Binder CO2 Incubator Series CB CB 150 Lab

BINDER KB-115 refrigerated incubator / drying oven with forced convection 100°C Model: KB115 refrige (more)rated and ventilated Capacity: 115 liters Temperature range: -5 ° C to 100 ° C Inner glass door Integrated digital temperature display 2 shelves Cable passage: Ø 30 mm (on the right wall) Power supply: 230 V, Frequency: 50-60 Hz, Power: 460 W, Internal dimensions: 60 x 40 x 48 cm Overall dimensions: 83 x 70 x 101 cm Weight: 106 kg Year of manufacture: 2010 Tested at 37°C and -2°C

Sanyo CO2 Incubator MCO-17AIC This was removed from a university lab where it was surplus to requir (more)ements. The unit powers up but has an issue with CO2 leaking. It is sold for spares/repairs.

Genlab Model LCI/12V/PDIG Lab Incubator This was removed from a university lab where it was surplus  (more)to requirements. The unit powers up and is in good working order. (Digital thermometer not included) 4 Shelves - 60 x 60cm

New Brunswick Innova 4400 & Innova Shaking Incubator. This was removed from a university la (more)b where it was surplus to requirements. The unit has been assessed by a service engineer and has had the following replacement parts fitted. Motor.Temperature sensor bracket.Door mechanism.Gas struts.Base.Various panels. It has been tested at various speeds and is shaking well. It has been temperature tested at:37ºC - It reached this temp fine. We calibrated it with our SmartVue Thermometer (not included).80ºC - It reached 73ºC and it was at this temperature for quite a while. The unit is in good cosmetic condition but has marks from use. The manual is supplied.

Yamato IC-403CR General Purpose Incubator with Communication Port 97L, 115V Temperature Range Ambie (more)nt +5°C to 80°C Temperature Distribution Accuracy ± 1.0°C Chamber Volume 97L Features - Space saving - All lab incubator models come with either an observation window (W) for improved visibility or solid door - Dual door system permits contents to be viewed easily without disrupting atmosphere of the lab incubator (except IC-100 series) - Control panel of IC103C/113C located at a higher position for easy access - Easy to use digital setting display and timer - Air jacket technology ensures even and efficient heat distribution throughout the lab incubator chamber - Standard equipped with various functions such as self-diagnostic, calibration off-set, overheat prevention and key lock - Models 400 to 900 have an option for communication port (R) Economical general purpose 97L natural convection incubator with communication port. The dual door system permits contents to be viewed easily without disrupting the atmosphere of the incubator. Easy to use digital setting display and timer. Air jacket technology ensures even and efficient heat distribution throughout the chamber. Standard equipped with various functions such as self-diagnostic, calibration off-set, overheat prevention and key lock. Operating temperature range: +5~ 80°C. INCLUDED: The Yamato IC-403CR General Purpose Incubator with Communication Port 97L, 115V includes: - 2 x Shelves w/ Brackets - Power Cord - Operator's Manual - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Benchmark SureTherm CO2 Incubator, 180L with High heat Decontamination Cell cultures depend on optim (more)ized growth conditions in order to thrive. With precise temperature and CO₂ control, Benchmark’s SureTherm™ Incubators provide the perfect environment for your cultures. All SureTherm™ Incubators feature a proprietary heat distribution system that combines six sided heating with a low speed internal fan. Air is circulated uniformly throughout the chamber without air exchange from the external environment. This results in a controlled, protected environment with minimal temperature fluctuations (within 0.1°C). These are the first and only incubators equipped with our (patent pending) IncuView™ LCI (Live Cell Imaging) technology for viewing cells in “real time”. An internal microscope and large, external display allow cells to be viewed without removal from the incubator, eliminating the inherent temperature fluctuations and risk of contamination. Cells are easily viewed on the large, integrated display or viewed locally or remotely with a wifi enabled phone, tablet or computer.** Cell viewing requires optional IncuView Integrated Microscope Shelf (Item H3565-45-LCI or H3565-180-LCI.)INCLUDED: The SureTherm CO2 Incubator, 180L with High heat Decontamination includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Temperature range: 5°C to 35°C Temperature stability: 0.1°C Cooling capacity (Ethanol): 5 kW Max flo (more)w rate (at 0 bar): 33 L/min Max pressure (at 0 liters): 3.5 bar Filling volume: 43 to 60 L Dimensions (WxDxH): 590 x 670 x 1120 mm Weight: 153 kg

Orbit Marine Div AL-7100-SDU-MK2 Servo Driver Unit This was removed from a university lab where it w (more)as surplus to requirements. It is in good cosmetic condition but has not been tested at our facility.

VACUUBRAND DCP 3000 Vacuum Gauge with VSK 3000 Head Upper Measuring Limit 1080 mbar/hPa (810 Torr)  (more)Lower Measuring Limit 0.1 mbar/hPa (0.1 torr) Interface RS232C Features - Vacuum measuring device for connecting external vacuum sensors for measurements directly on the system - Flexible and expandable with up to eight sensors, four of the types VSK 3000 / VACUU·VIEW (Atm. to 0.1 mbar) and VSP 3000 / VACUU·VIEW extended (Atm. up to 10-3 mbar) - Relative pressure measurement with reference sensors (VSK 3000) and data logger function with up to 32000 measuring points (RS 232C) - Capacitive ceramic diaphragm vacuum sensor VSK 3000 made of aluminum oxide with high chemical resistance, gas type independent absolute pressure Measurement - Excellent measurement accuracy, temperature and long-term stability The fully electronic vacuum measuring device DCP 3000 is both versatile and decisive with its mechanical robustness, measuring accuracy and reliability. The large, illuminated display provides the measured value display of all connected sensors via an easy-to-use rotary control. Up to eight vacuum sensors (four of each type VSK 3000 / VACUU·VIEW and VSP 3000 / VACUU·VIEW extended) can be connected to the DCP 3000. The measurement can be carried out directly on the application. The DCP 3000 enables a relative pressure measurement (reference sensor VSK 3000) as well as working with pressure-dependent switching points by specifying switch-on and switch-off points on an external valve. The vacuum measuring device can also be used as a data logger with up to 32,000 measuring points. The data is read out via the serial interface (RS 232C). The ceramic membrane vacuum sensor VSK 3000 is suitable for the measuring range from atmospheric pressure to 0.1 mbar. It measures regardless of the gas type and is highly chemically resistant, which means that the measurement can be carried out directly at the process, with excellent measurement accuracy and high long-term and temperature stability. Please also note our alternative product VACUU·VIEW.INCLUDED: The VACUUBRAND DCP 3000 Vacuum Gauge with VSK 3000 Head includes: - Kit Hose Nozzle DN 6/10 mm - Power Supply - Operator's Manual - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

The newest line of Radwag Mass Comparators enables adjusting mass standards and weights according to (more) the OIML recommendations (R-111) from 1 mg to 5 kg for E1 class and lower. Mass comparators are used both for ensuring traceability of mass measurements, and verification of weights in accordance with the principles of legal metrology. RADWAG Mass Comparators have gained recognition among Accredited Calibration Laboratories in many countries. Mass comparator WAY 5Y.KO series similarly to other models, comprises two components. One of them holds the electronic module, and the other precise mechanical measuring system. The WAY 5Y.KO series comes standard with an aesthetic, large weighing chamber with glass anti-draft shield. All elements of the weighing chamber are manufactured from glass or metal to minimize the influence of electrostatic charges on weighing result. Mass comparator WAY 5Y.KO series features an intuitive menu supporting a user while operating the instrument.

Motic 32 Student License w/ 2 Routers and Network Switch for MoticNet Software MoticNet offers the t (more)eacher a live overview for each student Digital Microscope Station. This overview can be extended to cover up to 32 individual microscopes with wifi cameras/tablets, so that even larger classes can be managed by a single teacher with ease. Knowing instantly what is going on at each station, the teacher can focus on presenting the actual teaching material. Additionally, the work at one student's station can also be shared with the entire classroom. This product provides licensing for 32 students, and includes two factory configured routers for use of MoticNet. INCLUDED: The Motic 32 Student License w/ 2 Routers and Network Switch for MoticNet Software includes: - 32 MoticNet Student Licenses - 2 Factory Configured Routers - Manufacturer's Documentation - 5 Year Manufacturer's Warranty

Adam Equipment LTB 2602I Luna Precision Balance, 2600g, 0.01g Capacity 2600g Readability 0.01g Repe (more)atability 0.02g Features - Vivid, backlit LCD easily visible in any lighting conditions - Colour-coded keys facilitate quick recognition of the most frequently used buttons - Level indicator and adjustable feet ensure proper balance setup for optimum weighing results - Security slot for optional Kensington-type lock and cable to help prevent theft - Large, grade 304 stainless steel pan allows easy cleaning - Sealed keypad protects against dirt and spills - USB and RS-232 interfaces provide speedy communication with computers and printers - External calibration allows for verification and adjustment with weights ("I" models also feature internal automatic calibration) - Multilingual display permits use in various regions - Parts counting with preset sample sizes - Printouts include date and time for data tracking within Good Laboratory Practices (GLP) guidelines - Selectable digital filtering for animal/dynamic weighing enables consistent results for moving subjects - Auto power-off to save energy The Adam Equipment Luna Precision Balances can meet the diverse weighing needs in a variety of labs, with numerous features and functions included. The Luna series offers improved performance for faster, more accurate readings. The Luna series also combines durability and performance in a stylish design, with an LCD that delivers results in large 24mm digits in white on a black background. Suitable for international use, Luna provides a useful multilingual text and display capability. RS-232 and USB facilitate data gathering and enable smooth communication with printers and computers. Designed to tolerate demanding lab tasks, Luna is constructed with easy-to-clean ABS plastic construction and a durable grade 304 stainless steel pan. The Luna Precision Balances are available in 20 different models that offer internal or external calibration, capacities from 220g to 15000g, and readabilities from 0.001g to 0.01g. INCLUDED: The Adam Equipment LTB 2602I Luna Precision Balance, 2600g, 0.01g includes: - Power Cord - Operator's Manual - Manufacturer's Documentation - 5 Year Manufacturer's Warranty