MEMMERT UF110 universal oven / incubator / 300 °C / 108 liters

Yamato DKN-402C Programmable Forced Convection Oven 90L, 115V Temperature Range Ambient +10°C to 26 (more)0°C Temperature Distribution Accuracy ± 2.5°C (at 210°C) Chamber Volume 90L Features - Best seller based on excellent performance and affordability - Superior temperature accuracy - DKN302C/312C/402C/412C/602C/612C models come with observation windows - Programmable PID controller for easy program settings (30-step, 3-pattern program controller with repeat functions) - Fixed setting, Quick Auto stop, Auto stop, Auto start, Program operating modes with easy control capabilities - Increased safety and self-diagnostic functions - Overheating prevention and calibration off-set are possible with auxiliary functions - Easy to use and maintain - Built in exhaust ports Programmable 90L forced convection constant temperature oven with extended functions and safety features. Bestseller based on excellent performance and affordability. Superior temperature accuracy. Comes with an observation window. Programmable PID controller for easy program settings (30-step, 3-pattern program controller with repeat functions). Fixed setting, Quick Auto stop, Auto stop, Auto start, Program operating modes with easy control capabilities. Overheating prevention and calibration off-set are possible with auxiliary functions. Easy to use and maintain. Equipped with built in exhaust ports. Operating temp ambient +10~260°C. INCLUDED: The Yamato DKN-402C Programmable Forced Convection Oven 90L, 115V includes: - 2 x Shelves w/ Brackets - Power Cord - Operator's Manual - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Yamato DG-840C Natural/Forced Convection Glassware Drying Oven with Sterilization Lamp 445L, 115V Te (more)mperature Range Ambient +5°C to 70°C Heater Power 1.34 kW Chamber Volume 445L Features - Large window for easy observation - Can be used to store instruments after drying - Highly efficient heat insulation material for both internal and external structure - Adjustable foot for stability on uneven floors - Mobile on casters (DG800C/810C/840C/850C) - Equipped with stainless steel pipe heater and water receiving plate at the bottom - Stainless steel interior, easy to clean and highly resistant to corrosion - DG440C/450C/840C/850C installed with filter at air in-take port, exhaust fan and germicidal lamp for fast drying - Dial setting and digital display of temperature control and timer 445L glassware drying natural and forced convection oven with large observation window for easy observation. Equipped with filter at air in-take port, exhaust fan and germicidal lamp for fast drying. Highly efficient heat insulation material for both internal and external structure. Adjustable foot for stability on uneven floors. Equipped with stainless steel pipe heater and water receiving plate at the bottom. Stainless steel interior, easy to clean and highly resistant to corrosion. Dial setting and digital display of temperature control and timer. Can be used to store instruments after drying. Mobile on casters. Operating temp ambient +5~70°C. INCLUDED: The Yamato DG-840C Natural/Forced Convection Glassware Drying Oven with Sterilization Lamp 445L, 115V includes: - 4 x Shelves w/ Brackets - Water Receiving Plate - Power Cord - Operator's Manual - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Memmert UF260TS Forced Circulation Pass-Through Oven 256L, 115V Working Temperature Range At least  (more)10°C above ambient to +250°C Setting Resolution (Temperature) Up to 99.9°C: 0.1°C / From 100°C: 0.5°C Chamber Volume 256L (9.04 Cu. Ft.) Features - Working temperature range from at least 10°C above ambient to +250°C - Volume capacity of 256L (9.04 Cu. Ft.) with stainless steel interior - TwinDISPLAY with adaptive multifunctional digital PID-microprocessor controller and dual high-definition TFT-color displays - Forced air circulation adjustable in 10% steps, with pre-heated fresh air admixture - AutoSAFETY system with integrated over- and undertemperature protection - Supports up to 9 shelves with a maximum chamber load of 661 lbs - Three freely selectable temperature calibration points - Function SetpointWAIT ensures process begins only once set temperature is reached The Memmert UF260TS Forced Circulation Pass-Through Oven 256L, 115V is designed to provide exceptional precision and reliability for temperature-sensitive processes. With a working temperature range of 10°C above ambient to +250°C and a spacious 256-liter stainless steel interior, this oven is perfect for demanding laboratory and industrial applications. The TwinDISPLAY system, featuring two high-definition TFT-color displays, allows for precise control, while the adaptive multifunctional PID-microprocessor controller ensures accurate and uniform temperature management. Forced air circulation can be adjusted in 10% increments, with a pre-heated fresh air admixture, enhancing efficiency and temperature stability. This pass-through oven offers advanced safety features, including the AutoSAFETY system with integrated over- and undertemperature protection, along with visual and acoustic alarms. With support for up to nine shelves and a maximum chamber load of 661 lbs, the UF260TS can accommodate large samples or multiple smaller items with ease. Additional features such as the SetpointWAIT function, which ensures the process begins only after the set temperature is reached, and the HeatBALANCE function, which optimizes heating performance, make this oven a valuable asset for any lab or production environment. INCLUDED: The Memmert UF260TS Forced Circulation Pass-Through Oven 256L, 115V includes: - 2 Stainless Steel Grid - Tilt Protection Wall Bracket - Base Cladding with Screw Connection - Calibration Certificate - Power Cord - Operator's Manual - Manufacturer's Documentation - 3 Year Manufacturer's Warranty

Memmert UN110plus Natural Convection Oven 108L, 115V Setting Temperature Range +20°C to +300°C Conv (more)ection Type Natural Convection Chamber Volume 108 L (3.8 cu. ft.) Features - 108 L (3.8 cu. ft.) chamber volume ideal for various sample sizes - Precise temperature control from +5°C above ambient to +300°C for a wide range of applications - TwinDISPLAY: Adaptive multifunctional digital PID-microprocessor controller with 2 high-definition TFT-color displays - Natural convection ensures uniform heat distribution without the need for a fan - 2 Pt100 sensors DIN Class A for enhanced accuracy and mutual monitoring in case of sensor failure - AtmoCONTROL software allows for programming, managing, and transferring programs via Ethernet or USB - AutoSAFETY integrated over- and undertemperature monitor with visual and acoustic alarms for maximum safety - Durable stainless steel interior and exterior, corrosion-resistant and easy to clean The Memmert UN110plus Natural Convection Oven 108L, 115V is designed to provide precise temperature control for a wide range of scientific and industrial applications. With a chamber volume of 108 liters (3.8 cu. ft.), it offers ample space for various sample sizes. Equipped with TwinDISPLAY, an adaptive multifunctional digital PID-microprocessor controller, this oven features two high-definition TFT-color displays for clear and intuitive adjustments. The temperature range extends from +5°C above ambient to +300°C, allowing it to handle sensitive and demanding heating processes with accuracy, aided by two Pt100 sensors that mutually monitor each other to ensure consistent performance. This oven excels in safety and functionality with AutoSAFETY features that include over- and undertemperature monitoring, visual and acoustic alarms, and mechanical temperature limiter protection. Natural convection ensures uniform heat distribution without the need for a fan, making it ideal for delicate samples. Additional features such as AtmoCONTROL software for easy program management and data logging, and a robust, easy-to-clean stainless steel interior with reinforced ribbing, ensure both durability and ease of use in daily laboratory operations. INCLUDED: TheMemmert UN110plus Natural Convection Oven 108L, 115V includes: - 2 Stainless Steel Grids - Tilt Protection Wall Bracket - Calibration Certificate - Power Cord - Operator's Manual - Manufacturer's Documentation - 3 Year Manufacturer's Warranty

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Ohaus Navigator portable scale, with plate Ø 145 mm. Robust and multifunctional scales for a wide ra (more)nge of general weighing applications.

This listing is for 1 of 2 Watson Marlow SCIQ 323 Peristaltic Pump. The unit is in full working con (more)dition and is ready for immidate realese. The Sci-Q 323 range is designed exclusively for scientific pumping needs, and brings a stunning level of performance and quality to the benchtop.   323S high-performance manual control variable speed pump • High-performance microprocessor controlled pumps • 323S can be extended with 313X extension pumpheads to five channels • Flow rates to 2000ml/min and 133:1 speed control ratio   323S speed adjusts in 1rpm steps from 3 to 400rpm. keypad lock prevents tampering or accidental changes, auto restart for mains failure recovery, switchable between 100-120V or 220-240V, MemoDose facility for accurate single shot dosing.   323S drives may also be fitted with 314 four roller pumpheads if lower pulsing is required, or with 313D2 or 314D2 pumpheads which accept 2.4mm wall thickness tubing for higher pressure operation or pumping more viscous fluids.   For low-flow pumping, up to ten channels, 323S drives may be fitted with 314MC (four-roller) microcassette pumpheads, which can be extended to ten channels by adding one 314MCX or 318MCX extension pumphead. This pump is fitted with one 314MC head and will be supplied with an additional spare 314MC as per images   Serial# H041702   Dims 27cm (D) x 22cm (W) x 12cm (H)

COMBISTORAGE CS360 - CHEMISAFE CERTIFIED SAFETY CABINET General features: - Entirely made of electro (more)galvanized AISI304 stainless steel with a thickness of 1 to 1.5 mm, cold bent - Gray RAL7035 - External finish made of acid resistant epoxy resin and passage through a thermal tunnel at 200 °C Characteristics of the TYPE 90 COMPARTMENT FOR FLAMMABLE PRODUCTS: - Cabinet insulation with high density rock wool panels and calcium sulphate panels for the compartment dedicated to flammables - Internal finish with melamine panels highly resistant to chemical and aggressive vapours - Facility that allows replacement of spare parts if necessary - Automatic closing of the doors when the ambient temperature exceeds 50°C - 30 mm thermo-expanding insulating gaskets which, in the event of a temperature increase, guarantee perfect sealing of the cabinet according to the EN14470-1 standard - Air inlet and outlet with certified fire dampers that close the ducts when the temperature exceeds 70 °C according to DIN 4102-6 - Closing and locking system that allows the cabinet doors to be kept open and to close them automatically in the event of an ambient temperature exceeding 50 °C - Anti-spark hinge which guarantees perfect solidity of the doors - Possibility of having a wardrobe with door or drawer according to the models - Lock and key - Equipped with a retention tray with painted steel grid that serves as a shelf Characteristics of the ACIDS/BASES COMPARTMENT: - Internal finish with melamine panels highly resistant to chemical and aggressive vapours - Facility that allows replacement of spare parts if necessary - Opening doors at an angle greater than 110° - Lock and key - Height-adjustable shelf in plastic-coated steel and stainless steel - Cabinet equipped with an integrated ventilation system with external connection or arranged for ventilation via a Ø 100 mm flange - Grounded cabinet - Adjustable leveling feet - ISO 3864: Signs with pictograms - Cabinets certified according to EN14470-1, EN61010 and EN16121 standards - Certified fire resistant 90 minutes Supplied: - Acids/Bases: 1 plastic-coated steel shelf and 1 stainless steel shelf (max load 60 Kg uniformly distributed) - Flammable: 1 retention tank with painted steel grid Optional: - Shelves - Timer - Visual and acoustic alarm system - Glide for moving wardrobes

Pfeiffer HiCube 80 Neo, 63 ISO-K, MVP 030-3 Turbo Pumping Station Final Pressure 1 x 10-7 hPa / 7.5  (more)x 10-8 Torr / 1 x 10-7 mbar Backing Pump Speed 1.8 m³/h / 1.06 cfm / 30 l/min Pumping Speed for N2 67 l/s Features - Compact series of pumping stations for all high vacuum applications - Simple operation with 7in. touch display - Remote control via web server available - Compatible with a wide variety of applications - Reliable and robust The Pfeiffer HiCube 80 Neo, 63 ISO-K, MVP 030-3 Turbo Pumping Station is a compact, high-performance solution for high vacuum applications. It offers user-friendly operation via a 7-inch touch display, with remote control capabilities through a web server. Designed for reliability and versatility, this system handles a wide range of demanding tasks. Featuring a final pressure of 1 x 10⁻⁷ mbar (7.5 x 10⁻⁸ Torr) and a maximum pumping speed of 1.8 m³/h, it ensures efficient and consistent vacuum generation. Equipped with the Pfeiffer MVP 030-3 diaphragm backing pump and the HiPace 80 Neo turbopump, this unit provides a pumping speed of 67 l/s for nitrogen. It operates quietly, with an emission sound pressure level of ≤50 dB(A), and is suitable for worldwide use with its wide range of input voltages (100-240 V AC). The air-cooled system, compact design, and flexible connection options make it an ideal solution for various high-vacuum needs. INCLUDED: The Pfeiffer HiCube 80 Neo, 63 ISO-K, MVP 030-3 Turbo Pumping Station includes: - Backing Pump - Pfeiffer MVP 030-3 Diaphragm Pump - Protective Cap for High Vacuum Flange - Power Cord - Operator's Manual - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Motic PSM-1000E Trinocular Upright Industrial Microscope, Standard System Common Applicatoins Semic (more)onductor Analysis, and Laser Based Research Methods Optical System Specialized Lenses Design For NUV to Visible NIR Illumination Port for Fiber-Optic Coaxial Illumination Features - Ergonomic Design: The design of the PSM-1000 encourages the optimal amount of usability without sacrificing comfort. - Laser Work: The PSM-1000 is standard equipped for laser work covering the spectrums ranging from 355nm [UV] to 532nm [Green] to 1064nm [IR]. - Focusing Block: Rated for load weights up to 45lbs., image focal planes can be adjusted at 1μm resolutions within the total 50mm stroke. - Adjustable Nosepiece: Forward facing and equipped for four M26 x 1/36" (0.706) type objectives, the PSM-1000's nosepiece is dovetail mounted for molding to different types of research and usage. - Trinocular tilting head 3°-30° provides ease of use across a variety of applications. The PSM1000E is an OEM-ready instrument for the best images of flat, reflective specimens. Samples from metallurgy and the semiconductor field are treated by ELWD Plan Apochromatic objectives with a stupendous resolution power. The large FOV24 with an erect, true sided image allows fast orientation and manipulation work. INCLUDED: The Motic PSM-1000E Trinocular Upright Industrial Microscope, Standard System includes: - Adjustable Nosepiece - Widefield WF10X/24mm Eyepiece - Power Cord - Operator's Manual - Manufacturer's Documentation - 5 Year Manufacturer's Warranty

Accuris MR9610-PC SmartReader UV-Vis PC Software The Accuris MR9610-PC SmartReader UV-Vis PC Softwar (more)e is designed to work seamlessly with the Accuris MR9610 and MR9611 SmartReader Microplate Reader UV-Vis. This software enables users to efficiently control and monitor the microplate reader from a computer with convenience. The software provides an easy-to-use interface for data acquisition, analysis, and storage, allowing users to customize their experiments and protocols with ease. INCLUDED: The Accuris MR9610-PC SmartReader UV-Vis PC Software includes: - Email Code to Download Software - Manufacturer's Documentation - 2 Year Manufacturer's Warranty