58k+ listingsShips to NLResponse within one hour+31 73 711 4717info@questpair.com
QuestPair

ABS 4.6 Cu. Ft. Built-In Stainless Steel Left Hinged Vaccine Refrigerator NSF/ANSI 456 Certified

UsedAmerican BioTech SupplyMedical ventilatorsUnited States

From€3,437.35excl. VAT

In stock

Can't find what you're looking for?

DESCRIPTION
SINGLE STAINLESS STEEL DOOR PHARMACY/VACCINE LEFT HINGED UNDERCOUNTER REFRIGERATOR BUILT-IN
OPERATIONAL ENVIRONMENT
INDOOR USE ONLY, +18°C TO +26°C (+65°F TO +78°F), <70% RH
STORAGE CAPACITY
4.6 CU. FT. GROSS VOLUME
DOOR
ONE SWING SOLID DOOR, SELF-CLOSING, RIGHT HINGED, NON-REVERSIBLE, MAGNETIC SEALED GASKET, KEYED LOCK
SHELVES
THREE SHELVES (TWO ADJUSTABLE/ONE FIXED) WITH GUARD RAIL ON BACK
All 25 specifications
  • Ships to NL
  • Response within 1 hour
  • Warranty available. Buy without worry
  • Support from a scientist

Specifications 25

Brands
American BioTech Supply
New/Used
Used
DESCRIPTION
SINGLE STAINLESS STEEL DOOR PHARMACY/VACCINE LEFT HINGED UNDERCOUNTER REFRIGERATOR BUILT-IN
OPERATIONAL ENVIRONMENT
INDOOR USE ONLY, +18°C TO +26°C (+65°F TO +78°F), <70% RH
STORAGE CAPACITY
4.6 CU. FT. GROSS VOLUME
DOOR
ONE SWING SOLID DOOR, SELF-CLOSING, RIGHT HINGED, NON-REVERSIBLE, MAGNETIC SEALED GASKET, KEYED LOCK
SHELVES
THREE SHELVES (TWO ADJUSTABLE/ONE FIXED) WITH GUARD RAIL ON BACK
MOUNTING
LOW PROFILE ROLLER WHEELS AND LEVELING LEGS
INTERIOR LIGHTING
SHIELDED, SWITCHED LED LIGHTING, FULL COVERAGE, BALANCED SPECTRUM
AIRFLOW MANAGEMENT
FORCED AIR TECHNOLOGY, PATENT PENDING
EXTERNAL PROBE ACCESS
REAR WALL PORT (1/2") DIA.
INSULATION
CABINET IS FOAMED-IN-PLACE WITH EPA COMPLIANT HIGH DENSITY URETHANE FOAM
EXTERIOR MATERIALS
WHITE POWDER COATED STEEL
ACCESS CONTROL
PYXIS®, OMNICELL® AND ACUDOSE RX® COMPATIBLE
GENERAL WARRANTY
TWO (2) YEARS PARTS AND LABOR WARRANTY, EXCLUDING DISPLAY PROBE CALIBRATION
COMPRESSOR WARRANTY
FIVE (5) YEARS COMPRESSOR WARRANTY
EXTERIOR WIDTH
23 7/8"
EXTERIOR DEPTH
24 3/8"
EXTERIOR HEIGHT
33 3/8"
PRODUCT WEIGHT
100 LBS.
SHIPPING WEIGHT
140 LBS.
RATED AMPERAGE
1.74 AMPS
POWER PLUG/POWER CORD
NEMA 5-15 PLUG, 8 TO 10 FT TYPICAL, CONFORMS TO UL471 REQUIREMENTS, VACCINE STORAGE POWER CORD WARNING LABEL
FACILITY ELECTRICAL REQUIREMENT
110-120V AC: 15 A (MINIMUM)
AGENCY LISTING AND CERTIFICATION
CERTIFIED IN ACCORDANCE WITH THE NSF/ANSI 456 STANDARD FOR VACCINE STORAGE. UL, C-UL, ETL, C-ETL LISTED (EITHER SINGLE OR DUAL AGENCY LISTINGS) AND CERTIFIED TO UL471 STANDARD, HYDROCARBON REFRIGERANT SAFETY.

Product description

4.6 cu.ft. built-in vaccine fridge with microprocessor control, NSF/ANSI 456 certified, stainless steel door, temperature alarms.

The ABS PH-ABT-NSF-UCBI-0404SS-LH is a built-in undercounter vaccine refrigerator designed to meet NSF/ANSI 456 standards for vaccine storage. Its solid stainless steel door is left hinged with a keyed lock, featuring self-closing and magnetic sealed gasket mechanisms.

  • Storage Capacity: 4.6 cu.ft. gross volume
  • Operation Environment: Indoor use, 18°C to 26°C (65°F to 78°F), <70% RH
  • Shelving: Three shelves (two adjustable, one fixed) with guard rail
  • Mounting: Low profile roller wheels and leveling legs
  • Interior Lighting: Shielded, switched LED with balanced spectrum
  • Airflow: Patent-pending forced air technology
  • External Probe Access: Rear wall ½” diameter port with included probes
  • Insulation: Foam-in-place high-density urethane compliant with EPA standards
  • Exterior Material: White powder-coated steel
  • Power Requirements: 110–120V AC, 15A minimum, NEMA 5-15 plug, UL471 compliant power cord
  • Refrigeration System: Hermetic high-performance compressor, EPA SNAP compliant R600a isobutane refrigerant, hybrid fin and tube condenser with low noise fan, plate wall evaporator, cycle-optimized defrost with zero energy
  • Performance:
  • Temperature uniformity ±0.8°C
  • Stability ±1.2°C
  • Maximum temperature variation ±1.4°C
  • Maintains temperature 36°F to 46°F (2°C to 8°C) for vaccines
  • Temperature rise after 8 sec door opening ≤ 6.4°C
  • Recovery to under 8°C within 4.8 minutes after 3 min door opening
  • Energy consumption 1.15 kWh/day, average heat rejection 1.57 kWh/day (224 BTU/h)
  • Noise level ≤ 43 dBA
  • Pull-down time to operating temp 35 min
  • Temperature Controller: Parametric microprocessor with LED display, 0.1°C resolution, setpoint 1°C to 10°C (factory-set for compliance), stainless steel calibrated probe
  • Alarms: Visual and audible for high/low temperature per NSF/ANSI 456
  • Certifications: NSF/ANSI 456 for vaccine storage, UL, cUL, ETL, CETL listed, UL471 certified, hydrocarbon refrigerant safety certified
  • Additional Features:
  • Compatible with PYXIS®, Omnicell®, and AcuDose Rx® access control systems
  • Includes Temperature Monitor Device (TMD) with 3-year calibration certification, buffered probe, min/max memory, F/C switchable, alarm toolkit, and temperature logs
  • Dimensions & Weight:
  • Width: 23 7/8"
  • Depth: 24 3/8"
  • Height: 33 3/8"
  • Product Weight: 100 lbs
  • Shipping Weight: 140 lbs
  • Warranty:
  • Parts and labor: 2 years (excluding display probe calibration)
  • Compressor: 5 years

This refrigerator employs environmentally friendly HFC-free refrigerant and meets strict vaccine storage requirements for temperature management and reliability in clinical and research laboratory settings.

Why Questpair exists

Lab equipment markets are fragmented. Buyers spend weeks calling distributors, comparing quotes, and verifying supplier reliability. Sellers struggle to reach global research labs.

We built Questpair to fix this. Every supplier on the platform is verified before listing. Every quote you receive comes from a real, vetted seller. AI prepares your case in minutes, then a real specialist takes over.

We're an independent team based in The Netherlands, working with research labs and procurement teams across Europe and worldwide.

Frequently asked questions

How long does laboratory equipment typically last?

With a service contract, ten to fifteen years is normal for most benchtop instruments. Detectors and pumps are the parts that wear first.

Can I get service for older equipment?

Yes. Every verified supplier states which service partners cover the instrument, and we list that alongside the offer.

Where can I buy parts?

Ask a scientist through the request button. Parts are often available even when the instrument itself is discontinued.

What is the typical lead time for refurbished equipment?

Two to six weeks, depending on refurbishment scope and whether calibration is included.

Does laboratory equipment ship internationally?

We ship to 38 countries. Crating and customs handling are quoted with the instrument.

Reply in one hour

Can't find the exact configuration?

Tell us what you need and a scientist finds it for you, usually within the hour.

Last updated 19 October 2026