KNF IP65 FEM 1.02 FT.18S Liquid Pump

Edwards mXDS3 Dry Scroll Pump Ultimate Pressure 0.1 mbar (0.075 Torr) Pumping Speed 2.06 CFM (3.5 m (more)^3/h^-1) Inlet Connection DN 16 ISO-KF (NW16) Features - Weighs in at just 17.2 lb. (7.8 kg) and comes with a purpose-made carry handle making it highly portable - Can typically be mounted horizontally or vertically and for convenient connection - Inlet can be orientated vertically or horizontally with a push-fit alternative available as an accessory - Delivers 2.06 CFM (3.5 m^3/h^-1) peak speed at 60Hz and 0.1 mbar ultimate pressure - Gas ballast facility incorporated in the design as standard for water vapour handling and an exhaust valve - Oil-free pump with no oil to top up, replace or dispose of - Optimized fan cooling is beneficial in reducing noise for quieter operation and a pleasant working environment - Low maintenance, with tip seal changes required over typically 2 years The Edwards Vacuum range of small dry scroll pumps is expanding with the introduction of the compact mXDS3 and mXDS3s Dry Scroll Pumps. The new mXDS3 dry scroll pump delivers 1.77 CFM (3 m^3/h^-1) pumping speed at 50Hz or 2.06 CFM (3.5 m^3/h^-1) together with an ultimate pressure of 0.1 mbar making it well suited for backing turbomolecular pumps. The mXDS3 is the standard option supplied with no inlet valve fitted, while the mXDS3s comes factory fitted with an inlet valve featuring delay opening. The mXDS3s is also supplied with an exhaust silencer. Both offer the same vacuum performance and feature an IEC connector for main supply and an on/off switch for easy control. This compact dry pump offers flexibility to the system designer and end user alike with a wide range of accessories available to choose from to meet your configuration requirements. This standard variant of the mXDS3 comes with a single phase 115V, 50/60Hz motor. Click Here to View Product Video INCLUDED: The Edwards mXDS3 Dry Scroll Pump includes: - Power Cord - Operator's Manual - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Edwards nEXT240D - ISO100 160W Turbomolecular Pump Ultimate Vacuum <6×10⁻⁸ mbar Inlet Connection  (more)DN100ISO-K Peak Pumping Speed (H2) 165 l/s Features - Reaches an ultimate pressure of 6.000 × 10⁻⁸ mbar for precise vacuum applications - Features built-in electronics compatible with TAG and TIC controllers for easy system integration - Allows for in-field servicing with minimal tooling, reducing maintenance time and cost - Upper magnetic bearing ensures clean vacuum conditions, low power consumption, and reduced vibration - Incorporates a molecular drag stage for improved pumping speed and compression ratios - Designed for long-lasting performance and low cost of ownership, enhancing value - Comes with a standard inlet screen to protect the pump and ensure optimal functionality - Offers a high level of modularity for maximum flexibility and customization nEXT turbomolecular pumps are hybrid bearing pumps with integrated controllers for pumping speeds from 47 to 1250 ls-1.The nEXT is a hybrid bearing compound turbomolecular pump. nEXT pumps combine our proven bearing technology (oil lubricated ceramic lower bearing with dry permanent magnetic upper bearing), an improved rotor design with a new molecular drag stage to deliver improved pumping speed and compression ratios, and user serviceability. They feature 24 V to 48 V DC sensorless motors with a built-in drive that is fully compatible with our range of TAG and TIC controllers.INCLUDED: The Edwards nEXT240D - ISO100 160W Turbomolecular Pump includes: - One Year Manufacturer's Warranty

Edwards nXR30i NW25 Multi Stage Roots Dry Pump Ultimate Vacuum 0.03 mbar (0.022 Torr) Inlet Connecti (more)on NW25 Displacement 25.0 m3h-1 / 14.7 ft3min-1 Features - High ultimate vacuum and rapid pumping speed ensure efficient operation across a wide range of laboratory and industrial applications - Quiet operation provides a comfortable working environment, reducing noise in sensitive areas - Freestanding design driven by a flexible coupling with either a single-phase or three-phase (four pole) motor - Achieves excellent vacuum levels, including 1 x 10⁻³ mbar without gas purge and 1.5 x 10⁻¹ mbar with gas purge - Equipped with NW25 inlet connection and a removable 15 mm nozzle outlet, allowing flexible integration into existing systems - Operates efficiently within a temperature range of 13-40°C, accommodating different environmental conditions - Facilitates easy oil changes with a maximum oil capacity of 1.05 liters and a minimum capacity of 0.75 liters - Ideal for use with analytical instruments, leak detectors, helium research, and for backing turbomolecular pumps, showcasing its versatility Edwards has revolutionised the vacuum pump market with the new nXRi high performance, compact dry pump. It delivers unrivalled pumping speeds in the most compact package, with pumping speeds of 30 to 120 m3h-1. The nXRi's lower input power and zero maintenance create real performance improvements and cost benefits across a range of applications.Analytical Instrument OEMs benefit from the ease of integration into most vacuum systems for a ready to go vacuum solution, perfect for mass spectrometry, electron microscopy and leak detection. R&D and Industrial customers will enjoy the design flexibility, oil-free and low maintenance features.Click Here to View Product Video INCLUDED: The Edwards nXR30i NW25 Multi Stage Roots Dry Pump includes: - Operator's Manual - 1 Year Manufacturer's Warranty

MORE DETAILS TO FOLLOW

Diaphragm vacuum pump KNF N022AN.18 Final pressure/ultimate vacuum (abs.) (mbar): 181 mbar (see phot (more)o) Model: N022AN18 Technical specifications: Voltage: 230 V, 50 Hz Current: 0.7 A Power: 100 W Max. pressure: 4 Bar Pump flow rate: 15 l / min External dimensions (W) x (D) x (H): 28 x 20 x 23 cm Equipment tested Year of manufacture: 2007

Heating thermostat from 20 to 200°C, with TFT color display and complete programming functions LAUDA (more) ECO stands out for its range of features and ease of use. ECO thermostats are available in Silver (LCD display; simple programming) and Gold (TFT color display; complex programming) models, equipped with a mini USB interface as standard. A LAUDA innovation is the pressure flow controller located on the front of the head. This means that flow regulation between inside and outside is possible even during operation. - The circulation pump can be adjusted to six levels - Programmer with 150 temperature/time segments separable into 5 programs - Fully electronic continuous regulator with PID action - Additional key Tmax for overtemperature protection - The ECO heating thermostat line includes transparent baths up to 100°C and stainless steel up to 200°C - The most powerful units are equipped with the energy-saving LAUDA SmartCool system - Variants in 230V; the 50 Hz are also available with natural refrigerants - Temperature graphs on display - Convenient operation with softkey cursor - Safety class III for operation with flammable and non-flammable liquids. - mini-USB interface LAUDA tank thermostats are equipped as standard with a cooling coil. The E 4 model is also equipped with a lid for the bowl and connections for external applications. A drain cock on the rear side makes changing the heat transfer liquid easy and safe. Heating performance graph of Gold immersion thermostats with stainless steel tank. Performance graph of the pump pressing on the six levels.

This Dionex UltiMate 3000 HPLC System was removed from a university lab where it was surplus to requ (more)irements. This system has been inspected and tested by a qualified engineer. As a whole the system has passed. All modules that require software have been tested with Chromeleon v 6.8 and all modules communicate successfully. This system comes with Chromeleon v 6.8 installed on a PC but does not include a license and dongle. 1x Thermo Dionex AXP Metering Auxiliary PumpS/N Z0040311Powers on - Tested 2.5ml to over 1000 psi working as should no leaks 1x Dionex UltiMate 3000 Variable Wavelength Detector VWD-3100P/N 5074.0005S/N 8022629Powers on Status ok 1x Dionex UltiMate 3000 Pump LPG-3400 ABP/N 5037.0015S/N 8022830Firmware 3.05The system has been modified by a client from a quaternary to a binary pump. Pump tested at 2.5ml a minute, pressure steady at 12000psi, no leaks.All ok 1x Dionex UltiMate 3000 SR-3000 Solvent Tray without DegasserP/N 5035.9200 1x Dionex UltiMate 3000 SRD-3600 Solvent Tray with 6 Degasser channelsP/N 5035.9230S/N 8019828Powers on. Self-check ok. Status ok. Vacuum test pass. 1x Dionex UltiMate 3000 SRD-3600 Solvent Tray with 6 Degasser channelsP/N 5035.9230S/N 1050601Powers on. Self-check ok. Status ok. Vacuum test pass. 1x Dionex UltiMate 3000 Analytical Autosampler WPS-3000 TP/N 5820.0020S/N 1000605Powers on. Self-check ok. Status ok. 1x Dionex UltiMate 3000 Column Compartment TCC-3000 SDP/N5730.0010S/N 8021955Firmware 1.20. Passed all functions test. Both switching valves work. The temperature cools and heats as should. The temperature is stable 1x Dionex UltiMate 3000 Fraction CollectorS/N 12904 AFC 3000Powers on. Connects with software. USB works but driver not present in the software 1 x Dionex UCI-50 Universal Chromatography InterfaceP/N 5911.0005S/N 8022442Powers on.

Triple Red Duo Organic 60 Ultra Pure Water Purification System This item was removed from a universi (more)ty where it was surplus to requirements. The item is in good cosmetic condition and powers on. However, we were unable to perform further testing at our facilities. Please note: The power supply is not included. Testing was carried out using a power supply from another unit. Included Components: - Avidity Carbon Pre-Filter - P/N: TR-2057 - Install Date: 26/7/23 - Avidity Cartridge Pack - P/N: TR-2050 - Install Date: 26/7/23 - Avidity Cartridge Polisher - P/N: TR-2051 - Install Date: 26/7/23 Specifications: - Model: Organic 60 Ultra Pure Water Purification System - Serial No.: Not provided

Polyscience P10N6A101B IP-100 Immersion Probe Cooler, 3 Rigid Coil Probe, -100 to -60C, 120V, 60Hz3D (more) Visualization of the Polyscience Immersion Probe CoolerThe rendered image can be freely rotated in a full 360-degree view, allowing you to zoom in, pause, and explore every angle. For enhanced detail, the rendering can also be displayed in full-screen mode. This 3D model is designed exclusively for visualization purposes and may not accurately represent the actual appearance of your product. Your browser does not support iframes. .rendering-block:nth-child(2) { width: 292px;} PolyScience Low Temperature Coolers enhance and simplify low-temperature laboratory work, providing rapid, low-cost cooling of liquids to temperatures as low as -100C. Typical applications include the cooling of exothermic reactions, vapor and solvent trapping, and impact testing. They’re also ideal for extending the temperature range of non-refrigerated circulators to below ambient and boosting the cooling capacity of refrigerated circulators. Enhance and simplify your low-temperature laboratory work with a PolyScience Low Temperature Cooler. Available in both immersion probe and flow-through styles, they provide rapid, low-cost cooling of liquids to temperatures as low as -100C. Typical applications include the cooling of exothermic reactions, freeze point determinations, freeze drying, impact testing, lyphilization, and vapor and solvent trapping. Features Continuous cooling to temperatures as low as -100C Designed to run at maximum cooling An economical alternative to dry ice or liquid nitrogen Excellent for trapping applications, freeze drying, and rapidly cooling small volumes of liquids INCLUDED: The Polyscience P10N6A101B IP-100 Immersion Probe Cooler, -100°C to -60°C, 85W; 120V includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

F1 Mass Standard - knob weights without adjustment chamber - set (1 mg - 2 kg), plastic box Number o (more)f pieces in the set: 27

The series of MUYA electromagnetic high resolution modules is designed to be incorporated into custo (more)mer’s weighing systems. A new generation’s MUYA 5 ultra-microbalance module is designed to fulfill our customers’ high expectations regarding mass measurements carried out with the greatest precision. The system of internal adjustment improves the quality of work even more by affecting measurements results. Operation of MUYA electromagnetic high resolution module is based on an electromagnetic digital converter. Compact design and inbuilt electronics ensure great possibilities when it comes to module's adaptation capabilities. Due to high precision of a measurement it is recommended to build the module into the customer's device (e.g. anti-draft chamber), thus limiting ambient conditions influence. Power supplier for MUYA weighing module comes standard.