All categories

This Thermo Scientific Matrix Hydra II Automated Liquid Handling System was removed from a universit (more)y lab where it was surplus to requirements. The system is in good cosmetic condition with marks from use. All modules power up. We had a service engineer inspect and test this system after setting up and connecting all the electronic connectors but not the pipes. The 1-channel nanofill mechanism was stuck so they took it apart and lubricated it. It's now working fine and can be controlled by the PC. The matrix stage is working fine and can be controlled by the PC but the dispenser is not working. The Hydra pump Module: They have changed the two fan guards with better ones and cleaned the fan. Now they are looking better. This module is working fine and communicates with the PC as normal. We can run test protocols but from time to time we got some error messages. I think that because the fact we have not used any liquid and the system sends feedback when the liquid passed through some parts. The system is made up of the following; 1 x Matrix Hydra IICat no. 109610 1 x Matrix 2 Position Stage 1 x Apogent Discoveries Matix Hydro Pump ModuleThe unit powers on with all 3 Fills working. 1 x Matrix P1 Control Box 1 x Innovadyne 1-Channel NanofillThe unit powers up. 1 x Grant Instruments Type MS1The unit powers up. Dell Laptop with Microsoft MouseModel - PP04XHydra II-Plus-One Control Software Version 3.1.3 InstalledThe unit powers up and the software runs. Software Discs:Matrix Hydra II-Plus-One Control Software Version 3.1.3Matrix Hydra II-Plus-One Control Software Version 3.1.2SuperLogics LE Software Suite Rev 2.92 x Socket Installation discs Various tubing and accessoriesOperating instructions

Gynkotek  P 580 A HPLC Pump & Dionex UVD 170S UV Detector System This was removed from a un (more)iversity lab where it was surplus to requirements. The system powers up but has not been tested further. It is in reasonably good cosmetic condition with marks from use. It comprises of; 1 x Gynkotek HPLCType - P 580A 1 x Dionex UVD 170SPN - 6068.4000A 1 x Dell Optiplex G1 with Keyboard & MouseModel no. MMPChromeleon Client Version 4.20 Build 350 1 x Box including:-Gynkotek HPLC Pump Series P580 Operating InstructionsGynkotek HPLC UV/VIS Detector UVD 170S/340S Operating InstructionsChromeleon Chromatography Data Systems Version 4.20 Software CD & Tutorial

This Lancer Labsec 1400 14UP Glassware Dryer was removed from a university lab where it was surplus  (more)to requirements. The unit powers up and is in good working order. It is in reasonably good cosmetic condition with marks from use.

This item has just arrived in our stock. Please enquire for further details.

Lauda Alpha RA 8 Cooling Thermostatic Water Bath This was removed from a university lab where it was (more) surplus to requirements. The unit powers up and is in good working order. (Digital thermometer used for testing not included). It is in good cosmetic condition with minor marks.

Pharmacia LKB FPLC System This was removed from a university lab where it was surplus to requiremen (more)ts. The system powers up and is in good cosmetic condition Included are; 1x Controller LCC-500 PlusS/N: X D 00197 1x Fraction Collector Frac-100S/N: 56100982 F3 005939 1x Pump P-500S/N: 56102694 E5 012109 1x Single Path Monitor UV-1 Optical UnitS/N: 226622 1x Single Path Monitor UV-1 Control UnitS/N: 221274 1x Whatman Filter paper pack of 1002x Filter Kit 280m2x bag of adapters6x thermal paper

This Jouan IGO150 CELLlife CO2 Laboratory Incubator was removed from a university lab where it was s (more)urplus to requirements. The unit powers up and is in good working order. (Temp and CO2 sensor not included). While it was working well with our equipment and in our testing room, it may require calibration to your equipment and lab environment upon installation. It is in reasonably good cosmetic condition with some marks from use. The front right leg is bent, but is level. Internal dimensions 48x58x48cm LWH

This New Brunswick Galaxy 170 S CO2 Laboratory Incubator was removed from a university lab where it  (more)was surplus to requirements. The unit has been professionally serviced and is in good working order. Internal dimensions - D45 W53 H69cm4 Shelves 43 x 52cm1 Tray - 35 x 33 x 4cm It is in reasonably good cosmetic condition with some marks from use.

Lauda Alpha RA 8 Cooling Thermostatic Water Bath This was removed from a university lab where it was (more) surplus to requirements. The unit powers up and is in good working order. (Digital thermometer used for testing not included). It is in good cosmetic condition with minor marks.

This Labcaire Aura550EH Fume Hood was removed from a university as part of a clearance. We have powe (more)red the unit on and it is showing a red light. We are not sure if this in indicative of a fault. It is in working order. It is in good cosmetic condition with some marks and scuffs.

Plasmaquest Magnetron Sputter Coating System This was removed from a university lab where it was sur (more)plus to requirements. The system has not been tested and we were advised by the lab that it was in unknown working condition and that parts may have been removed. Included are; 1 x Plasmaquest ECR Power Supply.1 x Plasmaquest AX2115 1500W Microwave Power Generator.1 x VAT Adaptive Pressure Controller PM4.1 x Model ACG- 5DC.1 x Astex Model No. LS.1 x Astex Model No. SXRH.1 x Universal Flow Rate Indicator Model No. WVS5GM-2-A1ND-PM-1D.1 x Warner Electric Linear Actuator Control. We anticipate a level or refurbishment will be needed to get this system back into working order, so it is sold for spares/repairs.

This Leica MZ95 High-Performance Stereomicroscope was removed from a university lab where it was sur (more)plus to requirements. The unit is in good used cosmetic condition but it does have various marks and signs of general use. It has been tested and appears to work as it should. Note there is no cable or PSU to power the attached Leica L2 gooseneck lamps. These have not been tested. The microscope is fitted with the following parts: 1 x Leica 10445619 AS Binocular head.Fitted with 2 x Leica 10445111 10x/21B eyepeices. 1 x Leica 10 446272/5092251 Optics Carrier.Fitted with the following objectives: 0.63x0.8x1.0x1.25x1.6x2.0x2.5x3.2x4.0x5.0x6.0x It is also fitted with a: Leica 10 445 819 Planachromatic 1.0x lens. NOTE: The circuit board shown is for demo purposes only!

Lauda Alpha RA 8 Cooling Thermostatic Water Bath This was removed from a university lab where it was (more) surplus to requirements. The unit powers up and is in good working order. (Digital thermometer used for testing not included). It is in good cosmetic condition with minor marks.

61,440 Integra Tips 1250 uL, VIAFLO, 5 Racks of 96 Tips, Sterile, Low Retention (6544) These are sol (more)d on behalf of a client. The lot is brand new and unused. Quantity - Pallet of 32 BoxesMake/Brand - Integra BiosciencesModel Number - 6544Product Number - 6544Exp Date - N/ASKU - TIP-1250SLR-INT The normal terms and conditions do not apply to this item. This item is non returnable and non refundable.

61,440 x Integra 1250 uL,5 VIAFLO 96 Racks of 96 Tips, Sterile, Filter (6445) These are sold on beha (more)lf of a client. The lot is brand new and unused. Quantity - Pallet of 32 boxes. 5 Racks in 1 Pack. 4 Packs in a Box.Make/Brand - Integra BiosciencesModel Number - 6445Product Number - 6445Exp Date - N/ASKU - TIP-1250SF-INT The normal terms and conditions do not apply to this item. This item is non returnable and non refundable.

This Beckman Centrifuge Model - J2-21 Cat no. 341737 with JA-10 10000rpm Rotor was removed from (more) a university lab where it was surplus to requirements. The centrifuge has been professionally serviced and is in full working order. There is a full report available on request. Included are manuals for the centrifuge & rotor along with some O-Rings for the JA-10. Rotor Type - JA-10SN - E 209946 X 500ml Slots

Perkin Elmer LS 55 Luminescence Spectrometer This was removed from a university lab where it was sur (more)plus to requirements. The unit powers up and is in good cosmetic condition with marks from use.

This was removed from a laboratory where it was surplus to requirements. The system powers up and is (more) in reasonably good cosmetic condition with marks from use, though there is a plate/tray missing from the front of the XT-2000i Included are; 1 x Sysmex XT-2000i Automated Hematology Analyzer 1 x Pneumatic Unit Model - PU-17 Software discs:-Sysmex XT-2000iV Version 00-10Sysmex SUIT Software Version 2.4.0.0 + USB Back up toolSysmex Recovery DVD-ROM XE XT XS IPU DC8000Sysmex Sybase iAnywhere 5.5.04Sysmex XT-2000i System Program Type 3XT21 Ver. 15979 (Floppy disk)

Edwards nXDS6i Dry Scroll Vacuum Pump This system was removed from a university lab where it was sur (more)plus to requirements. The unit is in very good cosmetic condition and is in good working order. Specifications:- Serial No.: 190064172 - Part No.: A73501983 - Speed: 1800 rpm - Displacement: 6.3 cuM/hr - Ultimate Vacuum: 0.020 mBar - Inlet/Outlet Flange: NW25 - Electric Supply: 100 or 240V, 50/60Hz - 2 x Data Ports for remote operation

This Interlas Syncrotig 375 AC/DC Gas Tungsten-Arc/Shielded Metal Arc TIG Welder was removed from a  (more)university engineering lab where it was surplus to requirements. We haven't tested it at our facility further than powering it up but the lab said it was fully working prior to removal. It is a complete system. Actual unit dimensions - D58 W80 H143.5cm (comes on a trolley for mobility)27 x 58cm Platform to hold gas bottles. it is in reasonably good cosmetic condition with marks from use.

This New Brunswick Scientific Classic C24 Incubator Shaker was removed from a university lab where i (more)t was surplus to requirements. The unit is in good working order and has been tested with a digital thermometer (not included). It runs well up to 400rpm. It is in reasonable cosmetic condition but has some fairly heavy usage marks. Internal dimensions - L54 W52 H36cmShaker Platform - 45.5 x 45.5cm Tube stand inside holds 20 x 50ml tubes

This Jouan Water Jacketed Incubator Model IG150 was removed from a university lab where it was surpl (more)us to requirements. This was removed from a university lab where it was surplus to requirements. The unit powers up and has been tested with both a temp and CO2 sensor (not included). It is in good working order but will require calibration upon installation. It is in good cosmetic condition with minor marks. Internal dimensions are: L41cm x W41cm x H60cm.

This Thermo Scientific Surveyor HPLC System was removed from a university lab where it was surplus t (more)o requirements. Included are; 1 x AutosamplerPart no. SRVYR-AS 1 x MS PumpPart no. SRVYR-MPUMP 1 x PDA Plus DetectorPart no. SRVYR-PDA5P All the components power up but have not been tested further. They are in reasonably good cosmetic condition but have marks from use.

Sartorius Stedim 16374 Calibration Kit & Specially Designed Holder for BioWelder This was remove (more)d from a working lab where it was surplus to requirements. We believe it is new and unused.

Panasonic MDF-DU300H Ultra-Low Temperature Freezer Lab This item was removed from a university where (more) it was surplus to requirement. The unit powers up and is in good working order (thermometer not included). It is in good cosmetic condition.

Shimadzu UV-VIS Spectrophotometer UV-2401PC & TCC Temperature Controller Lab This system was rem (more)oved from a university lab where it was surplus to requirement. All included units are in good cosmetic condition and power on, we are unable to test them further as a system at our facility. This system comprises the following: - Shimadzu UV-2401PC            Serial No. A10834432670 - Shimadzu TCC-240A Temperature Controlled Cell Holder - Shimadzu TCC-Temperature Controller           A103844

This item has just arrived in our stock. Please enquire for further details.

Climacell CLC-B2V-M / CLC 111-TV Cooling Incubator This was removed from a working lab where it was  (more)surplus to requirements. The unit powers up and is in full working order. (Thermometer not included). It is in good cosmetic condition with minor marks.

This Genevac miVac Duo Centrifugal Concentrator was removed from a university lab where it was surpl (more)us to requirements. The unit powers up and is in good working order. The unit is in reasonably good cosmetic condition but has a cosmetic crack in the lid and the seal has split.

Kratos Analytical Axima-CFR Plus MALDI TOF Mass Spectrometer This was removed from a university lab  (more)where it was surplus to requirements. The unit powers up but we were unable to test it further at our facility. It is in excellent cosmetic condition with only minor marks.