Analytical instruments

Large-size additional display is an accessory of load-cell scales. stainless steel housing 6 digits  (more)of 4,5 inches in height (11,2cm) white diode backlight Features Robust and Resistant Stainless Steel Housing The WWG-2 LCD display is housed in a stainless steel housing, which enables its operation in harsh industry conditions. The display can be installed on the table top or mounted on the wall. The WWG-2 LCD features white diode backlight and clear display indicating digits of 4.5" (11.2cm) height. Communication Communication with indicators (weighing instruments) is carried out via RS22 or RS485 connectors. Depending on the installation option, the display is powered by 230VAC or 7-24VAC.

Large-size additional display, model WWG-2, is designed as a LCD display for cooperation with RADWAG (more) scales. The display can indicate up to 6 digits each with 4,5 inches in height (11,2cm). The display is equipped with an assembly jig for hanging on a wall. Area of use: Mainly WWG-2 large size display is used as: Additional equipment for load cell industrial scales; and for Increasing scale functionality – presentation of weighing result on a large size display. Design: WWG-2 is an LCD large size display with diodes backlit in white colour. The display is placed in a stainless steel housing. Communication with a scale is realized through RS232, RS485 or optionally through Ethernet interfaces. Depending of version, the WWG-2 large size display can be powered from 230VAC or 7-24VAC. Communication through RS232, power supply 230VAC. Main application as option for terminal PUE 7 series. Maximum length of RS232 connecting cable is 10m.

Large-size additional display is an accessory of load-cell scales. stainless steel housing 6 digits  (more)of 4,5 inches in height (11,2cm) white diode backlight Features Robust and Resistant Stainless Steel Housing The WWG-2 LCD display is housed in a stainless steel housing, which enables its operation in harsh industry conditions. The display can be installed on the table top or mounted on the wall. The WWG-2 LCD features white diode backlight and clear display indicating digits of 4.5" (11.2cm) height. Communication Communication with indicators (weighing instruments) is carried out via RS22 or RS485 connectors. Depending on the installation option, the display is powered by 230VAC or 7-24VAC.

Large-size additional display is an accessory of load-cell scales. stainless steel housing 6 digits  (more)of 4,5 inches in height (11,2cm) white diode backlight Features Robust and Resistant Stainless Steel Housing The WWG-2 LCD display is housed in a stainless steel housing, which enables its operation in harsh industry conditions. The display can be installed on the table top or mounted on the wall. The WWG-2 LCD features white diode backlight and clear display indicating digits of 4.5" (11.2cm) height. Communication Communication with indicators (weighing instruments) is carried out via RS22 or RS485 connectors. Depending on the installation option, the display is powered by 230VAC or 7-24VAC.

Additional LCD display in plastic housing and on a stand. The display enables presentation of the we (more)ighing result in a place distant from the balance workplace. It features an additional information line which allows to display additional messages and data.

Additional WD-4/8 LCD display has been designed to connect PUE C315 indicator. The display is equipp (more)ed with a plastic housing and LED backlight. It is powered from a balance indicator. Features: Automatic baud rate recognition Screen saver

Additional WD-4/6 LCD display has been designed to connect with automatic scales. The display is equ (more)ipped with a stainless steel housing and LED backlight. It is powered from a balance indicator. Features: Automatic baud rate recognition Screen saver

Additional WD-4/5 LCD display has been designed to connect with automatic scales. The display is equ (more)ipped with a plastic housing and LED backlight. It is powered from a balance indicator. Features: Automatic baud rate recognition Screen saver

Additional WD-4/4 LCD display has been designed to connect with PUE 7 indicator via D-SUB 15 connect (more)or (male plug). The display is equipped with a plastic housing and LED backlight. It is powered from a balance indicator. Features: Automatic baud rate recognition Screen saver

Additional WD-4/3 LCD display has been designed to connect with scales operated via PUE H315, MW-01- (more)Ax, PUE HX7, PUE HY10, PUE5 indicator. It is to be purchased with a scale in a set exclusively. The display is equipped with a stainless steel housing and a cable with 8-pin connector (IP67). Features: Automatic baud rate recognition Screen saver LCD backlight Power supply source: the terminal (scale)

The newest line of Radwag Mass Comparators enables adjusting mass standards and weights according to (more) the OIML recommendations (R-111) from 1 mg to 5 kg for E1 class and lower. Mass comparators are used both for ensuring traceability of mass measurements, and verification of weights in accordance with the principles of legal metrology. RADWAG Mass Comparators have gained recognition among Accredited Calibration Laboratories in many countries. Mass comparator WAY 5Y.KO series similarly to other models, comprises two components. One of them holds the electronic module, and the other precise mechanical measuring system. The WAY 5Y.KO series comes standard with an aesthetic, large weighing chamber with glass anti-draft shield. All elements of the weighing chamber are manufactured from glass or metal to minimize the influence of electrostatic charges on weighing result. Mass comparator WAY 5Y.KO series features an intuitive menu supporting a user while operating the instrument.

The newest line of Radwag Mass Comparators enables adjusting mass standards and weights according to (more) the OIML recommendations (R-111) from 1 mg to 5 kg for E1 class and lower. Mass comparators are used both for ensuring traceability of mass measurements, and verification of weights in accordance with the principles of legal metrology. RADWAG Mass Comparators have gained recognition among Accredited Calibration Laboratories in many countries. Mass comparator WAY 5Y.KO series similarly to other models, comprises two components. One of them holds the electronic module, and the other precise mechanical measuring system. The WAY 5Y.KO series comes standard with an aesthetic, large weighing chamber with glass anti-draft shield. All elements of the weighing chamber are manufactured from glass or metal to minimize the influence of electrostatic charges on weighing result. Mass comparator WAY 5Y.KO series features an intuitive menu supporting a user while operating the instrument.

The newest line of Radwag Mass Comparators enables adjusting mass standards and weights according to (more) the OIML recommendations (R-111) from 1 mg to 5 kg for E1 class and lower. Mass comparators are used both for ensuring traceability of mass measurements, and verification of weights in accordance with the principles of legal metrology. RADWAG Mass Comparators have gained recognition among Accredited Calibration Laboratories in many countries. Mass comparator WAY 5Y.KO series similarly to other models, comprises two components. One of them holds the electronic module, and the other precise mechanical measuring system. The WAY 5Y.KO series comes standard with an aesthetic, large weighing chamber with glass anti-draft shield. All elements of the weighing chamber are manufactured from glass or metal to minimize the influence of electrostatic charges on weighing result. Mass comparator WAY 5Y.KO series features an intuitive menu supporting a user while operating the instrument.

The newest line of Radwag Mass Comparators enables adjusting mass standards and weights according to (more) the OIML recommendations (R-111) from 1 mg to 5 kg for E1 class and lower. Mass comparators are used both for ensuring traceability of mass measurements, and verification of weights in accordance with the principles of legal metrology. RADWAG Mass Comparators have gained recognition among Accredited Calibration Laboratories in many countries. Mass comparator WAY 5Y.KO series similarly to other models, comprises two components. One of them holds the electronic module, and the other precise mechanical measuring system. The WAY 5Y.KO series comes standard with an aesthetic, large weighing chamber with glass anti-draft shield. All elements of the weighing chamber are manufactured from glass or metal to minimize the influence of electrostatic charges on weighing result. Mass comparator WAY 5Y.KO series features an intuitive menu supporting a user while operating the instrument.

The newest line of Radwag Mass Comparators enables adjusting mass standards and weights according to (more) the OIML recommendations (R-111) from 1 mg to 5 kg for E1 class and lower. Mass comparators are used both for ensuring traceability of mass measurements, and verification of weights in accordance with the principles of legal metrology. RADWAG Mass Comparators have gained recognition among Accredited Calibration Laboratories in many countries. Mass comparator WAY 5Y.KO series similarly to other models, comprises two components. One of them holds the electronic module, and the other precise mechanical measuring system. The WAY 5Y.KO series comes standard with an aesthetic, large weighing chamber with glass anti-draft shield. All elements of the weighing chamber are manufactured from glass or metal to minimize the influence of electrostatic charges on weighing result. Mass comparator WAY 5Y.KO series features an intuitive menu supporting a user while operating the instrument.

The newest line of Radwag Mass Comparators enables adjusting mass standards and weights according to (more) the OIML recommendations (R-111) from 1 mg to 5 kg for E1 class and lower. Mass comparators are used both for ensuring traceability of mass measurements, and verification of weights in accordance with the principles of legal metrology. RADWAG Mass Comparators have gained recognition among Accredited Calibration Laboratories in many countries. Mass comparator WAY 5Y.KO series similarly to other models, comprises two components. One of them holds the electronic module, and the other precise mechanical measuring system. The WAY 5Y.KO series comes standard with an aesthetic, large weighing chamber with glass anti-draft shield. All elements of the weighing chamber are manufactured from glass or metal to minimize the influence of electrostatic charges on weighing result. Mass comparator WAY 5Y.KO series features an intuitive menu supporting a user while operating the instrument.

The newest line of Radwag Mass Comparators enables adjusting mass standards and weights according to (more) the OIML recommendations (R-111) from 1 mg to 5 kg for E1 class and lower. Mass comparators are used both for ensuring traceability of mass measurements, and verification of weights in accordance with the principles of legal metrology. RADWAG Mass Comparators have gained recognition among Accredited Calibration Laboratories in many countries. Mass comparator WAY 5Y.KO series similarly to other models, comprises two components. One of them holds the electronic module, and the other precise mechanical measuring system. The WAY 5Y.KO series comes standard with an aesthetic, large weighing chamber with glass anti-draft shield. All elements of the weighing chamber are manufactured from glass or metal to minimize the influence of electrostatic charges on weighing result. Mass comparator WAY 5Y.KO series features an intuitive menu supporting a user while operating the instrument.

The newest line of Radwag Mass Comparators enables adjusting mass standards and weights according to (more) the OIML recommendations (R-111) from 1 mg to 5 kg for E1 class and lower. Mass comparators are used both for ensuring traceability of mass measurements, and verification of weights in accordance with the principles of legal metrology. RADWAG Mass Comparators have gained recognition among Accredited Calibration Laboratories in many countries. Mass comparator WAY 5Y.KO series similarly to other models, comprises two components. One of them holds the electronic module, and the other precise mechanical measuring system. The WAY 5Y.KO series comes standard with an aesthetic, large weighing chamber with glass anti-draft shield. All elements of the weighing chamber are manufactured from glass or metal to minimize the influence of electrostatic charges on weighing result. Mass comparator WAY 5Y.KO series features an intuitive menu supporting a user while operating the instrument.

The newest line of Radwag mass comparators enables adjusting mass standards and weights according to (more) the OIML recommendations (R-111) from 1mg to 5 g in class E1 and lower. Mass comparators are used for both, ensuring traceability of mass measurements and verification of weights in accordance with the principles of legal metrology. RADWAG Mass Comparators have gained recognition among Accredited Calibration Laboratories in many countries. The standard equipment of the UYA 5Y.KO mass comparator is an anti-draft chamber eliminating imperfect conditions in weighing rooms (air drafts). The mass comparator is placed inside the anti-draft chamber. Sliding side panes enable easy access to the weighing chamber. Mass comparator UYA 5Y.KO series, comprises two components. One of them holds the electronic module, and the other precise mechanical measuring system. Such solution guarantees elimination of temperature influence (warming of electronic elements) on the comparator's indications. The comparator features an aesthetic, cylindrically shaped weighing chamber with glass draft shield and automatic door opening system. All elements of the weighing chamber are manufactured from glass or metal to minimize the influence of electrostatic charges on the measuring result. CAUTION: In order to carry out the weighing process by means of microbalance and ultra-microbalances correctly, it is necessary to prepare the workstation and to operate the device as required. Usage and installation guidelines are to found in the following document: Installation and usage conditions for ultra-microbalances and microbalances.

Do you need a balance that not only determines weight with impressive accuracy, but also performs a  (more)digital audit, responds to your voice commands and sends you light messages? If so, learn about the functionality of the ELLIPSIS series of balances: Ultra-Microbalance UYA The UYA Ultra-Microbalance is designed to meet the demanding requirements for high-precision mass measurement. Each ultra-microbalance has an automatic adjustment that records temperature changes and eliminates indication deviations that result from an unstable working environment. As a result, automatic adjustment improves measurement readability. The ultra-microbalance consists of two components located in separate housings: a weighing terminal and a precision mechanical measuring system. The two-element design of the ultra-microbalance eliminates the risk of temperature changes and mutual vibration transmission. Essential equipment for ultra-micro scales Standard equipment of the ultra-microbalance is an anti-draft chamber, which reduces the influence of air movements and air drafts in weighing rooms on measurement results. The ultra-microbalance is placed inside the chamber, and slidable side doors provide unbounded access to the weighing chamber. All components of the balance are made of glass or aluminum, which eliminates the influence of electrostatic fields. NOTE: for the correct implementation of the weighing process with ultra-microbalances, the following are required: a properly prepared workspace and proper operation of the balance. It is recommended to use antivibration tables with a granite stabilizing plate for ultra-microbalances. Functionality of the ELLIPSIS series: Digital Weighing Auditor Ensures that your balance is ready for use. It enables air buoyancy compensation in real-time. What is more, it informs about the need for a balance inspection or a periodic audit of the balance’s accuracy and sensitivity. 10-Inch Display Bigger screen – 10’’ – means more information in one place. On the new ELLIPSIS terminal, you will see up to 3 screens, widgets, graphs, statuses, notes, handy measurement history. Uncompromising User Verification For the first time ever, the balance will verify the user using a password, RFID card, fingerprint reader, facial recognition mechanism, or any combination of these. Ambient Light – An Innovative Way for the Balance to Communicate With the User The light colour will tell you about status, process results, procedures, or alerts. Hotspot Use the balance on any device connected to it. This can be a smartphone, tablet, or computer. RFID ELLIPSIS works with RFID tags* that can be used to tag your products or formulation ingredients in the database. They can also be used to identify a user. Live Note – Note Down Your Conclusions It’s the first time you can add a voice memo to a measurement series or procedure report. If you prefer to write it down, ELLIPSIS allows you to add a text note. Handy Library This is where a series of recent measurements or a report ready for digital signature, according to 21 CFR Part 11, can be found. Widgets Prepared to display what you need most at any given moment. Automatic Leveling of the Balance ReflexLEVEL System Instead of manually leveling your scale - level it automatically. The ReflexLEVEL System saves you time and gives you maximum precision in your measurements. Smart Min Weight The balance displays whether the value of the weight you want to weigh is below or above the minimum weight threshold. 21 CFR Part 11 Do you work in the pharmaceutical industry? Do you need a digital signature? We are offering the laboratory balance which as a standalone fully meets the requirements of 21 CFR Part 11/ EU GMP Annex 11. - Full data security - Electronic signatures - Validations - Electronic records - Audit trails Modbus TCP/IP is one of the most popular communication protocols in industrial automation. Implementing it in the 5Y balances and CY10 scales makes the devices of this series friendly to automation integrators. A balance or scale in a Modbus system is a slave device and performs tasks specified by the master device which is most often a PLC. Protocol Modbus TCP/IP in the 5Y balances and C10 scales enables, among other things, the realization of mass readout, zeroing and tare functions of the device, as well as tare settings and MIN and MAX thresholds. Two-point adjustment Adjacency, which takes place at two measurement points instead of one, improves measurement precision over the full weighing range. And what does this mean for you? More accurate measurement. * RFID ISO/IEC 14443 Type A, 13.56 MHz

Do you need a balance that not only determines weight with impressive accuracy, but also performs a  (more)digital audit, responds to your voice commands and sends you light messages? If so, learn about the functionality of the ELLIPSIS series of balances: Ultra-Microbalance UYA The UYA Ultra-Microbalance is designed to meet the demanding requirements for high-precision mass measurement. Each ultra-microbalance has an automatic adjustment that records temperature changes and eliminates indication deviations that result from an unstable working environment. As a result, automatic adjustment improves measurement readability. The ultra-microbalance consists of two components located in separate housings: a weighing terminal and a precision mechanical measuring system. The two-element design of the ultra-microbalance eliminates the risk of temperature changes and mutual vibration transmission. Essential equipment for ultra-micro scales Standard equipment of the ultra-microbalance is an anti-draft chamber, which reduces the influence of air movements and air drafts in weighing rooms on measurement results. The ultra-microbalance is placed inside the chamber, and slidable side doors provide unbounded access to the weighing chamber. All components of the balance are made of glass or aluminum, which eliminates the influence of electrostatic fields. NOTE: for the correct implementation of the weighing process with ultra-microbalances, the following are required: a properly prepared workspace and proper operation of the balance. It is recommended to use antivibration tables with a granite stabilizing plate for ultra-microbalances. Functionality of the ELLIPSIS series: Digital Weighing Auditor Ensures that your balance is ready for use. It enables air buoyancy compensation in real-time. What is more, it informs about the need for a balance inspection or a periodic audit of the balance’s accuracy and sensitivity. 10-Inch Display Bigger screen – 10’’ – means more information in one place. On the new ELLIPSIS terminal, you will see up to 3 screens, widgets, graphs, statuses, notes, handy measurement history. Uncompromising User Verification For the first time ever, the balance will verify the user using a password, RFID card, fingerprint reader, facial recognition mechanism, or any combination of these. Ambient Light – An Innovative Way for the Balance to Communicate With the User The light colour will tell you about status, process results, procedures, or alerts. Hotspot Use the balance on any device connected to it. This can be a smartphone, tablet, or computer. RFID ELLIPSIS works with RFID tags* that can be used to tag your products or formulation ingredients in the database. They can also be used to identify a user. Live Note – Note Down Your Conclusions It’s the first time you can add a voice memo to a measurement series or procedure report. If you prefer to write it down, ELLIPSIS allows you to add a text note. Handy Library This is where a series of recent measurements or a report ready for digital signature, according to 21 CFR Part 11, can be found. Widgets Prepared to display what you need most at any given moment. Automatic Leveling of the Balance ReflexLEVEL System Instead of manually leveling your scale - level it automatically. The ReflexLEVEL System saves you time and gives you maximum precision in your measurements. Smart Min Weight The balance displays whether the value of the weight you want to weigh is below or above the minimum weight threshold. 21 CFR Part 11 Do you work in the pharmaceutical industry? Do you need a digital signature? We are offering the laboratory balance which as a standalone fully meets the requirements of 21 CFR Part 11/ EU GMP Annex 11. - Full data security - Electronic signatures - Validations - Electronic records - Audit trails Modbus TCP/IP is one of the most popular communication protocols in industrial automation. Implementing it in the 5Y balances and CY10 scales makes the devices of this series friendly to automation integrators. A balance or scale in a Modbus system is a slave device and performs tasks specified by the master device which is most often a PLC. Protocol Modbus TCP/IP in the 5Y balances and C10 scales enables, among other things, the realization of mass readout, zeroing and tare functions of the device, as well as tare settings and MIN and MAX thresholds. Two-point adjustment Adjacency, which takes place at two measurement points instead of one, improves measurement precision over the full weighing range. And what does this mean for you? More accurate measurement. * RFID ISO/IEC 14443 Type A, 13.56 MHz

Ultra-Microbalance for Filters The UYA 5Y.F Ultra-Microbalance is used to determine absorption in th (more)e process of differential filter mass measurement with the highest readability [d] of 0.1 µg. For this reason, in addition to the regular weighing pan, the UYA 5Y.F has a weighing pan for filters. UYA 2.5Y.F Ultra-Microbalance The device is also equipped with an automatically weighing chamber, which thanks to infrared (IR) sensors, can be opened by gestures. This solution makes it possible to obtain more accurate measurement results. In turn, the ReflexLEVEL System used in the UYA 5Y.F Ultra-Microbalance enables its automatic levelling. Automatic levelling is more convenient than semi-automatic and manual ones, saves time, and, above all, guarantees model position of the measuring system and gives maximally precise measurement results. 5Y PLUS Balances (Reflex Level System, Smart Min Weight, Two-Point Adjustment and Much More) – You Have It Already. With ELLIPSIS Balances, You Have the Same and More: Digital Weighing Auditor Ensures that your balance is ready for use. It enables air buoyancy compensation in real-time. What is more, it informs about the need for a balance inspection or a periodic audit of the balance’s accuracy and sensitivity. 10-Inch Display Bigger screen – 10’’ – means more information in one place. On the new ELLIPSIS terminal, you will see up to 3 screens, widgets, graphs, statuses, notes, handy measurement history. Uncompromising User Verification For the first time ever, the balance will verify the user using a password, RFID card, fingerprint reader, facial recognition mechanism, or any combination of these. Ambient Light – An Innovative Way for the Balance to Communicate With the User The light colour will tell you about status, process results, procedures, or alerts. Hotspot Use the balance on any device connected to it. This can be a smartphone, tablet, or computer. RFID ELLIPSIS works with RFID tags* that can be used to tag your products or formulation ingredients in the database. They can also be used to identify a user. Live Note – Note Down Your Conclusions It’s the first time you can add a voice memo to a measurement series or procedure report. If you prefer to write it down, ELLIPSIS allows you to add a text note. Handy Library This is where a series of recent measurements or a report ready for digital signature, according to 21 CFR Part 11, can be found. Widgets Prepared to display what you need most at any given moment. Automatic Leveling of the Balance ReflexLEVEL System Instead of manually leveling your scale - level it automatically. The ReflexLEVEL System saves you time and gives you maximum precision in your measurements. Smart Min Weight The balance displays whether the value of the weight you want to weigh is below or above the minimum weight threshold. 21 CFR Part 11 Do you work in the pharmaceutical industry? Do you need a digital signature? We are offering the laboratory balance which as a standalone fully meets the requirements of 21 CFR Part 11/ EU GMP Annex 11. - Full data security - Electronic signatures - Validations - Electronic records - Audit trails Modbus TCP/IP is one of the most popular communication protocols in industrial automation. Implementing it in the 5Y balances and CY10 scales makes the devices of this series friendly to automation integrators. A balance or scale in a Modbus system is a slave device and performs tasks specified by the master device which is most often a PLC. Protocol Modbus TCP/IP in the 5Y balances and C10 scales enables, among other things, the realization of mass readout, zeroing and tare functions of the device, as well as tare settings and MIN and MAX thresholds. Two-point adjustment Adjacency, which takes place at two measurement points instead of one, improves measurement precision over the full weighing range. And what does this mean for you? More accurate measurement.

A rack for under-pan weighing intended for XA balances. The rack is designed for weighing loads requ (more)iring carrying out the measuring process outside the main weighing platform, e.g. loads with non-standard dimensions and sizes and those generating a magnetic field. The rack also facilitates determining density of loads. The rack is available in powder coated mild steel finishing.

A rack for under-pan weighing intended for AS and PS balances. The rack is designed for weighing loa (more)ds requiring carrying out the measuring process outside the main weighing platform, e.g. loads with non-standard dimensions and sizes and those generating a magnetic field. The rack also facilitates determining density of loads. The rack is available in powder coated mild steel finishing.

A hook that allows under-pan weighing. It is compatible with XA, AS and PS series balances.

A hook that allows under-pan weighing. It is compatible with PM, WLC and WLY series precision balanc (more)es.

The UMA 2.5Y.FC automatic weighing system has been designed to test mass changes of filters made of  (more)quartz glass fibre, glass fibre, teflon and teflon covered with glass fibre. Mass measurement is carried out with readability of 1 μg or 0.1 μg. The weighing system enables conditioning filters in accordance with PN-EN 14907 and PN-EN 12341 standards. Effective and Excellent Measurement The UMA 2.5Y.FC automatic weighing system is a first-class solution for professional mass measurement. Dynamic control and correction of mass indications both ensure fast and stable weighing regardless of the weighed filter type. The UMA weighing systems, due to the elimination of the human factor, temperature changes and air drafts, guarantee excellent measurement repeatability. Effective Weighing Analysis Full automation of the weighing cycle, thanks to the elimination of the ‚human factor’, is a guarantee of measurement repeatability impossible to be obtained in case of manual weighing. Remote programming of measurement processes significantly increases operation efficiency. Dedicated Software The RMCS Filters software allows to manage time and comparison test plans of each filter or filter series. Summary reports and report components are defined by the system administrator. Metrological Control Periodically, correctness of weighing system operation is verified via a certified mass standard or a reference filter. Stable Mechanical Design The UMA 2.5Y.FC automatic weighing system is equipped with an integrated anti-vibration table ensuring the greatest stability of mass measurements. Ambient Conditions Module The ambient conditions module is housed inside the bottom part of the weighing system. This results with a laminar air flow that does not disturb the ongoing filter mass measurement. The range of temperature and humidity changes is automatically forced in accordance with the values programmed via device terminal. Climate Chamber The integrated climatic chamber guarantees constant ambient conditions in the chamber, ensuring proper filter conditioning in accordance with the PN-EN 12341:2014 standard: stability of operating temperature: ± 1oC, stability of relative humidity: ± 2.5%, the operating humidity in the climate chamber during the process: 30–60%, the room temperature during operation must remain within the range of 19-25°C, and the relative humidity should oscillate between 40–60%.

The UMA 2.5Y.F automatic weighing system has been designed to test mass changes of filters made of  (more)quartz glass fibre, glass fibre, teflon and teflon covered with glass fibre. Mass measurement is carried out with readability of 1 μg or 0.1 μg. The weighing system enables conditioning filters in accordance with PN-EN 14907 and PN-EN 12341 standards. Effective and Excellent Measurement The UMA 2.5Y.F automatic weighing system is a first-class solution for professional mass measurement. Dynamic control and correction of mass indications both ensure fast and stable weighing regardless of the weighed filter type. The UMA weighing systems, due to the elimination of the human factor, temperature changes and air drafts, guarantee excellent measurement repeatability. Effective Weighing Analysis Full automation of the weighing cycle, thanks to the elimination of the ‚human factor’, is a guarantee of measurement repeatability impossible to be obtained in case of manual weighing. Remote programming of measurement processes significantly increases operation efficiency. Dedicated Software The RMCS Filters software allows to manage time and comparison test plans of each filter or filter series. Summary reports and report components are defined by the system administrator. Metrological Control Periodically, correctness of weighing system operation is verified via a certified mass standard or a reference filter. Compact Design The UMA 2.5Y.F automatic weighing system can be easily adapted to any laboratory conditions. The device size facilitates its placing on the anti-vibration table of standard dimensions. Ambient Conditions Module The ambient conditions module is housed inside the bottom part of the weighing system. This results with a laminar air flow that does not disturb the ongoing filter mass measurement. The range of temperature and humidity changes is automatically forced in accordance with the values programmed via device terminal.

Mass comparators of UMA 5 series stand for the highest standard of professional automatic mass compa (more)rators. They provide comparison of 1 mg – 5 g weights of E1 and lower classes. The device is equipped with 36 magazine positions allowing to deposit up to 36 weights. This solution allows to perform either comparison for complete set of weights carried out within one process or comparison for just a few weights of the same mass. Owing to elimination of human factor and with temperature changes and air drafts reduced to zero, UMA automatic mass comparators provide the highest possible measurement repeatability.

Mass comparators of UMA 200 series stand for the highest standard of professional automatic mass com (more)parators. They provide comparison of 10 g – 200 g weights of E1 and lower classes. The device is equipped with 36 magazine positions allowing to deposit up to 36 weights. This solution allows to perform either comparison for complete set of weights carried out within one process or comparison for just a few weights of the same mass. Owing to elimination of human factor and with temperature changes and air drafts reduced to zero, UMA automatic mass comparators provide the highest possible measurement repeatability.