Hitachi 917

This listing is for a Labcold Blood Bank RDBB11601 Laboratory Refrigerator.The unit is in full worki (more)ng condition and is ready for immediate release..

The XN-2000 system is a combination of two analysis modules that can be used in clinical application (more)s specified in the specifications. The Rerun & Reflex configuration transforms the system into a superior solution for basic and comprehensive lab research. Because both modules process sample racks simultaneously, the system can handle any sample without any delay. The modules work perfectly together. And you don’t waste precious time even with abnormal samples. With integrated reflex measurement, you no longer have to manually select and reload samples. The reflex sampler automatically feeds the samples into the left module and performs the extended measurement. If there are no abnormal samples in the run, the system speeds up operation by processing standard samples only. Having two modules running at the same time means that you have more certainty about daily routines, because you always have an integrated backup solution at your disposal. To extend the reach of your laboratories, network your XN-2000 with other XNs to create multi-location installations. This way you can link specialized and central laboratories and upgrade the quality of your service. And thanks to our remote service, we can jointly define the level of support quality and guaranteed service response time, and ensure maximum system uptime. Principles and Technology: Fluorescent flow cytometry using a semi-conductor laser and hydrodynamic focusing in dedicated channels Parameters whole blood: WBC; RBC; HGB; HCT; MCV; MCH; MCHC; PLT (PLT-I, PLT-F); NEUT#, NEUT%; IG#, IG%; LYMPH#,LYMPH%; MONO#, MONO%; EO#, EO%; BASO#, BASO%; NRBC#, NRBC%; RDW-SD; RDW-CV;MPV; RET#, RET%; IRF, RET-He; IPF#, IPF% Parameters blood bank mode: WBC, RBC, HGB, HCT, PLT Capacity: Bidirectional, continuous-feed sampler holds up to 50 samples (5 X 10-tube rack) Throughput whole blood mode: 100 samples/hour/unit Throughput blood bank mode: RBC component – 79 samples/hour without WBC; 33 samples/hour with WBC PLT component – 62 samples/hour without WBC; 19 samples/hour with WBC Sample aspiration volume: Whole Blood mode: 88 µL, RBC Pack measurement: 150 µL, PLT Pack measurement: 205 µL, Pre-dilute Mode: 70 μL Quality Control: XN CHECK: complete tri-level QC product for all CBC, Diff, RET and PLT parameters Platelet CHECK: bi-level QC product for Blood Bank mode Comprehensive QC files including current and new lot feature 99 total files including 5 X-barM files Including software

Ac·T diff is an compact system that features the power of Beckman Coulter’s proven histogram differe (more)ntial technology. Ideal for labs performing up to 50 CBCs a day, the Ac·T diff is a popular choice for the low-volume needs of physician office labs and smaller laboratories. Features: One step sample processing with touch screen user interface Automated probe wipe safely cleans the probe Small 12 µL sample size permits whole blood analysis from both venous and capillary collections Compact design lets you put the Ac·T diff anywhere Results available in less than 60 seconds Zero routine maintenance requirements and high system reliability help contain costs Efficient data management with patient and control storage Additional Specifications: Closed vial sampling accommodates a variety of collection tube sizes User-­definable high/low flagging of patient results and quality control simplifies data interpretation Automated QA functions improve productivity Closed vial sampling for controls and calibrators assures operator safety Compact benchtop design requires only two square feet of counter space No routine maintenance and high system reliability help contain costs

The RAPIDLab 348EX Blood Gas System is the cost-effective solution for smaller laboratories tasked w (more)ith the challenge of performing fast-turnaround critical care tests. Fully-automated operation supports low-to-medium throughput on an easy-to-use analyzer that’s ready to generate accurate, on-demand results when clinicians need them, with a minimum of operator involvement.

This Sanyo MCO-18AIC CO2 (UV) Laboratory Incubator was removed from a university lab where ti was su (more)rplus to requirements. The unit powers up and is in good working order but will need to be calibrated upon installation. It is in good cosmetic condition with minor marks from use. Item is supplied with 4 shelves. Internal dimensions are L45cm x W45cm x H66cm.

Eurotherm Process Automation System with TCS Tactician T1000 & Components This was removed from (more) a university lab where it was surplus to requirements. The unit is in reasonable cosmetic condition though the access panel of the switchboard has snapped all its hinges. These will need replacing to secure the unit. We were unable to power the unit or the TCS Tactician T1000 Controller It was not tested further. The cabinet is filled with electrical components.

Leitz Aristoplan Microscope, w/ Sony Power HAD, WILD Leitz MPS 52 Camera Lab This was removed from a (more) university lab where it was surplus to requirements The unit powers up and is in good working order.It is in good cosmetic condition with minor marks. Both cameras have not been tested as the required connecting cables are not supplied. Optic Lenses:-Periplan GW 10x/26 M Leitz WetzlarBoth lenses are intact and clear with no cracks or chips in the glass Magnifications:-Leitz Wetzlar PL 2.5/0.08 160/--Leitz Wetzlar PL FLUOTAR 10/0.30 160/- (519872) Sony Power HAD 3CCD Color Video CameraModel-DXC-950PS/N-406749 Wild Leitz Wild MPS 52

Measurement with application of 4 load cells is a guarantee of precise mass reading, regardless of l (more)oad positioning on the weighing platform. The platform scales C315.4 series is made of mild steel powder coated construction of the weighing platform. The platform comprises 4 load cells connected to an terminal PUE C315 series featuring backlit LCD display and 5 function buttons. The weighing platform and the terminal are connected through a long cable enabling hanging the terminal on a wall. The C315.4 series is available in pit version for easy placing heavy loads on the weighing platform without application of ramps. Scales is available in dual range version on surcharge.

The HX5.EX scale is a modern weighing instrument assuring fast and reliable measurement in hazardous (more) areas classified as zones 1/21 and 2/22. To ensure precision and excellent measurement repeatability, high quality electronic components are used. The weighing platforms offered in wide range of dimensions and maximum capacities, this combined with excellent metrological parameters enables easy selection of an instrument that meets the most demanding requirements. Standard version of the scale is equipped with 2 serial, intrinsically safe RS232 communication interfaces, and with one RS485 interface. They facilitate cooperation with equipment intended for operation in hazardous areas. Possibility to add digital inputs/outputs extends the range of instruments compatible with the indicator by automatic elements compliant with ATEX directive. More demanding customers can use the IM01.EX module, installed in the safe area, which extends the available connectors by Ethernet, USB, 4-20mA/0- 10V analog outputs, Profibus DP and additional digital inputs/outputs. This enables cooperation with external devices: barcode scanners, printers, external displays, control buttons, light signalling towers, other controlling/signalling devices, systems for automatic process control and superior IT systems. Scale operation requires use of a dedicated PM01.EX power supply, which is not a standard scale component. To operate the scale, order a selected type of the dedicated intrinsically safe power supply. Power supply types: PM01.EX-1 - power supply for operation in ATEX area. Used when it is required to connect the power supply to voltage source placed in hazardous area. PM01.EX-2 - power supply for operation outside ATEX area. Used when power supply connection to voltage source is carried out outside hazardous area. Complex software enables carrying out many tasks connected with mass measurement, e.g. parts counting, checkweighing and statistics. The scales feature user-friendly graphic interface, which can be customized using widgets. This and the large colour display of high resolution guarantee easy and clear transmission of data on current process. Colour bar graph significantly influences performance by signalling whether the weighing result is within declared thresholds or not.