Labconco 7995810 CentriVap Solvent System, 115V, 60Hz

USBECK Aluminum Spindle Lift 20 x 20 cm Lifting Stand, Laboratory Lifting Table Tabletop dimensions: (more) 200 x 200 mm With traces of wear

Motic LUMOS Fluorescence LED High Powered Light Source Objectives Optional Optical System Spectrums (more) ranging from NUV to visible to NIR Illumination Port for Fiber-Optic Coaxial Illumination Features - Features apochromatic design - Compared to the lifespan of only 200 hours and the high cost of mercury-arc lamps, the LUMOS FL provides over 20,000 hours of use - No light toxicity like traditional mercury-arc lamps which can damage samples with infrared light heat toxicity - Instant On/Off: Unlike traditional mercury-arc lamps which take up to 20 minutes to reach optimal brightness levels when turned on, the LUMOS FL is ready for use at the flip of a switch - Dose not pose toxic gas danger to users - Avoids stray light interference during observation, helping to avoid errors in user interpretation of images - Individually controls each LED channel and eliminates need for multiple filters therefore reducing filter cube expense - Features a broad spectrum spread which can satisfy multiple user applications Do more with your Motic microscope setup with the cutting-edge Motic LUMOS Fluorescence LED High Powered Light Source. With this high-performance plug and play illuminator device, you will obtain stunning multi-channel images that can be seamlessly overlaid using our intuitive imaging software. Featuring UV, blue and green color LED channels, with ultra-accurate wavelengths and contrast provided by its black background, this accessory yields sharp images without the need for constant bulb changes or an alignment. INCLUDED: The Motic LUMOS Fluorescence LED High Powered Light Source includes: - Control Box - DC Power Supply - Manufacturer's Documentation - 5 Year Manufacturer's Warranty

Hermle 24 x 2.0ml spin column kit (for Z216 series only) The Hermle 24 x 2.0ml spin column kit is de (more)signed for use with the Hermle Z216 series centrifuge models. This rotor can hold up to 24 x 2.0ml spin column kits and can spin at a maximum speed of 13,500 RPM, generating a maximum relative centrifugal force (RCF) of 17,317 x g. The rotor is angled at 45°, providing optimal separation and collection of samples. This rotor is ideal for laboratory use, particularly in molecular biology applications such as DNA and RNA extraction and purification. With its high-speed and high-capacity capabilities, the Hermle 24 x 2.0ml spin column kit provides efficient and reliable sample processing. INCLUDED: The Hermle 24 x 2.0ml spin column kit (for Z216 series only) includes: - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Analysis time: 3.5 min at 30 mg N (6.5 min at 200 mg N) Distillation capacity: ~ 40 ml/min Measuring (more) range: 0.1 – 200 mg N Reproducibility: 1% RSD (including digestion step) Recovery: 99.5% for nitrogen levels between 1 – 200 mg N Drain tube: 200 ml in 2 s. Reagent pump volumes: 0 – 150 ml in 10 ml increments Delay: 0 – 999s SAfE Patented: 0 – 15 s Water usage: 2 l/min with water temp of 30°C (During distillation): 1 l/min with water temp of 15°C Dimensions: (WxDxH): 530 x 440 x 760 mm Weight: 35 kg

Print resolution: 203 dots/inch, 8 dots/mm – 300 dots/inch, 12 dots/mm Maximum print width: 203 dpi  (more)– 104 mm, 300 dpi – 105.7 mm Programmable constant print speeds: 203 dpi – 2 to 6 inch/sec, 300 dpi- 2 to 4 inch/sec Media label width: Minimum – 25 mm, Maximum 118 mm, Maximum tear/cutter – 114 mm Media total thickness (including liner, if any): Minimum – 0.060 mm, Maximum – 0.25 mm Media maximum roll outer diameter: 38.1 to 76.2 mm core – 213 mm Ribbon width: Minimum – 30 mm, Maximum – 110 mm Ribbon standard lengths: 76 mm diameter – 450 m Dimensions (HxWxD): 283 x 276 x 454 mm Weight: 13 kg

CABINET CSB60 - CHEMISAFE Modular solutions for storing chemicals. - Entirely made of 15/10 mm thic (more)k electrogalvanized steel sheet, cold bent - External finish made of 90 micron acid resistant epoxy resin and passage through a thermal tunnel at 200 °C - Monocoque construction with feet for leveling the cabinets - Simple single layer swing doors - Lock and key - Door opening at an angle of 110° - External zip in corrosion resistant plastic - Compartments equipped with fixed retention shelves made of plasticized/painted/stainless steel with adjustable height - Connection collar Ø 125 mm - Standardized pictograms according to ISO 3864 standards Supplied: - 3 plasticized steel shelves (max load 40 Kg distributed evenly) Optional: - Shelves - Timer - Plinth - Retention tank - Door open alarm - Ventilation - Filter

Agilent Infinity 1260 Fluorescence Detector (FLD) G1321B Spectra. Firmware A.07.02 8 ul Flow Cell. K (more)eeps original packaging. The FLD provides quantitative data and fluorescence spectra from a single run. Simultaneous detection of multiple wavelengths improves sensitivity and selectivity. Features include: Rotating gratings for on-line, multi-signal spectral data acquisition without loss of sensitivity. Lower limits of detection with Raman S/N > 3000 (using dark signal noise reference). Spectra and quantitative data from a single run. Simplified optical design to optimize baseline stability. Resolution gain of up to 100% in fast LC using 145 Hz data acquisition rate. Long life xenon lamp for maximum sensitivity. Long life flash lamp (> 4000 hours). Easy front access allows quick inspection or change of the flow cell. Agilent Infinity 1260 Fluorescence Detector (FLD) G1321B Spectra. Lower detection limits and easier spectral analysis for HPLC and UHPLC. As a stand-alone detector or configured in an automated system, the Agilent 1260 Infinity Spectra Fluorescence Detector brings highly sensitive fluorescence detection to your lab. This easy-to-use detector provides quantitative data and fluorescence spectra from a single signal. Simultaneous multiple wavelength detection improves sensitivity and selectivity. Use online spectral information for rapid method optimization and separation quality verification. High-speed fluorescence detection data processing up to 145Hz, keeping pace with ultra-fast LC analysis speed.

Scilogex Fixed Angle Rotor PCR 8 Strips x 12The Scilogex Fixed Angle Rotor PCR 8 Strips x 12 has the (more) capacity to accomodate 8 strips x 12 and can a reach maximum speed of 14,000RPM. For use with the DM0636 centrifuge. INCLUDED: The Scilogex Fixed Angle Rotor PCR 8 Strips x 12 includes: - Cover - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

KNF LABOPORT SR 820 G IP30 Diaphragm Pumping System Ultimate Vacuum 6 mbar Maximum Flow Rate 20L/mi (more)n (1.2 m3/h) Protection Class IP30 Features - Ideal for extremely aggressive/corrosive gases and vapors - High level of vapor and condensate compatibility - Integrated gas ballast valve - Integrated rotational speed control - 3-color status display for in operation / stand-by / error - Compact, quiet and reliable - Start against ultimate vacuum of the pump - Modular expandable - 100% oil-free transfer - Environmentally friendly The KNF LABOPORT SR 820 G IP30 Diaphragm Pumping System is a chemically resistant vacuum pump system comprising chemically resistant diaphragm vacuum pump, base plate and two separator flasks on suction and pressure side. Based on the high level of vapor and condensate compatibility the system is perfectly suited for extremely aggressive / corrosive gases and vapors. INCLUDED: The KNF LABOPORT SR 820 G IP30 Diaphragm Pumping System includes: - 2 x Coated Collection Flasks - 2 x Flask Clamps - Power Cord - Operator's Manual - Manufacturer's Documentation - 2 Year Manufacturer's Warranty