Yamato FP-413 High Performance Muffle Furnace 11.3L, 220V

UVP Laboratory Products HB-1000 Hybridizer Hybridization Oven Lab This item was removed from a unive (more)rsity where it was surplus to requirement. The unit powers up and is in good working order (thermometer not included).

This item has just arrived in our stock. Please enquire for further details.

The 874 Oven Sample Processor is used for automatic thermal sample preparation in Karl Fischer titra (more)tion. The oven method is particularly suitable for samples that do not release their water until higher temperatures have been reached, for sparingly soluble samples, or those that react with the KF reagent.

BARNSTEAD Thermolyne 1300 Muffle Furnace FB1310M-33 Model: FB1310M-33 Capacity: 1.3 litres Working t (more)emperature limit: 1100ºC Continuous operating temperature: 982ºC Table top muffle Heating volume: 100 X 95 X 110mm External dimensions: 200 X 335 X 220 mm 1050 watts / 220V Environmental operating conditions: 17 to 27ºC, humidity less than 80% non-condensing Average cosmetic condition, numerous traces of rust

MEMMERT UN 110 drying oven with forced convection 300°C Equipment never used, decommissioned In its  (more)original packaging. Year of manufacture: 2024 Model: UN110 drying oven / incubator - new generation Capacity: 108 liters Temperature range: Ambient +10°C / +300°C Integrated digital temperature display 2 stainless steel shelves Power supply: 230 V Frequency: 50-60 Hz Power: 2800 W External dimensions (W) x (D) x (H): 745 x 584(+56) x 864 mm Internal dimensions (W) x (D) x (H): 560 x 400 x 480 mm Weight: 74 kg SingleDISPLAY

BINDER BD-115 incubator / oven with forced convection 100 ° C Model: BD115 ventilated Capacity: 115  (more)liters Temperature range: Room temperature plus 5 ° C to 100 ° C Inner glass door Integrated digital temperature display 2 shelves Cable passage: Ø 30 mm (on the right wall) Power supply: 230 V, Frequency: 50-60 Hz, Power: 400 W, Internal dimensions: 60 x 40 x 48 cm Overall dimensions: 83.5 x 75 x 70.5 cm Weight: 61 kg Year of manufacture: 2010 Tested at 37 ° C

Accuris AccuCheck Pipette Calibration System (W3002A-120 Balance with W3110 Anti Evaporation Trap) T (more)he Benchmark Scientific W3002A120ACS Accuris AccuCheck Pipette Calibratlon System combines the W3002-120A touch screen analytical balance with an anti evaporation trap accessory and built-in pipette calibration software. Together, this standalone pipette calibration system is easy for any lab tech to use for the ISO 8655 method of pipette calibration for variable volume pipettes from 10µL to 10ml. The W3002-120A has a large, high resolution touch screen that presents the user with an icon based menu system to allow quick and intuitive access to a wide range of useful functions. A precisely engineered Electromagnetic Force Restoration (EFR) weigh cell accurately determines masses to sub milligram levels. The user interface of the AccuCheck™ software is intuitive and requires no special training to use. Individual pipette details (brand, model, serial number) can be saved in the internal data base for current and future calibrations. The software walks the user through all steps of the gravimetric method, allows input of water temperature, air temperature, pressure, and humidity. It saves the weight values, and then automatically performs all calculations for accuracy and precision at minimum, middle and maximum volume settings. The internal calibration system helps ensure that the balance is always calibrated and ready for use. Auto calibration can also be set to occur at specific time intervals depending on user preference. A high resolution thermal probe is incorporated in the core of the EFR weigh cell, and if measured temperature fluctuates slightly, the balance will automatically compensate. Offering a maximum capacity of 120g, readability of 62g x 0.01mg / 120g x 0.1mg, and automatic internal calibration, the W3002-120A balance is a favorite for labs needing fast and accurate weight determinations. The Anti Evaporation Trap greatly improves results when performing the gravimetric method by preventing unstable measurements due to evaporation loss. Removing the Anti Evaporation Trap also allows the W3002-120A balance to be used for general weighing applications. A USB port on the side accepts a flash drive for the storage of weighing data, which can then be transfered to a computer. W3002-120A has adjustable feet and a leveling bubble to ensure correct installation. (Note: For optimal weighing performance, the W3002-120A semi micro model must be installed on a suitably stable surface such as a marble slab table.) Academic, research and industrial labs require accurately calibrated pipettes to achieve meaningful results, and all mechanical pipettes require calibration on a regular basis. The W3002A-120ACS gives any lab the freedom to calibrate pipettes quickly and when required.INCLUDED: The Accuris AccuCheck Pipette Calibration System (W3002A-120 Balance with W3110 Anti Evaporation Trap) includes: - W3002A-120A Analytical Balance with built in Calibration Software - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

4 adapters 1x50ml for SIGMA 13104 / 13117 buckets For SIGMA laboratory centrifuge with rotor 11133 F (more)or 4 x 1 Falcon tube of 50ml

The New Brunswick Innova 4400 Incubator Shaker is a large-capacity environmental shaker that allows  (more)for uniform heating and motion and accurate regulation of shaking speed. This equilibration creates faster operation and allows enhanced productivity for laboratories with shaking requirements. Designed for handling greater quantities of flasks, the Innova 4400 easily holds 12 x 2 L flasks and accepts flasks up to 6 L. Temperature range: Ambient +5°C to 80°C Temperature accuracy: ±0.1°C (30°C – 40°C), ±0.5°C (for the rest) Speed range: 25 to 400 rpm Speed accuracy: ±1 rpm Orbit: 25 mm Platform: 457 x 762 mm Dimensions (WxDxH): 1270 x 838 x 686 mm| Weight: 222 kg

E2-class mass standards represent an exceptional standard of precision in mass measurement. Classed  (more)as E2 metrology class, they are characterized not only by their high accuracy, but also by their versatility for use in laboratories, industry or scientific research. Versatility of Applications Varied Standards: The set consists of 12 flat polygonal sheets and 17 cylindrical standards, providing a wide range of calibration options. High-Quality Accessories: The set also includes 2 brushes, 2 tweezers and gloves, facilitating precise and safe cleaning and handling of the standards. Elegant Packaging: The standards are delivered in an elegant wooden box, ensuring their safe storage and transportation. *The mg unit mass standards are flat polygonal sheets. **The 1 mg, 2 mg and 5 mg mass standards are made of aluminum.