VACUUBRAND ME 2 NT Diaphragm Pump

Laboport SD N 860.3 FT.40.18 is a two-stage pump with an integrated “self-drying” system for automat (more)ic condensate drain. The “SD” series is widely used in laboratories, especially when the vapors are humid and a clean and ecological vacuum is required. Typical applications are: vacuum ovens (for drying chemicals, drying biological samples, heat treatments), autoclaves for sterilizing instruments, containers, filters and textiles. Thanks to the use of anti-corrosion materials, it is possible to vacuum even corrosive products. The heart of the pump is the diaphragm with differentiated structure in PTFE, optimized to guarantee high performance with reduced dimensions and at the same time, long life even in heavy applications. When the humid gases are sucked in, it can happen that condensation forms in the pump head: consequently the performance decreases, considerably increasing the emptying time. To eliminate condensation, the 'drying system' then opens a solenoid valve that allows ambient air to enter the heads. Once the condensation has been eliminated, the solenoid valve closes and the pump sucks from the stove in full capacity. Over time, condensation could form again and then the cycle is repeated. The time interval between one cycle and the next can be adjusted as desired, as well as the duration of the air injection. Technical features Flow rate (max.) 60 l / min Final vacuum (max.) 4 mbar (abs.) Pressure (max.) 1 bar (rel.) Fluid temperature allowed at 5-40°C FFPM valve material PTFE coated diaphragm material Pump head material PTFE Applications Rotary evaporation Centrifugal concentration Distillation Vacuum oven Qualitative characteristics Clean operation, 100% oil-free Corrosion resistant PTFE / FFPM flow path Ideal for extremely aggressive / corrosive gases and vapors Compact, silent and reliable The self-drying system removes condensation without altering the vacuum level Maintenance free Download the data sheet for further information and accessories. NOT SURE WHICH VACUUM PUMP YOU NEED? Try following our guide to KNF pumps: VACUUM PUMPS FOR THE LABORATORY Or download the KNF guide: THE IDEAL DIAPHRAGM PUMP FOR EVERY APPLICATION

This Hewlett Packard Cohesive Technologies 1100 Series G1310A Isocratic Pump was removed from a univ (more)ersity lab where it was surplus to requirements. The item is in good cosmetic condition and powered up, as seen the item is missing the front door panel. We are unable to test this item further at our facility. Power supply included.

This Edwards Speedivac 2 Vacuum Pump was removed from a university lab where it was surplus to requi (more)rements. The pump has been professionally serviced and is in good working order. It performs to 2 x 10-1 The item is in good cosmetic condition but has marks and stains from use.

Gilson MINIPULS 3 Peristaltic Pump Head, R1 Single Channel The Gilson MINIPULS 3 Peristaltic Pump He (more)ad, R1 Single Channel is a versatile pump head with a maximum flow rate of 40 ml/min and a minimum flow rate of 0.3 ul/min. Its durable construction and compatibility with the Gilson MINIPULS 3 Peristaltic Pump makes it ideal for precise fluid handling in various research and pharmaceutical applications. INCLUDED: The Gilson MINIPULS 3 Peristaltic Pump Head, R1 Single Channel includes: - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Heidolph Overhead Stirrer Visco Jet Impeller inoJET-120mmParticularly in the case of applications wi (more)th very viscousmedia such as pastes and gels, a very reliable stirring process in the entirevessel without air entry is important. This is what the innovative stirringsystem VISCO JET® offers!The particular shape of the blades triggers an intrinsicallydynamic flow, which shortens the process times with significantly better mixingresults compared to conventional impellers. An all-rounder for aqueous andhighly viscous substances. The VISCO JET® 120 is ideal for vessels with thefollowing characteristics: - ideal vessel diameter: 200- 300 mm - ideal ground clearance: 36 mm - ideal filling level: 200- 300 mm - ideal volume: 6,300 - 21,200 ml The VISCO JET® 120 is made of stainless steel. A stirrer shaft with a diameter of 10 mm is included in the scope of delivery. INCLUDED: The Heidolph Overhead Stirrer Visco Jet Impeller inoJET-120mm includes: - Operator's Guide - Full 3 Year Manufacturer's Warranty

Scilogex DM0412 LCD Digital Clinical Centrifuge The DM0412 Clinical Centrifuge is ideal for the sepa (more)ration of serum, plasma, urea, blood samples, PRF and routine applications in hospital and research laboratories. The DM0412 conforms to international safety standards and regulations. SCILOGEX clinical centrifuges are certified with CE, cTUVus and FCC. MCA test according to IEC/EN61010-2-20 including explosion-proof and bio-safe tests. Passed EN61010-2-101:2002 requirements for invitro diagnostic (IVD) medical equipment. DM0412 Clinical Centrifuge Features: - High accuracy of speed, excellent performance - CPU controls all operating parameters including speed and time - RPM or G-force can be set and displayed - Operation can be timed from 30 seconds to 99 minutes or continuous running - Timer commences once the set speed is reached, so the separation time is more accurate - Gentle braking at low speeds with efficient separation - Parameters can be modified after the set speed is reached - Quick spins are possible by pressing and holding PULSE key - Interlock automatic door lock - Easy-to-read backlit LCD processing display and sound alert - High strength plastic rotor and excellent balance technology for quiet and stable operation - Brushless DC motor drive quickly and effortlessly accelerates the rotor to set speed - Comes with adapters and plugs for all tubes listed below - cTUVus approved for UL and CSA INCLUDED: The Scilogex DM0412 LCD Digital Clinical Centrifuge includes: - 10200316 Rotor - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Exact temperature setting via digital potentiometer Simultaneous digital display of target and actua (more)l temperatures via LCD display Actual temperature displays in medium with 0.1°C resolution when using PT1000 temperature sensor (included) Stirrer can be controlled with two microcontrollers (not included) Plate material: Glass ceramic Plate dimensions: 180 x 180 mm max. stirring capacity (H₂O): 10 L Speed range: 100 – 1500 rpm Dimensions (WxDxH): 215 x 330 x 105 mm Temperature range: 50°C to 500°C Weight: 5 kg

Stainless steel platform scale with four sensors No matter where you place the load on the platform, (more) the result will always be correct. This is due to the four sensors built into the platform. You will appreciate this especially when weighing an irregularly shaped object. It has been with us for years, and will stay for a long time to come The LCD display has accompanied us for long years. During this time it has proven its reliability. It guarantees the readability of the result from many angles and is energy efficient. Inner power No access to mains power? Power failure? No problem. Thanks to its internal rechargeable battery, the H315 scale works anyway (up to 7 hours). Power supply is available at an extra charge. As standard, the scale is equipped with a RS232 cable, to which you can connect most of the accessories from our range. Not just weighing But also parts counting, percent weighing, animal weighing and peak hold. The power of H315’s working mods. Do you require fast and repeatable weight measurement under difficult conditions? The H315 scale is made for that! Work as you like The PUE H315 terminal sits on a 3-meter cable that allows you to hang the terminal on the wall. This allows you to arrange your weighing workplace in many ways. The power of steel The use of stainless steel guarantees you a long life for the scale. It is not afraid of contact with moist objects or accidental splashes. The membrane keyboard is another argument in the discussion of the water resistance of this scale. If you need a dual-range scale, we can make one for you at an extra cost.

BINDER KB 53 refrigerated stove. Digital. Capacity 53 L. Temperature range from -10 °C to 100 °C. St (more)ability ±0.1°C. Fan adjustment range from 40% to 100%. Recovery time after opening doors for 3 seconds: 2 minutes at 37°C. A shelf. Dimensions (W*H*D): external 635*835*580 mm; internal 400*400*330 mm. 78 kg. User manual in PDF. The BINDER KB 53 refrigerated oven is high-quality equipment designed for the storage and cooling of samples in laboratory environments. With a capacity of 53 liters, this stove offers ample space to store and maintain the temperature of your samples accurately and reliably. Equipped with an efficient cooling system, this oven guarantees a constant and uniform temperature throughout its interior, which is essential for the preservation of sensitive samples. Plus, it features easy-to-use controls and a digital display for precise temperature setting and monitoring. The BINDER KB 53 refrigerated oven is an ideal option for laboratories that require safe and reliable storage of their samples.