All categories

Technical features Flow rate (max.) 30 l / min Ultimate vacuum (max.) 160 mbar (abs.) Operating pres (more)sure (max.) 0.5 bar (rel.) Permitted fluid temperature 5-40°C FFPM valve material Membrane material PTFE coating PPS pump head material Applications Filtration Degassing Drying Aspiration of fluids Solid phase extraction Qualitative characteristics Clean operation, 100% oil free Corrosion resistant Compact, silent and reliable Small footprint It can handle humid vapors without damage Maintenance free Download the data sheet for further information and accessories. NOT SURE WHICH VACUUM PUMP YOU NEED? Try following our guide to KNF pumps: VACUUM PUMPS FOR THE LABORATORY Or download the KNF guide: THE IDEAL DIAPHRAGM PUMP FOR EVERY APPLICATION

Heating thermostat from 30°C to 250°C for professional thermostats LAUDA PRO is a cutting-edge produ (more)ct line, designed to be the laboratory tools of the future. A significant innovation was the division between thermostats dedicated to internal applications and those dedicated to external applications. Then, the choice of offering products with tanks of a few liters allows the operator to quickly reach the desired temperature. New criteria have also been adopted for the design of the control panels. Two operational approaches are available, Basic, with OLED screen and essential but professional features, and Command Touch (named 'C'), the ultimate in the LAUDA experience, with touch display, graphic displays and numerous functions. In either case, the control panel can be removed from the thermostat for maximum operational flexibility and a noticeable decrease in instrument height. All thermostats are equipped with an Ethernet, USB interface and a Pt100 connection as standard. Cooling thermostats are also available with natural refrigerants. In addition, as standard, they are equipped with a cooling system that allows a lowering of the thermostat temperature with water. Notable features - Removable control panel for remote control - Stainless steel bathtubs (insulated with handles and drain tap) - 8-stage LAUDA Vario internal pump - Ethernet interface, USB and Pt100 connection as standard - Drain cock on the front of the device Accessories included Tank covers, pipe fittings with screw caps for the cooling coil Graph of heating performance of PRO P LAUDA thermostats.

Food scale Valor 2000 Ohaus The OHAUS Valor 2000 waterproof food scale is a unique tool of its kind, (more) thanks to a winning combination: speed and duration. Available with both stainless steel and plastic armor, Valor 2000 features two large LED displays, one front and one rear, food safety and puncture-resistant keyboards, elements that help make it a perfect tool for dry or humid environments.Cut-resistant keyboard prevents damage caused by sharp objects - Flow-Thru waterproof design, IP68, for weighing liquids and more in the wettest environments - Speed ​​and double display: several operators can work at the same time - The Valor 2000's unique IPX8 Flow-Thru design, NSF certified, allows the balance to drain moisture when used in humid environmental conditions. - The sturdy polycarbonate keyboard provides valuable protection from knives and other sharp tools used in food preparation, processing and portioning applications. - The stabilization time is less than half a second. Large front and rear LED displays allow for easy weight viewing, allowing two operators to share a single scale. Applications Weighing, checkweighing (inox models only) Display Double LED display Operation AC adapter (included) or rechargeable battery (included) Communication N/A Structure ABS armor with stainless steel platform (stainless steel models: armor and platform in stainless steel), front leveling indicator Construction features Self-closing power socket cover, carrying handle

2 block dry heaters Designed for daily use in the laboratory, dry block heaters are ideal for applic (more)ations that require particular temperature stability. All units house two easily interchangeable modular blocks, with 40 options to choose from. Close contact between tube and block ensures maximum heat retention for efficient heating. Analog models: economic alternative; low temperature range: +5°C above ambient temperature to 100°C; high temperature range: 75°C to 150 ° C; control via two temperature adjustment knobs. Digital models: for repeatable results; from 5°C above ambient temperature to 120°C; control via touch pad controls with independent and easy to read LED displays for temperature and time display; sound alarm. Models with lid: from 5°C above ambient temperature to 100°C; like digital models but with a heated lid, to minimize condensation and preserve the integrity of the samples. - Exceptional temperature uniformity and extraordinary thermal stability. - Unique single point calibration function to ensure accurate display of actual temperature (digital models) Applications Culture incubation and activation, enzymatic reactions, immunoassays, melting / boiling points, isothermal incubation, nucleic acid denaturation Display LED display in digital models and knob with double adjustment and markings in analog models Operation Detachable three-wire cable and plug (included). Analog models require an external thermometer or temperature adjustment tool for the setpoint Structure Painted steel armor and support bar attachment with fixing knob Construction features Keypad control and audible alarm (digital models)

Ohaus Scout SKX1202 portable scale, with plate 170x140mm The OHAUS Scout scale, with its large backl (more)it LCD display and integrated educational software, is the ideal tool for use in the classroom. It offers premium quality overload protection, fast stabilization times, increased range, more connection options and stackable design - the most advanced learning weighing experience. Applications Weighing, density determination, weighing of moles Screen Liquid crystal display (LCD) with backlight Operation AC adapter (included) or 4 AA batteries (not included) Communication RS232, USB host, USB device, Ethernet or Bluetooth ™ (available as an accessory) Construction ABS housing, stainless steel pan, ABS draft shield (1mg model only), bottom weigh hook, transport lock, manual calibration lock switch, security slot Characteristics of the project Stability indicator, stackable design with storage lid included (excluding 1 mg model), mechanical and software overload / underload protection, low battery indicator, automatic shutdown, automatic tare, span calibration mass included on models with capacity up to 620 g Applications integrated in the scale: - Weighing: allows you to calculate the weight of the samples in the selected unit of measurement. - Density determination: calculation of the density of solids or liquids. Thanks to the integrated weigh below hook, it is possible to carry out tests for the specific gravity of objects that cannot be placed on the weighing pan. - Molar concentration: calculation of the mass of a sample and automatic conversion into the molar concentration.

METTLER TOLEDO Seven2Go pH meter ONE HANDED OPERATION Seven2Go's easy-to-reach buttons and sleek des (more)ign ensure convenient one-handed operation. Seven2Go's simplified menu, automatic sensor recognition and calibration reminder ensure users get high-quality data quickly and easily. AN INVESTMENT Seven2Go's IP67 design, low weight and rugged uGo carrying case ensure a long-lasting instrument that provides reliable data even in harsh conditions. ISM® Ready – Reduced chance of error When connecting any InLab ISM® (Intelligent Sensor Management) sensor, the instrument automatically recognizes the sensor and stores the sensor ID, serial number and last calibration data. IP67 - Rugged, weatherproof design With IP67 protection and drop test resistance, the new Seven2Go laptops can withstand harsh environments. TECHNICAL FEATURES: Parameter: pH; ORP Channel: Single channel Kit version: Ready-to-use measurement kit Sensor: InLab Expert Go-ISM PH measuring range: -2 - 20 PH Resolution: 0.01; 0.1 pH accuracy (±): 0.01 mV measurement range: 0 MV Resolution: 1 VM accuracy (±): 1 mV measurement range -1999..1999 mV Temperature range (2): -5°C - 105°C Temperature resolution: 0.1°C Temperature accuracy (±): 0.5°C. Portable: Yes Intelligent Sensor Management (ISM) Compatible: Yes Memory capacity: 200 measurements Degree of protection: Watertight and dustproof (IP67) Memory size 200 measurements

Heating thermostat from 20 to 200°C, with TFT color display and complete programming functions LAUDA (more) ECO stands out for its range of features and ease of use. ECO thermostats are available in Silver (LCD display; simple programming) and Gold (TFT color display; complex programming) models, equipped with a mini USB interface as standard. A LAUDA innovation is the pressure flow controller located on the front of the head. This means that flow regulation between inside and outside is possible even during operation. - The circulation pump can be adjusted to six levels - Programmer with 150 temperature/time segments separable into 5 programs - Fully electronic continuous regulator with PID action - Additional key Tmax for overtemperature protection - The ECO heating thermostat line includes transparent baths up to 100°C and stainless steel up to 200°C - The most powerful units are equipped with the energy-saving LAUDA SmartCool system - Variants in 230V; the 50 Hz are also available with natural refrigerants - Temperature graphs on display - Convenient operation with softkey cursor - Safety class III for operation with flammable and non-flammable liquids. - mini-USB interface LAUDA tank thermostats are equipped as standard with a cooling coil. The E 4 model is also equipped with a lid for the bowl and connections for external applications. A drain cock on the rear side makes changing the heat transfer liquid easy and safe. Heating performance graph of Gold immersion thermostats with stainless steel tank. Performance graph of the pump pressing on the six levels.

Proline heating thermostat with tank Proline clear-view LAUDA thermostats have been designed for dir (more)ect observation of objects. They are ideal for use with LAUDA Scientific PVS or iVisc automatic viscometer, as the necessary temperature stability for precise viscosity determination is ensured over the entire temperature range. In addition, the two-chamber principle always guarantees a constant liquid level in the measuring chamber, regardless of the volume and temperature of the medium. PVL models with five layers of insulating glass are suitable for low temperature measurements down to -40° or -60°C when a low temperature chiller or thermostat is connected. These thermostats are available with two different control units. The Master version is designed for all applications where the parameters are not changed very often. The removable Command operating unit (PV C models) incorporates a graphic LCD screen for high operating convenience and a programmer. Notable features - LAUDA Vario Flex pump (pressure pump) with eight selectable power levels - Cooling coil fitted as standard with connection for additional cooler Accessories included Fittings for pump connection, cooling coil Specific features of the Proline PVL 15 model - Tank volume min. 11 L - Tank volume max. 15 L - Tank opening 230 x 135 mm - Bowl depth 320 mm - Usable depth 285 mm - Upper height of the tank 390 mm - Master control panel; calibration point, timer, under / over temperature alarms, digital indicators - Pump pressure mx. 1.1 bar - Water-cooled temperature range from 20°C to 100°C - Operating temperature range from -60°C to 100°C - Pump connectors M16 x 1 - Fitting 13 Ø

SCALES SUITABLE FOR EVERY USE The Navigator Series is perfect for general weighing applications in l (more)aboratory, industrial, education, retail, commercial, manufacturing, food and portioning environments. A powerful, rugged and multifunctional scale capable of handling a wide range of weighing applications with features such as fast stabilization time, overload protection four times its rated capacity and easy operation. - Excellent value for money - Few-second stabilization to improve efficiency, productivity and throughput - Overload protection system, capable of withstanding loads up to four times higher than the nominal capacity: protect the scale from improper use. Applications Weighing: Determines the weight of the items on the pan in the selected unit of measure. Piece Counting: Count the number of pieces on the pan using a uniform weight. Percent Weighing: Measures the weight of a sample displayed as a percentage of a pre-set reference weight. Checkweighing: Compares the weight of a sample against the set targets. Other standard features and equipment ABS construction, stainless steel weighing pan, transport lock, menu switch and safety lock for adjustment, non-slip and adjustable feet, bubble level, mechanical and software overload/underload protection, indicator stability, low battery indicator, auto power off, user selectable print options, user selectable communication settings. MODELLI DISPONIBILI Applications Weighing, Parts Counting, Percent Weighing, Checkweighing Display Liquid Crystal Display (LCD) with backlight Operation AC adapter (included) or 4 C batteries (not included) Communication RS232, USB, or Ethernet (available as accessories) Construction ABS housing, stainless steel pan, transportation lock, slip-resistant and adjustable feet, leveling bubble Design Features Menu and calibration lock switch, mechanical and software overload/underload protection, stability indicator, low battery indicator, auto shut-off, user-selectable print options, user-selectable communication settings SUITABLE FOR ANY FIELD AND USE EDUCATIONAL: valuable overload protection system. Additionally, the portability of the Navigator balance makes it ideal for field experiments. LABORATORY: simple to clean, precise and easy to use in the laboratory. Ideal for laboratory applications such as formulation, quality inspection, testing and experimentation. INDUSTRY: Robustness, speed and accuracy, it is ideal to use in medium-light industrial applications such as paint and ink mixing, packaging, sampling and piece counting. SALES, TRADE, AND MANUFACTURING: Rugged, Portable, and Reliable. Ideal for use in shipping and receiving, retail or warehouse environments. Battery operation and counting and checkweighing modes expand the possibilities of use in hobby, inventory management, inspection and quality control. FOOD AND PORTIONING: hygiene, duration and reduced maintenance. Ideal for portioning and in pre-packaging. Units of measure such as kg, g, lb, oz, lb:oz and checkweighing and percentage checkweighing modes enhance their utility at the counter, in prep and in the kitchen.

pHmetro SevenExcellence pH meter S400-Std-Kit METTLER TOLEDO Professional and flexible SevenExcellen (more)ceTM fits three modules in any composition and order. It offers the greatest possible flexibility as it is possible to expand the instrument at any time by adding new measurement parameters. This tool was designed to help you meet the most stringent compliance requirements. SevenExcellenceTM offers the ideal combination of innovative properties integrated into the instrument, appropriate documentation and services. Professional pH calibration Extra safety with calibrations, thanks to methods with a rigid user guide and offset and slope monitoring. Efficient workflow support One click is all it takes to start a sample or a series of measurements or a series of analyzes with an optional autosampler. Once set up, data archiving is a standard procedure that will take place automatically after each analysis. The large, clear color display and state-of-the-art touch screen operation make working with this tool particularly enjoyable. Specifications - SevenExcellence S400 Std pH meter kit Parameter: pH; ORP Channel: single channel Sensors: InLab Expert Pro-ISM PH measuring range: -2 ... 20 Resolution pH: 0.001; 0.01; 0.1 Accuracy of pH (±): 0.002 English language; Italian; French; Russian; Portuguese; Chinese; Korean; German; Spanish; Japanese Measuring range mV: 0 ... 0 mV resolution: 0.1; 1 MV accuracy (±): 0.1 Temperature range: -30°C...130°C Temperature rise: 0.1 ° C Temperature accuracy (±): 0.1°C Security and compliance: password protection; GLP; 21 CFR part 11 support; User Management; Program the POS in methods Memory size: 250 analyzes (20,000 data points) Transfer date: PC; printer; USB pendrive Flexibility and modularity: Upgrade for additional parameter; agitators; automation; Barcode reader; LabX software Sensor included: generalist sensor Display type: TFT color touchscreen Meter Type: Single Channel Benchtop Measuring range mV: -2,000,000-2,000,000 Compatible with Intelligent Sensor Management (ISM) All the advantages of SevenExcellence METTLER TOLEDO

LAUDA Proline immersion thermostat The LAUDA Proline bridge thermostats with vario flex pump are exc (more)ellent for thermostating in any tank. The PB models have a pressure / suction pump and are used in tanks of 200 mm. While the PBDs are equipped with pumps with more powerful pressure and used in tanks of 320 mm deep. Also available are a telescopic rod for tubs with a width of 310 to 550 mm, an ergonomic handle and attachments for side pumps. The LAUDA Proline bridge thermostats are available with two different control panels. The Master version (PB, PBD) is designed for all applications where the parameters are not changed very often. Models with the removable Command operating unit (PB C; PBD C) offer a graphic LCD screen for high ease of use and optimum functionality. The 'D' versions, 'PBD' and 'PBD C' models, are equipped with a max 1.1 bar pressure pump only, with a max. (pressure) of 32 L/min. The 'PB' and 'PB C' models are equipped with pressure and suction pumps, mac 0.7 bar and 0.4 bar respectively, with a max. (pressure) of 25 L/min. Notable features - PowerAdapt system for optimal adaptation of the max. Heat output. without interfering with the mains power supply - Low level protection and adjustable overtemperature protection with audible alarm. Levels measured with float Accessories included Fittings for pump connection, telescopic rod Specific characteristics of the Proline PBD C model - For tanks of 320 mm deep - State-of-the-art Command control panel, removable, for remote use; LCD display with the most advanced feature set in the LAUDA range - Pump pressure mx. 1.1 bar - Tank volume max. 80 L - Water-cooled temperature range from 20°C to 300°C - Operating temperature range from -30°C to 300°C - Pump connectors M16 x 1 - Fitting 13 Ø

New generation of Ohaus portable scales These balances are ideal for laboratory and industrial appli (more)cations. They feature an easy to navigate color touchscreen display and a compact design that allows for storage. They offer excellent performance with fast stabilization times and high resolution results. They also feature excellent overload protection and advanced connection options. - Fast and efficient navigation thanks to the color touchscreen display - High weighing speed and high resolution display of repeatable and reliable results - Excellent overload protection - Different application modes and operation in various languages ​​for simplified weighing The OHAUS Scout scale can be equipped with various connectivity options: RS232, USB, USB device, Ethernet or Bluetooth®. These options guarantee a modern and smart experience, increase the versatility of data collection and transfer functions. Other standard features and equipment Transport lock, stainless steel weighing pan, menu and setting lock switch, adjustable and non-slip feet, bubble level, software and mechanical overload/underload protection, stability indicator, automatic tare, level indicator low battery, auto power off, user selectable print options and communication settings. Applications Weighing: Determines the weight of the items on the pan in the selected unit of measure. Piece Counting: Count the number of pieces on the pan using a uniform weight. Percent Weighing: Measures the weight of a sample displayed as a percentage of a pre-set reference weight. Check Weighing: Compares the weight of a sample against target limits. Dynamic Weighing: Weigh an unstable sample load. The balance takes an average of weights over a period of time. Totalization: Measures the cumulative weight of multiple items. Cumulative total may exceed balance capacity. Density Determination: Determines the density of solids or liquids. With the integrated weigh below hook, specific gravity tests can be performed for items that cannot easily be placed on the weighing pan. Display Hold: Manually holds the last stable weight or the first highest stable weight value on the display. Mole Weighing: Measures the weight of a sample and automatically calculates it into the mole. MODELS AVAILABLE: Applications Weighing, Parts Counting, Percent Weighing, Check Weighing, Animal/Dynamic Weighing, Totalization, Density Determination, Display Hold, Molar Weighing Display 4.3' (109mm) touchscreen display with color VGA graphics resolution and user controllable brightness Operation Power supply (adapter supplied) or batteries (not supplied) with low battery level indicator and programmable automatic shutdown Communication RS232, USB host, USB device, Ethernet or Bluetooth® (available as accessories) Framework ABS housing, stainless steel pan, ABS draft shield (1 mg models only), weigh below hook, transport lock, manual calibration lock switch, security slot, stabilizing feet, level indicator illuminated front Construction features Stability indicator, stackable design with included storage cover (except 1mg models), mechanical and software overload and underload protection, battery life indicator, auto power off, auto tare, calibration weight provided in models with capacity greater than 620 gr. THE TOUCHSCREEN DISPLAY Using portable scales has never been easier! The color touchscreen display allows you to explore the interface and icon menu, open and close application modes, change units of measure with a single touch of the screen. In seconds, an unmatched level of portable weighing efficiency and functionality. In addition, GLP/GMP traceability makes it easier to monitor and report data.

The system includes: pt100 probe (code A00000268), rod (code A00001069) and clamp (code A00000280);  (more)magnetic stir bar Ø8x40 mm (code A00000356). AREC 7 CONNECT MAGNETIC STIRRER AREC 7 Connect features state-of-the-art heating plate technology, designed by VELP, which ensures temperature homogeneity, thermal efficiency and long-lasting heating performance. AREC 7 Connect can be connected to the external Pt100 probe for precise thermoregulation of the fluid, being ideal for temperature-sensitive applications in Chemistry, Biotechnology and Pharmaceuticals. The probe guarantees stable and precise thermoregulation up to 300°C, with an accuracy of ± 0.5°C. Powerful stirring for all your lab applications Thanks to the powerful magnetic coupling, you will have the possibility to stir up to 20 liters (H2O), from 30 up to 1700 rpm (aqueous solutions), ideal characteristics for any type of application, chemical, pharmaceutical and microbiological. In addition, the SpeedServo ™ technology, designed by VELP, will keep the speed constant as the viscosity changes. Absolute safety and ease of use for laboratory operators The AREC 7 Connect hotplate stirrer guarantees a higher level of safety and protection for laboratory operators, as it is entirely made of technopolymer and is equipped with an extremely resistant ceramic plate, ideal for high resistance to acids, bases and solvents. When the platen temperature is above 50°C and the heating function is not active, a safety message is displayed. The control panel is positioned at a safe distance from heat sources and the technopolymer structure is carefully designed so that accidental spills of liquids cannot reach the electronics. Save time with the new control panel Thanks to the double digital display, extremely bright and easy to read, it is possible to constantly monitor the temperature and the stirring speed. Two new comfortable knobs: the left one for the temperature (up to 550°C), the right one for the stirring speed (up to 1700 rpm). The innovative low profile design for exceptional comfort above the bench and inside the laboratory hood. Programmable operation for excellent laboratory efficiency AREC Connect is equipped with some exclusive and extremely advanced features that optimize unattended operation, easily usable, thanks to the intuitive display: - Integrated timer to suit your lab workflow - 1 min to 99 h 59 min (1 min steps) - Autorverse of the stirring direction which guarantees advanced mixing capabilities - from 5 s to 99 min and 59 s (1 s steps) - Programs in intermittent mode for better scheduling of unattended operations - from 5 s to 99 min 59 s (1 s steps) - Acoustic signals for timers and alarms - Safety lock function to avoid possible alterations of the working conditions VELP ERMES: FROM USER WORK MANAGEMENT TO DATA-RICH PROCESSES AREC Connect has built-in Wi-Fi technology to connect to the VELP Ermes Cloud Platform, the perfect solution for your Smart Lab. VELP Ermes Cloud Platform allows the reduction of daily manual activities and repetitive operations thanks to the real-time monitoring and control of your AREC Connect. By simply using a PC, smartphone or tablet you can access instrument data and working conditions anytime, anywhere. You will be able to protect your analytical data and share reports with your colleagues; receive immediate notifications of remote events and alarms; record data and insights to improve productivity and reproducibility. Connecting your AREC will be very easy, you can see it from the dedicated Ermes guide. You will also receive an exclusive level of assistance from authorized VELP service centres.VELP ERMES: FROM USER WORK MANAGEMENT TO PROCESS DATA-RICH AREC Connect has built-in Wi-Fi technology to connect to the VELP Ermes Cloud Platform, the perfect solution for your Smart Lab. VELP Ermes Cloud Platform allows the reduction of daily manual activities and repetitive operations thanks to the real-time monitoring and control of your AREC Connect. By simply using a PC, smartphone or tablet you can access instrument data and working conditions anytime, anywhere. You will be able to protect your analytical data and share reports with your colleagues; receive immediate notifications of remote events and alarms; record data and insights to improve productivity and reproducibility. Connecting your AREC will be very easy, you can see it from the dedicated Ermes guide. You will also receive an exclusive level of assistance from authorized VELP assistance centres.

Heating thermostat Alpha: from 25 to 100°C LAUDA Alpha is the most affordable choice when it comes t (more)o high quality LAUDA thermostats. These reliable and easy-to-use thermostats, with features reduced to the essentials, can be operated with non-flammable liquids and are suitable for both indoor and outdoor temperature control tasks. The cooling system, the pump circulation set and the bath cover set are available as accessories for all thermostats. With the water cooling system, the thermostat can be used for operations from 20° to 100°C. Low-level and overtemperature protection for operation with non-flammable liquids. Qualitative characteristics - Simple and intuitive menu navigation with three-button operation via a large, clearly legible LED display - Integrated timer function to allow automatic shutdown of the device - Under / over temperature protection for operation with non-flammable liquids The back of the Alpha thermostat: clamp, power supply and reset button. Simple control with three buttons and three indicator lights: active heating, active cooling and alarm light. Can be used with any bath vessel up to 30 mm thick with the included screw clamp. TECHNICAL VISUALIZATION 1 - Temperature controller with four segment LED display 2 - Heater active (yellow LED is lit) Cooler active (blue LED is lit) Error signal (red LED is flashing) 3 - Menu functions, select and Enter keys 4 - Mains switch 5 - Screw clamp 6 - Tubular heater 7 - Temperature probe Pt100 8 - Pump outflow with pump outflow reducer 1 - Reset button (press only if the display shows SAFE ) 2 - Cooler cable 3 - Rating label 4 - Mains cable 5 - Screw clamp Graph of pump characteristics in Alpha Lauda models: Alpha LAUDA immersion thermostat: simple and quick to install.

Technical features Flow rate (max.) 34 l / min Final vacuum (max.) 8 mbar (abs.) Pressure (max.) 1 b (more)ar (rel.) Permissible fluid temperature 5-40°C Valve material: FFPM Diaphragm material PTFE coated Pump head material: PTFE Applications Rotary evaporation Degassing Drying of the gel Vacuum oven Qualitative characteristics Clean operation, 100% oil-free Chemically resistant PTFE / FFPM flow path Ideal for extremely aggressive / corrosive gases and vapors Compact, silent and reliable Maintenance free ATEX compliant only for internal atmosphere (Ex) II 2 / -G IIB + H2 T3 Download the data sheet for further information and accessories NOT SURE WHICH VACUUM PUMP YOU NEED? Try following our guide to KNF pumps: VACUUM PUMPS FOR THE LABORATORY Or download the KNF guide: THE IDEAL DIAPHRAGM PUMP FOR EVERY APPLICATION

1 block dry heaters Designed for daily use in the laboratory, dry block heaters are ideal for applic (more)ations requiring particular temperature stability. All units house an easily interchangeable modular block, with 40 options to choose from. Close contact between tube and block ensures maximum heat retention for efficient heating. Analog models: economic alternative; low temperature range: +5°C above ambient temperature to 100°C; high temperature range: 75°C to 150°C; control via two temperature adjustment knobs. Digital models: for repeatable results; from 5 ° C above ambient temperature to 120°C; control via touch pad controls with independent and easy to read LED displays for temperature and time display; sound alarm. - Exceptional temperature uniformity and extraordinary thermal stability. - Unique single point calibration function to ensure accurate display of actual temperature (digital models) Applications Culture incubation and activation, enzymatic reactions, immunoassays, melting / boiling points, isothermal incubation, nucleic acid denaturation Display LED display in digital models and knob with double adjustment and markings in analog models Operation Detachable three-wire cable and plug (included). Analog models require an external thermometer or temperature adjustment tool for the setpoint Structure Painted steel armor and support bar attachment with fixing knob Construction features Keypad control and audible alarm (digital models) Technical Specifications

ECO Silver Lauda - Cooling Thermostat LAUDA ECO with reliable technology and modern design for tempe (more)rature ranges from -50°C to 200°C depending of the models. Microprocessor management and integrated cooling system. Silver (monochromatic LCD graphic display), both equipped with mini USB interface. They are distinguished by their range of functions, ease of use and clarity of the display, allowing maximum comfort of use for the operator. These models offer the highest performance conveyed by the LAUDA SmartCool intelligent system, for maximum energy savings. The circulation pump can be adjusted to six levels and the comprehensive range of ECO devices offers cooling capacities from 180 to 700 watts. Refrigerated thermostats comes standard with tank lid, pump connections and are available with air and water cooling. A drain cock on the back of the device makes changing the liquid in the tank easy and safe.Thermostatic bath/circulator with latest microprocessor technology and integrated cooling system MAIN FEATURE • Monochrome grafic LCD display for simultaneous indication of actual and set value • User friendly menu navigation in plain language • Easy input via cursor and soft keys. Additional Tmax key for overtemperature protection • Fully electronic continuous controller with PID action • Safety class III for operation with flammable and non-flammable liquids. Overtemperature cut-out adjustable via menu • Vario pump with six adjustable performance levels • Easy control of the flow rate between internal and external circulation during operation without contact with the bath • USB interface as standard • Upgradeable with an interface module (analogue module, contact module, RS 232/485 module, Profibus, Ethernet-USB module) • Upgradeable with Pt 100/LiBus module for external control and remote control via Command console • Integrated programmer, 1 programme with max. 20 segments • Pump connectors with plastic nipples 13 mm as standard • Bath vessel made from stainless steel with drain valve • Condenser cooling Air • Utilizes natural refrigerants Graph of cooling performance of ECO Silver LAUDA cryostats. Performance graph of the pump pressing on the six levels. TECHNICAL VISUALIZATION Display 1 - Status display 2 - Display of the internal or external temperature value (T-int or T-ext) 3 - Soft-key bar Control panel 4 - Soft keys, left and right 5 - Enter key 6 - Cursor keys for Up, Down, Left and Right. 7 - T max key: display and adjustment of the overtemperature switch-off point 1 - USB interface 2 - Upper module receptacle approx. 51 mm x 27 mm for analog, RS 232/485 module, Profibus module and contact module 3 - Lower module receptacle approx. 51 mm x 17 mm for Pt100/LiBus module 4 - Connection socket 75S for control cable of cooling underpart for RE 1050 S 5 - Rating label 6 - Connection socket 51H for power supply between the control head and cooling underpart 7 - Mains connecting lead 1 - Pump connection: Outflow and return with fittings 13 mm diameter (plastic) 2 - Bath cover 3 - Front grip recess 4 - Ventilation grill (both sides) 5 - Front panel (removable without tools) 6 - Four feet 1 - Rating label 2 - Control cable of cooling underpart (only with RE 1050 S) 3 - Rear grip recess 4 - Connecting lead between the control head and cooling underpart 5 - Bath draining tap 6 - Bath drain point 7 - Ventilation grill

Heating thermostat from 40°C to 250°C for professional thermostats LAUDA PRO is a cutting-edge produ (more)ct line, designed to be the laboratory tools of the future. A significant innovation was the division between thermostats dedicated to internal applications and those dedicated to external applications. Then, the choice of offering products with tanks of a few liters allows the operator to quickly reach the desired temperature. New criteria have also been adopted for the design of the control panels. Two operational approaches are available, Basic, with OLED screen and essential but professional features, and Command Touch (named 'C'), the ultimate in the LAUDA experience, with touch display, graphic displays and numerous functions. In either case, the control panel can be removed from the thermostat for maximum operational flexibility and a noticeable decrease in instrument height. All thermostats are equipped with an Ethernet, USB interface and a Pt100 connection as standard. Cooling thermostats are also available with natural refrigerants. In addition, as standard, they are equipped with a cooling system that allows a lowering of the thermostat temperature with water. Notable features - Removable control panel for remote control - Stainless steel bathtubs (insulated with handles and drain tap) - 8-stage LAUDA Vario internal pump - Ethernet interface, USB and Pt100 connection as standard - Drain cock on the front of the device Accessories included Tank covers, pipe fittings with screw caps for the cooling coil Graph of heating performance of PRO P LAUDA thermostats.

ARE 6 VELP - Simple, safe and easy to use The central key activates the heating of the plate only af (more)ter pressing it, avoiding accidental switch-ons. The safety icon informs the operator that the plate is at temperature, preventing possible burns. It will remain illuminated as long as the temperature is below 50°C. The knobs allow precise adjustment of speed and temperature with greater sensitivity. Unprecedented performance The brushless motor allows stirring up to 20 liters at an adjustable speed from 30 to 1700 rpm. Thanks to the SpeedServo ™ system, the speed is kept constant even when the viscosity changes. The Alnico magnet guarantees homogeneous stirring, even in the peripheral areas of the plate and a powerful magnetic coupling between the motor and the stir bar. Maximum Instrument Protection ARE-6 is an IP42 product designed to guarantee years of use and resistance in the laboratory. The structure and materials protect the internal parts of the instrument from possible damage. ARE-6 is guaranteed for 3 years (the warranty extension is obtained by registering the product) The silicone cover ensures further protection of the instrument from possible spills or splashes. Technical features: Motor: Brushless Heating Plate: Aluminum with special protection Feedback System: SpeedServo ™ Temperature Adjustment: Ambient Temperature...+370°C Heating Activation Button: Yes

A homogenizer is a laboratory or industrial instrument used for the homogenization of various types  (more)of materials, such as fabrics, plants, food, soil and many others. The OV 625 Digital laboratory disperser guarantees the highest level of reproducibility for a wide range of laboratory applications. Cutting-edge technology and engineering, like all Velp scientific products, guarantee precision and high shear force for rapid homogenization, emulsification, suspensions and high-speed mixing of biological tissues, pharmaceuticals, cosmetics and food products. Excellent mechanical properties and high chemical resistance make it suitable for even the most demanding laboratory challenges. DISPLAY AND CONTROL Bright, intuitive LED display and rotary knobs allow you to fine-tune the speed between 3,000 and 25,000 rpm. Clear speed information on a black background aids visibility in all conditions. SAFE AND RESISTANT Safety features ensure maximum operator protection. For example, once the set point speed has been set, the OV 625 Digital will reach it gradually. In addition, various alarms warn the user in case of overload and overtemperature. The resistant and hermetic structure allows correct operation even in the most difficult conditions. Warranty up to 3 years. For maximum comfort, choose the model with the double pole stand. CHOOSE THE SUITABLE ACCESSORY Choosing the right dispersing tool is essential to achieve maximum performance and high reproducibility. VELP dispersion tools are made of stainless steel (316L) and equipped with a PTFE seal, to be compatible with different types of samples and reagents. To handle different fluids, different dispersion tools are required. In some applications it is necessary to use two dispersing tools in order to achieve a final fineness level from coarse to fine. Thanks to a knob and a quick fastening system, inserting and changing the dispersion tool is simple and fast: in seconds you can switch from one application to the next. FOCUS ON THE PRODUCT What is a disperser? The disperser can be called in several different ways: homogenizer; Cell Lysor, High Shear Mixer, Polytron, Stator Rotor Homogenizer, Sonicizer or Tissue Tear. The various nomenclatures are due to the various uses of this tool and you have different results that can be obtained through the accessories. Essentially, a disperser is used to create a uniform mixture by forcing the sample through a narrow, confined space. Blade homogenizers, such as Velp's OV 625 Digital, use the blades as a rotor for dispersing. How does it work? The dispersing tool consists of a rotor rotating at high speed inside a stationary stator. The area between the rotor tip and the stator slot is called the shear gap. Thanks to the high circumferential velocity, the fluid is drawn axially into the dispersion head and forced radially through the cutting gap, breaking up the particles.

Varioshake shakers The silent LAUDA shakers are available in a large number of variations and shake  (more)each sample evenly, such as 15ml and 50ml tubes, Erlenmeyer flasks and containers. They can be used for a large number of purposes, thanks to a wide range of accessories. Areas of application: - Biology and microbiology - Medical diagnostics - Analytical laboratories - Test institutes, universities and research facilities - Quality Assurance Laboratories Reliable and durable with new LAUDA design The shakers are the laboratory's trusty 'workhorse'. LAUDA agitators are produced with 'GFL technology' and are synonymous with the highest quality, reliability and durability. Their robust, low-wear mechanical system ensures extremely smooth operation and reliable continuous service. Furthermore, thanks to the new LAUDA design, the stirrers adapt to any laboratory environment, thanks to their small footprint and are extremely easy to use. Control panel: analog or digital The LAUDA Varioshake VS 8 OE and BE, with analog rotary controllers, allow adjustment of speed and operating time. Digitally controlled agitators provide an extended timer range, start / stop function and provide the ability to save the latest operating parameters. The wide range of accessories allows Varioshake shakers to be adapted to any need without problems. Shaker tray, test tube holder, Erlenmeyer flask clamp easy to install in seconds. All available as an accessory. Turn on, set the shaking frequency, set the running time, done. Highest quality materials: daily use for years without problems. The video dedicated to the Lauda Varioshakes with digital control.

Labor port N 96 KNF Compact and portable diaphragm vacuum pump, resistant to chemicals and corrosive (more)s, oil-free. The pump capacity is manually adjustable with a simple knob. Laboport is equipped with gas ballast, PTFE/TFM heads, PTFE lined diaphragms and FFPM valves. It is suitable for a wide range of laboratory applications, including extremely aggressive/corrosive gases and vapours. Technical features - Flow rate (max.) 7 l / min - Final vacuum (max.) 130 mbar (abs.) - Pressure (max.) 2.5 bar (rel.) - Permissible fluid temperature 5-40 °C - Valve material: FKM - Diaphragm material: PTFE coated - Pump head material: PPS Applications - Filtration - Fluid suction - Solid phase extraction Qualitative characteristics - 100% oil-free transfer: transfer, evacuation and compression of gases in a clean and safe way - Extremely small footprint - The PTFE coated diaphragm is ideal for aggressive agents / gases and corrosive vapors - Integrated control of the rotation speed - Ecological Download the data sheet for further information and accessories. NOT SURE WHICH VACUUM PUMPS YOU NEED? Try following our guide to KNF pumps: VACUUM PUMPS FOR THE LABORATORY Or download the KNF guide: THE IDEAL DIAPHRAGM PUMP FOR EVERY APPLICATION Presentations of the Laboport line directly from the specialists who created it. English subtitles. Presentation of the new Laborports and SMART KNF control.

IR sensor, VELP patent VELP Scientifica is the only company in the world to supply the technological (more) and revolutionary IR system: as soon as the test tube is detected by the sensor, the latter automatically activates the instrument, without the need for any pressure from the laboratory technician. Compared to the classic pressure mode, the patented IR sensor system guarantees a drastic reduction of the stresses perceived by the operator, increasing the comfort of the working environment. Digital Display, Better Communication and High Repeatability Simple and extremely bright digital display, easy to read and practical, with all the most important parameters such as stirring speed, time and operating mode shown on the main screen. Improved communication translates into greater efficiency. High stability on the bench 4 non-slip feet and zamak base guarantee considerable stability on the bench, making the instrument usable on many surfaces. The highly innovative ergonomic design also plays a major role.

Mini heating plates and magnetic stirrers This ruggedly built OHAUS series of small instruments can  (more)heat and mix up to 1,000ml of water on their 102 x 102mm ceramic plate. They are perfect for school labs and other applications that require simple shaking and heating on a daily basis. All models are equipped with a support rod hook with a locking knob that accommodates the optional support rod kit. Stir models include a 38mm PTFE coated magnetic stir bar. Available models: Model with heating: up to 500°C. Fixed temperature model: 500°C. Model with stirring: 500°C. Model with heating and stirring: stirring from 100 to 1200 rpm; temp. up to 500°C. Applications Boiling water, solubilization buffers and reagents, preparation media, concentration samples Operation Detachable three-wire cable and plug (included) Structure Valox armor, knobs with basic controls, 3.8cm stir bar (included with stir models), On / Off toggle switch (fixed temperature models) ___________ Not sure which model to choose? Download the Ohaus Hotplate and Shaker Selection Guide for a quick overview of all available models.

Technical features Flow rate (max.) 6 l / min Final vacuum (max.) 100 mbar (abs.) Pressure (max.) 2. (more)4 bar (rel.) Permissible fluid temperature 5-40 ° C Valve material: FFPM Diaphragm material PTFE coated Pump head material: PPS Applications Filtration Aspiration of liquids Solid phase extraction Qualitative characteristics Clean operation, 100% oil-free Corrosion resistant Compact, silent and reliable Ecological Maintenance free Download the data sheet for further information and accessories NOT SURE WHICH VACUUM PUMP YOU NEED? Try following our guide to KNF pumps: VACUUM PUMPS FOR THE LABORATORY Or download the KNF guide: THE IDEAL DIAPHRAGM PUMP FOR EVERY APPLICATION

Maximum Temperature Homogeneity The aluminum alloy plate ensures a formidable temperature homogeneit (more)y over the entire surface of the plate itself, up to 370 ° C. Low Profile, Attractive Design RC offers an innovative low profile and highly attractive design for greater user comfort. Even the inclination of the front panel has been carefully studied to facilitate its use. - The control panel is IP 42, protected against liquid spills with a drain groove - Choice of mains voltage / frequency model - Tilted control panel for easy access and visibility - Suitable for the AluBlocks ™ accessory system, which maximizes temperature control and saves handling time - Designed for maximum durability and backed by a 3-year warranty

MAGNETIC STIRRER MST - VELP The white surface of the MST instrument facilitates the detection of the (more) color change of a solution, making it suitable for many applications in the microbiological and biochemical fields and for microtitration. MST also does not overheat and maintains a low temperature even after hours of continuous use. This feature makes it ideal for BOD analysis. The compact design of the MST also makes it particularly suitable for all laboratories that have limited space. Robust and compact - Structure in technopolymer resistant to chemical agents - White surface that favors the detection of color variations - Designed to last over time Versatile and performing - Speed ​​regulation up to 1100 rpm - Stirring volume up to 5 liters - Stays cool even after hours of continuous use - Ideal for applications such as microtitering, BOD, microbiology and biochemistry - Excellent speed regulation even at low rpm - Speed ​​control with PCM type magnet

Heating thermostat from 20 to 200°C, with LCD display and simple programming functions LAUDA ECO sta (more)nds out for its range of features and ease of use. ECO thermostats are available in Silver (LCD display; simple programming) and Gold (TFT color display; complex programming) models, equipped with a mini USB interface as standard. A LAUDA innovation is the pressure flow controller located on the front of the head. This means that flow regulation between inside and outside is possible even during operation. - Monochrome LCD graphic display for simultaneous indication of actual and set values - The circulation pump can be adjusted to six levels - Integrated programmer: 1 program with max. 20 segments - Fully electronic continuous regulator with PID action - Additional key Tmax for overtemperature protection - The ECO heating thermostat line includes transparent baths up to 100°C and stainless steel up to 200°C - The most powerful units are equipped with the energy-saving LAUDA SmartCool system - Variants in 230V; the 50 Hz are also available with natural refrigerants - Convenient operation with softkey cursor - Safety class III for operation with flammable and non-flammable liquids. - mini-USB interface - Pump connections with 13mm plastic nipples as standard LAUDA tank thermostats are equipped as standard with a cooling coil. The E 4 model is also equipped with a lid for the bowl and connections for external applications. A drain cock on the rear side makes changing the heat transfer liquid easy and safe. Grafico delle prestazioni di riscaldamento dei termostati di immersione ECO Silver con vasca in acciaio inox. Performance graph of the pump pressing on the six levels. TECHNICAL VISUALIZATION Display 1 - Status display 2 - Display of the internal or external temperature value (T-int or T-ext) 3 - Soft-key bar Control panel 4 - Soft keys, left and right 5 - Enter key 6 - Cursor keys for Up, Down, Left and Right. 7 - T max key: display and adjustment of the overtemperature switch-off point 1 - USB interface 2 - Upper module receptacle approx. 51 mm x 27 mm for analog, RS 232/485 module, Profibus module and contact module 3 - Lower module receptacle approx. 51 mm x 17 mm for Pt100/LiBus module 4 - Connection socket 75S for control cable of cooling underpart for RE 1050 S 5 - Rating label 6 - Connection socket 51H for power supply between the control head and cooling underpart 7 - Mains connecting lead 1 - Cooling coil connections 2 - Pump connection: outflow and return (as standard only with E 4 S and ET 15 S) 3 - Four feet 1 - Mains connecting lead 2 - Rating label 3 - Bath draining tap 4 - Bath drain point

SCALES SUITABLE FOR EVERY USE The Navigator Series is perfect for general weighing applications in l (more)aboratory, industrial, education, retail, commercial, manufacturing, food and portioning environments. A powerful, rugged and multifunctional scale capable of handling a wide range of weighing applications with features such as fast stabilization time, overload protection four times its rated capacity and easy operation. - Excellent value for money - One-second stabilization to improve efficiency, productivity and throughput - Overload protection system, capable of withstanding loads up to four times higher than the nominal capacity: protect the scale from improper use. Applications Weighing: Determines the weight of the items on the pan in the selected unit of measure. Piece Counting: Count the number of pieces on the pan using a uniform weight. Percent Weighing: Measures the weight of a sample displayed as a percentage of a pre-set reference weight. Checkweighing: Compares the weight of a sample against the set targets. Other standard features and equipment ABS construction, stainless steel weighing pan, transport lock, menu switch and safety lock for adjustment, non-slip and adjustable feet, bubble level, mechanical and software overload/underload protection, indicator stability, low battery indicator, auto power off, user selectable print options, user selectable communication settings. MODELLI DISPONIBILI Applications Weighing, Parts Counting, Percent Weighing, Checkweighing Display Liquid Crystal Display (LCD) with backlight Operation AC adapter (included) or 4 C batteries (not included) Communication RS232, USB, or Ethernet (available as accessories) Construction ABS housing, stainless steel pan, transportation lock, slip-resistant and adjustable feet, leveling bubble Design Features Menu and calibration lock switch, mechanical and software overload/underload protection, stability indicator, low battery indicator, auto shut-off, user-selectable print options, user-selectable communication settings SUITABLE FOR ANY FIELD AND USE EDUCATIONAL: valuable overload protection system. Additionally, the portability of the Navigator balance makes it ideal for field experiments. LABORATORY: simple to clean, precise and easy to use in the laboratory. Ideal for laboratory applications such as formulation, quality inspection, testing and experimentation. INDUSTRY: Robustness, speed and accuracy, it is ideal to use in medium-light industrial applications such as paint and ink mixing, packaging, sampling and piece counting. SALES, TRADE, AND MANUFACTURING: Rugged, Portable, and Reliable. Ideal for use in shipping and receiving, retail or warehouse environments. Battery operation and counting and checkweighing modes expand the possibilities of use in hobby, inventory management, inspection and quality control. FOOD AND PORTIONING: hygiene, duration and reduced maintenance. Ideal for portioning and in pre-packaging. Units of measure such as kg, g, lb, oz, lb:oz and checkweighing and percentage checkweighing modes enhance their utility at the counter, in prep and in the kitchen.

Ohaus Navigator Portable Scale The Navigator Series is perfect for general weighing applications in  (more)laboratory, industrial and educational environments. A powerful, robust and multifunctional scale capable of handling a wide range of weighing applications with features such as fast stabilization time, overload protection four times its rated capacity and easy operation. Applications Weighing, piece counting, percentage weighing, checkweighing Display Liquid crystal display (LCD) with backlight Operation AC adapter (included) or 4 rechargeable C batteries (not included) Communication RS232, USB or Ethernet (available as accessories) Structure ABS armor, stainless steel plate, transport lock, adjustable and non-slip feet, leveling bubble Construction features Menu lockout and calibration switch, mechanical and software overload / underload protection, stability indicator, low battery indicator, automatic shutdown, user selectable print options, user selectable communication settings.