Advanced Cell Diagnostics HybEZ Oven Cat no. 241000ACD-2 Lab

VELP FOC 250I Refrigerated Thermostat Incubator / Drying Oven Total volume: 225 litres FOC225I Usefu (more)l internal volume: 196 litres Temperature range: 3.0 to 50.0 ° C Internal temperature indicated by a display Temperature resolution: 0.1 ° C Electronic thermoregulation system: AUTO-TUNING 2 internal electrical outlets Number of shelves included: 4 Power: 350W Weight: 40 kg Dimension (WxHxD): 540x1300x560mm (21.6x23.2x23in) With internal glass port Continuous ventilation and the Auto-Tuning thermoregulation system ensure temperature uniformity throughout the chamber. The temperature can be set from 3 to 50 °C, the reading on the display refers to the actual internal temperature. The FOC 225I is equipped with two internal sockets controlled by an external switch

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Corning ACI oven / incubator

Yamato FP-413 High Performance Muffle Furnace 11.3L, 220V Operating Temperature Range 100°C to 1150 (more)°C Max. Temperature Reaching Time ~80 min. Internal Capacity 11.3L Features - RCF-free chamber - High-temperature accuracy at ±1.0°C - Upgraded with long-life R-thermocouple sensors - High accuracy controller for better operability and visibility - Excellent heat tightness with a firmly sealed chamber door - Program operation of maximum 99 steps, 99 patterns, with repeat operation function - High-quality alumina porcelain hot plate where the heater is not exposed to the inner chamber preventing contamination of samples - Safety features include self-diagnostic functions, calibration off-set, key lock function, auto-recovery after a power failure, earth leakage breaker, automatic overheat prevention device, and independent overheat prevention device High performance 11.3L muffle furnace with a microprocessor-controlled thermo-regulator characterized by excellent repeatability and features temperature resistant paint. High accuracy controller for better operability and visibility. Excellent heat tightness with a firmly sealed chamber door. High temperature accuracy at ±1.0°C. Upgraded with long life R-thermocouple sensors. High quality alumina porcelain hot plate where heater is not exposed to the inner chamber preventing contamination of samples. Program operation of maximum 99 steps, 99 patterns, with repeat operation function. Safety features include self-diagnostic functions, calibration off-set, key lock function, auto recovery after power failure, earth leakage breaker, automatic overheat prevention device and independent overheat prevention device. Optional items include exhaust system, N₂ gas loading device (with flow meter), temperature output terminal, time-up output terminal, sample tray, external communication terminal (RS232C), external communication adapter, event output terminal, operation signal output terminal and furnace floor plate. Temperature range 100°C or 1150°C. INCLUDED: The Yamato FP-413 High Performance Muffle Furnace 11.3L, 220V includes: - Exhaust port cap, fuse, furnace floor plate - Power Cord - Operator's Manual - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Heating thermostat from 20 to 100°C, with TFT color display and complete programming functions LAUDA (more) ECO stands out for its range of features and ease of use. ECO thermostats are available in Silver (LCD display; simple programming) and Gold (TFT color display; complex programming) models, equipped with a mini USB interface as standard. A LAUDA innovation is the pressure flow controller located on the front of the head. This means that flow regulation between inside and outside is possible even during operation. - The circulation pump can be adjusted to six levels - Programmer with 150 temperature/time segments separable into 5 programs - Fully electronic continuous regulator with PID action - Additional key Tmax for overtemperature protection - The ECO heating thermostat line includes transparent baths up to 100°C and stainless steel up to 200°C - The most powerful units are equipped with the energy-saving LAUDA SmartCool system - Variants in 230V; the 50 Hz are also available with natural refrigerants - Temperature graphs on display - Convenient operation with softkey cursor - Safety class III for operation with flammable and non-flammable liquids. - mini-USB interface LAUDA tank thermostats are equipped as standard with a cooling coil. A drain cock on the rear side makes changing the heat transfer liquid easy and safe. . Graph of the heating performance of the Silver and Gold thermostats in the models with transparent polycarbonate tank. Performance graph of the pump pressing on the six levels.

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Samples and applications - Preparation of foamy mixtures (ice cream, butter, margarine, icing) and s (more)preadable creams - Preparation of tablets coatings - Preparation of pharmaceutical ointments and creams - Preparation of cosmetic products (lip balm, soap, shampoo, conditioner, creams, lipstick, mascara) - Preparation of pigments, inks, paints - Preparation of biodiesel and dispersion of petroleum derivatives (e.g., asphalt) TECHNICAL DATA - Rotor diameter: 15 mm - Stator diameter: 20 mm - Stator/rotor gap: 0.5 mm - Volume (H2O): 50 - 2,000 ml - Immersion depth: 40-175 mm - Max. speed: 25,000 rpm - Max. circumferential speed: 19.6 m/s - Ultimate fineness, emulsions: 1-7 µm - Ultimate fineness, suspensions: 5-40 µm - Max. allowable working temperature: 180 °C - Materials in contact with the medium: AISI 316L, PTFE - Suitable for solvents: Yes - Sterilization and cleaning methods: it is possible to sterilize all the components of the dispersing tool in different ways according to the construction materials and the sample processed

IKA R 3004.1 Blade stirrer Maximum Speed ≤ 1000 rpm Flow Type Radial Material Stainless Steel Featur (more)es - Generates radial flow for efficient mixing from both top and bottom - Suitable for aerating low viscosity media and homogenizing solids in liquids - Designed for use at medium to high speeds for diverse applications - Constructed from AISI 316L / 1.4571 stainless steel for durability and corrosion resistance - Operable within an ambient temperature range of 5 - 40 °C for versatile lab environments The R 3004.1 Blade Stirrer is specifically engineered to create a radial flow, effectively mixing materials from both the top and bottom for comprehensive results. Ideal for aerating low viscosity media and homogenizing solids in liquids, it's suited for medium to high-speed applications across a broad spectrum of laboratory uses. Featuring a 50 mm stirrer diameter and a 565 mm shaft length, this stirrer is made from AISI 316L / 1.4571 stainless steel, ensuring durability and longevity. Designed to operate within an ambient temperature range of 5 - 40 °C, it offers a perfect blend of functionality and practicality for professional settings.INCLUDED: The IKA R 3004.1 Blade stirrer includes: - IKA R 3004.1 Blade stirrer - Manufacturer's Documentation - 2 Year Manufacturer's Warranty