Agilent 1100 G1313A HPLC Autosampler

The Agilent 1100 G1313A autosampler is an analytical liquid chromatography autosampler for pharmaceutical quality control, environmental analysis and food analysis.

Supported sample configurations include one tray with 100 2 mL vials, a half tray with 40 2 mL vials, or a half tray with 15 6 mL Agilent vials.

The used unit was internally tested and maintained. It was refurbished where required.

The Agilent 1100 G1313A HPLC autosampler is designed for analytical liquid chromatography workflows in pharmaceutical quality control, environmental analysis and food analysis.

Sample handling

• Injection range from 0.1 to 100 µL in 0.1 µL increments
• Up to 1500 µL with multiple draw when the required hardware modification is installed
• Replicate injections from 1 to 99 per vial
• Minimum sample volume of 1 µL from a 5 µL sample in a 100 µL microvial
• Minimum sample volume of 1 µL from a 10 µL sample in a 300 µL microvial
• Sample viscosity range from 0.2 to 50 cP
• Sample capacity of 100 2 mL vials in one tray
• Capacity of 40 2 mL vials in a half tray
• Capacity of 15 6 mL Agilent vials in a half tray

Analytical performance

• Typical precision below 0.5 percent RSD of peak areas from 5 to 100 µL
• Typical precision below 1 percent RSD of peak areas from 1 to 5 µL
• Typical carryover below 0.1 percent
• Typical carryover below 0.05 percent with external needle cleaning
• Typical injection cycle time of 50 seconds, depending on draw speed and injection volume

Interfaces and functions

• Early maintenance feedback
• Electronic maintenance and error records
• Controller Area Network interface
• GPIB interface, IEEE-448
• RS232C interface
• APG remote standard
• Optional four external contact closures
• BCD vial number output
• Leak detection and leak handling
• Low voltages in maintenance areas
• Error detection and display

The unit is used and was internally tested and maintained. It was refurbished where required.

What these specifications mean

The 0.1 to 100 µL injection range covers routine analytical chromatography injections. Multiple draw can extend the injection volume to 1500 µL when the required hardware modification is installed.

Replicate injection settings from 1 to 99 injections per vial support repeated measurements from one sample position. Carryover is typically below 0.1 percent, or below 0.05 percent with external needle cleaning.