58k+ listingsShips to NLResponse within one hour+31 73 711 4717info@questpair.com
QuestPair

Yamato SN-300C Standard Sterilizer Without Dryer 32L (100-120V)

UsedYamato ScientificAutoclaves / sterilizersUnited States

From€9,473.66excl. VAT

In stock

Can't find what you're looking for?

Item Code
241006
System
Automatic high-pressure steam sterilization
Operating temperature range
45～135℃ 45～80℃（Preheating temperature）/45～60℃（Heat-retention process）/65～100℃（Solution process）/105～135℃（Sterilization）
Max. working pressure
0.255MPa
Ambient temperature
5～35℃
All 24 specifications
  • Ships to NL
  • Response within 1 hour
  • Warranty available. Buy without worry
  • Support from a scientist

Specifications 24

Brands
Yamato Scientific
New/Used
Used
Item Code
241006
System
Automatic high-pressure steam sterilization
Operating temperature range
45～135℃ 45～80℃（Preheating temperature）/45～60℃（Heat-retention process）/65～100℃（Solution process）/105～135℃（Sterilization）
Max. working pressure
0.255MPa
Ambient temperature
5～35℃
Lid
Manual upward opening with an interlock for safety
Heater
100V, 800W×2 units
Exhaust valve
One exhaust valve and one slow release valve
Connection ports for optional accessories
Total 3 ports. Female thread for sample temp. sensor (1/4" ), Female thread for chamber temp. sensor (1/4" ), Female thread pressure sensor (Branching from the solenoid valve tubing)
Cooling fan
Axial fan motor
Temp. controller
PID control by microprocessor
Temp. display / setting
Digital display / digital setting by ▲/▼ keys
Timer / Timer resolution
0 or 1 min. to 99 hrs 59 min. / 1 min.
Operation mode
Instrument sterilization course, Liquid sterilization course, Sterilization and keep warm course, Melting and keep warm course, Customer-programmed course
Other function
Key locking, Presetting, Saving, Preheating, Forced cooling, Sample temperature sensor (option), Pattern locking, Up to 20 error log saving, Display of accumulated working time / Present time, ON-OFF beeping setting
Safety device
Sensor failure detection, SSR short-circuit, Broken heater wire, Prevention of idle heating (Liquid expansion type), Alarm against the absence of a drain bottle, Failure in locking the lid, Memory error detection, Pressure relief valve (0.255 MPa)
Accessories
2 pcs. stainless steel mesh basket (Dia.262×D204mm), OSM-70/Vapor cup×1, Drain bottle×1, Drain board×1, Chemical indicator 1 set (30 pieces), Filter×1
Internal dimensions（W×H mm）
300×445mm
External dimensions（W×D×H mm）
460×590×848mm
Remarks(dimensions)
Internal capacity 32L
Power Source
AC200～240V Single phase
Weight
75kg

Product description

Automatic high-pressure steam sterilizer, 32L capacity, max 135°C, PID control, multiple sterilization modes

Yamato SN-300C Standard Sterilizer (without dryer) with a 32L chamber volume, designed for efficient steam sterilization in laboratory settings.

  • Operation and Functions:
  • Maximum sterilizing temperature: 135°C suitable for protein modification
  • Supports ordinary sterilization, culture medium sterilization, liquid sterilization, and melting of culture mediums
  • Customizable and savable programs for repeated protocols
  • Timer start, pre-heating function, and cooling fan for reduced cycle and cool-down times
  • Mobile design equipped with wheels for ease of movement
  • Safety Features:
  • Lid interlock mechanism
  • Drain bottle unset alarm
  • Memory malfunction detection
  • Automatic shutdown on malfunction
  • Self-diagnostic functions
  • Technical Specifications:
  • Model code: SN300
  • System: Automatic high-pressure steam sterilization
  • Operating temperature range: 45–135℃, with defined temperature ranges for preheating, heat-retention, solution, and sterilization processes
  • Maximum working pressure: 0.255 MPa
  • Ambient temperature range: 5–35℃
  • Manual lid opening with interlock for safety
  • Heater: Two 800W units at 100V
  • Exhaust system: One exhaust valve and one slow release valve
  • Connection ports (3 total): sample temperature sensor port (1/4"), chamber temperature sensor port (1/4"), pressure sensor port branching from solenoid valve tubing
  • Cooling fan: Axial fan motor type
  • Temperature control: PID microprocessor control with digital display and setting via ▲/▼ keys
  • Timer: Range from 0 or 1 minute to 99 hours 59 minutes, with 1-minute resolution
  • Operation modes include instrument sterilization, liquid sterilization, sterilization and keep warm, melting and keep warm, and custom program courses
  • Additional functions: key locking, presetting, saving, forced cooling, sample temp sensor option, pattern locking, error log saving (up to 20), accumulated and present time display, ON/OFF beeping settings
  • Safety Devices:
  • Sensor failure detection
  • SSR (solid state relay) short-circuit protection
  • Broken heater wire detection
  • Idle heating prevention (liquid expansion type)
  • Alarm for absent drain bottle
  • Lid lock failure detection
  • Memory error detection
  • Pressure relief valve rated at 0.255 MPa
  • Accessories Included:
  • 2 stainless steel mesh baskets (Dia. 262 × D 204 mm)
  • OSM-70 vapor cup ×1
  • Drain bottle ×1
  • Drain board ×1
  • Chemical indicator set (30 pieces)
  • Filter ×1
  • Dimensions and Weight:
  • Internal chamber dimensions (W × H): 300 × 445 mm
  • External dimensions (W × D × H): 460 × 590 × 848 mm
  • Internal capacity: 32 liters
  • Weight: 75 kg
  • Power Source:
  • AC 200–240 V, single phase (12.5–15 A, 50/60 Hz)

Why Questpair exists

Lab equipment markets are fragmented. Buyers spend weeks calling distributors, comparing quotes, and verifying supplier reliability. Sellers struggle to reach global research labs.

We built Questpair to fix this. Every supplier on the platform is verified before listing. Every quote you receive comes from a real, vetted seller. AI prepares your case in minutes, then a real specialist takes over.

We're an independent team based in The Netherlands, working with research labs and procurement teams across Europe and worldwide.

Frequently asked questions

How long does laboratory equipment typically last?

With a service contract, ten to fifteen years is normal for most benchtop instruments. Detectors and pumps are the parts that wear first.

Can I get service for older equipment?

Yes. Every verified supplier states which service partners cover the instrument, and we list that alongside the offer.

Where can I buy parts?

Ask a scientist through the request button. Parts are often available even when the instrument itself is discontinued.

What is the typical lead time for refurbished equipment?

Two to six weeks, depending on refurbishment scope and whether calibration is included.

Does laboratory equipment ship internationally?

We ship to 38 countries. Crating and customs handling are quoted with the instrument.

Reply in one hour

Can't find the exact configuration?

Tell us what you need and a scientist finds it for you, usually within the hour.

Last updated 19 October 2026