58k+ listingsShips to NLResponse within one hour+31 73 711 4717info@questpair.com

Tecan Infinite M200

This model was found in 6,390 unique locations in 68 countries, where it was mentioned from 1994 until recently.

  • plate reader
  • spectrophotometer
  • multimode
  • infinite microwell plate reader
  • instrument
  • m200PRO plate reader
  • series plate reader
locations where this model was found
6,390
countries where the model is used
68
related research fields
199
first year this model was mentioned
1994

About the Tecan Infinite M200

Questpair Analytics found the Tecan Infinite M200 at 6,390 research organisations and laboratories in 68 countries, in publications from 1994 until recently. It is used most in General Medicine, Molecular Biology and Biochemistry.

Usage over time

Mentions per year, 1994–2020

2020 has the most mentions so far.

Research fields

199 related research fields

The Tecan Infinite M200 is used by scientists in research fields such as General Medicine, Molecular Biology, Biochemistry, Molecular Medicine and Organic Chemistry.

  • General Medicine
  • Molecular Biology
  • Biochemistry
  • Molecular Medicine
  • Organic Chemistry
  • Cell Biology
  • Cancer Research
  • Oncology
  • Pharmaceutical Science
  • Microbiology
  • Genetics
  • Physical and Theoretical Chemistry
  • General Biochemistry, Genetics and Molecular Biology
  • Drug Discovery
  • General Chemistry
  • Immunology
  • Biotechnology
  • Pharmacology
  • Microbiology (medical)
  • Computer Science Applications
  • Catalysis
  • Spectroscopy
  • Inorganic Chemistry
  • Analytical Chemistry
  • Biomedical Engineering
  • Bioengineering
  • General Materials Science
  • General Physics and Astronomy
  • Physiology
  • Biomaterials
  • + 169 more

Organisations using this equipment

The model was found at 6,390 locations in 68 countries.

6,390 locations in 68 countries
OrganisationInstrumentCityCountry
Johns Hopkins University
Tecan Infinite M200BaltimoreUnited States
University of Life Sciences in
Tecan Infinite M200LublinPoland
The Scripps Research Institute
Tecan Infinite M200La JollaUnited States
Harvard University
Tecan Infinite M200CambridgeUnited States
University of Basel
Tecan Infinite M200BaselSwitzerland
University of Zurich
Tecan Infinite M200ZürichSwitzerland
25–30 of 6,390

Research that uses the Tecan Infinite M200

Only abstracts that are published under Creative Commons Attribution 4.0 are shown on this page.

Chitosan-Hydrogel Polymeric Scaffold Acts as an Independent Primary Inducer of Osteogenic Differentiation in Human Mesenchymal Stromal Cells

Regenerative medicine aims to restore damaged tissues and mainly takes advantage of human mesenchymal stromal cells (hMSCs), either alone or combined with three-dimensional scaffolds. The scaffold is generally considered a support, and its contribution to hMSC proliferation and differentiation is unknown or poorly investigated. The aim of this study was to evaluate the capability of an innovative three-dimensional gelatin–chitosan hybrid hydrogel scaffold (HC) to activate the osteogenic differentiation process in hMSCs. We seeded hMSCs from adipose tissue (AT-hMSCs) and bone marrow (BM-hMSCs) in highly performing HC of varying chitosan content in the presence of growing medium (GM) or osteogenic medium (OM) combined with Fetal Bovine Serum (FBS) or human platelet lysate (hPL). We primarily evaluated the viability and the proliferation of AT-hMSCs and BM-hMSCs under different conditions. Then, in order to analyse the activation of osteogenic differentiation, the osteopontin (OPN) transcript was absolutely quantified at day 21 by digital PCR. OPN was expressed under all conditions, in both BM-hMSCs and AT-hMSCs. Cells seeded in HC cultured with OM+hPL presented the highest OPN transcript levels, as expected. Interestingly, both BM-hMSCs and AT-hMSCs cultured with GM+FBS expressed OPN. In particular, BM-hMSCs cultured with GM+FBS expressed more OPN than those cultured with GM+hPL and OM+FBS; AT-hMSCs cultured with GM+FBS presented a lower expression of OPN when compared with those cultured with GM+hPL, but no significant difference was detected when compared with AT-hMSCs cultured with OM+FBS. No OPN expression was detected in negative controls. These results show the capability of HC to primarily and independently activate osteogenic differentiation pathways in hMCSs. Therefore, these scaffolds may be considered no more as a simple support, rather than active players in the differentiative and regenerative process.

Simona Bernardi, Federica Re, Katia Bosio, Kamol Dey, Camillo Almici, Michele Malagola, Pierangelo Guizzi, Luciana Sartore, Domenico Russo. Materials, 13 (16), 3546, 2020.

Read the publication
Biological Self-Healing of Cement Paste and Mortar by Non-Ureolytic Bacteria Encapsulated in Alginate Hydrogel Capsules

Crack formation in concrete is one of the main reasons for concrete degradation. Calcium alginate capsules containing biological self-healing agents for cementitious materials were studied for the self-healing of cement paste and mortars through in vitro characterizations such as healing agent survivability and retention, material stability, and biomineralization, followed by in situ self-healing observation in pre-cracked cement paste and mortar specimens. Our results showed that bacterial spores fully survived the encapsulation process and would not leach out during cement mixing. Encapsulated bacteria precipitated CaCO3 when exposed to water, oxygen, and calcium under alkaline conditions by releasing CO32− ions into the cement environment. Capsule rupture is not required for the initiation of the healing process, but exposure to the right conditions are. After 56 days of wet–dry cycles, the capsules resulted in flexural strength regain as high as 39.6% for the cement mortar and 32.5% for the cement paste specimens. Full crack closure was observed at 28 days for cement mortars with the healing agents. The self-healing system acted as a biological CO32− pump that can keep the bio-agents retained, protected, and active for up to 56 days of wet-dry incubation. This promising self-healing strategy requires further research and optimization.

Mohammad Fahimizadeh, Ayesha Diane Abeyratne, Lee Sui Mae, R. K. Raman Singh, Pooria Pasbakhsh. Materials, 13 (17), 3711, 2020.

Read the publication
Design and Evaluation of 223Ra-Labeled and Anti-PSMA Targeted NaA Nanozeolites for Prostate Cancer Therapy–Part I

Prostate cancer is the second most frequent malignancy in men worldwide. Unfortunately, current therapies often lead to the onset of metastatic castration-resistant prostate cancer (mCRPC), causing significant mortality. Therefore, there is an urgent need for new and targeted therapies that are advantageous over the current ones. Recently, the PSMA-targeted radioligand therapy of mCRPC has shown very promising results. In line with this, we described the synthesis of a new radioimmunoconjugate, 223RaA-silane-PEG-D2B, for targeted mCRPC therapy. The new compound consists of a NaA zeolite nanocarrier loaded with the α-particle emitting Ra-223 radionuclide, functionalized with the anti-PSMA D2B antibody. Physicochemical properties of the synthesized compound were characterized by standard methods (HR-SEM, TEM, XRD, FTIR, EDS, NTA, DLS, BET, TGA). The targeting selectivity, the extent of internalization, and cytotoxicity were determined in LNCaP C4-2 (PSMA+) and DU-145 (PSMA-) cells. Our results supported the 223RaA-silane-PEG-D2B synthesis and revealed that the final product had a diameter ca. 120 nm and specific activity 0.65 MBq/1mg. The product was characterized by a high yield of stability (>95% up to 12 days). The conjugation reaction resulted in approximately 50 antibodies/nanoparticle. The obtained radioimmunoconjugate bound specifically and internalized into PSMA-expressing LNCaP C4-2 cells, but not into PSMA-negative DU-145 cells. 223RaA-silane-PEG-D2B demonstrated also potent cytotoxicity in LNCaP C4-2 cells. These promising results require further in vivo evaluation of 223RaA-silane-PEG-D2B with regard to its toxicity and therapeutic efficacy.

Malwina Czerwińska, Giulio Fracasso, Marek Pruszyński, Aleksander Bilewicz, Marcin Kruszewski, Agnieszka Majkowska-Pilip, Anna Lankoff. Materials, 13 (17), 3875, 2020.

Read the publication
New Polyphenol-Containing LDL Nano-Preparations in Oxidative Stress and DNA Damage: A Potential Route for Cell-Targeted PP Delivery

Low-density lipoprotein (LDL) preparations of the chosen polyphenols (PPs) were prepared for the first time in the literature. The solubility of the PPs in the lipidic core of the LDL increased with the increase of their lipophilicity. The anti-/pro-oxidative properties and toxicity of LDL-entrapped PPs toward A 2780 human ovarian cancer cells were examined. The obtained preparations were found to be stable in PBS, and characterized by low toxicity. A binding affinity study revealed that the uptake of PP-loaded LDL particles is non-receptor-specific under experimental conditions. The antioxidative potential of the obtained PPs-doped LDL preparations was shown to be higher than for the PPs themselves, probably due to facilitating transport of LDL preparations into the cellular milieu, where they can interact with the cellular systems and change the redox status of the cell. The PPs-loaded LDL displayed the highest protective effect against Fenton-type reaction induced oxidative DNA damage.

Hanna Lewandowska, Monika Kalinowska. Materials, 13 (22), 5106, 2020.

Read the publication
Selective Laser Melting and Electron Beam Melting of Ti6Al4V for Orthopedic Applications: A Comparative Study on the Applied Building Direction

The 3D printing process offers several advantages to the medical industry by producing complex and bespoke devices that accurately reproduce customized patient geometries. Despite the recent developments that strongly enhanced the dominance of additive manufacturing (AM) techniques over conventional methods, processes need to be continually optimized and controlled to obtain implants that can fulfill all the requirements of the surgical procedure and the anatomical district of interest. The best outcomes of an implant derive from optimal compromise and balance between a good interaction with the surrounding tissue through cell attachment and reduced inflammatory response mainly caused by a weak interface with the native tissue or bacteria colonization of the implant surface. For these reasons, the chemical, morphological, and mechanical properties of a device need to be designed in order to assure the best performances considering the in vivo environment components. In particular, complex 3D geometries can be produced with high dimensional accuracy but inadequate surface properties due to the layer manufacturing process that always entails the use of post-processing techniques to improve the surface quality, increasing the lead times of the whole process despite the reduction of the supply chain. The goal of this work was to provide a comparison between Ti6Al4V samples fabricated by selective laser melting (SLM) and electron beam melting (EBM) with different building directions in relation to the building plate. The results highlighted the influence of the process technique on osteoblast attachment and mineralization compared with the building orientation that showed a limited effect in promoting a proper osseointegration over a long-term period.

Paola Ginestra, Rosalba Monica Ferraro, Keren Zohar-Hauber, Andrea Abeni, Silvia Giliani, Elisabetta Ceretti. Materials, 13 (23), 5584, 2020.

Read the publication
Urethane Dimethacrylate Influences the Cariogenic Properties of Streptococcus Mutans

Concerns regarding unbound monomers in dental composites have increased with the increased usage of these materials. This study assessed the biological effects of urethane dimethacrylate (UDMA), a common monomer component of dental composite resins, on the cariogenic properties of Streptococcus mutans. Changes in the growth rate, biofilm formation, interaction with saliva, surface hydrophobicity, adhesion, glucan synthesis, sugar transport, glycolytic profiles, and oxidative- and acid-stress tolerances of S. mutans were evaluated after growing the cells in the presence and absence of UDMA. The results indicated that UDMA promotes the adhesion of S. mutans to the underlying surfaces and extracellular polysaccharide synthesis, leading to enhanced biofilm formation. Furthermore, UDMA reduced the acid tolerance of S. mutans, but enhanced its tolerance to oxidative stress, thus favoring the early stage of biofilm development. UDMA did not significantly affect the viability or planktonic growth of cells, but diminished the ability of S. mutans to metabolize carbohydrates and thus maintain the level of intracellular polysaccharides, although the tendency for sugar transport increased. Notably, UDMA did not significantly alter the interactions of bacterial cells with saliva. This study suggests that UDMA may potentially contribute to the development of secondary caries around UDMA-containing dental materials by prompting biofilm formation, enhancing oxidative tolerance, and modulating carbon flow.

Kyungsun Kim, Jeong Nam Kim, Bum-Soon Lim, Sug-Joon Ahn. Materials, 14 (4), 1015, 2021.

Read the publication
Tailorable Zinc-Substituted Mesoporous Bioactive Glass/Alginate-Methylcellulose Composite Bioinks

Bioactive glasses have been used for bone regeneration applications thanks to their excellent osteoconductivity, an osteostimulatory effect, and high degradation rate, releasing biologically active ions. Besides these properties, mesoporous bioactive glasses (MBG) are specific for their highly ordered mesoporous channel structure and high specific surface area, making them suitable for drug and growth factor delivery. In the present study, calcium (Ca) (15 mol%) in MBG was partially and fully substituted with zinc (Zn), known for its osteogenic and antimicrobial properties. Different MBG were synthesized, containing 0, 5, 10, or 15 mol% of Zn. Up to 7 wt.% of Zn-containing MBG could be mixed into an alginate-methylcellulose blend (algMC) while maintaining rheological properties suitable for 3D printing of scaffolds with sufficient shape fidelity. The suitability of these composites for bioprinting applications has been demonstrated with immortalized human mesenchymal stem cells. Uptake of Ca and phosphorus (P) (phosphate) ions by composite scaffolds was observed, while the released concentration of Zn2+ corresponded to the initial amount of this ion in prepared glasses, suggesting that it can be controlled at the MBG synthesis step. The study introduces a tailorable bioprintable material system suitable for bone tissue engineering applications.

Vera Guduric, Niall Belton, Richard Frank Richter, Anne Bernhardt, Janina Spangenberg, Chengtie Wu, Anja Lode, Michael Gelinsky. Materials, 14 (5), 1225, 2021.

Read the publication

About Questpair Analytics

Questpair Analytics inventorises the usage of scientific equipment such as the Tecan Infinite M200 in research organisations and laboratories around the world. Our goal is to make it easier for professionals in research and industry to discover the availability and use cases for specific types of laboratory equipment.

We also identify locations where different brands and models are used, which we believe can help to facilitate a more efficient and circular usage of existing instruments. For example, researchers and makers can use our services to find the necessary equipment that is required to complete a specific research purpose or to analyze or create advanced materials.

Explore Questpair Analytics

Disclaimer: The data on this site is intended for educational purposes only. QuestPair assumes no responsibility or liability for any errors or omissions in the content of this site. The information contained in this site is provided and presented on an “as is” basis with no guarantees of completeness, accuracy, usefulness or timeliness.

We find the unfindable