All categories

RCT basic ETS-D5 Solution Speed Range 50 to 1,500 rpm Temperature Setting Range 0 - 310 °C Setting a (more)ccuracy speed 10 rpm Features - Combines RCT basic magnetic stirrer with ETS-D5 contact thermometer. - Safety circuit limits max. temp. independently of set point. - Heating function switches off if temp. limit exceeded. - Set safety temp. of heating plate remains available. - Hotplate temp. displayed on RCT. - Contact thermometer display can be placed at eye level. The RCT basic ETS-D5 Solution consists of the RCT basic magnetic stirrer and the ETS-D5 electronic contact thermometer making experiments and reactions even safer. Improved temperature controlBy combining the two devices, the internal safety circuit, which is independent of the RCT basic software, can be addressed directly by the contact thermometer. For this purpose, the maximum permissible temperature in the medium is limited independently of the set point temperature. If this value is exceeded, the heating function of the magnetic stirrer switches off via the internal safety circuit - until the device is restarted. At the same time, the stirring function is maintained to avoid boiling distortions. The set safety temperature of the heating plate also remains available. The set temperature limitation of the ETS-D5 and the safety temperature of the hotplate are OR-linked. This means that every potential error leads to the heating being switched off. In addition, the temperature of the heating plate can be set independently of the medium. In this way, you actively influence the heating times. Improved displayWith the ETS-D5, you also enhance the display of your magnetic stirrer. You can see the set and actual value of the medium temperature at a glance with a resolution of 0.1 K on the contact thermometer. The setting accuracy is also refined from 1 K to 0.1 K in this combination. The current hotplate temperature is also displayed on the RCT. Another plus: The display of the contact thermometer can be placed at eye level. This makes it directly visible where the temperature is measured and controlled. In addition to the magnetic stirrer and contact thermometer, the complete solution also includes all the necessary mounting elements.INCLUDED: The RCT basic ETS-D5 Solution includes: - H 16 V Support rod - H 44 Boss head clamp - Screw driver - ETS-D5 - PT 1000.60 Temperature sensor, stainless steel - H 38 Holding rod - RCT basic - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

IKA RCT 5 Digital Magnetic Hotplate Stirrer Speed Range 50 - 1500 rpm Temperature Setting Range 0 (more) - 310 °C Heat Output 850 Watts Features - The new magnetic stirrer RCT 5 digital boasts 850 W of power, ideal for demanding stirring tasks up to 20 liters. - Features a multifunctional menu for customized stirring operations. - Enables programming of rotation direction, timer functions, and sequence programming for a tailored stirring process from start to finish. - Equipped with a scratch-resistant ceramic coating on a rectangular set-up plate, offering enhanced durability compared to conventional magnetic stirrer plates. - Employs a display made of chemical resistant and hardened glass for increased user safety. - Enhanced safety with a display symbol warning of hot surface, alongside an adjustable safety circuit up to 370 °C. The new magnetic stirrer RCT 5 digital with 850 W offers significantly more power making it an ideal device for demanding stirring tasks up to 20 l.Multifunctional menu - Whether determining the direction of rotation, timer functions or sequence programming - the stirring process can be programmed individually from beginning to end. In this way, the reaction runs reliably and safely even without monitoring. Scratch-resistant ceramic coating - RCT 5 digital has a rectangular set-up plate with a white, ceramic coating. It is less scratch-prone than conventional magnetic stirrer plates. Safety features - The display is made of chemical resistant and hardened glass which increases the safety of the user. In addition, a symbol in the display warns in case of a hot surface and therefore protects from burnings. The safety circuit can be adjusted up to 370 °C. INCLUDED: The IKA RCT 5 Digital Magnetic Hotplate Stirrer includes: - RCT 5 digital - PT 1000.60 Temperature sensor, stainless steel - IKAFLON® 30 Magnetic stirring bar - IKAFLON® 40 Magnetic stirring bar - Screw driver - USB cable - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer Warranty (+ Additional Free 8 Year Warranty Extension with IKA Registration) IKA RCT 5 Digital Magnetic Hotplate Stirrer Specifications Number of stirring positions1Stirring quantity max. per stirring position (H2O)20 lMotor rating output9 WDirection of rotationright / leftSpeed display set-valueLCDSpeed display actual-valueLCDSpeed controlTurning knobSpeed range50 - 1500 rpmSetting accuracy speed 10 rpmStirring bar length 30 - 80 mmSelf-heating of the set-up plate by max. stirring (RT:22°C/duration:1h) 13 +KHeat output850 WTemperature display set-valueLCDTemperature display actual-valueLCDTemperature unit°C / °FHeating temperature rangeRoom temp. + device self heating - 310 °CHeat controlTurning knobTemperature setting range0 - 310 °CTemperature setting resolution of heating plate1 KConnection for ext. temperature sensorPT1000, ETS-D5, ETS-D6Temperature setting resolution of medium1 KAdjustable safety circuit50 - 370 °CSet-up plate materialAluminum with ceramic coatingSet-up plate dimensions137 x 137 mmAutomatic reverse rotationyesIntermittent modeyesViscosity trend measurementyesTimeryesTimer displayLCDTime setting min.1 sTime setting max.143940 minSensor in medium detection (Error 5)yesSpeed deviation (no load,nominal voltage, at 1500rpm + 25 °C)2 ±%Heating rate (1l H2O in H1500)7.5 K/minHeat control accuracy of heating plate (at 100°C)5 ±KHeat control accuracy with ext. PT1000 (500ml H2O in 600ml beaker,40mm stirring bar,600rpm,50°C)0.5 ±KHeat control accuracy with ETS-D5 (500ml H2O in 600ml beaker,40mm stirring bar,600rpm,50°C)0.5 ±KHeat control accuracy with ETS-D6 (500ml H2O in 600ml beaker,40mm stirring bar,600rpm,50°C)0.2 ±KDimensions (W x H x D)160 x 85 x 270 mmWeight2.6 kgPermissible ambient temperature5 - 40 °CPermissible relative humidity80 %Protection class according to DIN EN 60529IP 42RS 232 interfaceyesUSB interfaceyesVoltage 115 VFrequency50/60 HzPower input900 WPower input standby1.6 W

IKA RC 5 basic Recirculating Chiller, basic Working Temp. -30°C to Room Temp. Pump Pressure Max. 0.6 (more)1 bar Flow Rate Max. 31 l/min Features - Speed-controlled refrigeration system with 1400 W cooling capacity (@20°C) - Natural thermofluid R290 - Designed for cooling applications up to -30°C - RT - Extended operating temperature range until 80°C - Excellent temperature stability of about ± 0,1K (@-10°C) - Speed-controlled pump made of PEEK: (0,6 bar; 31l/min) - Digital level indicator This energy-efficient chiller is operated with an eco-friendly refrigerant and reaches a high power density. This results in a comparatively small working space in the lab. The speed-controlled PEEK pump allows an indirect, continuous adjustment of the maximum pressure and flow rate. Due to its excellent temperature stability of about ± 0,1 K, the RC 5 can handle even sophisticated applications. The isolated, high-quality 7l bath has an integrated hopper and drain valve, ensuring a safe and clean handling of the thermofluid. A hose can be connected to empty the bath in order to avoid direct contact with the thermofluid. The easy-to-open front flap allows an easy cleaning of the cooling unit’s air filter.INCLUDED: The IKA RC 5 basic Recirculating Chiller, basic includes: - Hose olive NW 8 (2 pcs.) - Hose olive NW 12 (2 pcs.) - USB Cable - USB A to Micro-B, 2 m - Power Cord - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

IKA R 3004.2 Blade stirrer Maximum Speed ≤ 1000 rpm Flow Type Radial Material Stainless Steel Featur (more)es - Generates radial flow for effective top and bottom mixing - Ideal for aerating low viscosity media and homogenizing solids in liquids - Suitable for medium to high-speed mixing tasks - Constructed from AISI 316L / 1.4571 stainless steel for long-lasting durability - Operates effectively within an ambient temperature range of 5 - 40 °C The R 3004.2 Blade Stirrer is designed to create a radial flow, adeptly mixing materials from both the top and bottom, making it exceptionally suited for aerating low viscosity media and homogenizing solids in liquids. With a significant 70 mm stirrer diameter and an 819 mm shaft length, this tool is perfect for reaching into deep vessels and ensuring thorough mixing across a variety of applications. Constructed from AISI 316L / 1.4571 stainless steel, it stands as a durable and reliable choice for any laboratory setting.INCLUDED: The IKA R 3004.2 Blade stirrer includes: - IKA R 3004.2 Blade stirrer - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

IKA R 3004.1 Blade stirrer Maximum Speed ≤ 1000 rpm Flow Type Radial Material Stainless Steel Featur (more)es - Generates radial flow for efficient mixing from both top and bottom - Suitable for aerating low viscosity media and homogenizing solids in liquids - Designed for use at medium to high speeds for diverse applications - Constructed from AISI 316L / 1.4571 stainless steel for durability and corrosion resistance - Operable within an ambient temperature range of 5 - 40 °C for versatile lab environments The R 3004.1 Blade Stirrer is specifically engineered to create a radial flow, effectively mixing materials from both the top and bottom for comprehensive results. Ideal for aerating low viscosity media and homogenizing solids in liquids, it's suited for medium to high-speed applications across a broad spectrum of laboratory uses. Featuring a 50 mm stirrer diameter and a 565 mm shaft length, this stirrer is made from AISI 316L / 1.4571 stainless steel, ensuring durability and longevity. Designed to operate within an ambient temperature range of 5 - 40 °C, it offers a perfect blend of functionality and practicality for professional settings.INCLUDED: The IKA R 3004.1 Blade stirrer includes: - IKA R 3004.1 Blade stirrer - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

IKA R 3004 Blade stirrer Maximum Speed ≤ 1000 rpm Flow Type Radial Material Stainless Steel Features (more) - Generates radial flow, effectively mixing material from both top and bottom - Ideal for aerating low viscosity media and homogenizing solids in liquids - Designed for medium to high speed use for versatile application needs - Compact stirrer diameter of 30 mm for focused and efficient mixing - Made from AISI 316L / 1.4571 stainless steel for superior durability and corrosion resistance - Suitable for use within a wide ambient temperature range of 5 - 40 °C, ensuring reliability under various conditions This stirrer is equipped with a 50 mm diameter and a 350 mm shaft length, designed to create an axial flow that moves media from the bottom upwards, suitable for mixing and heat exchange in medium to high viscosity substances. Constructed from AISI 316L / 1.4571 stainless steel, it offers durability and resistance to corrosion. With a weight of 0.2256 kg and an overall height of 87.7 mm, it is built for stability and ease of integration into various lab environments. The stirrer is intended for low to medium speed applications, with a maximum operational speed of ≤ 800 rpm and can be used within an ambient temperature range of 5 - 40 °C.INCLUDED: The IKA R 3004 Blade stirrer includes: - IKA R 3004 Blade stirrer - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

IKA R 3003.2 Spiral stirrer Maximum Speed ≤ 800 RPM Flow Type Axial Flow Material Stainless Steel Fe (more)atures - Generates axial flow for efficient medium conveyance from the bottom upwards - Ideal for homogeneous mixing and heat exchange with medium to high viscosity media - Suitable for low to medium speed operations for precise control - Constructed from AISI 316L / 1.4571 stainless steel for superior durability and corrosion resistance - Operates within an ambient temperature range of 5 - 40 °C, versatile for different laboratory conditions This advanced stirrer is crafted to create an axial flow, moving the medium efficiently from the bottom upwards, perfect for mixing and facilitating heat exchange in medium to high viscosity media. Featuring a large 150 mm diameter and an 800 mm shaft, it is constructed from the robust AISI 316L / 1.4571 stainless steel, ensuring durability and resistance to corrosion. Designed to operate at low to medium speeds, it offers unparalleled control for a wide array of laboratory applications. With a height of 244 mm and weighing 1.045 kg, it’s optimized for stability and performance within a permissible ambient temperature range of 5 - 40 °C.INCLUDED: The IKA R 3003.2 Spiral stirrer includes: - IKA R 3003.2 Spiral stirrer - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

IKA R 3003.1 Spiral stirrer Maximum Speed ≤ 800 rpm Flow Type Axial Material Stainless Steel Feature (more)s - Generates axial flow, efficiently conveying medium from the bottom upwards - Optimized for homogeneous mixing and heat exchange in medium to high viscosity media - Ideal for use at low to medium speeds for precise control - Stirrer diameter: 100 mm for effective mixing in larger volumes - Made of AISI 316L / 1.4571 stainless steel, offering high resistance and durability - Operates within a wide ambient temperature range of 5 - 40 °C, versatile for various lab conditions This stirrer is designed to generate an axial flow, directing medium from the bottom upwards for efficient mixing and heat exchange in medium to high viscosity media. With a 100 mm diameter and a 550 mm shaft length, it's constructed from AISI 316L / 1.4571 stainless steel for exceptional durability and corrosion resistance. Suitable for low to medium speed operations, it provides precise control for a wide range of applications. Its robust design, weighing 0.62 kg and measuring 162.8 mm in height, ensures stability and performance within an ambient temperature range of 5 - 40 °C.INCLUDED: The IKA R 3003.1 Spiral stirrer includes: - IKA R 3003.1 Spiral stirrer - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

IKA R 3003 Spiral stirrer Maximum Speed ≤ 800 rpm Flow Type Axial Material Stainless Steel Features  (more)- Constructed from AISI 316L / 1.4571 stainless steel for exceptional durability - Suitable for a broad ambient temperature range of 5 - 40 °C - Generates axial flow, moving medium from the bottom upwards for effective mixing - Ideal for homogeneous mixing and heat exchange in medium to high viscosity media - Designed for use at low to medium speeds, with a maximum speed of ≤ 800 rpm - Stirrer diameter: 50 mm for optimal mixing efficiency This stirrer is equipped with a 50 mm diameter and a 350 mm shaft length, designed to create an axial flow that moves media from the bottom upwards, suitable for mixing and heat exchange in medium to high viscosity substances. Constructed from AISI 316L / 1.4571 stainless steel, it offers durability and resistance to corrosion. With a weight of 0.2256 kg and an overall height of 87.7 mm, it is built for stability and ease of integration into various lab environments. The stirrer is intended for low to medium speed applications, with a maximum operational speed of ≤ 800 rpm and can be used within an ambient temperature range of 5 - 40 °C.INCLUDED: The IKA R 3003 Spiral stirrer includes: - IKA R 3003 Spiral stirrer - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

IKA R 3001.1 Moebius stirrer Maximum Speed ≤ 800 RPM Flow Type Axial Flow Material Stainless Steel F (more)eatures - Generates axial flow, efficiently drawing material from above for effective mixing - Specifically designed for circulating and handling low to medium viscous liquids - Suitable for operation at medium speeds for optimal control - Constructed from AISI 316L / 1.4571 stainless steel for high durability and corrosion resistance - Operates within a permissible ambient temperature range of 5 - 40 °C, versatile for various lab conditions The axial flow stirrer is expertly designed to draw materials from above, optimizing the mixing process for low to medium viscous liquids. With a 100 mm stirrer diameter and a 575 mm shaft, it's tailored for comprehensive circulation and handling at medium speeds. Crafted from durable AISI 316L / 1.4571 stainless steel, this stirrer stands up to rigorous use while resisting corrosion. Weighing 0.6536 kg and capable of operating in ambient temperatures of 5 - 40 °C, it combines functionality with reliability for effective lab work.INCLUDED: The IKA R 3001.1 Moebius stirrer includes: - IKA R 3001.1 Moebius stirrer - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

IKA R 3000.1 Moebius stirrer Maximum Speed ≤ 800 RPM Flow Type Axial Flow Material Stainless Steel F (more)eatures - Generates axial flow, drawing material from above for effective mixing - Ideal for circulating and handling low to medium viscous liquids - Made of AISI 316L / 1.4571 stainless steel for durability and resistance - Designed to work within an ambient temperature range of 5 - 40 °C - Operates at medium speeds with a maximum of ≤ 800 rpm The R 3000.1 Moebius stirrer is engineered to generate axial flow, skillfully drawing materials from above to ensure thorough mixing and circulation of low to medium viscous liquids. With a 100 mm diameter and a 565 mm shaft, it's perfectly suited for a variety of laboratory applications, operating effectively at medium speeds up to 800 rpm. Constructed from high-quality AISI 316L / 1.4571 stainless steel, it combines resilience with corrosion resistance. Weighing 0.592 kg and designed to function within a 5 - 40 °C ambient temperature range, this stirrer balances performance with durability for reliable everyday use.INCLUDED: The IKA R 3000.1 Moebius stirrer includes: - IKA R 3000.1 Moebius stirrer - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

IKA R 2311 Paddle Stirrer Tangential flow, minimum turbulence, good heat exchange, gentle treatment (more) of product. Used at low to medium speeds.Stirrer Ø: 150 mmShaft Ø: 13 mmShaft length: 800 mm INCLUDED: The IKA R 2311 Paddle Stirrer includes: - Operator's Guide - Manufacturer's Documentation - 30 Day Full Parts and Labor Warranty Request a Formal Quote

IKA R 2302 Propeller 4 - Bladed Stirrer Standard stirring element. For drawing the material to be m (more)ixed from the top to the bottom. Local shearing forces. Generates axial flow in the vessel. Used at medium to high speeds.Stirrer Ø: 150 mmShaft Ø: 13 mmShaft length: 800 mm INCLUDED: The IKA R 1381 Propeller 3 - Bladed Stirrer includes: - Operator's Guide - Manufacturer's Documentation - 30 Day Full Parts and Labor Warranty Request a Formal Quote

IKA R 1405 Propeller StirrerThe R 1405 propeller head is designed for the use with the overhead stir (more)rers EUROSTAR 20 high speed digital / control. It can also be used as an alternative mixing head to the R 1402 dissolver head on the high speed stirring shaft R 50 of the disperser T 50 digital. It is ideally suited for applications which work with low to medium mixing viscosities that require axial flow pattern at high speed with minimal temperature increase.Working range: 0.25 - 30 lRotor diameter: 45 mmNote: R 1405 needs to be attached to either the precision shaft R 6000 (if used with EUROSTAR 20 high speed) or the high speed stitting shaft R 50 (if used with T 50 digital) in order to operate. The shafts are not included in the scope of delivery of R 1405. INCLUDED: The IKA R 1405 Propeller Stirrer includes: - Operator's Guide - Manufacturer's Documentation - 30 Day Full Parts and Labor Warranty ( + Additional Free 1 Year Warranty Extension with IKA Registration) Request a Formal Quote

IKA R 1402 Dissolver The R 1402 dissolver head is designed for the use with the overhead stirrers E (more)UROSTAR 20 high speed digital / control and the high speed stirring shaft R 50 of the disperser T 50 digital. It is ideally suited for applications which work with low to medium mixing viscosities that require radial flow patterns at high speed with medium to high shearing forces.Working range: 1 - 30 lRotor diameter: 42 mmNote: R 1402 needs to be attached to either the precision shaft R 6000 (if used with EUROSTAR 20 high speed) or high speed stirring shaft R 50 (if used with T 50 digital) in order to operate. The shafts are not included in the scope of delivery of R 1402. INCLUDED: The IKA R 1402 Dissolver includes: - Operator's Guide - Manufacturer's Documentation - 30 Day Full Parts and Labor Warranty ( + Additional Free 1 Year Warranty Extension with IKA Registration) Request a Formal Quote

IKA R 1401 Propeller The R 1401 propeller head is designed for the use with the overhead stirrers E (more)UROSTAR 20 high speed digital / control. It is ideally suited for applications which work with low to medium mixing viscosities that require axial flow pattern at high speed with minimal temperature increase.Working range: 1 - 30 lRotor diameter: 55 mmNote: R 1401 needs to be attached to the precision shaft R 6000 in order to operate. The shaft is not included in the scope of delivery of R 1401. INCLUDED: The IKA R 1401 Propeller includes: - Operator's Guide - Manufacturer's Documentation - 30 Day Full Parts and Labor Warranty Request a Formal Quote

IKA R 1389 PTFE Coated Propeller 3 - Bladed Stirrer Flow-efficient design. For drawing the material (more) to be mixed from the top and the bottom. Minimum shearing forces. Used at medium to high speeds.Stirrer Ø: 75 mmShaft Ø: 8 mmShaft length: 350 mm INCLUDED: The IKA R 1389 PTFE Coated Propeller 3 - Bladed Stirrer includes: - Operator's Guide - Manufacturer's Documentation - 30 Day Full Parts and Labor Warranty Request a Formal Quote

IKA R 1388 Propeller 3 - Bladed Stirrer Flow-efficient design. For drawing the material to be mixed (more) from the bottom to the top. Minimum shearing forces. Used at medium to high speeds.Stirrer Ø: 140 mmShaft Ø: 10 mmShaft length: 800 mm INCLUDED: The IKA R 1389 PTFE Coated Propeller 3 - Bladed Stirrer includes: - Operator's Guide - Manufacturer's Documentation - 30 Day Full Parts and Labor Warranty Request a Formal Quote

IKA R 1385 Propeller 3 - Bladed Stirrer Flow-efficient design. For drawing the material to be mixed (more) from the bottom to the top. Minimum shearing forces. Used at medium to high speeds.Stirrer Ø: 140 mmShaft Ø: 10 mmShaft length: 550 mm INCLUDED: The IKA R 1385 Propeller 3 - Bladed Stirrer includes: - Operator's Guide - Manufacturer's Documentation - 30 Day Full Parts and Labor Warranty Request a Formal Quote

IKA R 1382 Propeller 3 - Bladed Stirrer Flow-efficient design. For drawing the material to be mixed (more) from the top and the bottom. Minimum shearing forces. Used at medium to high speeds.Stirrer Ø: 55 mmShaft Ø: 8 mmShaft length: 350 mm INCLUDED: The IKA R 1382 Propeller 3 - Bladed Stirrer includes: - Operator's Guide - Manufacturer's Documentation - 30 Day Full Parts and Labor Warranty Request a Formal Quote

IKA R 1381 Propeller 3 - Bladed Stirrer Flow-efficient design. For drawing the material to be mixed (more) from the top and the bottom. Minimum shearing forces. Used at medium to high speedsStirrer Ø: 45 mmShaft Ø: 8 mmShaft length: 350 mm INCLUDED: The IKA R 1381 Propeller 3 - Bladed Stirrer includes: - Operator's Guide - Manufacturer's Documentation - 30 Day Full Parts and Labor Warranty Request a Formal Quote

IKA R 1376 Paddle Stirrer Tangential flow, minimum turbulence, good heat exchange, gentle treatment (more) of product. Used at low to medium speeds.Stirrer Ø: 150 mmShaft Ø: 10 mmShaft length: 550 mm INCLUDED: The IKA R 1376 Paddle Stirrer includes: - Operator's Guide - Manufacturer's Documentation - 30 Day Full Parts and Labor Warranty Request a Formal Quote

IKA R 1375 Paddle Stirrer Tangential flow, minimum turbulence, good heat exchange, gentle treatment (more) of product. Used at low to medium speeds.Stirrer Ø: 70 mmShaft Ø: 8 mmShaft length: 550 mm INCLUDED: The IKA R 1375 Paddle Stirrer includes: - Operator's Guide - Manufacturer's Documentation - 30 Day Full Parts and Labor Warranty Request a Formal Quote

IKA R 1355 Centrifugal Stirrer Radial flow, for drawing the material to be mixed from the top and t (more)he bottom. High turbulence, high shearing forces. Particle reduction. Used at medium to high speeds.Stirrer Ø: 80 mmShaft Ø: 8 mmShaft length: 350 mm INCLUDED: The IKA R 1355 Centrifugal Stirrer includes: - Operator's Guide - Manufacturer's Documentation - 30 Day Full Parts and Labor Warranty Request a Formal Quote

IKA R 1352 Centrifugal Stirrer Two-bladed, blades open with increasing speed. For stirring in round (more) vessels with narrow necks. Effect is similar to that of a 4-bladed propeller stirrer. Medium to high speeds required.Stirrer Ø: 60 / 15 mmShaft Ø: 8 mmShaft length: 350 mm INCLUDED: The IKA R 1352 Centrifugal Stirrer includes: - Operator's Guide - Manufacturer's Documentation - 30 Day Full Parts and Labor Warranty Request a Formal Quote

IKA R 1345 Propeller 4 - Bladed Stirrer Standard stirring element. For drawing the material to be m (more)ixed from the bottom to the top. Local shearing forces. Generates axial flow in the vessel. Used at medium to high speeds.Stirrer Ø: 100 mmShaft Ø: 8 mmShaft length: 540 mm INCLUDED: The IKA R 1345 Propeller 4 - Bladed Stirrer includes: - Operator's Guide - Manufacturer's Documentation - 30 Day Full Parts and Labor Warranty Request a Formal Quote

IKA R 1342 Propeller 4 - Bladed Stirrer Standard stirring element. For drawing the material to be m (more)ixed from the top to the bottom. Local shearing forces. Generates axial flow in the vessel. Used at medium to high speeds.Stirrer Ø: 50 mmShaft Ø: 8 mmShaft length: 350 mm INCLUDED: The IKA R 1342 Propeller 4 - Bladed Stirrer includes: - Operator's Guide - Manufacturer's Documentation - 30 Day Full Parts and Labor Warranty Request a Formal Quote

IKA R 1333 Anchor Stirrer Tangential flow, high shearing rate at edges, minimum deposits on the ves (more)sel wall. Used at low speeds. Polymer reactions, even distribution of high mineral contents in liquids. The ideal stirrer for medium to highly viscous fluids. Stirrer Ø: 150 mmShaft Ø: 10 mmShaft length: 550 mm INCLUDED: The IKA R 1333 Anchor Stirrer includes: - Operator's Guide - Manufacturer's Documentation - 30 Day Full Parts and Labor Warranty Request a Formal Quote

IKA R 1331 Anchor Stirrer Tangential flow, high shearing rate at edges, minimum deposits on the ves (more)sel wall. Used at low speeds. Polymer reactions, even distribution of high mineral contents in liquids. The ideal stirrer* for medium to highly viscous fluids.Stirrer Ø: 90 mmShaft Ø: 8 mmShaft length: 350 mm INCLUDED: The IKA R 1402 Dissolver includes: - Operator's Guide - Manufacturer's Documentation - 30 Day Full Parts and Labor Warranty Request a Formal Quote

IKA R 1330 Anchor Stirrer Tangential flow, high shearing rate at edges, minimum deposits on the ves (more)sel wall. Used at low speeds. Polymer reactions, even distribution of high mineral contents in liquids. The ideal stirrer for medium to highly viscous fluids.Stirrer Ø: 45 mmShaft Ø: 8 mmShaft length: 350 mm INCLUDED: The IKA R 1330 Anchor Stirrer includes: - Operator's Guide - Manufacturer's Documentation - 30 Day Full Parts and Labor Warranty Request a Formal Quote