Scilogex TC1000-S Thermal Cycler

Accuris PR2121-N-1000 qMAX Probe One-Step RT-qPCR Kit, No Rox, 1000 Reactions qMAX Probe One Step Mu (more)ltiplex kits are specifically developed and optimized for efficient probe-based detection of multiple targets in a single reaction well. The Multiplex formulation is comprised of a 20x reverse transcriptase and 2x PCR Mix preparation ideally suited for complex RNA samples including low-copy number viral RNA commonly used in the clinical and research laboratory. INCLUDED: The Accuris PR2121-N-1000 qMAX Probe One-Step RT-qPCR Kit, No Rox, 1000 Reactions includes: - Accuris PR2121-N-1000 qMAX Probe One-Step RT-qPCR Kit - No Rox - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Benchmark BSH5001-1B myBlock l- digital dry bath with 1 Quick-Flip blocks (BSWCMB) for tubes (0.2 to (more) 2.0ml, PCR strips and PCR plates, 115VBenchmark’s myBlock series is a “next generation” product line that introduces several major advantages over traditional dry baths. They are the first digital dry baths to include advanced microprocessor controls, timed or continuous operation and a removable hinged lid. In addition, an optional external temperature feedback probe can be positioned directly inside a sample tube, providing real-time control and monitoring of actual sample temperature.The myBlock’s transparent lid helps to promote better uniformity and minimize temperature stratification in the block by maintaining a warm air jacket layer. It also helps to reduce energy consumption by minimizing heat loss to the environment. The hinged lid can be flipped open (to the rear), or easily removed (lifted off). Both the single and dual block models can be ordered in a configuration that includes our unique Quick-Flip™ blocks. These universal blocks accept tubes from 0.5 to 2.0ml and, with just a quick flip to the other side, accomodate 0.2ml tubes, PCR strips or (in the dual block model only) a PCR plate. Other blocks are available for tubes up to 50ml. Click Here to View Product Video INCLUDED: The Benchmark BSH5001-1B myBlock l- digital dry bath with 1 Quick-Flip blocks (BSWCMB) for tubes (0.2 to 2.0ml, PCR strips and PCR plates, 115V includes: - BSH5001 myBlock l Dry Bath - BSWCMB Quick-Flip Block for 0.2 to 2.0ml tubes, PCR strips, and PCR plates - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Perkin Elmer LabChip GX Touch HT Automated Bioanalysis System This item was removed from a universit (more)y where it was surplus to requirements. The system is in fair cosmetic condition and powers on. We are unable to conduct further testing at our facility. Password not required. Includes the following: - Wireless keyboard - Wired Mouse

400 x Skirted PCR Plates, 96-Well Low-Profile, Natural These are sold on behalf of a client. The lot (more) is brand new and unused. Quantity - An Overpack of 400 plates. Make/Brand - FisherbrandModel Number - 14230237Product Number - 12154112Exp Date - N/ASKU - PLA-96WELL-FIS The normal terms and conditions do not apply to this item. This item is non returnable and non refundable.

Eppendorf MasterCycler Nexus SX1 thermal cycler with fast silver block. Flexlid Concept capable of a (more)ccommodate all kind of PCR tubes and plates with a sample capacity of 96 × 0.2 mL PCR tubes, strips or 1 PCR plate (96 wells). Heating and cooling technology by Peltier elements. Temperature Range from 4 to 99 °C, with an accuracy of ± 0.2 °C and uniformity of ± 0.3 °C. Heating and cooling rate of max. 3°C/s. No gradient capacity. Heated lid 37 – 110 °C with Output USB, Ethernet, CAN in, CAN out. Dimensions (HWD): 320*410*250 mm; 11,2 kg. User manual. The Eppendorf MasterCycler Nexus SX1 thermal cycler provides scientists with flexibility with a silver block for increased speed that can accomodate several standard tube types from 0.2 mL tubes to 96 well plates, there is no need to buy additional blocks. It also provides robust thermal cycling in a compact footprint with intuitive graphic control.

SCILOGEX EZee Mini-Centrifuge, Blue Lid, for 0.2/0.5/1.5/2.0mL Tubes & PCR8 Strips Max. Speed 7 (more),000 RPM Max. Capacity 8 x 1.5/2.0ml micro-tubes Driving Motor DC Features - Available in two colors i.e., green, blue - Easy-to-use with dual start/stop function. - Maximum speed 7000rpm/2680xg - Supplied with an 8 place 1.5/2.0ml microtube rotor and 16 x PCR tube rotor & 0.2/0.5ml tube adapters. - Compact design - Whisper quiet operation, noise level ≤ 45dB - Ideal for quick spin downs of microtubes and PCR tubes - Simply close the lid for acceleration and open the lid for deceleration or use the on/off switch. - Accelerates and brakes in seconds. - Universal voltage - Rotors change without tools. EZee mini centrifuges are ideal for microfiltration and quick spin downs from the walls and caps of microcentrifuge tubes. The compact design takes up less than six inches of bench space. Easy open clear colored lids are available in four colors. Simply close the lid for acceleration and open the lid for deceleration, or alternatively use the on/off switch. Click Here to View Product Video INCLUDED: The SCILOGEX EZee Mini-Centrifuge, Blue Lid, for 0.2/0.5/1.5/2.0mL Tubes & PCR8 Strips includes: - 8 Place 1.5/2.0ml Microtube Rotor - 16 x PCR Tube Rotor - 0.2/0.5ml Tube Adapters - Power Cord - Operator's Manual - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

This Don Whitley Scientific miniMACS Anaerobic Workstation was removed from a university lab where i (more)t was surplus to requirements. The unit has been looked at by a qualified service engineer. The pump works from the main socket but not from the instrument socket. They cleaned the filter which was previously making the pump run loudly. They repaired the fans which were previously broken. They have tested the cabinet with a vacuum pump and it seems it is holding the vacuum. Although one piece of plexiglass holding the right door lock is broken. The system holds a vacuum despite this. The temperature was tested up to 37˚c, it took about an hour to reach this. It is in reasonably good cosmetic condition but has some minor marks from use and the aforementioned crack.

External dimensions (WxDxH): 600 x 595 x 635 mm Internal dimensions (WxDxH): 503 x 463 x 480 mm Max  (more)single load: 10 L Max symmetrical distributed load: 30 kg Weight: 125 kg

HX7 H scale’s multi functions Many functions, many interfaces and great robustness (IP66/ IP68 (more)) mean many possibilities for you to use this advanced scale. Tomorrow you can apply it to a different process than today – that’s the multifunctionality. That’s the saving! Use the potential Barcode scanners, receipt printers, label printers, external displays, control buttons, light signalling towers and other controlling/ signalling devices – thanks to multipurpose software, HX7 scale can work with all of them. You can easily connect them thanks to the fact that the balance is equipped with interfaces: RS232, RS485, USB, Ethernet, 4 IN/ 4 OUT. Optionally, the balance can be equipped with 12 IN/ 12 OUT and analog output module. You can find all accessories in our regular offer. And if you have questions about compatibility, our experts will help you. Easy and pleasant Simple and convenient operation with a 7-inch color display. Perfectly visible messages additionally supported by bargraph. The top part of the operation panel features a bar graph consisting of 9 red and green diode fields. The bar graph is a graphic visualisation informing the user on a current net weight of a product presented with reference to the scale range or declared min and max thresholds. The bracket allows the terminal to be placed on any flat horizontal surface or screwed to the wall with adjustable angle. The power of steel The use of stainless steel guarantees you a long life for the scale. It is not afraid of contact with moist objects or accidental splashes. The construction of the scale is made of a stainless steel. This guarantees you work for many years. Not just weighing But also parts counting, dosing, percent weighing and formulations. The power of HX7’s working mods. Do you need ALIBI? There you have it. ALIBI memory is like a black box of a scale. It records all measurements taken on the device. The ALIBI memory cannot be modified or erased. Referring to stored weighings you can generate weighing reports, formulation reports and reports on performed control processes. Single weighing is stored in the ALIBI memory as long as it is specified by a Weighing Storage Period (days) parameter.

It is the ideal solution for laboratories and institutions requiring the highest precision. The cyli (more)ndrical mass standards are made from the highest quality materials, ensuring their stability and resistance to changes in environmental conditions. This makes them perfect for the calibration of precise measuring instruments. Product Features: Highest Class of Accuracy: Class E1 is the highest standard of accuracy, making these standards ideal for calibrating precision measuring instruments. Cylindrical Shape: The cylindrical shape of the standards ensures ease of handling and precise placement on weighing platforms. Wooden Packaging: The standards are delivered in an elegant wooden box, which ensures their safe storage and transport. Set Includes: 13 mass standards, 2 pairs of tweezers, 2 brushes and 1 pair of gloves. Applications E1 class standards are ideal for the calibration and verification of precise analytical and laboratory balances, indispensable in metrology laboratories, as well as in research and industrial institutions where maintaining the highest standards of accuracy is necessary. By choosing the E1 class mass standard set from RADWAG, you invest in reliability, precision, and durability, which translates to excellent quality in your laboratory work.

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW