Analytical instruments

The AP-12.1.5Y is the first automatic device designed to calibrate single- and multi-channel micropi (more)pettes with [d] 1 µg, in accordance with ISO 8655 requirements. Pipette calibration can be performed in the volume range from 0.5 μl a maximum of 12 channels of fixed and variable volume pipettes. The impressive calibration readability is the result of the co-called separation chamber which stabilizes the measurement path and protects it from excessive air movement. This is a guarantee of high precision measurements. AP-12.1.5Y guarantees the comfort of work. The ergonomic design of the device makes it possible to empty weighing vessels, and their overfilling is signalled by Ambient Light. When calibrating a multichannel pipette, a pump is used to simultaneously remove water from four vessels, greatly reducing the time required for pipette calibration. Other factors that affect the ergonomics of work: compact, mobile design clear, intuitive multilingual menu data security transfer of results directly to the customer’s computer application internal procedure report automatic periodic adjustment of the device. After emptying a 12-channel pipette, the AP-12.1.5Y checks all channels in a single cycle. In addition to a database of pipette calibration reports, the AP-12.1.5Y includes a database of pipettes that is editable and contains maximum permissible error values according to ISO 8655. The report database, in turn, contains measurements and error values calculated for individual points and volumes. The user determines the format and content of the reports. The AP-12.1.5Y monitors the ambient conditions using calibrated sensors: THB S (ambient conditions measurement) and THB W (liquid temperature measurement), in accordance with ISO 8655. To calibrate the device with mass standards, the weighing pan must be replaced with a pan dedicated to checking and calibrating the balance (both are included in the standard equipment). When purchasing the AP-12.1.5Y, you get: two calibrated sensors: THB S and THB W, two weighing pans: standard, and for balance test and calibration, a pump equipped with two nozzles: to draw water from one container or from four containers at once, a brush, a pincette, a vessel for the liquid, the Calibration Certificate for the balance.

The anti-draft chamber is an optional accessory intended for XA 4Y and XA 5Y balances working in unf (more)avourable conditions (air-drafts). It is mounted on a table, inside the balance is placed. The chamber features sliding side panes allowing free access to the weighing chamber of the balance. CAUTION: The anti-draft chamber is to be used in a set with a granite anti-vibration table exclusively. It cannot be used with the anti-vibration table intended for laboratory balances.

The anti-draft chamber is an optional accessory intended for microbalances working in unfavourable c (more)onditions (air-drafts). It is mounted on a table, inside the microbalance is placed. The chamber features sliding side panes allowing free access to the weighing chamber of the microbalance. CAUTION: The anti-draft chamber is to be used in a set with a granite anti-vibration table exclusively. It cannot be used with the anti-vibration table intended for laboratory balances.

The anti-draft chamber is an optional accessory intended for WAY KO mass comparators working in unfa (more)vourable conditions (air-drafts). It is mounted on a table, inside the mass comparator is placed. The chamber features sliding top and side panes allowing free access to the weighing chamber of the mass comparator. All components of the anti-draft chamber are made of metal and glass with conductive coating eliminating influence of electrostatics on the weighing result.

An additional anti-draft chamber dedicated for mass comparators APP KO series. It is intended for in (more)struments operating in unfavourable conditions (air movement, air gusts). The anti-draft chamber is installed on a weighing table, and a mass comparator is placed inside the chamber. The chamber features slidable side and top glass doors, thus ensuring free access to mass comparator’s weighing chamber. All components of the anti-draft chamber are made of metal and glass with conductive coating for eliminating influence of electrostatics on a measurement result.

An additional anti-draft chamber dedicated for mass comparators APP KO series. It is intended for in (more)struments operating in unfavourable conditions (air movement, air gusts). The anti-draft chamber is installed on a weighing table, and a mass comparator is placed inside the chamber. The chamber features slidable side and top glass doors, thus ensuring free access to mass comparator’s weighing chamber. All components of the anti-draft chamber are made of metal and glass with conductive coating for eliminating influence of electrostatics on a measurement result.

An additional anti-draft chamber dedicated for mass comparator APP.64.5Y.KO. It is intended for inst (more)ruments operating in unfavourable conditions (air movement, air gusts). The anti-draft chamber is installed on a weighing table, and a mass comparator is placed inside the chamber. The chamber features slidable side and top glass doors, thus ensuring free access to mass comparator’s weighing chamber. All components of the anti-draft chamber are made of metal and glass with conductive coating for eliminating influence of electrostatics on a measurement result.

The anti-draft chamber is intended for balances featuring a weighing pan 128×128 mm. It is an  (more)optional equipment for balances operating in unfavourable ambient conditions (air movement air drafts). It is installed as replacement of a standard pan draft shield. The anti-draft chamber features slidable top and side doors ensuring unbounded access to the weighing pan.

The anti-draft chamber is intended for balances featuring a weighing pan 128×128 mm. It is an  (more)optional equipment for balances operating in unfavourable ambient conditions (air movement air drafts). It is installed as replacement of a standard pan draft shield. The anti-draft chamber features slidable top and side doors ensuring unbounded access to the weighing pan.

The Alibi Reader is intended to read measurements stored in the ALIBI memory that were carried out v (more)ia the following balances and terminals: X2 series balances R series balances MA X2.A moisture analyzers MA R moisture analyzers PUE C32 terminal PUE HX5.EX terminal PUE HX7 terminal ALIBI Memory The ALIBI memory stores all measurements carried out by the X2 and R series balances and moisture analyzers. The ALIBI memory cannot be modified or deleted, therefore it may be called a black box of the balance. It is possible to export the ALIBI memory and other databases of a given balance to a USB flash drive. A previously exported file with the ALIBI memory saved to it can be read on a PC computer using the Alibi Reader. The data can be filtered (e.g. by date, by user code, by product etc.) The data are saved to CSV file. The Alibi Reader not only presents measurement readouts but it also enables reports generation. The reports can be generated from selected measurements and saved as XLS, DOC or PDF files. The latest software version: 0.0.5.6 Functions: Any previously exported file containing the ALIBI memory can be read on a PC computer; Operation of weighing instruments equipped with the PUE C32 terminal; Data filtering and reports generation; Saving ALIBI database to CSV file; Databases filtering; Language versions available: Polish, English, German, French, Spanish.

Application: Mass comparator AKM-2 series featuring automatic mass loader enables automatic determin (more)ation of mass deviations of a single weight in a single cycle. The system of automatic mass comparator is commonly applicable in mass measuring laboratories, and particularly in certification units for weights classes E, F and M. Design and functionality: The supervising part of a mass comparator is a digital module which cooperates with a controller of instrument’s mechanical components. The automatic mass loader features a basis with self-centring fields, a robot and a steel body. The digital module and the robot are located in mass comparator’s weighing chamber. The loading robot is controlled by the computer’s controller. The instrument is operated by means of digital display which is plugged to mass comparator’s controller. Lengthwise shift of the loading robot with weights is carried out automatically using solenoid actuators. Additional software functions enable loading and taking off the weights, data processing and storing, and data export to instrument’s memory.

Application: Mass comparator AKM-2 series featuring automatic mass loader enables automatic determin (more)ation of mass deviations of a single weight in a single cycle. The system of automatic mass comparator is commonly applicable in mass measuring laboratories, and particularly in certification units for weights classes E, F and M. Design and functionality: The supervising part of a mass comparator is a digital module which cooperates with a controller of instrument’s mechanical components. The automatic mass loader features a basis with self-centring fields, a robot and a steel body. The digital module and the robot are located in mass comparator’s weighing chamber. The loading robot is controlled by the computer’s controller. The instrument is operated by means of digital display which is plugged to mass comparator’s controller. Lengthwise shift of the loading robot with weights is carried out automatically using solenoid actuators. Additional software functions enable loading and taking off the weights, data processing and storing, and data export to instrument’s memory.

Application: Mass comparator AKM-2 series featuring automatic mass loader enables automatic determin (more)ation of mass deviations of a single weight in a single cycle. The system of automatic mass comparator is commonly applicable in mass measuring laboratories, and particularly in certification units for weights classes E, F and M. Design and functionality: The supervising part of a mass comparator is a digital module which cooperates with a controller of instrument’s mechanical components. The automatic mass loader features a basis with self-centring fields, a robot and a steel body. The digital module and the robot are located in mass comparator’s weighing chamber. The loading robot is controlled by the computer’s controller. The instrument is operated by means of digital display which is plugged to mass comparator’s controller. Lengthwise shift of the loading robot with weights is carried out automatically using solenoid actuators. Additional software functions enable loading and taking off the weights, data processing and storing, and data export to instrument’s memory.

The AK-6 5Y.F weighing system is a first-class solution for professional filter mass measurement. Dy (more)namic control and correction of mass indications both ensure fast and stable weighing regardless of the weighed filter type. Effective Weighing Analysis Automation of the weighing cycle, thanks to the elimination of the 'human factor', is a guarantee of measurement repeatability and accuracy impossible to be obtained in case of manual weighing. This is especially crucial when assessing emission of particulate pollutants, emitted by combustion engines (Euro 6 Standard). Additionally, it allows to carry out tests and research while maintaining measurement repeatability of sd < 0.2 µg. Filter Container Filter insert of special design allows to store filters in perfect conditions, it guarantees filter security in the course of transport. Each filter is stored and conditioned in a closed container protecting the filter against absorption of potential contamination from the air. The device features a 6-position magazine. Measurement of Ambient Conditions Inside the Chamber The automatic weighing system, AK-6 5Y.F, is equipped with a high-class thermo-hygro-barometer allowing to test ambient conditions in real time with the accuracy of: ± 1 hPa (pressure) / ± 1.8% (humidity) / ± 0.1 °C (temperature). Metrological Control Correctness of weighing system operation may be periodically verified via a certified mass standard of weight similar to the weight of tested filters. The weighing system of AK-6 is certified by NMI and approved by an accredited Measuring Laboratory (calibration certificate). Control aiming to specify whether the system operates correctly or not may be performed with an external adjustment mass, i.e. certified external mass standard, or a reference filter. Dedicated Software Ergonomic software supported by an independent RMCS application allows to manage time and comparison test plans of each filter or filter series. Summary reports and report components are defined by the system administrator.

The AK-5/100 STENT automatic balance for stents operates with the readability of d = 0.1 μg. The  (more)device features a special working mode which makes it possible to analyse the change in sample mass during the technological process. Automatic Operation Automation of the weighing cycle, thanks to the elimination of an error being a result of the human factor, is a guarantee of measurement repeatability and accuracy impossible to be obtained in the case of manual weighing. Stent Container Automatic balance for stents, the AK-5/100 STENT, enables users to create identical test conditions for the entire stent series. With use of the stent container, the user can weight a series of 5 stents maximum, one by one, thus the necessity to place one stent on the pan each time is avoided. Accessories for Stent Weighing Weighing pan of custom design allows convenient weighing of 40 mm stents with a diameter of even 20 mm. A special applicator facilitates stent loading. Spacious Chamber and Ease of Operation In the weighing chamber there are perfect conditions necessary to enable highly precise weighing. The spacious chamber makes loading of the weighing pan with stents comfortable and uncomplicated. Measurement of Ambient Conditions in the Weighing Chamber The automatic balance for stent weighing, AK-5/100 STENT, is equipped with a high-class thermo-hygro-barometer allowing to test ambient conditions in real time with the accuracy of: ± 1 hPa (pressure) / ± 1.8% (humidity) / ± 0.1 °C (temperature).

Application: Automatic mass comparator AK-4/5000 series is intended to automatic determination of we (more)ights mass deviations with operator’s activity limited to the minimum. The comparator enables determining deviations of three tested weights in a single cycle. AK-4/5000 is designed to compare weights from 1 kg to 5 kg. The instrument is commonly applicable in mass measuring laboratories, and particularly in certification units for weights classes E and F. Design and functionality: The supervising part of the mass comparator is a digital module which cooperates with a controller of instrument’s mechanical components. The digital module and the automatic loader are located in mass comparator’s weighing chamber. The instrument is operated by means of digital display which is plugged to mass comparator’s controller. The supervising elements are not integrated with mass comparator’s mechanical parts, thus enabling separation of instrument’s weighing chamber from ambient conditions influence.

Application: Automatic mass comparator AK-4/2000 series is intended to automatic determination of we (more)ights mass deviations with operator’s activity limited to the minimum. The comparator enables determining deviations of three tested weights in a single cycle. AK-4/2000 is designed to compare weights from 200 g to 2 kg. The instrument is commonly applicable in mass measuring laboratories, and particularly in certification units for weights classes E and F. Design and functionality: The supervising part of the mass comparator is a digital module which cooperates with a controller of instrument’s mechanical components. The digital module and the automatic loader are located in mass comparator’s weighing chamber. The instrument is operated by means of digital display which is plugged to mass comparator’s controller. The supervising elements are not integrated with mass comparator’s mechanical parts, thus enabling separation of instrument’s weighing chamber from ambient conditions influence.

Application: Automatic mass comparator AK-4/1001 series is intended to automatic determination of we (more)ights mass deviations with operator’s activity limited to the minimum. The comparator enables determining deviations of three tested weights in a single cycle. AK-4 is designed to compare weights from 100 g to 1 kg. The instrument is commonly applicable in mass measuring laboratories, and particularly in certification units for weights classes E and F. Design and functionality: The supervising part of the mass comparator is a digital module which cooperates with a controller of instrument’s mechanical components. The digital module and the automatic loader are located in mass comparator’s weighing chamber. The instrument is operated by means of digital display which is plugged to mass comparator’s controller. The supervising elements are not integrated with mass comparator’s mechanical parts, thus enabling separation of instrument’s weighing chamber from ambient conditions influence.

Application: Automatic mass comparator AK-4/10000 series is intended to automatic determination of w (more)eights mass deviations with operator’s activity limited to the minimum. The comparator enables determining deviations of three tested weights in a single cycle. AK-4/10000 is designed to compare weights from 1 kg to 10 kg. The instrument is commonly applicable in mass measuring laboratories, and particularly in certification units for weights classes E and F. Design and functionality: The supervising part of the mass comparator is a digital module which cooperates with a controller of instrument’s mechanical components. The digital module and the automatic loader are located in mass comparator’s weighing chamber. The instrument is operated by means of digital display which is plugged to mass comparator’s controller. The supervising elements are not integrated with mass comparator’s mechanical parts, thus enabling separation of instrument’s weighing chamber from ambient conditions influence.

Application: Automatic mass comparator AK-4/1000 series is intended to automatic determination of we (more)ights mass deviations with operator’s activity limited to the minimum. The comparator enables determining deviations of three tested weights in a single cycle. AK-4/1000 is designed to compare weights from 100 g to 1 kg. The instrument is commonly applicable in mass measuring laboratories, and particularly in certification units for weights classes E and F. Design and functionality: The supervising part of the mass comparator is a digital module which cooperates with a controller of instrument’s mechanical components. The digital module and the automatic loader are located in mass comparator’s weighing chamber. The instrument is operated by means of digital display which is plugged to mass comparator’s controller. The supervising elements are not integrated with mass comparator’s mechanical parts, thus enabling separation of instrument’s weighing chamber from ambient conditions influence.

Application: Automatic mass comparator AK-4/100 series is intended to automatic determination of wei (more)ghts mass deviations with operator’s activity limited to the minimum. The comparator enables determining deviations of three tested weights in a single cycle. AK-4/100 is designed to compare weights from 10 g to 100 g. The instrument is commonly applicable in mass measuring laboratories, and particularly in certification units for weights classes E and F. Design and functionality: The supervising part of the mass comparator is a digital module which cooperates with a controller of instrument’s mechanical components. The digital module and the automatic loader are located in mass comparator’s weighing chamber. The instrument is operated by means of digital display which is plugged to mass comparator’s controller. The supervising elements are not integrated with mass comparator’s mechanical parts, thus enabling separation of instrument’s weighing chamber from ambient conditions influence.

Application: Automatic mass comparator AK-4/100 series is intended to automatic determination of wei (more)ghts mass deviations with operator’s activity limited to the minimum. The comparator enables determining deviations of three tested weights in a single cycle. AK-4/100 is designed to compare weights from 10 g to 100 g. The instrument is commonly applicable in mass measuring laboratories, and particularly in certification units for weights classes E and F. Design and functionality: The supervising part of the mass comparator is a digital module which cooperates with a controller of instrument’s mechanical components. The digital module and the automatic loader are located in mass comparator’s weighing chamber. The instrument is operated by means of digital display which is plugged to mass comparator’s controller. The supervising elements are not integrated with mass comparator’s mechanical parts, thus enabling separation of instrument’s weighing chamber from ambient conditions influence.

The AGV-2/20 automatic comparator determines density and volume of mass standards of class E1 and lo (more)wer in accordance with OIML R111. It is characterized by the highest accuracy and measurement stability ranging between 1 kg to 20 kg. The comparator features specially designed feeder to load and unload the magazine with mass standards. The device is equipped with an additional circulator eliminating air bubbles and a top-class liquid temperature sensor of 0.001 ˚C accuracy. A weighing pan suspended on wires eliminates the eccentricity and minimizes the influence of liquid surface tension. Dedicated software enables to determine mass standards density and calculate uncertainty using A method according to OIML R111. It also allows to determine (verify) liquid density.

The AGV-8/1000 automatic comparator determines density and volume of mass standards of class E1 and  (more)lower in accordance with OIML R111. It is characterized by the highest accuracy and measurement stability ranging between 1g and 1kg. The AGV-8/1000 automatic comparator enables density determination to be carried out simultaneously for 7 mass standards using one reference weight. The comparator features specially designed feeder to load and unload the magazine with mass standards. The device is equipped with an additional circulator eliminating air bubbles and a top-class liquid temperature sensor of 0.001 ˚C accuracy. A weighing pan suspended on wires eliminates the eccentricity and minimizes the influence of liquid surface tension. Dedicated software enables to determine mass standards density and calculate uncertainty using A method according to OIML R111. It also allows to determine (verify) liquid density.

A mounting bracket for the PUE C315 indicator connected to the scale via cable. It enables fitting t (more)he indicator to a table or mounting it on a wall. The mounting bracket is manufactured in mild steel powder coated technology.

A stand for supporting scale's indicator installed on a cable 5Y / PUE CY10. Mild steel version (more) available.

A stand, based on a tripod for supporting scale's indicator installed on a cable PUE HY10 / PUE  (more)HX7 / HX5.EX. Stainless steel version available. Stand for measuring indicator PUE HX5.EX can only be purchased together with the HX5.EX indicator/ scale.

A stand, based on a tripod for supporting scale's terminal installed on a cable PUE H315. Stainl (more)ess steel version available.

A stand, based on a tripod for supporting scale's indicator installed on a cable PUE C32 / PUE 7 (more).1. Mild steel version available.

A stand, based on a tripod for supporting scale's indicator installed on a cable PUE C315. Mild  (more)steel version available.