Laboratory pumps

This Bio-Rad HydroTech Vacuum Pump was removed from a university lab where it was surplus to require (more)ments. The unit powers up and air flows in and out. It is in reasonably good cosmetic condition with minor marks from use.

World Precision Instruments AL-1000 Syringe Pump This item was removed from a university laboratory  (more)where it was surplus to requirements. It powers on and is in good cosmetic condition. The unit has been tested with an in-house Power Supply 2 (12V Center Positive) Not included.

World Precision Instruments AL-1000 Syringe Pump This item was removed from a university laboratory  (more)where it was surplus to requirements. It powers on and is in good cosmetic condition. The unit has been tested with an in-house Power Supply 2 (12V Center Positive) Not included.

Gast Vacuum Pump Model 0523-V125Q-G588DX This was removed from a university lab where it was surplus (more) to requirements. The unit has not been tested as it has not been wired up. It is in good cosmetic condition with minor marks.

Gynkotek 480 Low Pressure Binary Gradient Pump HPLC This item was removed from a university laborato (more)ry where it was surplus to requirements. The pump is in good cosmetic condition, with a few small stain marks on the top cover. It powered on successfully, displaying pump data and system parameters, including pressures and flow rates. Theunit allows selection and resetting of eight programs. Further testing could not be conducted at our facility. Specifications: - Model (Data Plate): M 480 - Model (Startup Screen): M480G - Serial No.: 9640053 - Part No.: 5020.0010

Agilent HS 602 Rotary Vane Vacuum Pump This item was removed from a university laboratory where it w (more)as surplus to requirements. The vacuum pump powers on, with the status light changing from red to green as the pump speed increases. It operates smoothly, with no unexpected noises or vibrations. Includes: - Oil Exhaust Filter NW25 Model: 749-9365R002Serial No.: IT1328A241

This lot of Gilson HPLC Units were removed from a university lab where they were surplus to requirem (more)ents. Included are; 1 x Gilson 118 UV/VIS DetectorPowers on 1 x Gilson 305 PumpPowers on 1 x Gilson 305 PumpPowers on but the screen is faulty. 1 x Gilson 805 Manometric ModuleConnects to 305 Pump 1 x Gilson 811B Dynamic MixerPowers on All units are in reasonably good used cosmetic condition with marks and stains.

JAVAC DS40 Single Stage High Vacuum Pump This item was removed from a university laboratory where it (more) was surplus to requirements. The vacuum pump powers on and runs. It is in fair cosmetic condition with signs of regular use. Specifications. - Model: DS40 - Motor Type: 63 2M 33 - Serial No.: 961053

Haskel Pump Air Driven Liquid Pump Model: MCP 110HYD. PRESS 10,000 PSI Max This item was removed fr (more)om a university where it was surplus to requirement. It is in good cosmetic condition This item is untested due to not having the correct equipment to test at our facility.

This Edwards ECB8 Rotary Vane Vacuum Pump was removed from a university lab where it was surplus to  (more)requirements. The unit powers up and has been fully tested by a service engineer. It is in full working order and did not require a service. It is in good cosmetic condition with minor marks.

KD Scientific Legato 180 Dual Picoliter Syringe Pump This item was removed from a university laborat (more)ory where it was surplus to requirements. It powers on and is in good cosmetic condition. PSU included.

Dolomite Mitos P-Pump System With Remote Chamber 400 + Flow Rate Sensor This was removed from a univ (more)ersity lab where it was surplus plus to requirements. All units power up but have not been tested further. It is in reasonably good cosmetic condition with minor marks from use. Includes: -Dolomite Mitos P-Pump-Dolomite Mitos Remote Chamber 400-Dolomite Mitos Sensor Interface-Dolomite Mitos Flow Rate Sensor-P-Pump user manual P-Pump model number- 3200016_4P-Pump serial number- 1600682 Chamber serial number- 1600843 Sensor serial number- 160880

Tecan Hydrospeed Microplate Washer w/ Metzger Vacuum Pump Lab This item was removed from a universit (more)y laboratory where it was surplus to requirements. It powers on but has not been tested further. It is in fair cosmetic condition. The previous client has stated it was in working order prior to being removed from the lab. Includes: - Metzger Vacuum Pump

This Copely Scientific HCP5 High Capacity Pump was removed from a university lab where it was surplu (more)s to requirements. The unit powers up and runs well. It is in good cosmetic condition with marks from use but is missing a foot. Accessories:1x DFM 2000 FlowmeterModel 4043 EThe unit powers on and is in good cosmetic condition.No further testing done 1x bag of 10mm PVC tubingCat No 5015 1x box of 6 Collection plates (28.3 ltr set)Cat No 8314 1x bag of 13 silicone rubber O rings for ACICat No. 8307 1x 5.6ml tubing 1 x Serial cable 1x Waste Shot Collector WSC2Cat No 18208The unit is in good cosmetic conditionNo further testing done 1x Base PlateCat No 19831 2x User Manuals:High Capacity Pump listFlow Meter List 1x Metal plate 1x plastic stand

VARIAN TV301 NAVIGATOR Turbomolecular Pump & 301 NAV C.U Lab This item was removed from a univer (more)sity where it was surplus to requirement. It is in good cosmetic condition, we are unable to test it further at our facility. Varian TV301 Navigator.Model No: 9698918S006.Serial No: 229645.Manufactured: 2007. Varian Turbo-V 301 NAV C.U.Model No: 9698972M001.Serial No: 256196.Manufactured: 2007.

CTI Cryogenics Cryo Torr 8 High Vacuum Pump w/ 8001 Controller & SCW Compressor This was removed (more) from a university lab where it was surplus to requirements. The Cryo pump is in excellent cosmetic condition but the rest of the system is in good to reasonable condition. It was in full working order when last used. The normal terms and conditions do not apply to this item. This item is non returnable and non refundable.

Waters Micromass Quattro Micro GC System with Software and Edwards Pumps This item was removed from  (more)a university laboratory where it was surplus to requirements. It has not been operated for approximately four years, having been transferred from another department where it was unused following a replacement. The system powers on and has been tested with a digital thermometer (not included), but no further testing has been conducted at our facility. All components are in very good cosmetic condition. The System Comprises: - Waters 6890N GC Unit, Serial No.: CN10639134 - Micromass Libra Detector, Serial No.: 009 - Agilent 7683B Series Autosampler, Serial No.: CN44831407 - Agilent 7683B Series Injector, Serial No.: CN50523310 - Micromass MA4184 Power Supply Unit (PSU), Serial No.: 0/003 - Edwards RV3 Vacuum Pump, Serial No.: 086071307 - Edwards RV5 Vacuum Pump, Serial No.: 02/572004 - 2 x Edwards Foreline Traps, Serial Nos.: 035003224, 035003231 Software Included on CD-ROM: - MassLynx 4.1 - MassLynx 4.0 SP4 - MassLynx SCN 538 Accessories: - Agilent 6890N Series GC User Information CD-ROM - Waters Quattro Micro GC Operator's Manual - Maintaining Your Agilent GC System Manual - 6 x Communication Cables - 5 x Power Leads - 6 meters of 90/128 vacuum hose

This listing is for a Watson Marlow 313S Peristaltic Pump.The unit is in full working condition and  (more)is ready for immediate release.The Watson Marlow Peristaltic Pump Model 313S is a versatile and reliable solution for fluid transfer in various laboratory and industrial applications. Here are the key features and specifications:Key Features:Speed Ranges: The pump offers two selectable speed ranges:50 rpm400 rpmSpeed Control Ratio: Provides a 20:1 speed control ratio for precise adjustments, allowing for a wide range of flow rates.Operating Voltages and Frequencies: Compatible with a global power supply range of 110-240V and operates at 50/60Hz, making it suitable for use in different regions without the need for a voltage converter.Compact Dimensions: The pump has a compact size, measuring 285 x 167 x 120 mm (LxWxH), which helps save valuable bench space.Weight: Weighing 5.35 kg (12 lbs), it is lightweight enough for easy handling and placement in various settings.Power Rating: The pump operates at a power rating of 100 VA, ensuring efficient performance while maintaining low energy consumption.Applications:The Watson Marlow 313S peristaltic pump is suitable for various applications, including:Chemical and Pharmaceutical Processing: Ideal for transferring viscous and sensitive fluids without contamination.Laboratory Research: Commonly used in laboratories for applications requiring precise and controlled fluid transfer.Food and Beverage Industry: Useful for pumping food products or ingredients where hygiene and safety are critical.Water Treatment: Employed in processes requiring accurate dosing of chemicals and additives.

This listing is for a Charles Austen Pump Dymax 14 Diaphram Specifications Maximum Flow, l/min - 14  (more)Maximum Pressure - 2.0 bar / 29.0 psi Maximum Vacuum, mbar - 240 Voltage Options - 230V AC (50hz) 110V AC (50/60hz), 230V AC (50hz) Dims, L x W x H, mm - 210 x 125 x 151

This listing is for 1 of 2 Watson Marlow 505S Peristaltic Pump. The unit is in full working conditi (more)on and is ready for immediate release. Experience precision and reliability with the Watson Marlow 505S Peristaltic Pump, expertly designed for the safe transport of liquids while maintaining a contamination-free environment. Ideal for delivering culture media, buffers, and various solutions, this versatile pump is a valuable addition to any laboratory. Key Features: Variable Rotor Speed: With a rotor speed range of 2-220 rpm, the 505S allows for customizable flow rates to suit your specific application needs. Compact Design: Measuring just 25 x 30 x 12 cm, this pump's compact size makes it perfect for laboratory settings where space is at a premium. Flexible Electric Supply: Compatible with both 100-120V and 220-240V power sources at 50/60Hz, ensuring versatility in different laboratory environments. Technical Specifications: Manufacturer: Watson Marlow Benefits: Contamination-Free Operation: The peristaltic design ensures the liquid only comes into contact with the tubing, protecting both your samples and the pump from contamination. Versatile Applications: Whether you're working with culture media, buffers, or other solutions, the 505S is designed to handle a wide range of laboratory tasks efficiently. Accessory Options: Enhance your pump's capabilities with various pump head options, such as the 508MC2 Eight Roller Two Channel Micro Pump head and the Easy Load Drive Head, allowing for even greater adaptability. Choose the Watson Marlow 505S Peristaltic Pump for a dependable, high-performance solution that meets the demands of your laboratory. Achieve consistent results and streamline your liquid handling processes with this exceptional peristaltic pump.

This listing is for 1 of 2 QuattroFlow QF15ACUEGN-UK Single-use Pump Diaphragm Pump. The unit is in (more) full working condition and is ready for immediate release. The QuattroFlow QF150 Diaphragm Pump is an efficient, 4-piston pump designed for handling water-like fluids in various sectors, including pharmaceuticals, biotech, food, and cosmetics. Here’s a detailed overview of its features, specifications, and applications: Key Features: Flow Rates: Max Flow Rate: 3° Eccentric Shaft: Up to 100 l/h (1.67 l/min) 5° Eccentric Shaft: Up to 180 l/h (3 l/min) Min Flow Rate: Both shaft angles start at 1 l/h (0.017 l/min). Pressure Ratings: Maximum operating pressure of 6 bar (87 psi) for fluids < 40°C; 4 bar (58 psi) for fluids > 40°C. Temperature Ratings: Maximum fluid temperature: 80°C (176°F). CIP (Clean-in-Place) and SIP (Sterilize-in-Place) capable up to 90°C (194°F) and 130°C (260°F), respectively. Suction Lift: 3° Shaft: 1-1.5 m (3.2-4.9 ft) 5° Shaft: 2-3 m (6.6-9.8 ft) Volume Specifications: Approximate volume per revolution: 3°: 0.72 ml 5°: 1.2 ml Total filling volume (without connectors): 15 ml. Material Construction: Wetted Materials: SS316L (pump housing, valve plate), Santoprene (diaphragms), EPDM (valves, O-rings). Non-Wetted Materials: SS316L for bearing housing and base plate. Dimensions and Weight: Length: 257 mm (10.2 in); Width: 164 mm (6.5 in); Height: 185 mm (7.2 in); Weight: 9.8 kg (22 lb). Slight variations in dimensions and weight depending on models. Advantages: Versatility: The QF150 can handle a wide range of fluids, including: Biological Solutions: Proteins (e.g., IgG, monoclonal antibodies), enzymes, and vaccines. Suspensions and Polymers: Silicon, latex, and chromatography media. Cell Suspensions: Bacteria, yeast, algae, and mammalian cells. Food Products: Dairy products and gelatine. Low-Shear Design: Ensures gentle handling of sensitive materials, maintaining their stability and functionality. CIP/SIP Capable: Facilitates easy cleaning and sterilization, crucial for maintaining hygiene in production environments. Compact and Lightweight: Easy to integrate into laboratory or production settings without occupying much space.

This listing is for a QuattroFlow QF 1200-SU Single-use Pump diaphragm pump. The unit is in full wo (more)rking condition and is ready for immediate release. The Quattroflow QF 1200-su is an advanced single-use quaternary diaphragm pump tailored for sterile fluid transfer in the pharmaceutical and biotech industries. Here’s a detailed look at its key features, applications, and benefits: Key Features: Maximum Flow Rate: Capable of reaching up to 1200 litres per hour (320 gallons per hour), making it suitable for high-demand applications. Single-Use Pump Chamber: Constructed from solid polypropylene, the pump chamber is designed for easy replacement, which eliminates the need for cleaning and validation. Eccentric Shaft Options: Available with 3° and 5° angles, allowing for adjustable flow rates to suit specific processing needs. Self-Priming Capability: The pump can run dry and self-prime, which is advantageous for quick starts and minimizes downtime. Low-Shear, Low-Slip, Low-Pulsation Design: These features ensure the gentle transfer of delicate biological fluids, crucial for maintaining cell viability and integrity. Seal-Less Design: Eliminates mechanical shafts and seals, reducing particle generation and enhancing total product containment. CIP and SIP Capable: Compatible with clean-in-place (CIP) and sterilize-in-place (SIP) protocols, ensuring compliance with stringent hygiene standards. Compact Design: The integrated design incorporates the pump chamber, drive, motor, and control box into a single unit, making it ideal for laboratories with limited space. Applications: The Quattroflow QF 1200-su is versatile and can be utilized in various applications, including: Tangential Flow Filtration (TFF): For concentrating and diafiltering biological solutions. Chromatography: Facilitating the purification of biomolecules. Centrifuge-Feed Applications: Ensuring consistent feed flow to centrifuges. Virus Filtration: Critical for ensuring safety in biopharmaceutical products. Inline Dilution: Efficiently diluting solutions during processing. Filling Machines: For precisely transferring fluids into containers. Filter Cartridges or Plate and Frame Depth Filters: Enhancing filtration processes. Benefits: The Quattroflow QF 1200-su offers numerous advantages: Reduced Maintenance Costs: The single-use design minimizes the need for maintenance and cleaning. Improved Purification Yields: Enhances the efficiency of filtration systems, leading to better product quality. Optimized Speed to Market: Streamlined operations allow for faster product development and delivery. Gentle Fluid Transfer: Protects sensitive biological materials, maintaining their viability. Compliance with cGMP and FDA Regulations: Ensures adherence to industry standards, enhancing product safety and efficacy. Overall, the Quattroflow QF 1200-su is an excellent choice for professionals looking to improve the efficiency and reliability of sterile fluid transfers in biopharmaceutical manufacturing and biotech processes. Its innovative design and features make it a valuable asset in any lab setting.

This listing is for a Charles Austen Pumps Dymax 30 Vacuum Pump. The unit is in full working condit (more)ion and is ready for immediate release. The Dymax series includes diaphragm pumps that are engineered to deliver a clean, oil-free vacuum or pressure source, making them ideal for a range of applications from laboratories to industrial settings. Key Specifications: Dimensions: Approximately 210 x 151 x 125 mm (width x depth x height), allowing for compact installation. Max Flow Rate: Capable of achieving a maximum flow rate of up to 14 L/min, ensuring efficient performance for various tasks. Ultimate Vacuum: Can reach an ultimate vacuum of up to 240 mbar, suitable for applications requiring low pressure. Weight: Each unit weighs around 1.6 kg, making it lightweight and portable. Features: Continuous Operation: Designed for long-term use without overheating, making them reliable for demanding applications. Whisper Quiet: Operates at low noise levels, ideal for environments where sound levels need to be minimized. Rugged Reliability: Built to withstand tough conditions, ensuring long-lasting performance. Flexibility and Customization: Can be tailored to meet specific requirements, enhancing versatility across different applications. Safety Compliance: Adheres to IEC 1010 standards, ensuring safety in operation. Applications: The Dymax series pumps are suitable for a variety of uses, including: Laboratory Use: Ideal for tasks requiring accurate and clean vacuum or pressure sources. Industrial Applications: Versatile enough for various processes in manufacturing settings. OEM Uses: Customizable options make them suitable for original equipment manufacturers needing specific functionalities.

This listing is for a Scilog Tandem 1081 Peristaltic Pump. The unit is in full working condition an (more)d is ready for intimidate realese.

This listing is for a Fristam FPE742/185A Centrifugal Pump.The unit is in full working condition and (more) is ready for immediate release.This Unit was installed new in 2015 by Freestead Process Technology.Product Overview:The Fristam FPE742 5.5KW Centrifugal Pump is a robust and versatile sanitary pump engineered for hygienic applications in industries such as food and beverage, pharmaceuticals, and biotechnology. With advanced design features and high-quality materials, this pump provides efficient, reliable, and gentle product handling, even at high volumetric flows. Its superior construction and innovative engineering make it a durable and reliable choice for critical processes.Key FeaturesHygienic Design:Close internal clearances as tight as 0.5 mm enhance efficiency while ensuring sanitary operation.Designed for gentle handling of sensitive products, preserving their quality and integrity.Advanced Engineering:Optimized Impeller Design: Maximizes efficiency while ensuring low NPSH requirements, reducing cavitation risks for smooth and quiet operation.Handles high volumetric flows while maintaining gentle product handling.Robust Construction:Made from 316L stainless steel castings and forgings, providing exceptional mass, strength, and durability.Resistant to hydraulic shock and cavitation, which can damage other pumps in demanding applications.Ease of Maintenance and Installation:Features a self-aligning shaft for quick and easy installation and gapping.A concentric collar on the shaft prevents run-out, protecting the seal from wear and damage, extending the pump’s lifespan.Applications:Food & Beverage: Dairy, juices, and hygienic liquid handling processes.Pharmaceuticals: Transferring high-purity and sensitive products.Biotechnology: Supporting shear-sensitive biological processes.

This listing is for a Pall Allegro 1/2" Single Use TFF System.The unit is in full working condition  (more)and is ready for immediate release.This Unit is fitted with a Ismatec Flowmaster FMT 300 peristaltic pump.This unit is supplied with Trolley and containers.The Pall Allegro 1/2" Single Use TFF System is a cutting-edge solution designed specifically for tangential flow filtration (TFF) in bioprocessing applications, combining innovative single-use technology with user-friendly design. Unlike traditional TFF systems, the Allegro system incorporates new concepts that enhance ease of use and efficiency, featuring a carefully considered layout that allows full access to components from one side.Key Features:Single-Use Design: Eliminates cross-contamination and cleaning requirements, enhancing system flexibility and ensuring a sterile environment.Integrated Sensors: Equipped with single-use sensors that track key process parameters, provide notifications for out-of-spec conditions, and enable automated control for optimal processing.Easy Setup: Comes with five pre-irradiated manifold sets (feed, retentate, permeate, bio container, recovery) that are ready for installation, typically taking just 20 minutes.Automated Operation: Fully automated for monitoring and controlling critical parameters, ensuring consistent performance throughout ultrafiltration and diafiltration processes.Technical Specifications:Capacity: Features a recirculation pump with a capacity of 1,000 L/hour, designed to accommodate 0.5 - 2.5 m² cassettes running at a crossflow of 5 L/min/m².Versatile Connections: Easily connects to Allegro 2D and 3D bio containers for WFI, diafiltration buffer, and process fluid in fed batch operations.Temperature Control: Includes a heat exchange plate under the retentate bio container to manage product temperature, either cooling or heating as needed.Applications:Ideal for concentration and diafiltration of proteins, recombinant molecules, potent biological drugs, cytotoxic drugs, and vaccines, the Pall Allegro system stands out as a reliable and efficient choice for modern bioprocessing needs.Brochure- http://g-eitan.com/pdf/Biotechnology/Ultrafiltration%20-%20TFF/Single%20use%20cross%20flow%20system/SingleUseTFF.pdf

This listing is for 1 of 2 Cole Palmer MasterFlex L/S 7554-95 Peristaltic Pump with a Masterflex Eas (more)y-Load 3 pump head . The unit is in full working condition and is ready for immediate release. The Cole-Parmer MasterFlex L/S 7554-95 Peristaltic Pump is a versatile and reliable solution for accurate fluid transfer in laboratory, pharmaceutical, and industrial environments. Designed to handle a wide range of flow rates and fluid viscosities, this peristaltic pump offers precision, ease of use, and durability. Key Features: Flow Rate: Delivers flow rates from 0.6 to 3400 mL/min, adjustable based on the tubing size used. Variable Speed Control: The pump operates at speeds between 6 and 600 RPM, allowing precise control of flow. Reversible Pumping: Enables bi-directional flow for easy priming, purging, and efficient fluid transfer. Digital Display: Provides a clear, easy-to-read display showing speed, direction, and operational status for precise monitoring. Easy Maintenance: Tool-free tubing changes and a low-maintenance design for efficient operation. Compatibility: Works with a variety of MasterFlex L/S tubing, ensuring adaptability for different fluid handling needs. Durable Construction: Engineered for reliable, long-term use, with corrosion-resistant materials to withstand demanding applications. Specifications: Flow Rate Range: 0.6 to 3400 mL/min Speed Range: 6 to 600 RPM Power Requirements: 90-260 VAC, 50/60 Hz Operating Temperature: 0 to 40°C (32 to 104°F) Dimensions: 8.6" H x 9.4" W x 11.1" D (21.8 cm x 23.9 cm x 28.2 cm) Weight: 15 lbs (6.8 kg) The Masterflex Easy-Load 3 pump head is designed for user-friendly operation and fast tubing changes. Key features include: Automatic Retention Mechanism: The spring-loaded occlusion lever opens the occlusion bed and retracts the tubing retainers, allowing tubing to be easily loaded and unloaded. Tubing Range: Suitable for use with Masterflex L/S Precision tubing, with a flow range of 0.001 to 2900 mL/min depending on tubing size. Stackability: Up to 4 Easy-Load 3 pump heads can be stacked on one compatible pump drive, making it an efficient solution for multi-channel applications. Easy Integration: Same-side tubing entry/exit permits easy integration into space-limited applications, with the option to mount and operate the pump head in any of four positions (depending on the drive).

This listing is for 1 of 4 Watson Marlow SCIQ 323 Peristaltic Pump. The unit is in full working con (more)dition and is ready for immediate release. The Sci-Q 323 range is designed exclusively for scientific pumping needs, and brings a stunning level of performance and quality to the bench top.   323S high-performance manual control variable speed pump • High-performance microprocessor controlled pumps • 323S can be extended with 313X extension pump heads to five channels • Flow rates to 2000ml/min and 133:1 speed control ratio   323S speed adjusts in 1rpm steps from 3 to 400rpm. keypad lock prevents tampering or accidental changes, auto restart for mains failure recovery, switchable between 100-120V or 220-240V, MemoDose facility for accurate single shot dosing.   323S drives may also be fitted with 314 four roller pump heads if lower pulsing is required, or with 313D2 or 314D2 pump heads which accept 2.4mm wall thickness tubing for higher pressure operation or pumping more viscous fluids.   For low-flow pumping, up to ten channels, 323S drives may be fitted with 314MC (four-roller) micro-cassette pump heads, which can be extended to ten channels by adding one 314MCX or 318MCX extension pump head. This pump is fitted with one 314MC head and will be supplied with an additional spare 314MC as per images   Serial# H041702   Dims 27cm (D) x 22cm (W) x 12cm (H)