All categories

Hermle Z327 Centrifuge Blood Tube Bundle w/ Swing Out Rotor for 1.8-7ml and 8-10ml Tubes Speed Range (more) 200 to 18,000 RPM (4,500 RPM with included rotor) Maximum Capacity 4 x 200ml Warranty 5 Year Manufacturer's Features - Maintenance-free induction drive - Microprocessor with large LCD display - Motor driven lid lock - Automatic radio-frequency rotor identification system (RFID) with over speed protection, immediately upon rotor insertion - Active imbalance identification and cut-off (rotor specific) - A large variety of rotors and accessories - Audible signal at the end of each run with several melody options - Noise level under 63 dBA at max. speed - Manufactured according to international safety regulations, i.e. IEC 61010 - Rotor exchange is easy to handle - Optimized airflow system keeps the samples cool (Z327) - Stainless steel chamber The Hermle Z327 Centrifuge Blood Tube Bundle w/ Swing Out Rotor for 1.8-7ml and 8-10ml Tubes is a high-performance centrifuge capable of speeds ranging from 200 to 18,000 RPM (4,500 RPM with the included rotor), with a maximum RCF of 23,542 x g (3,350 x g with the included rotor). With a maximum capacity of 4 x 200ml, this centrifuge is ideal for a variety of applications in the life sciences, including tissue culture and molecular biology. Its timer allows for up to 99 hours and 59 minutes of operation, with the option for continuous use. The Hermle Z327 also has the ability to store up to 99 programs, making it highly customizable for specific experimental protocols. Both the Z327 and the refrigerated Z327-K offer a wide assortment of rotor options (up to 19), making them ideal for a wide variety of research applications. Rotor exchange between swing out, micro, or high-volume fixed angle rotors is very simple and can be done in a matter of seconds. The Z327-K features rear mounted refrigeration system, optimized for saving space on the lab bench at only 40 cm wide! Interested in additional rotors and/or adapters for this centrifuge? Let us know what size tubes you are spinning, and we can help you find the right rotor and accessories for your application. INCLUDED: The Hermle Z327 Centrifuge Blood Tube Bundle w/ Swing Out Rotor for 1.8-7ml and 8-10ml Tubes includes: - Z327 Centrifuge - Z327-200 4 x 200ml Swing Out Rotor and 4 x Z327-200-BUK Buckets - 2 x Z327-200-A57 8 x 1.8-7ml Blood Tube Inserts for Z327-200-BUK - 2 x Z327-200-A10 7 x 10/15ml Round Inserts for Z327-200-BUK - Power Cord - Operator's Guide - Manufacturer's Documentation - 5 Year Manufacturer's Warranty

Hermle Z327 Centrifuge Speed Range 200 to 18,000 RPM Maximum Capacity 4 x 200ml Warranty 5 Year Manu (more)facturer's Features - Maintenance-free induction drive - Microprocessor with large LCD display - Motor driven lid lock - Automatic radio-frequency rotor identification system (RFID) with over speed protection, immediately upon rotor insertion - Active imbalance identification and cut-off (rotor specific) - A large variety of rotors and accessories - Audible signal at the end of each run with several melody options - Noise level under 63 dBA at max. speed - Manufactured according to international safety regulations, i.e. IEC 61010 - Rotor exchange is easy to handle - Optimized airflow system keeps the samples cool (Z327) - Stainless steel chamber Both the Z327 and the refrigerated Z327-K offer a wide assortment of rotor options (up to 19), making them ideal for a wide variety of research applications. Rotor exchange between swing out, micro, or high-volume fixed angle rotors is very simple and can be done in a matter of seconds. The Z327-K features rear mounted refrigeration system, optimized for saving space on the lab bench at only 40 cm wide! Interested in rotors and/or adapters for this centrifuge? Let us know what size tubes you are spinning, and we can help you find the right rotor and accessories for your application. INCLUDED: The Hermle Z327 Centrifuge includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - 5 Year Manufacturer's Warranty

Hermle Z32-HK Refrigerated CentrifugeFeatures - Brushless induction drive - Microprocessor control - (more) Active imbalance detection and cut-off - Motor driven lid lock - Automatic rotor identifi cation system with over speed protection - Audible signal at the end of each run - Emergency lid lock - Stainless steel chamber - CFC-free refrigeration system (-20° to +40C) - Autoclavable rotors - Diagnostic program - Program memory for 99 programs - Quick-key for short runs - Pre-cooling program - Standstill cooling - 10 acceleration and 10 deceleration rates, possibility of unbreaked deceleration - Permanent indication of preset and actual values - Pre-selection of speed or RCF in steps of 50/10 increments - Pre-selection of running time from 10 sec to 99h 59min or continious - Simple one handed operation Interested in rotors and/or adapters for this centrifuge?Let us know what size tubes you are spinning, and we can help you find the right rotor and accessories for your application. INCLUDED: The Hermle Z32-HK Refrigerated Centrifuge includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - 5 Year Manufacturer's Warranty

Hermle Z307 Centrifuge Microplate Bundle w/ 2 x 3 Microplate Rotor Speed Range 200 to 14,000 RPM (4, (more)500 RPM with included rotor) Maximum Capacity 4 x 200ml (2 x 3 Microplates with included rotor) Warranty 5 Year Manufacturer's Features - Maintenance-free induction drive - Microprocessor with large LCD display - Lid lock - Automatic radio-frequency rotor identification system (RFID) with over speed protection, immediately upon rotor insertion - Active imbalance identification and cut-off (rotor-specific) - Imbalance tolerant drive - A large variety of rotors and accessories - Manufactured according to international safety regulations, i.e. IEC 61010 - Audible signal at the end of each run with several melody options - Rotor exchange is easy to handle - Noise level under 63 dBA at maximum speed - Improved ventilation system keeps samples cool - Stainless steel chamber The Hermle Z307 Centrifuge Microplate Bundle w/ 2 x 3 Microplate Rotor is a powerful and versatile laboratory tool that can handle a wide range of centrifugation tasks. With a speed range of 200 to 14,000 RPM (4,500 RPM with the included rotor) and a maximum RCF of 16,624 x g (2,716 x g with the included rotor), it can accommodate up to 2 x 3 microplates. The centrifuge also features a timer that can be set for up to 99 hours and 59 minutes, as well as the ability to program up to 99 different centrifugation programs. The Z307 compact universal laboratory centrifuge offers a wide range of applications covering clinical, research, and industrial laboratory use. The Z307 offers many accessories, including rotors for microplates and high speed fixed angle rotors for microtubes and centrifuge tubes up to 50 ml. The swing out rotors can load all common tubes such as blood collection tubes,15/50 ml tubes and even 200 ml tubes. This wide range of accessories makes the Z307 laboratory centrifuge indispensable in research laboratories and clinical hospital laboratories. Interested in additional rotors and/or adapters for this centrifuge? Let us know what size tubes you are spinning, and we can help you find the right rotor and accessories for your application. INCLUDED: The Hermle Z307 Centrifuge Microplate Bundle w/ 2 x 3 Microplate Rotor includes: - Z307 Centrifuge - Z326-02MP 2 Place Swing Out Microplate Rotor - Power Cord - Operator's Guide - Manufacturer's Documentation - 5 Year Manufacturer's Warranty

Hermle Z307 Centrifuge Speed Range 200 to 14,000 RPM Maximum Capacity 4 x 200ml Warranty 5 Year Manu (more)facturer's Features - Maintenance-free induction drive - Microprocessor with large LCD display - Lid lock - Automatic radio-frequency rotor identification system (RFID) with over speed protection, immediately upon rotor insertion - Active imbalance identification and cut-off (rotor-specific) - Imbalance tolerant drive - A large variety of rotors and accessories - Manufactured according to international safety regulations, i.e. IEC 61010 - Audible signal at the end of each run with several melody options - Rotor exchange is easy to handle - Noise level under 63 dBA at maximum speed - Improved ventilation system keeps samples cool - Stainless steel chamber The Z307 compact universal laboratory centrifuge offers a wide range of applications covering clinical, research, and industrial laboratory use. The Z307 offers many accessories, including rotors for microplates and high speed fixed angle rotors for microtubes and centrifuge tubes up to 50 ml. The swing out rotors can load all common tubes such as blood collection tubes,15/50 ml tubes and even 200 ml tubes. This wide range of accessories makes the Z307 laboratory centrifuge indispensable in research laboratories and clinical hospital laboratories. Interested in rotors and/or adapters for this centrifuge? Let us know what size tubes you are spinning, and we can help you find the right rotor and accessories for your application. INCLUDED: The Hermle Z307 Centrifuge includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - 5 Year Manufacturer's Warranty

Hermle Z287-A Micro Bundle w/ Plate Rotor and 24 x 1.5/2.0ml Rotor The Z287-A exceeds the limitation (more)s set forth by traditional microcentrifuges which are restricted solely to fixed angle rotors for microtubes. Instead, this compact, next generation model features an expansive line of swing out and fixed angle rotors options that accept microplates and test-tubes up to 50ml. We’ve designed this centrifuge to be our most compact and economical. A true workhorse for any lab requiring a centrifuge that can accommodate many fields of research. Along with a broad range of available rotor options, the Z287-A introduces a convenient status indicator. Users can easily view the current state of the centrifuge from across the room. The LED illuminates to signify if the rotor is spinning, the run is completed or the centrifuge is idle in standby mode. Advanced microprocessor controls allow for instant rotor identification, which automatically converts the rotational speed to the relevant g-force (rcf), preventing the user from setting a speed above the capabilities of the installed rotor. In addition to retrieving saved programs, the EZ-Scroll touch wheel front panel can adjust accel/decel rates, and change the end of run alarm tone. Additionally this feature prevents debris buildup, leakage, and can be operated with gloves on. The Z287-A is a truly powerful and versatile centrifuge perfect for any research laboratory. INCLUDED: The Hermle Z287-A Micro Bundle w/ Plate Rotor and 24 x 1.5/2.0ml Rotor includes: - Z287-A Centrifuge - 2 x Microplate Swing out Rotor - 18 x 1.5/2.0ml Rotor - Power Cord - Operator's Guide - Manufacturer Documentation - 5 Year Manufacturer's Warranty

Hermle Z287-A Compact Universal Centrifuge The Z287-A exceeds the limitations set forth by tradition (more)al microcentrifuges which are restricted solely to fixed angle rotors for microtubes. Instead, this compact, next generation model features an expansive line of swing out and fixed angle rotors options that accept microplates and test-tubes up to 50ml. We’ve designed this centrifuge to be our most compact and economical. A true workhorse for any lab requiring a centrifuge that can accommodate many fields of research. Along with a broad range of available rotor options, the Z287-A introduces a convenient status indicator. Users can easily view the current state of the centrifuge from across the room. The LED illuminates to signify if the rotor is spinning, the run is completed or the centrifuge is idle in standby mode. Advanced microprocessor controls allow for instant rotor identification, which automatically converts the rotational speed to the relevant g-force (rcf), preventing the user from setting a speed above the capabilities of the installed rotor. In addition to retrieving saved programs, the EZ-Scroll touch wheel front panel can adjust accel/decel rates, and change the end of run alarm tone. Additionally this feature prevents debris buildup, leakage, and can be operated with gloves on. The Z287-A is a truly powerful and versatile centrifuge perfect for any research laboratory. INCLUDED: The Hermle Z287-A Compact Universal Centrifuge includes: - Power Cord - Operator's Guide - Manufacturer Documentation - 5 Year Manufacturer's Warranty

Hermle Z216 MK Refrigerated Centrifuge w/ COMBI-RotorFeatures - Designed to be compact, quiet, and p (more)owerful - Features high speeds up to 15,000 RPM and 21,631 x g - Program storage for up to 99 programs - 10 acceleration and 10 deceleration rates - Timer function up to 99 hours, 59 minutes or continuous operation - Imbalance identification system with automatic shut-off - Maintenance free induction drive - Motor driven safety-lid lock - "K" models feature a powerful CFC-free refrigeration system with a temperature range of -20°C to 40°C - "K" models also feature a pre-cooling function and reaches 4°C from room temperature in less than 10 minutes Features an easy to use control panel with the ability to display RPM/RCF, adjust acceleration/deceleration rates, change alarm tones, and much more The Z216 Series benefits directly from the versatility of 11 available rotor options for tube sizes between 0.2ml and 5ml Despite a remarkably small footprint in the lab, the Z216 series can nearly double the capacity of traditional microcentrifuges Compact, quiet, and powerful are just a few of the features found on the Z216 series microcentrifuges. Add to this, the versatility of eight available rotor options, and the result is the ideal microcentrifuge for the modern molecular biology laboratory. All common microtubes (0.2ml, 0.5ml, 1.5ml, 2.0ml) can be accepted as well as PCR strips, hematocrit tubes, and even 5.0ml centrifuge tubes. Advanced microprocessor controls allow for setting/displaying of the rotational speed in either rpm or rcf. In addition to retrieving saved programs, the easy to use front panel can adjust accel/decel rates, and change the end of run alarm tone. Despite a remarkably small footprint, the Z216 series offers a uniquely designed 44 x 1.5ml dual row rotor, nearly doubling the capacity when compared to traditional microcentrifuges. In the Z216-MK model a powerful, compressor driven cooling system maintains temperatures as low as -20C and is designed to reach 4C (from room temperature) in less than 10 minutes. Interested in rotors and/or adapters for this centrifuge? Let us know what size tubes you are spinning, and we can help you find the right rotor and accessories for your application. INCLUDED: The Hermle Z216 MK Refrigerated Centrifuge w/ COMBI-Rotor includes: - COMBI-Rotor with Quick-Seal lid for 24 x 1.5/2.0ml and 4 x PCR strips - Power Cord - Operator's Guide - Manufacturer's Documentation - 5 Year Manufacturer's Warranty

Hermle Z216 MK Refrigerated Centrifuge w/ 44 Place RotorFeatures - Brushless induction drive - Micro (more)processor control - Active imbalance detection and cut-off - Motor driven lid lock - Emergency lid lock - Stainless steel chamber - CFC-free refrigeration system (-20° to +40°C) - Diagnostic program - Program memory for 99 programs - Quick-key for short runs - Pre-cooling program - Standstill cooling - 10 acceleration and 10 deceleration rates, possibility of unbreaked deceleration - Permanent indication of preset and actual values - Pre-selection of speed or RCF in steps of 50/10-er - Pre-selection of running time from 10 sec to 99h 59min or continious - Simple one handed operation Compact, quiet, and powerful are just a few of the features found on the Z216 series microcentrifuges. Add to this, the versatility of eight available rotor options, and the result is the ideal microcentrifuge for the modern molecular biology laboratory. All common microtubes (0.2ml, 0.5ml, 1.5ml, 2.0ml) can be accepted as well as PCR strips, hematocrit tubes, and even 5.0ml centrifuge tubes. Advanced microprocessor controls allow for setting/displaying of the rotational speed in either rpm or rcf. In addition to retrieving saved programs, the easy to use front panel can adjust accel/decel rates, and change the end of run alarm tone. Despite a remarkably small footprint, the Z216 series offers a uniquely designed 44 x 1.5ml dual row rotor, nearly doubling the capacity when compared to traditional microcentrifuges. In the Z216-MK model a powerful, compressor driven cooling system maintains temperatures as low as -20C and is designed to reach 4C (from room temperature) in less than 10 minutes. Interested in rotors and/or adapters for this centrifuge? Let us know what size tubes you are spinning, and we can help you find the right rotor and accessories for your application. INCLUDED: The Hermle Z216 MK Refrigerated Centrifuge w/ 44 Place Rotor includes: - 44 x 1.5/2.0ml Rotor - Power Cord - Operator's Guide - Manufacturer's Documentation - 5 Year Manufacturer's Warranty

Hermle Z216 MK Refrigerated CentrifugeFeatures - Brushless induction drive - Microprocessor control  (more)- Active imbalance detection and cut-off - Motor driven lid lock - Emergency lid lock - Stainless steel chamber - CFC-free refrigeration system (-20° to +40°C) - Diagnostic program - Program memory for 99 programs - Quick-key for short runs - Pre-cooling program - Standstill cooling - 10 acceleration and 10 deceleration rates, possibility of unbreaked deceleration - Permanent indication of preset and actual values - Pre-selection of speed or RCF in steps of 50/10-er - Pre-selection of running time from 10 sec to 99h 59min or continious - Simple one handed operation Compact, quiet, and powerful are just a few of the features found on the Z216 series microcentrifuges. Add to this, the versatility of eight available rotor options, and the result is the ideal microcentrifuge for the modern molecular biology laboratory. All common microtubes (0.2ml, 0.5ml, 1.5ml, 2.0ml) can be accepted as well as PCR strips, hematocrit tubes, and even 5.0ml centrifuge tubes. Advanced microprocessor controls allow for setting/displaying of the rotational speed in either rpm or rcf. In addition to retrieving saved programs, the easy to use front panel can adjust accel/decel rates, and change the end of run alarm tone. Despite a remarkably small footprint, the Z216 series offers a uniquely designed 44 x 1.5ml dual row rotor, nearly doubling the capacity when compared to traditional microcentrifuges. In the Z216-MK model a powerful, compressor driven cooling system maintains temperatures as low as -20C and is designed to reach 4C (from room temperature) in less than 10 minutes. Interested in rotors and/or adapters for this centrifuge? Let us know what size tubes you are spinning, and we can help you find the right rotor and accessories for your application. INCLUDED: The Hermle Z216 MK Refrigerated Centrifuge includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - 5 Year Manufacturer's Warranty

Hermle Z216 M Centrifuge w/ COMBI-RotorFeatures - Brushless induction drive - Microprocessor control (more) - Active imbalance detection and cut-off - Motor driven lid lock - Emergency lid lock - Air cooling - Diagnostic program - Program memory for 99 programs - Quick-key for short runs - 10 acceleration and 10 deceleration rates, possibility of unbreaked deceleration - Permanent indication of preset and actual values - Pre-selection of speed or RCF in steps of 50/10-er - Pre-selection of running time from 10 sec to 99h 59min or continious - Simple one handed opertaion Compact, quiet, and powerful are just a few of the features found on the Z216 series microcentrifuges. Add to this, the versatility of eight available rotor options, and the result is the ideal microcentrifuge for the modern molecular biology laboratory. All common microtubes (0.2ml, 0.5ml, 1.5ml, 2.0ml) can be accepted as well as PCR strips, hematocrit tubes, and even 5.0ml centrifuge tubes. Advanced microprocessor controls allow for setting/displaying of the rotational speed in either rpm or rcf. In addition to retrieving saved programs, the easy to use front panel can adjust accel/decel rates, and change the end of run alarm tone. Despite a remarkably small footprint, the Z216 series offers a uniquely designed 44 x 1.5ml dual row rotor, nearly doubling the capacity when compared to traditional microcentrifuges. Interested in rotors and/or adapters for this centrifuge? Let us know what size tubes you are spinning, and we can help you find the right rotor and accessories for your application. INCLUDED: The Hermle Z216 M Centrifuge w/ COMBI-Rotor includes: - COMBI-Rotor with Quick-Seal lid for 24 x 1.5/2.0ml and 4 x PCR strips - Power Cord - Operator's Guide - Manufacturer's Documentation - 5 Year Manufacturer's Warranty

Hermle Z216 M Centrifuge w/ 44 Place RotorFeatures - Brushless induction drive - Microprocessor cont (more)rol - Active imbalance detection and cut-off - Motor driven lid lock - Emergency lid lock - Air cooling - Diagnostic program - Program memory for 99 programs - Quick-key for short runs - 10 acceleration and 10 deceleration rates, possibility of unbreaked deceleration - Permanent indication of preset and actual values - Pre-selection of speed or RCF in steps of 50/10-er - Pre-selection of running time from 10 sec to 99h 59min or continious - Simple one handed opertaion Compact, quiet, and powerful are just a few of the features found on the Z216 series microcentrifuges. Add to this, the versatility of eight available rotor options, and the result is the ideal microcentrifuge for the modern molecular biology laboratory. All common microtubes (0.2ml, 0.5ml, 1.5ml, 2.0ml) can be accepted as well as PCR strips, hematocrit tubes, and even 5.0ml centrifuge tubes. Advanced microprocessor controls allow for setting/displaying of the rotational speed in either rpm or rcf. In addition to retrieving saved programs, the easy to use front panel can adjust accel/decel rates, and change the end of run alarm tone. Despite a remarkably small footprint, the Z216 series offers a uniquely designed 44 x 1.5ml dual row rotor, nearly doubling the capacity when compared to traditional microcentrifuges. Interested in rotors and/or adapters for this centrifuge? Let us know what size tubes you are spinning, and we can help you find the right rotor and accessories for your application. INCLUDED: The Hermle Z216 M Centrifuge w/ 44 Place Rotor includes: - 44 x 1.5/2.0ml Rotor - Power Cord - Operator's Guide - Manufacturer's Documentation - 5 Year Manufacturer's Warranty

Hermle Z216 M CentrifugeFeatures - Brushless induction drive - Microprocessor control - Active imbal (more)ance detection and cut-off - Motor driven lid lock - Emergency lid lock - Air cooling - Diagnostic program - Program memory for 99 programs - Quick-key for short runs - 10 acceleration and 10 deceleration rates, possibility of unbreaked deceleration - Permanent indication of preset and actual values - Pre-selection of speed or RCF in steps of 50/10-er - Pre-selection of running time from 10 sec to 99h 59min or continious - Simple one handed opertaion Compact, quiet, and powerful are just a few of the features found on the Z216 series microcentrifuges. Add to this, the versatility of eight available rotor options, and the result is the ideal microcentrifuge for the modern molecular biology laboratory. All common microtubes (0.2ml, 0.5ml, 1.5ml, 2.0ml) can be accepted as well as PCR strips, hematocrit tubes, and even 5.0ml centrifuge tubes. Advanced microprocessor controls allow for setting/displaying of the rotational speed in either rpm or rcf. In addition to retrieving saved programs, the easy to use front panel can adjust accel/decel rates, and change the end of run alarm tone. Despite a remarkably small footprint, the Z216 series offers a uniquely designed 44 x 1.5ml dual row rotor, nearly doubling the capacity when compared to traditional microcentrifuges. Interested in rotors and/or adapters for this centrifuge? Let us know what size tubes you are spinning, and we can help you find the right rotor and accessories for your application. INCLUDED: The Hermle Z216 M Centrifuge includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - 5 Year Manufacturer's Warranty

Hermle Z207-M Centrifuge w/ 24 x 1.5/2.0ml Rotor Due to the compact design, the Microlitre Centrifug (more)e Z207-M, is applicable even in the smallest laboratory setting. There are two rotors available, the 24-place microlitre rotor either with snap-on lid or hermetically sealed lid, and the rotor for Spin Column Kits. Of particular note is the innovative control panel with Touch-function. FeaturesMicroprocessor with large LCD displayElectrical lid lockPre-selection of the rotor typeQuick access to samplesActive imbalance identification and cut-offAir Cooling SystemQuick Acceleration and DecelerationNoise level < 60 dBA at max. speedEasy rotor exchangeManufactured in accordance to InternationalSafety Regulations, i.e. IEC 61010Quick acceleration and deceleration within 13 seconds Distinct Control PanelControl panel with Touch-OperationSimple one-handed operationEasy to program with gloves onSplash-proof foil keyboardPermanent indication of pre-set and actual valuesSelection of speed in both rpm and g-force, in increments of 1010 acceleration and deceleration rates, possibility of unbraked decelerationPre-selection of the running time, from 10 s to 99 h 59 min or continuousStorage of up to 99 runs, including rotorQuick-key for short runs Interested in rotors and/or adapters for this centrifuge? Let us know what size tubes you are spinning, and we can help you find the right rotor and accessories for your application. INCLUDED: The Hermle Z207-M Centrifuge includes: - 24 x 1.5/2.0ml Rotor - Power Cord - Operator's Guide - Manufacturer's Documentation - 5 Year Manufacturer's Warranty

Hermle Z207-M Centrifuge Due to the compact design, the Microlitre Centrifuge Z207-M, is applicable  (more)even in the smallest laboratory setting. There are two rotors available, the 24-place microlitre rotor either with snap-on lid or hermetically sealed lid, and the rotor for Spin Column Kits. Of particular note is the innovative control panel with Touch-function. FeaturesMicroprocessor with large LCD displayElectrical lid lockPre-selection of the rotor typeQuick access to samplesActive imbalance identification and cut-offAir Cooling SystemQuick Acceleration and DecelerationNoise level < 60 dBA at max. speedEasy rotor exchangeManufactured in accordance to InternationalSafety Regulations, i.e. IEC 61010Quick acceleration and deceleration within 13 seconds Distinct Control PanelControl panel with Touch-OperationSimple one-handed operationEasy to program with gloves onSplash-proof foil keyboardPermanent indication of pre-set and actual valuesSelection of speed in both rpm and g-force, in increments of 1010 acceleration and deceleration rates, possibility of unbraked decelerationPre-selection of the running time, from 10 s to 99 h 59 min or continuousStorage of up to 99 runs, including rotorQuick-key for short runs Interested in rotors and/or adapters for this centrifuge? Let us know what size tubes you are spinning, and we can help you find the right rotor and accessories for your application. INCLUDED: The Hermle Z207-M Centrifuge includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - 5 Year Manufacturer's Warranty

Hermle Z207-3202 4 x 8 PCR Strip Rotor (for Z207-M only) The Hermle Z207-3202 4 x 8 PCR Strip Rotor  (more)(for Z207-M only) is for use with Hermle Z207-M Centrifuge. This rotor has a maximum speed of 13,500 RPM, and a maximum capacity of 4 x 8-PCR Strips. INCLUDED: The Hermle Z207-3202 4 x 8 PCR Strip Rotor (for Z207-M only) includes: - Hermle Z207-3202 4 x 8 PCR Strip Rotor - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Hermle Z206-A Centrifuge w/ 6 x 50ml RotorFeatures - Microprocessor control - Active imbalance detec (more)tion and cut-off - One-hand closing - Emergency lid lock - Air cooling - autoclavable rotors - Diagnostic program - 10 acceleration and 10 deceleration rates, possibility of unbreaked deceleration - Permanent indication of preset and actual values - Pre-selection of speed or RCF in steps of 50/10-er - Pre-selection of running time from 10 sec to 99h 59min or continious - Simple one handed opertaion The Z206-A Compact Centrifuge is suitable for a variety of applications inside both the clinical and research setting. Three angle rotor options are available permitting use with all common tube sizes from 0.2ml to 50ml. A unique 6 x 50ml swing out rotor is also available for clinical applications requiring horizontal separation within 5ml blood collection tubes. The advanced microprocessor controls feature an ergonomic turn knob that controls all settings (time, speed, accel/decel levels, etc.). The speed can be adjusted from 200 rpm up to a maximum speed of 6,000 rpm (corresponding to 4,427 xg) in the popular 50ml and 15ml rotors. The centrifuge lid features and automatic lid-lock that prevents it from being opened while the rotor is still in motion. In addition, a unique imbalance detection system is designed to automatically power down the motor in the event of improper loading of the rotor or any tube breakage. Compact, quiet, and versatile are just a few of the features found in the Z206-A centrifuge. Add to this, the proven safety features, and the result is the ideal centrifuge for a variety of clinical and molecular biology applications. Interested in rotors and/or adapters for this centrifuge? Let us know what size tubes you are spinning, and we can help you find the right rotor and accessories for your application. INCLUDED: The Hermle Z206-A Centrifuge w/ 6 x 50ml Rotor includes: - 6 x 50ml Rotor - Power Cord - Operator's Guide - Manufacturer's Documentation - 5 Year Manufacturer's Warranty

Hermle Z206-A Centrifuge Max Capacity 6 x 50 ml Max. RPM/RCF 6,000 | 4,427 x g Running Time 59 min  (more)50s / 10s increments Five Year Warranty Five Year Warranty Five Year Warranty Five Year Warranty -->Features - Microprocessor control - Active imbalance detection and cut-off - One-hand closing - Emergency lid lock - Air cooling - autoclavable rotors - Diagnostic program - 10 acceleration and 10 deceleration rates, possibility of unbreaked deceleration - Permanent indication of preset and actual values - Pre-selection of speed or RCF in steps of 50/10-er - Pre-selection of running time from 10 sec to 99h 59min or continious - Simple one handed opertaion The Z206-A Compact Centrifuge is suitable for a variety of applications inside both the clinical and research setting. Three angle rotor options are available permitting use with all common tube sizes from 0.2ml to 50ml. A unique 6 x 5ml swing out rotor is also available for clinical applications requiring horizontal separation within 5ml blood collection tubes. The advanced microprocessor controls feature an ergonomic turn knob that controls all settings (time, speed, accel/decel levels, etc.). The speed can be adjusted from 200 rpm up to a maximum speed of 6,000 rpm (corresponding to 4,427 xg) in the popular 50ml and 15ml rotors. The centrifuge lid features and automatic lid-lock that prevents it from being opened while the rotor is still in motion. In addition, a unique imbalance detection system is designed to automatically power down the motor in the event of improper loading of the rotor or any tube breakage. Compact, quiet, and versatile are just a few of the features found in the Z206-A centrifuge. Add to this, the proven safety features, and the result is the ideal centrifuge for a variety of clinical and molecular biology applications. Interested in rotors and/or adapters for this centrifuge? Let us know what size tubes you are spinning, and we can help you find the right rotor and accessories for your application. INCLUDED: The Hermle Z206-A Centrifuge includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - 5 Year Manufacturer's Warranty

Hermle Z167M Microcentrifuge, includes 18 x 1.5/2.0ml rotorThe Z167-M Microcentrifuge is a powerful, (more) compact, easy-to-use high speed microcentrifuge for labs looking to save valuable bench space, but not compromise on speed and power.

Hermle SIEVA-3-TC Filtration Centrifuge with external temperature control The SIEVA-3 Filtration Cen (more)trifuge is the perfect centrifuge for cake filtration. The powerful SIEVA-3 reaches speeds up to 10,000rpm/7,825 xg, and features a transparent viewing port in the lid for close monitoring of samples. The stainless steel housing and parts makes the SIEVA-3 corrosion resistant, and easy to clean. Optional 500ml filtration baskets are available in both perorated and non perforated. Clarified liquids exit the unit via the drain located on the side of the unit. Advanced microprocessor controls allow for setting/displaying of the rotational speed in either rpm or rcf. In addition to retrieving saved programs, the easy to use front panel can adjust accel/decel rates, and change the end of run alarm tone. INCLUDED: The Hermle SIEVA-3-TC Filtration Centrifuge with external temperature control includes: - Z600-500-P 500ml Centrifugal Basket, Perforated - Power Cord - Operator's Guide - Manufacturer's Documentation - 5 Year Manufacturer's Warranty

Hermle SIEVA-3 Filtration Centrifuge The SIEVA-3 Filtration Centrifuge is the perfect centrifuge for (more) cake filtration. The powerful SIEVA-3 reaches speeds up to 10,000rpm/7,825 xg, and features a transparent viewing port in the lid for close monitoring of samples. The stainless steel housing and parts makes the SIEVA-3 corrosion resistant, and easy to clean. Optional 500ml filtration baskets are available in both perorated and non perforated. Clarified liquids exit the unit via the drain located on the side of the unit. Advanced microprocessor controls allow for setting/displaying of the rotational speed in either rpm or rcf. In addition to retrieving saved programs, the easy to use front panel can adjust accel/decel rates, and change the end of run alarm tone. INCLUDED: The Hermle SIEVA-3 Filtration Centrifuge includes: - Z600-500-P 500ml Centrifugal Basket, Perforated - Power Cord - Operator's Guide - Manufacturer's Documentation - 5 Year Manufacturer's Warranty

Hermle Round buckets for Z446-750-AC 2/pk The Hermle round buckets for Z446-750-AC 2/pk are an essen (more)tial accessory for the Hermle Z446-1000 / Z446-100-AC centrifuge rotors. Each bucket has a maximum capacity of 750ml, making it ideal for a wide range of sample processing applications. With a maximum speed of 4,000 RPM (4,500 RPM with K model only) and a maximum RCF of 3,434 x g (4,346 x g with K model only), these buckets are capable of high-speed separations, ensuring efficient processing of samples. The maximum radius of the buckets is 19.2 cm, which helps to ensure optimal separation of samples during centrifugation. These round buckets are designed specifically for use with the Hermle Z446-1000 / Z446-100-AC rotors, providing a reliable and efficient solution for laboratories using these rotors for sample processing. INCLUDED: The Hermle Round buckets for Z446-750-AC 2/pk includes: - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Hermle Rectangular buckets for Z446-750-AC 2/pk Introducing the Z446-MP-BUK rectangular buckets for  (more)microplates, designed to work in conjunction with the Hermle Z446-750-AC rotor. These buckets are constructed to provide maximum versatility for your laboratory's sample processing needs, accommodating a range of microplate sizes and types. With acceleration and deceleration times of 55/551 and 54/1,501 seconds respectively, and maximum speeds of up to 4,500 RPM with a max RCF of 3,961 xg, these buckets can handle a wide range of sample types and volumes. They feature a max radius of 17.5 cm and a max loading height of 80 mm, providing ample space for your microplates and other sample containers. The Z446-MP-BUK rectangular buckets are made with durable materials, ensuring long-lasting performance and reliability. They feature a max loading weight of 640 g, making them suitable for a variety of sample types. These buckets also have a temperature limit of 4°C at maximum speed, ensuring the safety and stability of your samples during centrifugation. When used together with the Hermle Z446-750-AC rotor, the Z446-MP-BUK rectangular buckets provide a seamless and secure fit, ensuring optimal sample processing results. Upgrade your laboratory's sample processing capabilities with the Hermle Z446-MP-BUK rectangular buckets for microplates and experience the exceptional quality and reliability that Hermle is known for! INCLUDED: The Hermle Rectangular buckets for Z446-750-AC 2/pk includes: - Operator's Manual - Manufacturer's Warranty

Hermle Rectangular bucket for Z496-1000-AC 2/pk The Hermle Rectangular bucket for Z496-1000-AC comes (more) in a pack of two and is designed to work with the Hermle Z496-1000 and Z496-100-AC rotors. The bucket can hold up to 750ml of sample volume and can handle a maximum speed of 4,200 RPM, as well as a maximum relative centrifugal force (RCF) of 3,964 x g. The rectangular shape of the bucket ensures efficient use of space, allowing for higher sample capacity per run. This bucket is made of durable materials and can withstand high speeds and centrifugal forces, making it a reliable and long-lasting accessory for a variety of centrifugation applications in research and clinical laboratories. INCLUDED: The Hermle Rectangular bucket for Z496-1000-AC 2/pk includes: - Manufacturer's Documentation - 2 Year Manufacturer's Warranty