58k+ listingsShips to NLResponse within one hour+31 73 711 4717info@questpair.com
QuestPair

American BioTech Supply 2.5 Cu Ft NSF-Compliant Undercounter Vaccine Refrigerator PH-ABT-NSF-UCFS-0204

UsedAmerican BioTech SupplyMedical ventilatorsUnited States

€2,453.59excl. VAT

In stock

Can't find what you're looking for?

OPERATIONAL ENVIRONMENT
INDOOR USE ONLY. OPTIMAL OPERATING RANGE: +18°C TO +26°C (+65°F TO +78°F), <70% RH
STORAGE CAPACITY
2.5 CU. FT. GROSS VOLUME
DOOR
ONE SWING SOLID DOOR, SELF-CLOSING, RIGHT HINGED, NON-REVERSIBLE, MAGNETIC SEALED GASKET, KEYED LOCK
SHELVES
FOUR SHELVES (THREE ADJUSTABLE/ONE FIXED) WITH GUARD RAIL ON BACK
MOUNTING AND INSTALLATION
LEVELING LEGS. NOTE: 4" OF CLEARANCE ON ALL SIDES MUST BE MAINTAINED FOR ADEQUATE VENTILATION
All 21 specifications
  • Ships to NL
  • Response within 1 hour
  • Warranty available. Buy without worry
  • Support from a scientist

Specifications 21

Brands
American BioTech Supply
New/Used
Used
OPERATIONAL ENVIRONMENT
INDOOR USE ONLY. OPTIMAL OPERATING RANGE: +18°C TO +26°C (+65°F TO +78°F), <70% RH
STORAGE CAPACITY
2.5 CU. FT. GROSS VOLUME
DOOR
ONE SWING SOLID DOOR, SELF-CLOSING, RIGHT HINGED, NON-REVERSIBLE, MAGNETIC SEALED GASKET, KEYED LOCK
SHELVES
FOUR SHELVES (THREE ADJUSTABLE/ONE FIXED) WITH GUARD RAIL ON BACK
MOUNTING AND INSTALLATION
LEVELING LEGS. NOTE: 4" OF CLEARANCE ON ALL SIDES MUST BE MAINTAINED FOR ADEQUATE VENTILATION
INTERIOR LIGHTING
N/A
AIRFLOW MANAGEMENT
FORCED AIR TECHNOLOGY, PATENT PENDING
EXTERNAL PROBE ACCESS
REAR WALL PORT (3/8") DIA.
INSULATION
CABINET IS FOAMED-IN-PLACE WITH EPA COMPLIANT HIGH DENSITY URETHANE FOAM
EXTERIOR MATERIALS
WHITE POWDER COATED STEEL
ACCESS CONTROL
PYXIS®, OMNICELL® AND ACUDOSE RX® COMPATIBLE
GENERAL WARRANTY
TWO (2) YEARS PARTS AND LABOR WARRANTY, EXCLUDING DISPLAY PROBE CALIBRATION
COMPRESSOR WARRANTY
FIVE (5) YEARS COMPRESSOR WARRANTY
PRODUCT WEIGHT
69 LBS.
SHIPPING WEIGHT
88 LBS.
RATED AMPERAGE
0.9 A MAX
POWER PLUG/POWER CORD
NEMA 5-15 PLUG, 8 TO 10 FT TYPICAL, CONFORMS TO UL471 REQUIREMENTS, VACCINE STORAGE POWER CORD WARNING LABEL
FACILITY ELECTRICAL REQUIREMENT
110-120V AC: 15 A (MINIMUM)
AGENCY LISTING AND CERTIFICATION
CERTIFIED IN ACCORDANCE WITH THE NSF/ANSI 456 STANDARD FOR VACCINE STORAGE. UL, C-UL, ETL, C-ETL LISTED (EITHER SINGLE OR DUAL AGENCY LISTINGS) AND CERTIFIED TO UL471 STANDARD, HYDROCARBON REFRIGERANT SAFETY.

Product description

2.5 cu ft vaccine refrigerator with microprocessor control, NSF 456 compliance, and HFC-free refrigerant.

Specifications:

  • Storage Capacity: 2.5 cubic feet gross volume
  • Operational Environment: Indoor use only; optimal range +18°C to +26°C (+65°F to +78°F), <70% RH
  • Door: One self-closing solid door, right hinged, non-reversible, magnetic gasket, keyed lock
  • Shelves: Four total (three adjustable, one fixed) with guard rails on back
  • Mounting: Leveling legs; 4" clearance on all sides for ventilation required
  • Lighting: Not applicable
  • Airflow: Forced air technology (patent pending)
  • Probe Access: External 3/8" rear wall port with included probes
  • Insulation: Foam-in-place high-density urethane foam compliant with EPA standards
  • Exterior: White powder-coated steel
  • Access Control: Compatible with PYXIS®, Omnicell®, Acudose RX® systems
  • Warranty: 2 years parts and labor; 5 years compressor
  • Weight: 69 lbs product; 88 lbs shipping
  • Electrical: 110-120V AC, 15A minimum; NEMA 5-15 plug; UL471 compliant power cord with warning label
  • Certifications: NSF/ANSI 456 (Vaccine Storage), UL, C-UL, ETL, C-ETL listings; compliant with Hydrocarbon Refrigerant Safety standards

Performance Data:

  • Temperature Range: Refrigerator 2°C to 8°C (36°F to 46°F), freezer -50°C to -15°C (-58°F to 5°F)
  • Uniformity: ±1.1°C max variance across probes
  • Stability: ±0.7°C max variance per probe
  • Variation: ±1.2°C
  • Recovery: Returns to under 8°C within 7.5 minutes after door opening
  • Temperature Rise: Max 7.2°C after 8-second door opening
  • Energy Consumption: 0.58 kWh/day
  • Heat Rejection: 1.00 kWh/day (142 BTU/hr)
  • Noise Level: ≤34 dBA installed
  • Pull-down Time: 42 minutes to nominal temperature

Temperature Controller:

  • Parametric microprocessor with LED display, 0.1°C resolution
  • Factory set temperature range 1°C to 10°C (unaltered for NSF compliance)
  • Calibrated stainless steel display probe
  • Remote alarm contacts support state switching
  • Alarms: High/low temperature alarms compliant with NSF/ANSI 456
  • Simulator ballast uses glass bead thermal media

Additional Features:

  • Uses environmentally friendly HFC-free refrigerant
  • Includes a Temperature Monitor Device (TMD) with 3-year calibration certification, buffered probe in simulated solution, min/max memory, field installable, visual and audible alarms

Shipping Options:

  • Multiple freight options including dock-to-dock, liftgate delivery, threshold delivery, and inside delivery with setup assistance

This refrigerator meets all relevant vaccine storage standards, providing precise temperature control and monitoring critical for pharmaceutical and research applications.

Why Questpair exists

Lab equipment markets are fragmented. Buyers spend weeks calling distributors, comparing quotes, and verifying supplier reliability. Sellers struggle to reach global research labs.

We built Questpair to fix this. Every supplier on the platform is verified before listing. Every quote you receive comes from a real, vetted seller. AI prepares your case in minutes, then a real specialist takes over.

We're an independent team based in The Netherlands, working with research labs and procurement teams across Europe and worldwide.

Frequently asked questions

How long does laboratory equipment typically last?

With a service contract, ten to fifteen years is normal for most benchtop instruments. Detectors and pumps are the parts that wear first.

Can I get service for older equipment?

Yes. Every verified supplier states which service partners cover the instrument, and we list that alongside the offer.

Where can I buy parts?

Ask a scientist through the request button. Parts are often available even when the instrument itself is discontinued.

What is the typical lead time for refurbished equipment?

Two to six weeks, depending on refurbishment scope and whether calibration is included.

Does laboratory equipment ship internationally?

We ship to 38 countries. Crating and customs handling are quoted with the instrument.

Reply in one hour

Can't find the exact configuration?

Tell us what you need and a scientist finds it for you, usually within the hour.

Last updated 19 October 2026