General laboratory equipment - other

Motic BA310 MET-T Trinocular (Stroke 6”x 4” Stage) Motic’s BA310MET series presents a powerful micro (more)scope line for incident light applications in all material sciences. Industrial quality control of opaque samples can be performed as well as teaching in educational environments of engineering and material professions, where affordability and ease of use are key demands. Extended flexibility is given by the BA310MET-T models with built-in transmitted light for transparent or compound materials. The BA310MET-H includes a more flexible focusing device, dedicated to larger samples with little limitation in size. Motic's LM Plan-Achromatic objectives with Long-Working Distance for incident light provide optimal image contrast for reflective, non-covered specimen. Together with a fully corrected tube lens an intermediate image without colored fringes is created. In all models the Epi-Illuminator offers a powerful 50W Halogen light source. The built-in field diaphragm and aperture diaphragm help to optimize image quality by reducing stray light and thus increasing contrast.INCLUDED: The Motic BA310 MET-T Trinocular (Stroke 6”x 4” Stage) includes: - 5X/0.13 (WD 20.3mm) Objective - 10X/0.25 (WD 17.5mm) Objective - 20X/0.40 (WD 8.1mm) Objective - 50X/0.55 (WD 8.4mm) Objective - Widefield N-WF10X/20mm with Diopter Adjustment - Dust Cover - Power Cord - Allen Key - Blue, Frosted, Green and Yellow Filters - Operator's Guide Motic BA310 MET-T Trinocular (Stroke 6”x 4” Stage) SpecificationsModelBA310MET-H Trinocular (6"x4")Optical systemColour Corrected Infinity Optical System (CCIS®)Observation tubeTrinocular head, Siedentopf type, 360° SwivelingInclination30° inclinedTrinocular light split100:0/20:80Interpupillary distance48-75mmDiopter adjustmentOn both eyepieces, +/- 5 diopterEyepiecesWidefield N-WF10X/20mm with diopter adjustmentIntermediate bodyEpi-illuminator quartz halogen with integrated field and aperture diaphragms and external lamphouseNosepieceReversed quintupleObjective classificationCCIS® LM Plan Achromatic, DINObjectives5X/0.13 (WD 20.3mm), 10X/0.25 (WD 17.5mm), 20X/0.40 (WD 8.1mm), 50X/0.55 (WD 8.4mm)Objective mounting threadW 4/5"x1/36" (RMS standard)Stand typeUprightStageMechanical stage, hard coated with built-in low position coaxial stage control and glass plateStage size300x180mmTravel range X&Y150x100mm (6"x4")CondenserFocusable and centerable Abbe condenser N.A. 0.85DiaphragmIris diaphragmFocus mechanismCoaxial coarse and fine focusing system with tension adjustmentFine focus precision2μmFocusing stroke30mmUpper limit stopUpper limit stop preset but adjustableFilter holderOn top of the illuminator with fixing capIncident illuminationQuartz halogen 12V/50W with integrated field and aperture diaphragmsTransmitted illuminationKoehler Quartz halogen 6V/30W with intensity controlIllumination interchangeabilityEpi-illuminator Quartz halogen 12V/50W or LED 3W, transmitted Quartz halogen 6V/30W or LED 3WIllumination featuresExternal lamp house for Epi-illuminatorTransformerEpi-illuminator external, transmitted internalPower supply100-240V (CE)Dimensions LxWxH508x240x465mmNet weight12.7kgComparison of ModelsSpecificationMotic BA310 MET BinocularMotic BA310 MET TrinocularMotic BA310 MET-H TrinocularMotic BA310 MET-H Trinocular (Erect Image)Motic BA310 MET-T Trinocular (3"x2" Stage)Motic BA310 MET-T Trinocular (6"x4" Stage)Motic BA310 MET-T Trinocular (Erect Image)Motic BA310 MET-T Trinocular (Stroke 3”x 2” Stage) (Erect Image)Observation TubeBinocular headTrinocular headTrinocular headTrinocular head (Erect Image)Trinocular head, Siedentopf type, 360° SwivelingTrinocular head, Siedentopf type, 360° SwivelingTrinocular head, Siedentopf type, 360° SwivelingTrinocular head, Siedentopf type, 360° SwivelingInterpupillary Distance48-75mm48-75mm55-75mm55-75mm48-75mm48-75mm48-75mm48-75mmObjective ClassificationCCIS® EC Plan Achromatic, DINCCIS® EC Plan Achromatic, DINCCIS® LM Plan Achromatic, DINCCIS® LM Plan Achromatic, DINCCIS® LM Plan Achromatic, DINCCIS® LM Plan Achromatic, DINCCIS® EC Plan Achromatic, DINCCIS® LM Plan Achromatic, DINObjectives5X/0.13 (WD 20.3mm), 10X/0.25 (WD 17.5mm), 20X/0.40 (WD 8.1mm), 50X/0.55 (WD 8.4mm)5X/0.13 (WD 20.3mm), 10X/0.25 (WD 17.5mm), 20X/0.40 (WD 8.1mm), 50X/0.55 (WD 8.4mm)5X/0.13 (WD 11.5mm), 10X/0.3 (WD 6.8mm), 20X/0.40 (WD 11.1mm), 50X/0.55 (WD 8.2mm)5X/0.13 (WD 20.3mm), 10X/0.25 (WD 17.5mm), 20X/0.40 (WD 8.1mm), 50X/0.55 (WD 8.4mm)5X/0.13 (WD 20.3mm), 10X/0.25 (WD 17.5mm), 20X/0.40 (WD 8.1mm), 50X/0.55 (WD 8.4mm)5X/0.13 (WD 20.3mm), 10X/0.25 (WD 17.5mm), 20X/0.40 (WD 8.1mm), 50X/0.55 (WD 8.4mm)5X/0.13 (WD 20.3mm), 10X/0.25 (WD 17.5mm), 20X/0.40 (WD 8.1mm), 50X/0.55 (WD 8.4mm)5X/0.13 (WD 20.3mm), 10X/0.25 (WD 17.5mm), 20X/0.40 (WD 8.1mm), 50X/0.55 (WD 8.4mm)StageMechanical stage, hard coated with coaxial stage controlMechanical stage, hard coated with coaxial stage controlMechanical stage, hard coated with coaxial stage controlMechanical stage, hard coated with coaxial stage controlMechanical stage, hard coated with built-in low position coaxial stage control and glass plateMechanical stage, hard coated with built-in low position coaxial stage control and glass plateMechanical stage, hard coated with built-in low position coaxial stage controlMechanical stage, hard coated with built-in low position coaxial stage control and glass plateStage Size180x140mm180x140mm180x140mm180x140mm240x140mm300x180mm180x140mm240x140mmTravel Range X&Y75x50mm75x50mm100x80mm100x80mm75x50mm150x100mm75x50mm75x50mmIllumination InterchangeabilityQuartz halogen 12V/50W or LED 3WQuartz halogen 12V/50W or LED 3WQuartz halogen 12V/50W or LED 3WQuartz halogen 12V/50W or LED 3WEpi-illuminator Quartz halogen 12V/50W or LED 3W, transmitted Quartz halogen 6V/30W or LED 3WEpi-illuminator Quartz halogen 12V/50W or LED 3W, transmitted Quartz halogen 6V/30W or LED 3WQuartz halogen 12V/50W or LED 3WEpi-illuminator Quartz halogen 12V/50W or LED 3W, transmitted Quartz halogen 6V/30W or LED 3W.comparison-table tr td:nth-child(7) { background-color: #fffacd; }DownloadsTechnical Specification Download Operator's Manual Download

Motic BA310 MET-T Trinocular (Stroke 3”x 2” Stage) Motic’s BA310MET series presents a powerful micro (more)scope line for incident light applications in all material sciences. Industrial quality control of opaque samples can be performed as well as teaching in educational environments of engineering and material professions, where affordability and ease of use are key demands. Extended flexibility is given by the BA310MET-T models with built-in transmitted light for transparent or compound materials. The BA310MET-H includes a more flexible focusing device, dedicated to larger samples with little limitation in size. Motic's LM Plan-Achromatic objectives with Long-Working Distance for incident light provide optimal image contrast for reflective, non-covered specimen. Together with a fully corrected tube lens an intermediate image without colored fringes is created. In all models the Epi-Illuminator offers a powerful 50W Halogen light source. The built-in field diaphragm and aperture diaphragm help to optimize image quality by reducing stray light and thus increasing contrast.INCLUDED: The Motic BA310 MET-T Trinocular (Stroke 3”x 2” Stage) includes: - 5X/0.13 (WD 20.3mm) Objective - 10X/0.25 (WD 17.5mm) Objective - 20X/0.40 (WD 8.1mm) Objective - 50X/0.55 (WD 8.4mm) Objective - Widefield N-WF10X/20mm with Diopter Adjustment - Dust Cover - Power Cord - Allen Key - Blue, Frosted, Green and Yellow Filters - Operator's Guide Motic BA310 MET-T Trinocular (Stroke 3”x 2” Stage) SpecificationsOptical systemColour Corrected Infinity Optical System (CCIS®)Observation tubeTrinocular head, Siedentopf type, 360° SwivelingInclination30° inclinedTrinocular light split100:0/20:80Interpupillary distance48-75mmDiopter adjustmentOn both eyepieces, +/- 5 diopterEyepiecesWidefield N-WF10X/20mm with diopter adjustmentIntermediate bodyEpi-illuminator quartz halogen with integrated field and aperture diaphragms and external lamphouseNosepieceReversed quintupleObjective classificationCCIS® LM Plan Achromatic, DINObjectives5X/0.13 (WD 20.3mm), 10X/0.25 (WD 17.5mm), 20X/0.40 (WD 8.1mm), 50X/0.55 (WD 8.4mm)Objective mounting threadW 4/5"x1/36" (RMS standard)Stand typeUprightStageMechanical stage, hard coated with built-in low position coaxial stage control and glass plateStage size240x140mmTravel range X&Y75x50mm (3"x2")CondenserFocusable and centerable Abbe condenser N.A. 0.85DiaphragmIris diaphragmFocus mechanismCoaxial coarse and fine focusing system with tension adjustmentFine focus precision2μmFocusing stroke30mmUpper limit stopUpper limit stop preset but adjustableFilter holderOn top of the illuminator with fixing capIncident illuminationQuartz halogen 12V/50W with integrated field and aperture diaphragmsTransmitted illuminationKoehler Quartz halogen 6V/30W with intensity controlIllumination interchangeabilityEpi-illuminator Quartz halogen 12V/50W or LED 3W, transmitted Quartz halogen 6V/30W or LED 3WIllumination featuresExternal lamp house for Epi-illuminatorTransformerEpi-illuminator external, transmitted internalPower supply100-240V (CE)Dimensions LxWxH508x240x465mmNet weight12.7kgComparison of ModelsSpecificationMotic BA310 MET BinocularMotic BA310 MET TrinocularMotic BA310 MET-H TrinocularMotic BA310 MET-H Trinocular (Erect Image)Motic BA310 MET-T Trinocular (3"x2" Stage)Motic BA310 MET-T Trinocular (6"x4" Stage)Motic BA310 MET-T Trinocular (Erect Image)Motic BA310 MET-T Trinocular (Stroke 3”x 2” Stage) (Erect Image)Observation TubeBinocular headTrinocular headTrinocular headTrinocular head (Erect Image)Trinocular head, Siedentopf type, 360° SwivelingTrinocular head, Siedentopf type, 360° SwivelingTrinocular head, Siedentopf type, 360° SwivelingTrinocular head, Siedentopf type, 360° SwivelingInterpupillary Distance48-75mm48-75mm55-75mm55-75mm48-75mm48-75mm48-75mm48-75mmObjective ClassificationCCIS® EC Plan Achromatic, DINCCIS® EC Plan Achromatic, DINCCIS® LM Plan Achromatic, DINCCIS® LM Plan Achromatic, DINCCIS® LM Plan Achromatic, DINCCIS® LM Plan Achromatic, DINCCIS® EC Plan Achromatic, DINCCIS® LM Plan Achromatic, DINObjectives5X/0.13 (WD 20.3mm), 10X/0.25 (WD 17.5mm), 20X/0.40 (WD 8.1mm), 50X/0.55 (WD 8.4mm)5X/0.13 (WD 20.3mm), 10X/0.25 (WD 17.5mm), 20X/0.40 (WD 8.1mm), 50X/0.55 (WD 8.4mm)5X/0.13 (WD 11.5mm), 10X/0.3 (WD 6.8mm), 20X/0.40 (WD 11.1mm), 50X/0.55 (WD 8.2mm)5X/0.13 (WD 20.3mm), 10X/0.25 (WD 17.5mm), 20X/0.40 (WD 8.1mm), 50X/0.55 (WD 8.4mm)5X/0.13 (WD 20.3mm), 10X/0.25 (WD 17.5mm), 20X/0.40 (WD 8.1mm), 50X/0.55 (WD 8.4mm)5X/0.13 (WD 20.3mm), 10X/0.25 (WD 17.5mm), 20X/0.40 (WD 8.1mm), 50X/0.55 (WD 8.4mm)5X/0.13 (WD 20.3mm), 10X/0.25 (WD 17.5mm), 20X/0.40 (WD 8.1mm), 50X/0.55 (WD 8.4mm)5X/0.13 (WD 20.3mm), 10X/0.25 (WD 17.5mm), 20X/0.40 (WD 8.1mm), 50X/0.55 (WD 8.4mm)StageMechanical stage, hard coated with coaxial stage controlMechanical stage, hard coated with coaxial stage controlMechanical stage, hard coated with coaxial stage controlMechanical stage, hard coated with coaxial stage controlMechanical stage, hard coated with built-in low position coaxial stage control and glass plateMechanical stage, hard coated with built-in low position coaxial stage control and glass plateMechanical stage, hard coated with built-in low position coaxial stage controlMechanical stage, hard coated with built-in low position coaxial stage control and glass plateStage Size180x140mm180x140mm180x140mm180x140mm240x140mm300x180mm180x140mm240x140mmTravel Range X&Y75x50mm75x50mm100x80mm100x80mm75x50mm150x100mm75x50mm75x50mmIllumination InterchangeabilityQuartz halogen 12V/50W or LED 3WQuartz halogen 12V/50W or LED 3WQuartz halogen 12V/50W or LED 3WQuartz halogen 12V/50W or LED 3WEpi-illuminator Quartz halogen 12V/50W or LED 3W, transmitted Quartz halogen 6V/30W or LED 3WEpi-illuminator Quartz halogen 12V/50W or LED 3W, transmitted Quartz halogen 6V/30W or LED 3WQuartz halogen 12V/50W or LED 3WEpi-illuminator Quartz halogen 12V/50W or LED 3W, transmitted Quartz halogen 6V/30W or LED 3W.comparison-table tr td:nth-child(6) { background-color: #fffacd; }DownloadsTechnical Specification Download Operator's Manual Download

Motic BA310 MET-H Trinocular (Erect Image) Motic’s BA310MET series presents a powerful microscope li (more)ne for incident light applications in all material sciences. Industrial quality control of opaque samples can be performed as well as teaching in educational environments of engineering and material professions, where affordability and ease of use are key demands. Extended flexibility is given by the BA310MET-T models with built-in transmitted light for transparent or compound materials. The BA310MET-H includes a more flexible focusing device, dedicated to larger samples with little limitation in size. Motic's LM Plan-Achromatic objectives with Long-Working Distance for incident light provide optimal image contrast for reflective, non-covered specimen. Together with a fully corrected tube lens an intermediate image without colored fringes is created. In all models the Epi-Illuminator offers a powerful 50W Halogen light source. The built-in field diaphragm and aperture diaphragm help to optimize image quality by reducing stray light and thus increasing contrast.INCLUDED: The Motic BA310 MET-H Trinocular (Erect Image) includes: - 5X/0.13 (WD 20.3mm) Objective - 10X/0.25 (WD 17.5mm) Objective - 20X/0.40 (WD 8.1mm) Objective - 50X/0.55 (WD 8.4mm) Objective - Widefield N-WF10X/22mm with Diopter Adjustment - Dust Cover - Power Cord - Allen Key - Operator's Guide Motic BA310 MET-H Trinocular (Erect Image) SpecificationsOptical systemColour Corrected Infinity Optical System (CCIS®)Observation tubeTrinocular head, Siedentopf typeInclination30° inclinedTrinocular light splitFixed 50:50 erect imageInterpupillary distance55-75mmDiopter adjustmentOn both eyepieces, +/- 5 diopterEyepiecesWidefield N-WF10X/20mm with diopter adjustmentIntermediate bodyEpi-illuminator quartz halogen with integrated field and aperture diaphragms and external lamphouseNosepieceSide facing quintupleObjective classificationCCIS® LM Plan Achromatic, DINObjectives5X/0.13 (WD 20.3mm), 10X/0.25 (WD 17.5mm), 20X/0.40 (WD 8.1mm), 50X/0.55 (WD 8.4mm)Objective mounting threadW 4/5"x1/36" (RMS standard)Stand typeUpright with pole stand with focusing block and baseStageMechanical stage, hard coated with coaxial stage controlStage size180x140mmTravel range X&Y100x80mmFocus mechanismCoaxial coarse and fine focusing system with tension adjustmentFine focus precision2μmFocusing stroke30mmIncident illuminationQuartz halogen 12V/50W with integrated field and aperture diaphragmsIllumination interchangeabilityQuartz halogen 12V/50W or LED 3WIllumination featuresExternal lamp house for Epi-illuminatorTransformerExternalPower supply100-240V (CE)Dimensions LxWxH369x485x391mmBase300x300mmNet weight15.7kgComparison of ModelsSpecificationMotic BA310 MET BinocularMotic BA310 MET TrinocularMotic BA310 MET-H TrinocularMotic BA310 MET-H Trinocular (Erect Image)Motic BA310 MET-T Trinocular (3"x2" Stage)Motic BA310 MET-T Trinocular (6"x4" Stage)Motic BA310 MET-T Trinocular (Erect Image)Motic BA310 MET-T Trinocular (Stroke 3”x 2” Stage) (Erect Image)Observation TubeBinocular headTrinocular headTrinocular headTrinocular head (Erect Image)Trinocular head, Siedentopf type, 360° SwivelingTrinocular head, Siedentopf type, 360° SwivelingTrinocular head, Siedentopf type, 360° SwivelingTrinocular head, Siedentopf type, 360° SwivelingInterpupillary Distance48-75mm48-75mm55-75mm55-75mm48-75mm48-75mm48-75mm48-75mmObjective ClassificationCCIS® EC Plan Achromatic, DINCCIS® EC Plan Achromatic, DINCCIS® LM Plan Achromatic, DINCCIS® LM Plan Achromatic, DINCCIS® LM Plan Achromatic, DINCCIS® LM Plan Achromatic, DINCCIS® EC Plan Achromatic, DINCCIS® LM Plan Achromatic, DINObjectives5X/0.13 (WD 20.3mm), 10X/0.25 (WD 17.5mm), 20X/0.40 (WD 8.1mm), 50X/0.55 (WD 8.4mm)5X/0.13 (WD 20.3mm), 10X/0.25 (WD 17.5mm), 20X/0.40 (WD 8.1mm), 50X/0.55 (WD 8.4mm)5X/0.13 (WD 11.5mm), 10X/0.3 (WD 6.8mm), 20X/0.40 (WD 11.1mm), 50X/0.55 (WD 8.2mm)5X/0.13 (WD 20.3mm), 10X/0.25 (WD 17.5mm), 20X/0.40 (WD 8.1mm), 50X/0.55 (WD 8.4mm)5X/0.13 (WD 20.3mm), 10X/0.25 (WD 17.5mm), 20X/0.40 (WD 8.1mm), 50X/0.55 (WD 8.4mm)5X/0.13 (WD 20.3mm), 10X/0.25 (WD 17.5mm), 20X/0.40 (WD 8.1mm), 50X/0.55 (WD 8.4mm)5X/0.13 (WD 20.3mm), 10X/0.25 (WD 17.5mm), 20X/0.40 (WD 8.1mm), 50X/0.55 (WD 8.4mm)5X/0.13 (WD 20.3mm), 10X/0.25 (WD 17.5mm), 20X/0.40 (WD 8.1mm), 50X/0.55 (WD 8.4mm)StageMechanical stage, hard coated with coaxial stage controlMechanical stage, hard coated with coaxial stage controlMechanical stage, hard coated with coaxial stage controlMechanical stage, hard coated with coaxial stage controlMechanical stage, hard coated with built-in low position coaxial stage control and glass plateMechanical stage, hard coated with built-in low position coaxial stage control and glass plateMechanical stage, hard coated with built-in low position coaxial stage controlMechanical stage, hard coated with built-in low position coaxial stage control and glass plateStage Size180x140mm180x140mm180x140mm180x140mm240x140mm300x180mm180x140mm240x140mmTravel Range X&Y75x50mm75x50mm100x80mm100x80mm75x50mm150x100mm75x50mm75x50mmIllumination InterchangeabilityQuartz halogen 12V/50W or LED 3WQuartz halogen 12V/50W or LED 3WQuartz halogen 12V/50W or LED 3WQuartz halogen 12V/50W or LED 3WEpi-illuminator Quartz halogen 12V/50W or LED 3W, transmitted Quartz halogen 6V/30W or LED 3WEpi-illuminator Quartz halogen 12V/50W or LED 3W, transmitted Quartz halogen 6V/30W or LED 3WQuartz halogen 12V/50W or LED 3WEpi-illuminator Quartz halogen 12V/50W or LED 3W, transmitted Quartz halogen 6V/30W or LED 3W.comparison-table tr td:nth-child(5) { background-color: #fffacd; }DownloadsTechnical Specification Download Operator's Manual Download

Motic BA310 MET-H Trinocular Motic’s BA310MET series presents a powerful microscope line for inciden (more)t light applications in all material sciences. Industrial quality control of opaque samples can be performed as well as teaching in educational environments of engineering and material professions, where affordability and ease of use are key demands. Extended flexibility is given by the BA310MET-T models with built-in transmitted light for transparent or compound materials. The BA310MET-H includes a more flexible focusing device, dedicated to larger samples with little limitation in size. Motic's LM Plan-Achromatic objectives with Long-Working Distance for incident light provide optimal image contrast for reflective, non-covered specimen. Together with a fully corrected tube lens an intermediate image without colored fringes is created. In all models the Epi-Illuminator offers a powerful 50W Halogen light source. The built-in field diaphragm and aperture diaphragm help to optimize image quality by reducing stray light and thus increasing contrast.INCLUDED: The Motic BA310 MET-H Trinocular includes: - 5X/0.13 (WD 11.5mm) Objective - 10X/0.3 (WD 6.8mm) Objective - 20X/0.40 (WD 11.1mm) Objective - 50X/0.55 (WD 8.2mm) Objective - Widefield N-WF10X/22mm with Diopter Adjustment - Dust Cover - Power Cord - Allen Key - Operator's Guide Motic BA310 MET-H Trinocular SpecificationsOptical systemColour Corrected Infinity Optical System (CCIS®)Observation tubeTrinocular head, Siedentopf typeInclination30° inclinedTrinocular light split100:0/20:80Interpupillary distance55-75mmDiopter adjustmentOn both eyepieces, +/- 5 diopterEyepiecesWidefield N-WF10X/20mm with diopter adjustmentIntermediate bodyEpi-illuminator quartz halogen with integrated field and aperture diaphragms and external lamphouseNosepieceReversed quintupleObjective classificationCCIS® LM Plan Achromatic, DINObjectives5X/0.13 (WD 11.5mm), 10X/0.3 (WD 6.8mm), 20X/0.40 (WD 11.1mm), 50X/0.55 (WD 8.2mm)Objective mounting threadW 4/5"x1/36" (RMS standard)Stand typeUpright with pole stand with focusing block and baseStageMechanical stage, hard coated with coaxial stage controlStage size180x140mmTravel range X&Y100x80mmFocus mechanismCoaxial coarse and fine focusing system with tension adjustmentFine focus precision2μmFocusing stroke30mmIncident illuminationQuartz halogen 12V/50W with integrated field and aperture diaphragmsIllumination interchangeabilityQuartz halogen 12V/50W or LED 3WIllumination featuresExternal lamp house for Epi-illuminatorTransformerExternalPower supply100-240V (CE)Dimensions LxWxH369x485x391mmBase300x300mmNet weight15.7kgComparison of ModelsSpecificationMotic BA310 MET BinocularMotic BA310 MET TrinocularMotic BA310 MET-H TrinocularMotic BA310 MET-H Trinocular (Erect Image)Motic BA310 MET-T Trinocular (3"x2" Stage)Motic BA310 MET-T Trinocular (6"x4" Stage)Motic BA310 MET-T Trinocular (Erect Image)Motic BA310 MET-T Trinocular (Stroke 3”x 2” Stage) (Erect Image)Observation TubeBinocular headTrinocular headTrinocular headTrinocular head (Erect Image)Trinocular head, Siedentopf type, 360° SwivelingTrinocular head, Siedentopf type, 360° SwivelingTrinocular head, Siedentopf type, 360° SwivelingTrinocular head, Siedentopf type, 360° SwivelingInterpupillary Distance48-75mm48-75mm55-75mm55-75mm48-75mm48-75mm48-75mm48-75mmObjective ClassificationCCIS® EC Plan Achromatic, DINCCIS® EC Plan Achromatic, DINCCIS® LM Plan Achromatic, DINCCIS® LM Plan Achromatic, DINCCIS® LM Plan Achromatic, DINCCIS® LM Plan Achromatic, DINCCIS® EC Plan Achromatic, DINCCIS® LM Plan Achromatic, DINObjectives5X/0.13 (WD 20.3mm), 10X/0.25 (WD 17.5mm), 20X/0.40 (WD 8.1mm), 50X/0.55 (WD 8.4mm)5X/0.13 (WD 20.3mm), 10X/0.25 (WD 17.5mm), 20X/0.40 (WD 8.1mm), 50X/0.55 (WD 8.4mm)5X/0.13 (WD 11.5mm), 10X/0.3 (WD 6.8mm), 20X/0.40 (WD 11.1mm), 50X/0.55 (WD 8.2mm)5X/0.13 (WD 20.3mm), 10X/0.25 (WD 17.5mm), 20X/0.40 (WD 8.1mm), 50X/0.55 (WD 8.4mm)5X/0.13 (WD 20.3mm), 10X/0.25 (WD 17.5mm), 20X/0.40 (WD 8.1mm), 50X/0.55 (WD 8.4mm)5X/0.13 (WD 20.3mm), 10X/0.25 (WD 17.5mm), 20X/0.40 (WD 8.1mm), 50X/0.55 (WD 8.4mm)5X/0.13 (WD 20.3mm), 10X/0.25 (WD 17.5mm), 20X/0.40 (WD 8.1mm), 50X/0.55 (WD 8.4mm)5X/0.13 (WD 20.3mm), 10X/0.25 (WD 17.5mm), 20X/0.40 (WD 8.1mm), 50X/0.55 (WD 8.4mm)StageMechanical stage, hard coated with coaxial stage controlMechanical stage, hard coated with coaxial stage controlMechanical stage, hard coated with coaxial stage controlMechanical stage, hard coated with coaxial stage controlMechanical stage, hard coated with built-in low position coaxial stage control and glass plateMechanical stage, hard coated with built-in low position coaxial stage control and glass plateMechanical stage, hard coated with built-in low position coaxial stage controlMechanical stage, hard coated with built-in low position coaxial stage control and glass plateStage Size180x140mm180x140mm180x140mm180x140mm240x140mm300x180mm180x140mm240x140mmTravel Range X&Y75x50mm75x50mm100x80mm100x80mm75x50mm150x100mm75x50mm75x50mmIllumination InterchangeabilityQuartz halogen 12V/50W or LED 3WQuartz halogen 12V/50W or LED 3WQuartz halogen 12V/50W or LED 3WQuartz halogen 12V/50W or LED 3WEpi-illuminator Quartz halogen 12V/50W or LED 3W, transmitted Quartz halogen 6V/30W or LED 3WEpi-illuminator Quartz halogen 12V/50W or LED 3W, transmitted Quartz halogen 6V/30W or LED 3WQuartz halogen 12V/50W or LED 3WEpi-illuminator Quartz halogen 12V/50W or LED 3W, transmitted Quartz halogen 6V/30W or LED 3W.comparison-table tr td:nth-child(4) { background-color: #fffacd; }DownloadsTechnical Specification Download Operator's Manual Download

Motic BA310 MET Trinocular Motic’s BA310MET series presents a powerful microscope line for incident  (more)light applications in all material sciences. Industrial quality control of opaque samples can be performed as well as teaching in educational environments of engineering and material professions, where affordability and ease of use are key demands. Extended flexibility is given by the BA310MET-T models with built-in transmitted light for transparent or compound materials. The BA310MET-H includes a more flexible focusing device, dedicated to larger samples with little limitation in size. Motic's LM Plan-Achromatic objectives with Long-Working Distance for incident light provide optimal image contrast for reflective, non-covered specimen. Together with a fully corrected tube lens an intermediate image without colored fringes is created. In all models the Epi-Illuminator offers a powerful 50W Halogen light source. The built-in field diaphragm and aperture diaphragm help to optimize image quality by reducing stray light and thus increasing contrast.INCLUDED: The Motic BA310 MET Trinocular includes: - 5X/0.13 (WD 20.3mm) Objective - 10X/0.25 (WD 17.5mm) Objective - 20X/0.40 (WD 8.1mm) Objective - 50X/0.55 (WD 8.4mm) Objective - Widefield UC-WF10X/22mm with Diopter Adjustment - Dust Cover - Power Cord - Allen Key - Operator's Guide Motic BA310 MET Trinocular SpecificationsObservation tubeTrinocular head, Siedentopf type, 360° swivelingOptical systemColour Corrected Infinity Optical System (CCIS®)Diopter adjustmentOn both eyepieces, +/- 5 diopterEyepiecesWidefield N-WF10X/20mm with diopter adjustmentFine focus precision2µmFocus mechanismCoaxial coarse and fine focusing system with tension adjustmentFocusing stroke30mmIllumination featuresExternal lamp house for Epi-illuminatorIllumination interchangeabilityQuartz halogen 12V/50W or LED 3WIncident illuminationQuartz halogen 12V/50W with integrated field and aperture diaphragmsInclination30° inclinedInterpupillary distance48-75mmNosepieceReversed quintupleObjective classificationCCIS® EC Plan Achromatic, DINObjective mounting threadW 4/5"x1/36" (RMS standard)PolarizationOptional slidersStageMechanical stage, hard coated with built-in low position coaxial stage controlStage size180x140mmStand typeUprightStandard contrast techniqueBrightfieldTravel range X&Y75x50mmUpper limit stopUpper limit stop preset but adjustableTransformerExternalPower supply100-240V (CE)Accessories includedDust cover, power cord, Allen keyDimensions LxWxH508x240x465mmWeight Net12.7kgComparison of ModelsSpecificationMotic BA310 MET BinocularMotic BA310 MET TrinocularMotic BA310 MET-H TrinocularMotic BA310 MET-H Trinocular (Erect Image)Motic BA310 MET-T Trinocular (3"x2" Stage)Motic BA310 MET-T Trinocular (6"x4" Stage)Motic BA310 MET-T Trinocular (Erect Image)Motic BA310 MET-T Trinocular (Stroke 3”x 2” Stage) (Erect Image)Observation TubeBinocular headTrinocular headTrinocular headTrinocular head (Erect Image)Trinocular head, Siedentopf type, 360° SwivelingTrinocular head, Siedentopf type, 360° SwivelingTrinocular head, Siedentopf type, 360° SwivelingTrinocular head, Siedentopf type, 360° SwivelingInterpupillary Distance48-75mm48-75mm55-75mm55-75mm48-75mm48-75mm48-75mm48-75mmObjective ClassificationCCIS® EC Plan Achromatic, DINCCIS® EC Plan Achromatic, DINCCIS® LM Plan Achromatic, DINCCIS® LM Plan Achromatic, DINCCIS® LM Plan Achromatic, DINCCIS® LM Plan Achromatic, DINCCIS® EC Plan Achromatic, DINCCIS® LM Plan Achromatic, DINObjectives5X/0.13 (WD 20.3mm), 10X/0.25 (WD 17.5mm), 20X/0.40 (WD 8.1mm), 50X/0.55 (WD 8.4mm)5X/0.13 (WD 20.3mm), 10X/0.25 (WD 17.5mm), 20X/0.40 (WD 8.1mm), 50X/0.55 (WD 8.4mm)5X/0.13 (WD 11.5mm), 10X/0.3 (WD 6.8mm), 20X/0.40 (WD 11.1mm), 50X/0.55 (WD 8.2mm)5X/0.13 (WD 20.3mm), 10X/0.25 (WD 17.5mm), 20X/0.40 (WD 8.1mm), 50X/0.55 (WD 8.4mm)5X/0.13 (WD 20.3mm), 10X/0.25 (WD 17.5mm), 20X/0.40 (WD 8.1mm), 50X/0.55 (WD 8.4mm)5X/0.13 (WD 20.3mm), 10X/0.25 (WD 17.5mm), 20X/0.40 (WD 8.1mm), 50X/0.55 (WD 8.4mm)5X/0.13 (WD 20.3mm), 10X/0.25 (WD 17.5mm), 20X/0.40 (WD 8.1mm), 50X/0.55 (WD 8.4mm)5X/0.13 (WD 20.3mm), 10X/0.25 (WD 17.5mm), 20X/0.40 (WD 8.1mm), 50X/0.55 (WD 8.4mm)StageMechanical stage, hard coated with coaxial stage controlMechanical stage, hard coated with coaxial stage controlMechanical stage, hard coated with coaxial stage controlMechanical stage, hard coated with coaxial stage controlMechanical stage, hard coated with built-in low position coaxial stage control and glass plateMechanical stage, hard coated with built-in low position coaxial stage control and glass plateMechanical stage, hard coated with built-in low position coaxial stage controlMechanical stage, hard coated with built-in low position coaxial stage control and glass plateStage Size180x140mm180x140mm180x140mm180x140mm240x140mm300x180mm180x140mm240x140mmTravel Range X&Y75x50mm75x50mm100x80mm100x80mm75x50mm150x100mm75x50mm75x50mmIllumination InterchangeabilityQuartz halogen 12V/50W or LED 3WQuartz halogen 12V/50W or LED 3WQuartz halogen 12V/50W or LED 3WQuartz halogen 12V/50W or LED 3WEpi-illuminator Quartz halogen 12V/50W or LED 3W, transmitted Quartz halogen 6V/30W or LED 3WEpi-illuminator Quartz halogen 12V/50W or LED 3W, transmitted Quartz halogen 6V/30W or LED 3WQuartz halogen 12V/50W or LED 3WEpi-illuminator Quartz halogen 12V/50W or LED 3W, transmitted Quartz halogen 6V/30W or LED 3W.comparison-table tr td:nth-child(3) { background-color: #fffacd; }DownloadsTechnical Specification Download Operator's Manual Download

Motic BA310 MET Binocular Motic’s BA310MET series presents a powerful microscope line for incident l (more)ight applications in all material sciences. Industrial quality control of opaque samples can be performed as well as teaching in educational environments of engineering and material professions, where affordability and ease of use are key demands. Extended flexibility is given by the BA310MET-T models with built-in transmitted light for transparent or compound materials. The BA310MET-H includes a more flexible focusing device, dedicated to larger samples with little limitation in size. Motic's LM Plan-Achromatic objectives with Long-Working Distance for incident light provide optimal image contrast for reflective, non-covered specimen. Together with a fully corrected tube lens an intermediate image without colored fringes is created. In all models the Epi-Illuminator offers a powerful 50W Halogen light source. The built-in field diaphragm and aperture diaphragm help to optimize image quality by reducing stray light and thus increasing contrast.INCLUDED: The Motic BA310 MET Binocular includes: - 5X/0.13 (WD 20.3mm) Objective - 10X/0.25 (WD 17.5mm) Objective - 20X/0.40 (WD 8.1mm) Objective - 50X/0.55 (WD 8.4mm) Objective - Widefield UC-WF10X/22mm with Diopter Adjustment - Dust Cover - Power Cord - Allen Key - Operator's Guide Motic BA310 MET Binocular SpecificationsObservation tubeBinocular head, Siedentopf type, 360° swivelingOptical systemColour Corrected Infinity Optical System (CCIS®)Diopter adjustmentOn both eyepieces, +/- 5 diopterEyepiecesWidefield N-WF10X/20mm with diopter adjustmentFine focus precision2µmFocus mechanismCoaxial coarse and fine focusing system with tension adjustmentFocusing stroke30mmIllumination featuresExternal lamp house for Epi-illuminatorIllumination interchangeabilityQuartz halogen 12V/50W or LED 3WIncident illuminationQuartz halogen 12V/50W with integrated field and aperture diaphragmsInclination30° inclinedInterpupillary distance48-75mmNosepieceReversed quintupleObjective classificationCCIS® EC Plan Achromatic, DINObjective mounting threadW 4/5"x1/36" (RMS standard)Objectives5X/0.13 (WD 20.3mm), 10X/0.25 (WD 17.5mm), 20X/0.40 (WD 8.1mm), 50X/0.55 (WD 8.4mm)PolarizationOptional slidersStageMechanical stage, hard coated with built-in low position coaxial stage controlStage size180x140mmStand typeUprightStandard contrast techniqueBrightfieldTravel range X&Y75x50mmUpper limit stopUpper limit stop preset but adjustableTransformerExternalPower supply100-240V (CE)Dimensions LxWxH508x240x465mmWeight Net12.5kgComparison of ModelsSpecificationMotic BA310 MET BinocularMotic BA310 MET TrinocularMotic BA310 MET-H TrinocularMotic BA310 MET-H Trinocular (Erect Image)Motic BA310 MET-T Trinocular (3"x2" Stage)Motic BA310 MET-T Trinocular (6"x4" Stage)Motic BA310 MET-T Trinocular (Erect Image)Motic BA310 MET-T Trinocular (Stroke 3”x 2” Stage) (Erect Image)Observation TubeBinocular headTrinocular headTrinocular headTrinocular head (Erect Image)Trinocular head, Siedentopf type, 360° SwivelingTrinocular head, Siedentopf type, 360° SwivelingTrinocular head, Siedentopf type, 360° SwivelingTrinocular head, Siedentopf type, 360° SwivelingInterpupillary Distance48-75mm48-75mm55-75mm55-75mm48-75mm48-75mm48-75mm48-75mmObjective ClassificationCCIS® EC Plan Achromatic, DINCCIS® EC Plan Achromatic, DINCCIS® LM Plan Achromatic, DINCCIS® LM Plan Achromatic, DINCCIS® LM Plan Achromatic, DINCCIS® LM Plan Achromatic, DINCCIS® EC Plan Achromatic, DINCCIS® LM Plan Achromatic, DINObjectives5X/0.13 (WD 20.3mm), 10X/0.25 (WD 17.5mm), 20X/0.40 (WD 8.1mm), 50X/0.55 (WD 8.4mm)5X/0.13 (WD 20.3mm), 10X/0.25 (WD 17.5mm), 20X/0.40 (WD 8.1mm), 50X/0.55 (WD 8.4mm)5X/0.13 (WD 11.5mm), 10X/0.3 (WD 6.8mm), 20X/0.40 (WD 11.1mm), 50X/0.55 (WD 8.2mm)5X/0.13 (WD 20.3mm), 10X/0.25 (WD 17.5mm), 20X/0.40 (WD 8.1mm), 50X/0.55 (WD 8.4mm)5X/0.13 (WD 20.3mm), 10X/0.25 (WD 17.5mm), 20X/0.40 (WD 8.1mm), 50X/0.55 (WD 8.4mm)5X/0.13 (WD 20.3mm), 10X/0.25 (WD 17.5mm), 20X/0.40 (WD 8.1mm), 50X/0.55 (WD 8.4mm)5X/0.13 (WD 20.3mm), 10X/0.25 (WD 17.5mm), 20X/0.40 (WD 8.1mm), 50X/0.55 (WD 8.4mm)5X/0.13 (WD 20.3mm), 10X/0.25 (WD 17.5mm), 20X/0.40 (WD 8.1mm), 50X/0.55 (WD 8.4mm)StageMechanical stage, hard coated with coaxial stage controlMechanical stage, hard coated with coaxial stage controlMechanical stage, hard coated with coaxial stage controlMechanical stage, hard coated with coaxial stage controlMechanical stage, hard coated with built-in low position coaxial stage control and glass plateMechanical stage, hard coated with built-in low position coaxial stage control and glass plateMechanical stage, hard coated with built-in low position coaxial stage controlMechanical stage, hard coated with built-in low position coaxial stage control and glass plateStage Size180x140mm180x140mm180x140mm180x140mm240x140mm300x180mm180x140mm240x140mmTravel Range X&Y75x50mm75x50mm100x80mm100x80mm75x50mm150x100mm75x50mm75x50mmIllumination InterchangeabilityQuartz halogen 12V/50W or LED 3WQuartz halogen 12V/50W or LED 3WQuartz halogen 12V/50W or LED 3WQuartz halogen 12V/50W or LED 3WEpi-illuminator Quartz halogen 12V/50W or LED 3W, transmitted Quartz halogen 6V/30W or LED 3WEpi-illuminator Quartz halogen 12V/50W or LED 3W, transmitted Quartz halogen 6V/30W or LED 3WQuartz halogen 12V/50W or LED 3WEpi-illuminator Quartz halogen 12V/50W or LED 3W, transmitted Quartz halogen 6V/30W or LED 3W.comparison-table tr td:nth-child(2) { background-color: #fffacd; }DownloadsTechnical Specification Download Operator's Manual Download

Motic 32 Student License w/ 2 Routers and Network Switch for MoticNet Software MoticNet offers the t (more)eacher a live overview for each student Digital Microscope Station. This overview can be extended to cover up to 32 individual microscopes with wifi cameras/tablets, so that even larger classes can be managed by a single teacher with ease. Knowing instantly what is going on at each station, the teacher can focus on presenting the actual teaching material. Additionally, the work at one student's station can also be shared with the entire classroom. This product provides licensing for 32 students, and includes two factory configured routers for use of MoticNet. INCLUDED: The Motic 32 Student License w/ 2 Routers and Network Switch for MoticNet Software includes: - 32 MoticNet Student Licenses - 2 Factory Configured Routers - Manufacturer's Documentation - 5 Year Manufacturer's Warranty

Labconco 9000720 WaterPro PS/UF Life Science Model Polishing Station, 115V, 60Hz Features - Timed  (more)dispense for unattended operation - Automatic/intermittent recirculation through polishing loop to maintain water quality, minimize bacterial growth and reduce rinse up time - Attractive and corrosion-resistant Type 304 stainless steel front panel - Unpigmented virgin natural polypropylene bowls have no impurities to contaminate water. - Water quality alert. LED flashes the actual megohm-cm when water quality falls below set point. - Built-in dispensing center - Quiet 1/4 hp motor and rotary vane recirculation pump - Dispensing valve - Wall mountable - TOC dump valve allows a small portion of purified water to drain during automatic recirculation to maintain low TOC levels (Analytical Instrument and Hybrid models). - UV flush valve allows a small portion of the purified water to rinse the ultrafilter during automatic recirculation to extend the life of the ultrafilter (Life Science and Hybrid models). - ETL listed (115 volt models) - CE Conformity (230 volt models WaterPro PS Polishing Stations deliver Type I, 18.2 megohm-cm water from the dispensing valve or optional dispensing gun at a typical rate of 1.8 liters per minute depending on feedwater flow rate and pressure, and installed purification modules.The control panel includes a timed dispense feature that allows unattended dispensing of pure water without risk of overfilling. The dispenser shuts off automatically once user-set time has elapsed. Labconco has designed WaterPro PS Stations with the right combinations of purification technologies to meet your needs. Choose from specialized stations for general chemistry, analytical, life science or combination usage. In addition, models designed for general chemistry may be upgraded with additional purification modules at a later time for use in analytical or life science applications.Click Here to View Product Video INCLUDED: The Labconco 9000720 WaterPro PS/UF Life Science Model Polishing Station, 115V, 60Hz includes: - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Labconco 9000621 WaterPro PS/HPLC Pistol Polishing Station, 115V, 60HzFeatures - Timed dispense for (more) unattended operation - Automatic/intermittent recirculation through polishing loop to maintain water quality, minimize bacterial growth and reduce rinse up time - Attractive and corrosion-resistant Type 304 stainless steel front panel - Unpigmented virgin natural polypropylene bowls have no impurities to contaminate water. - Water quality alert. LED flashes the actual megohm-cm when water quality falls below set point. - Built-in dispensing center - Quiet 1/4 hp motor and rotary vane recirculation pump - Dispensing valve - Wall mountable - TOC dump valve allows a small portion of purified water to drain during automatic recirculation to maintain low TOC levels (Analytical Instrument and Hybrid models). - UV flush valve allows a small portion of the purified water to rinse the ultrafilter during automatic recirculation to extend the life of the ultrafilter (Life Science and Hybrid models). - ETL listed (115 volt models) - CE Conformity (230 volt models WaterPro PS Polishing Stations deliver Type I, 18.2 megohm-cm water from the dispensing valve or optional dispensing gun at a typical rate of 1.8 liters per minute depending on feedwater flow rate and pressure, and installed purification modules.The control panel includes a timed dispense feature that allows unattended dispensing of pure water without risk of overfilling. The dispenser shuts off automatically once user-set time has elapsed. Labconco has designed WaterPro PS Stations with the right combinations of purification technologies to meet your needs. Choose from specialized stations for general chemistry, analytical, life science or combination usage. In addition, models designed for general chemistry may be upgraded with additional purification modules at a later time for use in analytical or life science applications.Click Here to View Product Video INCLUDED: The Labconco 9000621 WaterPro PS/HPLC Pistol Polishing Station, 115V, 60Hz includes: - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Labconco 9000620 WaterPro PS/HPLC Polishing Station, 115V, 60HzFeatures - Timed dispense for unatte (more)nded operation - Automatic/intermittent recirculation through polishing loop to maintain water quality, minimize bacterial growth and reduce rinse up time - Attractive and corrosion-resistant Type 304 stainless steel front panel - Unpigmented virgin natural polypropylene bowls have no impurities to contaminate water. - Water quality alert. LED flashes the actual megohm-cm when water quality falls below set point. - Built-in dispensing center - Quiet 1/4 hp motor and rotary vane recirculation pump - Dispensing valve - Wall mountable - TOC dump valve allows a small portion of purified water to drain during automatic recirculation to maintain low TOC levels (Analytical Instrument and Hybrid models). - UV flush valve allows a small portion of the purified water to rinse the ultrafilter during automatic recirculation to extend the life of the ultrafilter (Life Science and Hybrid models). - ETL listed (115 volt models) - CE Conformity (230 volt models WaterPro PS Polishing Stations deliver Type I, 18.2 megohm-cm water from the dispensing valve or optional dispensing gun at a typical rate of 1.8 liters per minute depending on feedwater flow rate and pressure, and installed purification modules.The control panel includes a timed dispense feature that allows unattended dispensing of pure water without risk of overfilling. The dispenser shuts off automatically once user-set time has elapsed. Labconco has designed WaterPro PS Stations with the right combinations of purification technologies to meet your needs. Choose from specialized stations for general chemistry, analytical, life science or combination usage. In addition, models designed for general chemistry may be upgraded with additional purification modules at a later time for use in analytical or life science applications.Click Here to View Product Video INCLUDED: The Labconco 9000620 WaterPro PS/HPLC Polishing Station, 115V, 60Hz includes: - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Labconco 9000722 WaterPro PS HPLC/UF Hybrid Polishing Station with Dispensing Gun, 115V, 60Hz Featur (more)es - Timed dispense for unattended operation - Automatic/intermittent recirculation through polishing loop to maintain water quality, minimize bacterial growth and reduce rinse up time - Attractive and corrosion-resistant Type 304 stainless steel front panel - Unpigmented virgin natural polypropylene bowls have no impurities to contaminate water. - Water quality alert. LED flashes the actual megohm-cm when water quality falls below set point. - Built-in dispensing center - Quiet 1/4 hp motor and rotary vane recirculation pump - Dispensing valve - Wall mountable - TOC dump valve allows a small portion of purified water to drain during automatic recirculation to maintain low TOC levels (Analytical Instrument and Hybrid models). - UV flush valve allows a small portion of the purified water to rinse the ultrafilter during automatic recirculation to extend the life of the ultrafilter (Life Science and Hybrid models). - ETL listed (115 volt models) WaterPro PS Polishing Stations deliver Type I, 18.2 megohm-cm water from the dispensing valve or optional dispensing gun at a typical rate of 1.8 liters per minute depending on feedwater flow rate and pressure, and installed purification modules.The control panel includes a timed dispense feature that allows unattended dispensing of pure water without risk of overfilling. The dispenser shuts off automatically once user-set time has elapsed. Labconco has designed WaterPro PS Stations with the right combinations of purification technologies to meet your needs. Choose from specialized stations for general chemistry, analytical, life science or combination usage. In addition, models designed for general chemistry may be upgraded with additional purification modules at a later time for use in analytical or life science applications.Click Here to View Product Video INCLUDED: The Labconco 9000722 WaterPro PS HPLC/UF Hybrid Polishing Station, 115V, 60Hz includes: - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Labconco 9000521 WaterPro PS Pistol Polishing Station, 115V, 60HzFeatures - Timed dispense for unat (more)tended operation - Automatic/intermittent recirculation through polishing loop to maintain water quality, minimize bacterial growth and reduce rinse up time - Dispensing gun for additional flexability - Attractive and corrosion-resistant Type 304 stainless steel front panel - Unpigmented virgin natural polypropylene bowls have no impurities to contaminate water. - Water quality alert. LED flashes the actual megohm-cm when water quality falls below set point. - Built-in dispensing center - Quiet 1/4 hp motor and rotary vane recirculation pump - Dispensing valve - Wall mountable - TOC dump valve allows a small portion of purified water to drain during automatic recirculation to maintain low TOC levels (Analytical Instrument and Hybrid models). - UV flush valve allows a small portion of the purified water to rinse the ultrafilter during automatic recirculation to extend the life of the ultrafilter (Life Science and Hybrid models). - ETL listed (115 volt models) - CE Conformity (230 volt models WaterPro PS Polishing Stations deliver Type I, 18.2 megohm-cm water from the dispensing gun at a typical rate of 1.8 liters per minute depending on feedwater flow rate and pressure, and installed purification modules.The control panel includes a timed dispense feature that allows unattended dispensing of pure water without risk of overfilling. The dispenser shuts off automatically once user-set time has elapsed. Labconco has designed WaterPro PS Stations with the right combinations of purification technologies to meet your needs. Choose from specialized stations for general chemistry, analytical, life science or combination usage. In addition, models designed for general chemistry may be upgraded with additional purification modules at a later time for use in analytical or life science applications.Click Here to View Product Video INCLUDED: The Labconco 9000521 WaterPro PS Pistol Polishing Station, 115V, 60Hz includes: - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Labconco 9000520 WaterPro PS Polishing Station, 115V, 60HzFeatures - Timed dispense for unattended  (more)operation - Automatic/intermittent recirculation through polishing loop to maintain water quality, minimize bacterial growth and reduce rinse up time - Attractive and corrosion-resistant Type 304 stainless steel front panel - Unpigmented virgin natural polypropylene bowls have no impurities to contaminate water. - Water quality alert. LED flashes the actual megohm-cm when water quality falls below set point. - Built-in dispensing center - Quiet 1/4 hp motor and rotary vane recirculation pump - Dispensing valve - Wall mountable - TOC dump valve allows a small portion of purified water to drain during automatic recirculation to maintain low TOC levels (Analytical Instrument and Hybrid models). - UV flush valve allows a small portion of the purified water to rinse the ultrafilter during automatic recirculation to extend the life of the ultrafilter (Life Science and Hybrid models). - ETL listed (115 volt models) WaterPro PS Polishing Stations deliver Type I, 18.2 megohm-cm water from the dispensing valve at a typical rate of 1.8 liters per minute depending on feedwater flow rate and pressure, and installed purification modules.The control panel includes a timed dispense feature that allows unattended dispensing of pure water without risk of overfilling. The dispenser shuts off automatically once user-set time has elapsed. Labconco has designed WaterPro PS Stations with the right combinations of purification technologies to meet your needs. Choose from specialized stations for general chemistry, analytical, life science or combination usage. In addition, models designed for general chemistry may be upgraded with additional purification modules at a later time for use in analytical or life science applications.Click Here to View Product Video INCLUDED: The Labconco 9000520 WaterPro PS Polishing Station, 115V, 60Hz includes: - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Labconco CentriVap Solvent System INCLUDED: The Labconco 7995810 CentriVap Solvent System, 115V,  (more)60Hz includes: - Benchtop Vacuum Concentrator w/ Glass Lid - Cold Trap -84°C - 12-13 mm Rotor 7455100 - Clear Canister 7460900 - Solvent Insert 7815200 - Vacuum Tubing - Clamps x 6 - Power Cord - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Labconco CentriVap Proteomic SystemVacuum concentrator: Uses centrifugal force, vacuum and contr (more)olled temperature from -4C upto +100C Sensor that reads internal chamber temperature Vacuum port with quick disconnect fitting for 0.25 in. ID tubing Has quick-stop system, control panel and glass lid DNA rotor accommodates up to 60 each 1.5 ml and 72 each 0.5 ml microcentrifuge tubes Cold trap: CFC/HCFC-free refrigeration system with 1/3 hp compressor Reaches -50C (-58F) for solvent recovery and to protect the vacuum pump by trapping moisture, vapors and corrosive fumes as they evaporate from the samples Temperature graph that illuminates green when the collector coil reaches operating temperature of -40C 4-liter stainless steel collector Acrylic lid with two Quick-Disconnect fittings INCLUDED: The Labconco 7989600 CentriVap Proteomic System, 115V, 60Hz includes: - Refrigerated Benchtop Vacuum Concentrator w/ Glass Lid - Cold Trap -50°C - DNA Rotor - Vacuum Tubing - Clamps x 6 - Power Cord - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Labconco CentriVap Acid SystemVacuum Concentrator: Acid-Resistant benchtop type with glass lid B (more)rushed stainless steel and glacier white, powder-coated steel exterior with blue accents 300w heater with heat from OFF to HI (100C) in one degree increments and heat time from 1 to 999 minutes PTFE-coated chamber with Hastelloy shaft Cold Trap: HCFC/CFC-free refrigeration system with 1/3 hp compressor lowers cold trap to -50C Temperature graph that illuminates green when the collector coil reaches operating temperature INCLUDED: The Labconco 7983013 CentriVap Acid System, 115V, 60Hz includes: - Acid-Resistant Benchtop Vacuum Concentrator - Cold Trap -50°C - Clear Canister 7460900 - Acid Insert 7814800 - 12-13 mm Acid-Resistant Rotor 7455101 - Glass Trap 7397605 - Vacuum Tubing - Clamps x 6 - Power Cord - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Labconco CentriVap Aqueous SystemIdeal forbiology, microbiology, biochemistry, pharmaceutical resear (more)ch, and analyticalchemistry laboratories, centrifugal concentrators quickly process theevaporation of multiple small samples. Benchtop Vacuum Concentrators feature30.5cm (12") dia. epoxy-coated aluminum chambers to accommodate a wideselection of high-capacity rotors. A microprocessor controls centrifugal motionto eliminate bumping and foaming during vacuum evaporation. The brushless motorhas a maximum speed of 1725rpm. A large automatic vacuum release valve preventsloss of sample by quickly releasing the vacuum before the rotor stops. Duringstartup, a built-in vacuum delay prevents bumping by allowing the rotor toachieve set speed before applying vacuum. Up to nine user-set programs may bestored to define temperature, heat time, and run time. Program temperature andtime may be altered while the program is being run. Timer may be set for 1 to999 minutes. An easy-to-read LCD shows program number, actual and set pointtemperatures, heat time, run time, and a heat boost indicator. The controlpanel features three Quick-Start* buttons that each store one user-set program.An audible alarm signals completion of set point run time. INCLUDED: The Labconco 7982010 CentriVap Aqueous System, 115V, 60Hz includes: - Benchtop Vacuum Concentrator - Cold Trap -50°C - Clear Canister 7460900 - Moisture Insert 7814900 - 12-13 mm Rotor 7455100 - Vacuum Tubing - Clamps x 6 - Power Cord - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Labconco FreeZone Stoppering Tray Dryer with 6-Port Manifold FreeZone Stoppering Tray Dryers lyophi (more)lize moderate to largeloads of vials or serum bottles and stopper them under vacuum. They offertemperature control from -40 to +40C. Options include a 6-port manifold,isolation valve and sample trays. A pneumatic mechanism stoppers containers undervacuum on three large adjustable processing shelves, 16.5” x 12” each. AnHCFC/CFC-free refrigeration system and electric heater cool and heat fluidmedium that is circulated through the shelves to maintain shelf temperatureswithin ±1C. Lyo-Works™ OS lets the user set up to 30 programs, with up to 16steps each; record, chart and store data; and receive email alerts. The traydryer connects to a FreeZone Console Freeze Dryer that provides a real timedisplay of the tray dryer’s parameters on a large capacitive touch screen.Features Three 16.5 x 12 in. temperature-controlled (±1C), adjustable shelves with sample temperature sensors Chamber pre-freezes samples to save time and money by eliminating need for separate freezer and product transfer Up to 594 sq. inches of shelf space Circulating fluid in shelves ranges from -40 and +40C 1/8 in. OD backfill port introduces sterile air or inert gas from outside source to chamber, protecting samples from atmospheric moisture and contaminants Lyo-Works™ OS provides real time display of freeze dryer and tray dryer parameters on 5 in. full color, capacitive touch screen on connected FreeZone 6, 12, or 18L Freeze Dryer (sold separately) Microprocessor-based controller allows up to 30 different temperature programs to be stored and repeated, each using up to 16 different steps Display provides navigation to manual or program mode, probe temperatures, vacuum in mBar, Torr or Pa, step of program in progress, time remaining in present step, and end of program, as well as alarms Optional 6-Port Tray Dryer Manifold accommodates either 1/2 in. or 3/4 in. flask adapters and connect to flasks and other glassware Optional built-in isolation valve separates Stoppering Tray Dryer from freeze dryer to shorten time necessary to reestablish working vacuum levels and to provide means for determining end point Freeze dryer, vacuum pump with displacement of at least 163L/minute, and freeze dry glassware (if not bulk freeze drying) are required (not included) INCLUDED: The Labconco 794801100 FreeZone Stoppering Tray Dryer with 6-Port Manifold 115V, 60Hz includes: - Sample Temp Sensor x 3 - Communication Cable - Power Cord - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Labconco FreeZone Stoppering Tray Dryer FreeZone Stoppering Tray Dryers lyophilize moderate to larg (more)eloads of vials or serum bottles and stopper them under vacuum. They offertemperature control from -40 to +40C. Options include a 6-port manifold,isolation valve and sample trays. A pneumatic mechanism stoppers containers undervacuum on three large adjustable processing shelves, 16.5” x 12” each. AnHCFC/CFC-free refrigeration system and electric heater cool and heat fluidmedium that is circulated through the shelves to maintain shelf temperatureswithin ±1C. Lyo-Works™ OS lets the user set up to 30 programs, with up to 16steps each; record, chart and store data; and receive email alerts. The traydryer connects to a FreeZone Console Freeze Dryer that provides a real timedisplay of the tray dryer’s parameters on a large capacitive touch screen. Features Three 16.5 x 12 in. temperature-controlled (±1C), adjustable shelves with sample temperature sensors Chamber pre-freezes samples to save time and money by eliminating need for separate freezer and product transfer Up to 594 sq. inches of shelf space Circulating fluid in shelves ranges from -40 and +40C 1/8 in. OD backfill port introduces sterile air or inert gas from outside source to chamber, protecting samples from atmospheric moisture and contaminants Lyo-Works™ OS provides real time display of freeze dryer and tray dryer parameters on 5 in. full color, capacitive touch screen on connected FreeZone 6, 12, or 18L Freeze Dryer (sold separately) Microprocessor-based controller allows up to 30 different temperature programs to be stored and repeated, each using up to 16 different steps Display provides navigation to manual or program mode, probe temperatures, vacuum in mBar, Torr or Pa, step of program in progress, time remaining in present step, and end of program, as well as alarms Optional 6-Port Tray Dryer Manifold accommodates either 1/2 in. or 3/4 in. flask adapters and connect to flasks and other glassware Optional built-in isolation valve separates Stoppering Tray Dryer from freeze dryer to shorten time necessary to reestablish working vacuum levels and to provide means for determining end point Freeze dryer, vacuum pump with displacement of at least 163L/minute, and freeze dry glassware (if not bulk freeze drying) are required (not included) INCLUDED: The Labconco 794801000 FreeZone Stoppering Tray Dryer 115V, 60Hz includes: - Sample Temp Sensor x 3 - Communication Cable - Power Cord - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Labconco RapidVap N2/48 Evaporation System with RS-232 LinkRapidVapN2/48 Evaporation Systems use nit (more)rogen blow down, vortex motion and heat tospeed evaporation of up to 48 small samples or eight 450 milliliter samples atonce. A stream of nitrogen or dry gas is directed downward onto the surface ofthe sample. Nitrogen blow down reduces the partial pressure directly over theliquid to speed evaporation and help remove the solvent as it evaporates. TheseSystems may be used to prepare samples for applications such as drug developmentand metabolism, bioresearch, combinatorial chemistry, environmental testing,forensics and toxicology. There are eight clusters of six ports each. Nitrogen may be delivered to 2, 4,6 or 8 clusters at once so that nitrogen is conserved when a full load is notrequired. Microprocessor-controlled vortex motion increases surface area forfaster evaporation while continually mixing the sample to maximize recovery.Utilizing a dry block heating method, RapidVap N2/48 Systems provide a morereliable alternative to maintenance-intensive, contamination-prone water baths.INCLUDED: The Labconco 7910010 RapidVap N2 Evaporation System with RS-232 Link, 115V, 50/60Hz includes: - Exhaust Hose (6 ft.) - Clamp - Manifold Guide x 3 - Heat Transfer Grease - RS232 Cable Assembly - Power Cord - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Labconco RapidVap N2/48 Evaporation SystemRapidVapN2/48 Evaporation Systems use nitrogen blow down,  (more)vortex motion and heat tospeed evaporation of up to 48 small samples or eight 450 milliliter samples atonce. A stream of nitrogen or dry gas is directed downward onto the surface ofthe sample. Nitrogen blow down reduces the partial pressure directly over theliquid to speed evaporation and help remove the solvent as it evaporates. TheseSystems may be used to prepare samples for applications such as drug developmentand metabolism, bioresearch, combinatorial chemistry, environmental testing,forensics and toxicology. There are eight clusters of six ports each. Nitrogen may be delivered to 2, 4,6 or 8 clusters at once so that nitrogen is conserved when a full load is notrequired. Microprocessor-controlled vortex motion increases surface area forfaster evaporation while continually mixing the sample to maximize recovery.Utilizing a dry block heating method, RapidVap N2/48 Systems provide a morereliable alternative to maintenance-intensive, contamination-prone water baths.INCLUDED: The Labconco 7910010 RapidVap N2 Evaporation System with RS-232 Link, 115V, 50/60Hz includes: - Exhaust Hose (6 ft.) - Clamp - Manifold Guide x 3 - Heat Transfer Grease - Power Cord - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Labconco RapidVap N2 Evaporation System with RS-232 LinkThe RapidVapN2 Evaporation Systems offer a m (more)ore efficient, automatic alternative toKuderna-Danish and rotary evaporators and may be used with a broad range ofaggressive chemicals. In RapidVap N2 Systems, a stream of nitrogen or dry gasis directed downward onto the surface of the sample. Nitrogen blow down reducesthe partial pressure directly over the liquid to speed evaporation and helpremove the solvent as it evaporates. Nitrogen may be programmed for 2, 4, 6 orall 8 tube locations. Vortex motion and dry heat may also be applied to furtheraccelerate processing. The block holds eight large samples, up to 450 milliliters each, making itefficient for environmental and residue testing. An accessory block that holdseight 170 milliliter tubes suitable for solid phase extraction is alsoavailable. In many of these applications, the samples should not go to dryness.The unique Cool-Zone block and tube design significantly reduces theevaporation rate after end point is achieved. The Cool-Zone insulates thesamples and allows the researcher adequate time before the samples reachdryness to remove them or to perform solvent exchange procedures. Alarms thatsignal when timed end point has occurred and when the RapidVap senses that theprocess is nearing completion allow for unattended operation.INCLUDED: The Labconco 7910010 RapidVap N2 Evaporation System with RS-232 Link, 115V, 50/60Hz includes: - Exhaust Hose - Clamp - Sample Tube Caps x 8 - Heat Transfer Grease - RS232 Cable Assembly - Power Cord - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Labconco RapidVap N2 Evaporation SystemChoice of two end-of-run signals: Timed signal: electric time (more)r pauses system, alerts user when set time has elapsed Temperature signal: system monitors temperature difference between sample block and heater caused by evaporative cooling; when evaporation is nearly complete, the two temperatures equalize, causing alarm to sound and PREHEAT/END ALARM light to flash Available with RS-232 Link on rear of unit for two-way communication Ideal for toxicology testing and environmental analysis Speeds evaporation by introducing nitrogen to the sample surface, an efficient alternative to Kuderna-Danish evaporators Improved control panel Easy-to-read LCD display prompts operator to program desired parameters, and displays vortex speed by percentage, actual and set temperatures in C, and total time remaining in minutes. Enter up to nine different protocols into memory for easy repetition of exact test parameters Advanced heating system Contamination- and maintenance-free 1000-watt dry block heating system speeds evaporation rate by supplying a controlled amount of heat from ambient up to 100C Heater and sample block move in tandem for more efficient heat transfer Alarm signals completion of run, allowing samples to be left unattended while evaporating to desired endpoint Efficient operation Brushless DC motor ensures safe, maintenance-free operation and provides smooth, variable-speed power up to 500rpm Produces no potentially dangerous sparks Increased durability Systems may be used with broad range of strong chemicals Powder-coated, aluminum cabinet base with smooth, solvent-resistant acrylic/PVC thermoplastic upper housing Aluminum chamber with PTFE coating conducts heat efficiently and resists corrosion All mechanical components are isolated from chemical fumes and vapors for longer life Chemical-resistant glass lid provides visibility of samples and detaches for cleaning Two clamps hold lid securely in place Phenol-free gasket provides sealing without potential for phenol contamination RapidVap models with optional RS-232 link allow all front panel functions to be performed and monitored from a personal computer (not included) INCLUDED: The Labconco 7910000 RapidVap N2 Evaporation System, 115V, 60Hz includes: - Exhaust Hose - Clamp - Sample Tube Caps x 8 - Heat Transfer Grease - Power Cord - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Labconco RapidVapVacuum Evaporation System with RS-232 LinkThe RapidVapVacuum Evaporation Systems ar (more)e ideal for preparation of samples in a variety ofapplications including drug discovery, agrichemistry, mycology testing andenvironmental analysis. The systems use vacuum along with heat and vortexmotion to help speed evaporation and provide an alternative to traditionalcentrifugal evaporation methods. These systems may be used with a broad rangeof aggressive chemicals. Heat is supplied by a dry block heating system that,unlike water baths, adds no potential source of contamination and requires nomaintenance. The RapidVap Vacuum Evaporation Systems accommodate twelve different,interchangeable accessory sample blocks holding sample volumes from just a fewmilliliters to as large as 450 milliliters. As many as 110 each 12 or 13 mmtubes may be loaded at once. Additional blocks accommodate various tube typesincluding conical centrifuge tubes and scintillation vials. Contact Labconcoabout custom blocks to fit special glassware configurations such as VOA vials.INCLUDED: The Labconco 7900010 RapidVapVacuum Evaporation System with RS-232 Link, 115V, 50/60Hz includes: - Vacuum Hose - Clamps x 2 - Heat Transfer Grease - RS232 Cable Assembly - Power Cord - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Labconco RapidVapVacuum EvaporationAdvanced vacuum function Microprocessor controls vacuum at pr (more)eset level; Automatic vacuum release if power fails LCD shows vacuum level from 0 to 999mbar Rear-mounted vacuum connections: vacuum port, tubing clamps, lid heater receptacle, 30 in.L (76cm) 0.5 in. I.D. tubing for connection to accessory vacuum pump Safety features Lexan™ shield on clear glass lid protects against glass implosion Dual lid clamps hold lid securely in place for vacuum-tight seal Phenol-free gasket provides complete sealing under vacuum PTFE-coated aluminum chamber Audible/visual alarm for end point detected by temperature sensors at heater and block Optional Lid Heater 40w heater plugs into electrical receptacle on rear Eliminates fogging, increases visibility when evaporating water or other high-boiling-point solvents Improved control panel Easy-to-read LCD display prompts operator to program desired parameters, and displays vortex speed by percentage, actual and set temperatures in C, and total time remaining in minutes. Enter up to nine different protocols into memory for easy repetition of exact test parameters Advanced heating system Contamination- and maintenance-free 1000-watt dry block heating system speeds evaporation rate by supplying a controlled amount of heat from ambient up to 100C Heater and sample block move in tandem for more efficient heat transfer Alarm signals completion of run, allowing samples to be left unattended while evaporating to desired endpoint Efficient operation Brushless DC motor ensures safe, maintenance-free operation and provides smooth, variable-speed power up to 1000rpm Produces no potentially dangerous sparks Increased durability Systems may be used with broad range of strong chemicals Powder-coated, aluminum cabinet base with smooth, solvent-resistant acrylic/PVC thermoplastic upper housing Aluminum chamber with PTFE coating conducts heat efficiently and resists corrosion All mechanical components are isolated from chemical fumes and vapors for longer life Chemical-resistant glass lid provides visibility of samples and detaches for cleaning Two clamps hold lid securely in place Phenol-free gasket provides sealing without potential for phenol contamination RapidVap models with optional RS-232 link allow all front panel functions to be performed and monitored from a personal computer (not included) INCLUDED: The Labconco 7900000 RapidVapVacuum Evaporation, 115V, 60Hz includes: - Vacuum Hose - Clamps x 2 - Heat Transfer Grease - Power Cord - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Labconco Glass Liquid Trap Liquid Trap prevent liquid from entering the pump. LiquidTrap, is placed  (more)between the RapidVap and diaphragm pump to prevent liquids fromentering the pump when using high boiling point solvents. Consists ofborosilicate glass container with 2550 milliliter trapping capacity, two1/2" diameter stems with elbows, foam insulation lid, and epoxy-coatedsteel bracket with hooks that allow the trap to hang on the side of theRapidVap Vacuum System. Alternatively, the bracket serves as a stand tostabilize the glass container resting on a flat work surface. This trap mayalso be used with pre-2005 CentriVap Cold Traps. INCLUDED: The Labconco 7873400 Glass Liquid Trap includes: - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Labconco Clear Manual Stoppering ChamberForuse with 6L, 12L and 18L Freeze Dryers.DryingChambers pro (more)vide a means to attach flasks to your freeze dryer or containsamples in bulk.Click Here to View Product Video INCLUDED: The Labconco 7868020 Clear Manual Stoppering Chamber, 115V, 60Hz includes: - Chamber - Gasket - Power Cord - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Labconco Clear Canister for Chemical Trap with stand for RapidVap and CentriVap SystemsClearPolyprop (more)ylene Canister with Stand accommodates any of the following trapinserts (sold separately): Acid Trap Insert 7814800, Moisture Trap Insert7814900, Radioisotope Trap Insert 7815000, Solvent Trap Insert 7815200, andAmmonia Trap Insert 7995600. Canister has inlet and outlet 3/4" NPT -1/2" tube fittings.Clearpolypropylene canister allows visual inspection of trap contents. Chemical TrapInsert is required, sold separately. INCLUDED: The Labconco 7815300 Clear Canister for Chemical Trap with stand for RapidVap and CentriVap Systems includes: - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Labconco 7814800 Acid Trap Insert The Labconco 7814800 Acid Trap Insert Traps is connected between a (more)n evaporator and vacuum pump to provide additional protection to the pump. The insert contains acid neutralizing desiccant that changes from off white to purple when exhausted. Please Note: This includes the insert ONLY and requires a Clear Polypropylene Canister with mounting bracket or Clear Polypropylene Canister with stand for proper use. INCLUDED: The Labconco 7814800 Acid Trap Insert includes: - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Labconco CentriVap Mobile System with Heat BoostCentriVapMobile Systems combine the separate vacuum  (more)concentrator and cold trapcomponents into one space-saving console and include casters for portabilityfrom laboratory to laboratory. A 12-13 mm Rotor and Solvent Trap are alsoincluded. The interior can accommodate a vacuum pump — the only additionalcomponent necessary to begin processing. INCLUDED: The Labconco 7812013 CentriVap Mobile System with Heat Boost, 115V, 60Hz includes: - Rotor 12-13 mm - Coupling Insert - Cartridge, Solvent Trap - Clamp - Power Cable - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty