Büchi Glass Oven B-580 Glass Oven Drying Glasofen 40...300°C 100-250 mL

The 874 Oven Sample Processor is used for automatic thermal sample preparation in Karl Fischer titra (more)tion. The oven method is particularly suitable for samples that do not release their water until higher temperatures have been reached, for sparingly soluble samples, or those that react with the KF reagent.

This Advanced Cell Diagnostics HybEZ Oven  Cat no. 241000ACD-2 was removed from a university la (more)b where ti was surplus to requirements. The unit powers up and has been tested with a digital thermometer (not included). When set to 37˚C the thermometer measured 45.6˚C.When set to 74.9˚C (max) the display showed 74.9˚C and the thermometer measured 80˚C. It is in reasonably good cosmetic condition with some marks from use.

Yamato FP-303 High Performance Muffle Furnace 7.5L, 115V Operating Temperature Range 100°C to 1150° (more)C Max. Temperature Reaching Time ~90 min. Internal Capacity 7.5L Features - RCF-free chamber - High-temperature accuracy at ±1.0°C - Upgraded with long-life R-thermocouple sensors - High accuracy controller for better operability and visibility - Excellent heat tightness with a firmly sealed chamber door - Program operation of maximum 99 steps, 99 patterns, with repeat operation function - High-quality alumina porcelain hot plate where the heater is not exposed to the inner chamber preventing contamination of samples - Safety features include self-diagnostic functions, calibration off-set, key lock function, auto-recovery after a power failure, earth leakage breaker, automatic overheat prevention device, and independent overheat prevention device High performance 7.5L muffle furnace with a microprocessor-controlled thermo-regulator characterized by excellent repeatability and features temperature resistant paint. High accuracy controller for better operability and visibility. Excellent heat tightness with a firmly sealed chamber door. High temperature accuracy at ±1.0°C. Upgraded with long life R-thermocouple sensors. High quality alumina porcelain hot plate where heater is not exposed to the inner chamber preventing contamination of samples. Program operation of maximum 99 steps, 99 patterns, with repeat operation function. Safety features include self-diagnostic functions, calibration off-set, key lock function, auto recovery after power failure, earth leakage breaker, automatic overheat prevention device and independent overheat prevention device. Optional items include exhaust system, N₂ gas loading device (with flow meter), temperature output terminal, time-up output terminal, sample tray, external communication terminal (RS232C), external communication adapter, event output terminal, operation signal output terminal and furnace floor plate. Temperature range 100°C or 1150°C. INCLUDED: The Yamato FP-303 High Performance Muffle Furnace 7.5L, 115V includes: - Exhaust port cap, fuse, furnace floor plate - Power Cord - Operator's Manual - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Yamato DG-840C Natural/Forced Convection Glassware Drying Oven with Sterilization Lamp 445L, 115V Te (more)mperature Range Ambient +5°C to 70°C Heater Power 1.34 kW Chamber Volume 445L Features - Large window for easy observation - Can be used to store instruments after drying - Highly efficient heat insulation material for both internal and external structure - Adjustable foot for stability on uneven floors - Mobile on casters (DG800C/810C/840C/850C) - Equipped with stainless steel pipe heater and water receiving plate at the bottom - Stainless steel interior, easy to clean and highly resistant to corrosion - DG440C/450C/840C/850C installed with filter at air in-take port, exhaust fan and germicidal lamp for fast drying - Dial setting and digital display of temperature control and timer 445L glassware drying natural and forced convection oven with large observation window for easy observation. Equipped with filter at air in-take port, exhaust fan and germicidal lamp for fast drying. Highly efficient heat insulation material for both internal and external structure. Adjustable foot for stability on uneven floors. Equipped with stainless steel pipe heater and water receiving plate at the bottom. Stainless steel interior, easy to clean and highly resistant to corrosion. Dial setting and digital display of temperature control and timer. Can be used to store instruments after drying. Mobile on casters. Operating temp ambient +5~70°C. INCLUDED: The Yamato DG-840C Natural/Forced Convection Glassware Drying Oven with Sterilization Lamp 445L, 115V includes: - 4 x Shelves w/ Brackets - Water Receiving Plate - Power Cord - Operator's Manual - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Yamato ADP-200C Benchtop Vacuum Oven 10L, 115V Operating Temperature Range 40~240°C Operating Pres (more)sure Range 101 - 0.1kPa (760 - 1 Torr) Internal Capacity 10L Features - Easy input of parameters and settings - Digital PID controller supports fixed temperature, quick auto-stop, auto stop, auto start and program operations. - Self-diagnostic and overheating prevention functions - Silicon rubber door seal prevents air from leaking - Independent over heating prevention device for each circuit - Customizable with N₂ gas inlet and communication ports - Calibration off-set function - Easy maintenance Introducing our Yamato Programmable Vacuum Drying Oven, a compact and versatile solution ideal for laboratory settings. This 10L, 115V oven offers advanced features designed to enhance safety and efficiency. With easy parameter input and a digital PID controller supporting various temperature modes, including fixed temperature, quick auto-stop, auto-start, and program operations, your experiments will run smoothly. Safety is paramount with self-diagnostic and overheating prevention functions, while the silicon rubber door seal ensures an airtight chamber. Individual overheating prevention devices for each circuit add an extra layer of protection, and the oven is customizable with N₂ gas inlet and communication ports. Plus, the calibration offset function ensures precision, and easy maintenance keeps your equipment in top condition. Safety features include sensor trouble detection, SSR, short circuit detection, heater disconnecting detection, memory error prevention, and temperature measurement error prevention.INCLUDED: The Yamato ADP-200C Benchtop Vacuum Oven 10L, 115V includes: - Shelf Plate (2 pcs.) - Power Cord - One Year Manufacturer's Warranty

Memmert UN260 Natural Convection Oven 256L, 115V Temperature Range Ambient +5°C to 300°C Convection (more) Type Natural Convection Chamber Volume 256 L Features - Spacious 256 L (9 cu.ft.) stainless steel chamber for diverse sample sizes - Temperature range from +5°C above ambient to +300°C for various applications - 1 Pt100 sensor DIN class A in a 4-wire circuit for precise temperature control - SingleDISPLAY digital PID-microprocessor with high-definition TFT color display - Natural convection system provides uniform heating throughout the chamber - Electronically adjustable air flap for controlled pre-heated fresh air - Supports up to 9 stainless steel grids, with a max load of 263 lbs - Auto diagnostic system and overtemperature monitor for enhanced safety The Memmert UN260 Natural Convection Oven 256L, 115V offers versatile laboratory heating with a spacious 256 L (9 cu.ft.) stainless steel chamber, ideal for a range of sample sizes. Its temperature range from +5°C above ambient to 300°C and precise control, enabled by a Pt100 sensor DIN class A in a 4-wire circuit, ensure optimal accuracy. Equipped with a SingleDISPLAY digital PID-microprocessor and high-definition TFT color display, this oven makes temperature adjustments intuitive and precise. The natural convection system promotes uniform heating, and the electronically adjustable air flap allows controlled pre-heated fresh air intake. Built to support up to 9 stainless steel grids with a maximum load of 263 lbs, the UN260 also includes an auto diagnostic system and overtemperature monitor for safe, reliable operation in demanding environments. INCLUDED: The Memmert UN260 Natural Convection Oven 256L, 115V includes: - 2 Stainless Steel Grids - Tilt Protection Wall Bracket - Calibration Certificate - Power Cord - Operator's Manual - Manufacturer's Documentation - 3 Year Manufacturer's Warranty

CABINET CSB60UB - CHEMISAFE Modular solutions for storing chemicals. - Entirely made of 15/10 mm th (more)ick electrogalvanized steel sheet, cold bent - External finish made of 90 micron acid resistant epoxy resin and passage through a thermal tunnel at 200 °C - Monocoque construction with feet for leveling the cabinets - Simple single layer swing doors - Lock and key - Door opening at an angle of 110° - External zip in corrosion resistant plastic - Compartments equipped with fixed retention shelves made of plasticized/painted/stainless steel with adjustable height - Connection collar Ø 125 mm - Standardized pictograms according to ISO 3864 standards Supplied: - 2 ripiani realizzati in acciaio plastificato (carico max 40 Kg distribuiti uniformemente) Optional: - Shelves - Timer - Plinth - Retention tank - Door open alarm - Ventilation - Filter

Stirring quantity max.: 20 l Speed range: 0/50 – 1700 rpm Stirring bar length max.: 80 mm Heating te (more)mperature range: room temp. – 340 °C Speed control: stepless Connection for ext. temperature sensor: PT1000 Control accuracy with sensor: 1 ±K Plate dimensions: Ø 135 mm Dimensions (WxHxD): 160 x 95 x 270 mm Weight: 2.5 kg

Memmert ICO150 CO2 Incubator 156L, 115V Temperature Range Ambient +5°C to 50°C Temperature Uniformi (more)ty ± 0.3°C at 37°C Chamber Volume 156L (5.5 cu. ft.) Features - Expert precision and control for optimal protection of cultures - User-friendly, intuitive operating concept for ease of use - High-quality, corrosion-resistant stainless steel construction for durability and cleanliness - Easily cleanable inner chamber and housing - Rapid heating to setpoint without overshoots for consistent results - Rounded interior edges for simplified, thorough cleaning - Interior sterilization possible at 180°C for 60 minutes without removing sensors - Integrated data logger and adjustable digital timer from 1 minute to 99 days - AtmoCONTROL software for programming, data logging, and device monitoring - SetpointWAIT function ensures process timing starts only when set temperature is reached - Alarm notifications to mobile devices for enhanced safety and monitoring - Battery-buffered ControlCOCKPIT ensures continuous CO2 control even during power outages The Memmert ICO150 CO2 Incubator 156L, 115V offers unparalleled precision and control for demanding laboratory applications, ensuring optimal protection for cell cultures, bacteria cultures, and tissue cultures. Designed with user-friendliness in mind, it features an intuitive operating system complemented by a high-quality stainless steel inner chamber and housing that are both corrosion-resistant and easy to clean. This incubator excels in maintaining a hygienic environment with its rounded interior edges and the ability to sterilize the interior at 180°C for 60 minutes without removing sensors, promoting effortless cleaning and maintenance. Equipped with an advanced control system, the ICO150 reaches desired temperatures swiftly without overshoots, and it includes a battery-buffered ControlCOCKPIT for continuous CO2 control, even during power outages. Alarm notifications can be sent directly to your mobile device, ensuring the safety and integrity of the chamber's contents. The incubator comes with an integrated data logger and a digital timer that can be set from 1 minute to 99 days and 23 hours, supporting complex ramping processes and precise temperature control. Further enhancing its functionality, the ICO150 features the AtmoCONTROL software for easy programming and online monitoring of up to 32 connected devices. The software enables simple drag-and-drop input of values and can send automatic alarm messages to multiple email addresses. The SetpointWAIT function ensures that process times start only when the target temperature is reached at all monitoring points. With its robust construction and high-end safety features, the Memmert ICO150 CO2 Incubator is an indispensable tool for any research facility focused on cell and tissue culture. INCLUDED: The Memmert ICO150 CO2 Incubator 156L, 115V includes: - 2 x Stainless Steel Perforarated Shelf - 1 x Stainless Steel Water Tray - Gas Connection Hose - 2 x Silicone Plugs - USB Drive w/ Software & AtmoCONTROL Manual - Calibration Certificate - Power Cord - Operator's Manual - Manufacturer's Documentation - 3 Year Manufacturer's Warranty

Mild steel powder coated weighing platform We provide you with mild steel powder coated weighing pla (more)tforms with readability [d] from 1 g to 100 g and maximum capacity [Max] from 3 kg to 300 kg. The platforms have a square shape of 300 x 300 mm or a rectangular shape of 400 x 500 mm or 500 x 700 mm. Use the potential Our platforms can work with one of eight weighing terminals to choose from: PUE CY10, PUE H315, PUE C315, PUE C32, PUE 7.1, PUE HX7, PUE HY10 and PUE 5. Power of steel The use of stainless steel for the pan guarantees you a long life of the platform. Fearless of its contact with moist objects or accidental splashing. The frame is made of mild steel. Mild steel powder coated weighing platforms are marked by a high degree of protection IP 65.

Gilson 36110500 4-Block Digital Dry Bath The Gilson 36110500 4-Block Digital Dry Bath delivers preci (more)se temperatures to your samples using digital temperature and time controls. The aluminum blocks (sold separately) concisely fit tubes from 0.5 to 50 mL. The Digital Dry Bath offers convenient digital temperature and time controls with built-in calibration functionality, improving the reliability and reproducibility of your reactions without external thermometers or timers. The Digital Drybath provides a temperature range of Ambient +5°C to 130°C that is adjustable in 0.1°C increments. The timer can be set for up to 999 minutes. Each dry bath is supplied with an insulated block lifter to remove hot blocks. INCLUDED: The Gilson 36110500 4-Block Digital Dry Bath includes: - Insulated Block Lifter - Power Cord - Operator's Manual - 2 Year Manufacturer's Warranty