented Kera-Disk® footprint made of anodized aluminum, is chemical-resistant, scratch-proof, and has a diameter of 145 mm. This unique size makes it suitable for use with many accessories and samples on a small footprint. The material used also enables the fastest heating times. Click Here to View Product Video INCLUDED: The Heidolph 036110203 Hei-PLATE Mix 'n' Heat Core Hotplate Stirrer, 135mm Plate includes: - Power Cord - Operator's Manual - Manufacturer's Documentation - 10 Year Manufacturer's Warranty