Julabo Thermostat Typ E Einhängethermostat

Heating thermostat from 20 to 200°C, with LCD display and simple programming functions LAUDA ECO sta (more)nds out for its range of features and ease of use. ECO thermostats are available in Silver (LCD display; simple programming) and Gold (TFT color display; complex programming) models, equipped with a mini USB interface as standard. A LAUDA innovation is the pressure flow controller located on the front of the head. This means that flow regulation between inside and outside is possible even during operation. - Monochrome LCD graphic display for simultaneous indication of actual and set values - The circulation pump can be adjusted to six levels - Integrated programmer: 1 program with max. 20 segments - Fully electronic continuous regulator with PID action - Additional key Tmax for overtemperature protection - The ECO heating thermostat line includes transparent baths up to 100°C and stainless steel up to 200°C - The most powerful units are equipped with the energy-saving LAUDA SmartCool system - Variants in 230V; the 50 Hz are also available with natural refrigerants - Convenient operation with softkey cursor - Safety class III for operation with flammable and non-flammable liquids. - mini-USB interface - Pump connections with 13mm plastic nipples as standard LAUDA tank thermostats are equipped as standard with a cooling coil. The E 4 model is also equipped with a lid for the bowl and connections for external applications. A drain cock on the rear side makes changing the heat transfer liquid easy and safe. Grafico delle prestazioni di riscaldamento dei termostati di immersione ECO Silver con vasca in acciaio inox. Performance graph of the pump pressing on the six levels. TECHNICAL VISUALIZATION Display 1 - Status display 2 - Display of the internal or external temperature value (T-int or T-ext) 3 - Soft-key bar Control panel 4 - Soft keys, left and right 5 - Enter key 6 - Cursor keys for Up, Down, Left and Right. 7 - T max key: display and adjustment of the overtemperature switch-off point 1 - USB interface 2 - Upper module receptacle approx. 51 mm x 27 mm for analog, RS 232/485 module, Profibus module and contact module 3 - Lower module receptacle approx. 51 mm x 17 mm for Pt100/LiBus module 4 - Connection socket 75S for control cable of cooling underpart for RE 1050 S 5 - Rating label 6 - Connection socket 51H for power supply between the control head and cooling underpart 7 - Mains connecting lead 1 - Cooling coil connections 2 - Pump connection: outflow and return (as standard only with E 4 S and ET 15 S) 3 - Four feet 1 - Mains connecting lead 2 - Rating label 3 - Bath draining tap 4 - Bath drain point

1 block dry heaters Designed for daily use in the laboratory, dry block heaters are ideal for applic (more)ations requiring particular temperature stability. All units house an easily interchangeable modular block, with 40 options to choose from. Close contact between tube and block ensures maximum heat retention for efficient heating. Analog models: economic alternative; low temperature range: +5°C above ambient temperature to 100°C; high temperature range: 75°C to 150°C; control via two temperature adjustment knobs. Digital models: for repeatable results; from 5 ° C above ambient temperature to 120°C; control via touch pad controls with independent and easy to read LED displays for temperature and time display; sound alarm. - Exceptional temperature uniformity and extraordinary thermal stability. - Unique single point calibration function to ensure accurate display of actual temperature (digital models) Applications Culture incubation and activation, enzymatic reactions, immunoassays, melting / boiling points, isothermal incubation, nucleic acid denaturation Display LED display in digital models and knob with double adjustment and markings in analog models Operation Detachable three-wire cable and plug (included). Analog models require an external thermometer or temperature adjustment tool for the setpoint Structure Painted steel armor and support bar attachment with fixing knob Construction features Keypad control and audible alarm (digital models) Technical Specifications

Grant R5 Low Temperature Bath/Circulator + Grant GD120 Thermostat This was removed from a university (more) lab where it was surplus to requirements. The unit powers up and is in good working order (Thermometer not included). It is in good cosmetic condition with minor marks. Includes: -1 x Grant R Series Manual-1 x Grant Thermostat GD120 Manual

Proline heating thermostat with tank Proline clear-view LAUDA thermostats have been designed for dir (more)ect observation of objects. They are ideal for use with LAUDA Scientific PVS or iVisc automatic viscometer, as the necessary temperature stability for precise viscosity determination is ensured over the entire temperature range. In addition, the two-chamber principle always guarantees a constant liquid level in the measuring chamber, regardless of the volume and temperature of the medium. PVL models with five layers of insulating glass are suitable for low temperature measurements down to -40° or -60°C when a low temperature chiller or thermostat is connected. These thermostats are available with two different control units. The Master version is designed for all applications where the parameters are not changed very often. The removable Command operating unit (PV C models) incorporates a graphic LCD screen for high operating convenience and a programmer. Notable features - LAUDA Vario Flex pump (pressure pump) with eight selectable power levels - Cooling coil fitted as standard with connection for additional cooler Accessories included Fittings for pump connection, cooling coil Specific features of the Proline PV 24 model - Tank volume min. 19 L - Tank volume max. 24 L - Tank opening 405 x 135 mm - Bowl depth 320 mm - Usable depth 285 mm - Upper height of the tank 390 mm - Master control panel; calibration point, timer, under / over temperature alarms, digital indicators - Pump pressure mx. 1.1 bar - Water-cooled temperature range from 20°C to 230°C - Operating temperature range from -30°C to 230°C - Pump connectors M16 x 1 - Fitting 13 Ø

Memmert IN75plus Natural Convection Incubator 74L, 115V Setting Temperature Range +20 to +80°C Conv (more)ection Type Natural Convection Chamber Volume 74 L (2.6 cu.ft.) Features - Setting temperature range from +20 to +80 °C, with a working range at least 5°C above ambient - Internal volume of 74 L (2.6 cu.ft.) with a maximum chamber load of 264 lbs (120 kg) - ControlCOCKPIT with TwinDISPLAY, featuring an adaptive multifunctional digital PID-microprocessor controller with 2 high-definition TFT-color displays - Natural convection system and admixture of pre-heated fresh air by electronically adjustable air flap - Includes AtmoCONTROL software for data logging via Ethernet interface, USB stick available as an accessory - Temperature control features adjustable overtemperature monitor and mechanical temperature limiter according to DIN 12880 - Comes with two stainless steel grids, fully insulated stainless steel door, and an inner glass door - Stainless steel interior, reinforced with deep drawn ribbing and integrated large-area heating on four sides The Memmert IN75plus Natural Convection Incubator 74L, 115V offers advanced temperature control and versatility for various laboratory applications. With a setting temperature range from +20 to +80°C and a working temperature range starting 5°C above ambient, it ensures precise incubation conditions. The TwinDISPLAY ControlCOCKPIT allows for easy adjustment of essential parameters like temperature, air flap position, and timer, while two Pt100 sensors ensure accurate temperature monitoring and mutual functionality in case of sensor failure. The natural convection system guarantees uniform temperature distribution, ideal for sensitive samples, and the adjustable pre-heated fresh air admixture helps maintain optimal air quality within the chamber. This incubator also features a durable stainless steel interior with a capacity of 74 liters, reinforced by deep drawn ribbing and integrated large-area heating for even thermal regulation. The fully insulated stainless steel door with an inner glass door provides safety and visibility. With AtmoCONTROL software, users can conveniently manage data logging and programming through USB or Ethernet. The IN75plus is built for high-performance with a maximum chamber load of 264 lbs and can accommodate up to six shelves, making it a robust, reliable choice for professional laboratory environments. INCLUDED: TheMemmert IN75plus Natural Convection Incubator 74L, 115V includes: - 2 Stainless Steel Grids - Tilt Protection Wall Bracket - Calibration Certificate - Power Cord - Operator's Manual - Manufacturer's Documentation - 3 Year Manufacturer's Warranty

Measurement with application of 4 load cells is a guarantee of precise mass reading, regardless of l (more)oad positioning on weighing platform. H315.4 H/Z The platform scales H315.4 H/Z series is fully made of stainless steel profiles with stainless steel weighing platform. The scale features 4 load cells, and it is prepared for mounting as a pit version. The device comes standard with opening weighing platform enabling easy cleaning the area beneath the platform. The H315.4 H/Z series features a stainless steel terminal PUE H315 series with backlit LCD display and function buttons. The terminal is installed on a long cable for easy mounting it on a wall. The scale is powered from mains, RS 232 interface comes standard. Scales is available in dual range version on surcharge. The frame for recessing (foundation) is part of the set – you will receive it with the ordered scale.

Ohaus FC5916 Frontier Multi-Pro Centrifuge Meet the Ohaus FC5916 Multi Pro Centrifuge - a versatile  (more)powerhouse designed to cater to a wide array of applications in research, industrial, and clinical laboratories. With a robust speed range of 200 rpm to 16,000 rpm, this centrifuge offers an impressive maximum relative centrifuge force of 24,325 g and can hold up to 4 x 750 ml with its rotor, rendering it highly adaptable to your specific needs.Product Specifications: - Speed Range: 200 rpm – 16,000 rpm - Maximum Relative Centrifuge Force (x g): 24,325 g - Maximum Capacity (Rotor): 4 x 750 ml - Item Number: 30553037 Whether you're focusing on centrifugal separation, general sample preparation, cell pelleting, protein separation, nucleic acid separation, cell concentrating, chemical separation, diagnostics, environmental sample preparation, or blood sample processing, the FC5916 is an exceptional choice.The Ohaus FC5916 is designed to work seamlessly with a variety of rotors and accessories, granting you the flexibility to tailor your workflow as per your needs. Its easy-to-read, backlit LCD display, automatic rotor recognition, and user-friendly design ensure an intuitive operational experience, saving you valuable time and effort.Driven by German engineering and crafted using high-quality components, this centrifuge ensures dependable performance and exceptional durability. Its corrosion-resistant stainless steel chamber, combined with a Polycarbonate/ABS plastic lid, stands the test of time even in the most demanding lab environments.Safety is paramount in any lab environment, and the FC5916 does not compromise. Its suite of safety features includes automatic over-speed protection, imbalance detection, and a self-diagnostic system, ensuring not only reliable use but also safeguarding the operator's safety.Opt for the Ohaus FC5916 Multi Pro Centrifuge - an intuitive, versatile, and safe solution for all your centrifugation needs, designed to provide high-speed performance, durability, and maximum flexibility in various lab settings.Click Here to View Product Video INCLUDED: The Ohaus FC5916 Frontier Multi-Pro Centrifuge includes: - Power Cord - Two Year Manufacturer's Warranty

Boekel Scientific 270300 Microplate Shaker 2 Plate, 115V/230V The Boekel Scientific Microplate Shake (more)r is a reliable, programmable laboratory shaker for microplates. The unit provides regulated and timed shaking for two or four microplates. Ideal for any lab. Features: •Reliable, regulated shaking for two or four microplates •Simple screw attachments allow quick and easy fitting of any standard depth 96- or 384-well plates, holding the plates securely in place •Standard platform for two microplates, included •2 year warranty •Power Pac is UL, CSA and CE marked INCLUDED: The Boekel Scientific 270300 Microplate Shaker 2 Plate, 115V/230V includes: - Standard Platform - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Voltage range van 0-300 V. Ampere range van 0-100 mA. Power: 55 VA. Dimensions (H x W x D): 98 x 220 (more) x 180 mm.