Labconco 7910010 RapidVap N2 Evaporation System with RS-232 Link, 115V, 50/60Hz

Water bath from 25°C to 99.9°C for the laboratory The shaking water baths of the LAUDA Hydro series  (more)stir laboratory samples with linear or orbital motion, depending on the model. They are reliable instruments, ideal for any laboratory application, be it biological, medical or biochemical, guaranteeing a homogeneous distribution of the temperature. The integrated speed controller enables a load-independent, continuously adjustable stirring movement with soft start. The H 20 SW and H 20 SOW shaking water baths are equipped with a cooling coil as standard. The temperature range can be extended to a minimum of +10°C by connecting them to the domestic water supply or commercially available circulating chillers. Qualitative characteristics - Digital regulation of the temperature and indication via LED display - Load-independent, continuously variable stirring with soft start - Electronic monitoring of the thermoregulator functions, with two fuses for under/over temperature protection - Tank, frame, cover with condensation channel, shaking basket and heater in stainless steel - No dripping condensation – arched insulating lid to reduce heat loss and prevent condensation from dripping onto samples Operation All water baths come standard with a perforated pan and no racks are required. Flasks and containers can be placed directly on the bottom. The drain valve is located on the rear side. Controllers The control panel consists of a large, high-contrast TFT display and a membrane keyboard with four softkeys, protected against dirt and water drops. The menu will guide you on how to use the bain-marie correctly. Esempi applicativi - Bacteriological tests - Molecular biology - Demulsivity studies - Processing of chemical reactions - Thawing - Metallurgical analyses - Incubation of microbiological assays - heating reagents - Environmental studies - Food Processing (QC) - Water quality research - Cytochemistry Accessories available Water level regulator. The heating element is located directly under the sieve plate for even temperature distribution in the tank. Electronic monitoring of the temperature regulator. Two independently operating temperature fuses. Improved visual and audible alarms for increased sample safety. Control elements tilted back for increased splash protection and improved operating comfort. - Perforated plate to place the glassware directly on the bottom. - Fill mark max. to prevent overflows. - Easy removal of sieve plate for cleaning. Highest quality materials: tank interior, lid, sieve and heating element made of stainless steel. Heat insulating lid in stainless steel, double walled with internal curvature to guide the condensate. Limescale deposits inside the water bath can be removed with normal commercial descalers. The internal tray can be easily disassembled and lifted for quick and thorough cleaning. Recommended accessories - Water level regulator. Thanks to this accessory, the loss of water inside the instrument (through evaporation) is compensated and the water level is kept constant. Furthermore, it allows use at temperatures below ambient temperatures, with a minimum of approx. 3°C above tap water temperature.

Polyscience AD07R-20-A11B 7L Space-Saving Refrigerated Circulator, Advanced Digital (-20 to 200C), 1 (more)20V, 60Hz3D Visualization of the Polyscience CirculatorThe rendered image can be freely rotated in a full 360-degree view, allowing you to zoom in, pause, and explore every angle. For enhanced detail, the rendering can also be displayed in full-screen mode. This 3D model is designed exclusively for visualization purposes and may not accurately represent the actual appearance of your product. Your browser does not support iframes. The Polyscience AD07R-20-A11B 7L Space-Saving Refrigerated Circulator is intended for the precise temperature control ofsuitable liquids in a reservoir. Extremely easy to use and maintain, itcombines design innovation with highly intuitive operation to deliverconvenient and versatile liquid temperature control for a wide range ofapplications.Features Intuitive 3.75” (9.5 cm) display with touch-pad control 4 languages: French, German, Spanish, English Swivel 180™ Rotating Controller On-board connectivity: USB-A & B, Ethernet, RS-232/RS-485 and external temperature probe On-screen prompts Automatic performance optimization and specific heat tuning Single-point calibration capability Click Here to View Product Video INCLUDED: The Polyscience AD07R-20-A11B 7L Space-Saving Refrigerated Circulator, -20°C to 200°C, 200W; 120V includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

AVPS: for supplying products not being compatible among each other. 2 seperate storage shelves. Door (more) lock Height adjusable shelves Electronic warning system when fan fails Sampling valve for filter sutaration test Air flow: 90m3 / h Air recciculation: 3x / min Volume collecting tank: 3L )with absorbing layer) Outer dimensions (w x d x h): 800 mm x 505 mm x 2150 mm Inner dimensions (w x d x h): 700 mm x 425 mm x 1730 mm 230V / 50Hz / 47W

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

KNF IP65 FEM 1.02 KT.18RCP Liquid Pump KNF SIMDOS diaphragm pumps offer a variety of options to suit (more) most laboratory liquid metering and dosing needs. The FEM 1.02 KT.18RCP version has a liquid transfer flow rate of 0.03 – 200 mL/min and discreet dosing volumes of 0.03 – 999 mL. It is constructed with the following chemically-resistant flow path materials: polypropylene head, PTFE covered diaphragm, and FFKM valves. The easy-to-read display combined with a touch control knob makes programming and access of all functions very intuitive. Besides onboard manual control, this pump offers analog control, start/stop and reset/prime TTL logic control, output signal fault alarm, and RS 232 PC control. A RC control interface cable and RS 232 cable with D-Sub 9 connector are included. A foot switch for start and stop impulses is available. All SIMDOS pumps are simple and intuitive to operate, compact, and quiet, making them a welcome addition to any business or academic lab. They are effective against pressures of up to 85 psig and transfer viscous media up to 500 centistokes (reduced flow rate above 150 cSt). The integrated software permits the transfer parameters to be modified for a range of different viscosities at the touch of a button. With a durable and IP65 splash-proof design, these pumps are maintenance free, and provide trouble-free ±2% accuracy and ±1% repeatability performance. SIMDOS 02 pumps are self-priming up to 6.6 feet of water, and can run dry indefinitely without damage. Also, unlike peristaltic pumps, there are no troublesome tubing to break or fatigue. INCLUDED: The KNF IP65 FEM 1.02 KT.18RCP Liquid Pump includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Benchmark MyFuge12 Mini Centrifuge Unlike traditional mini centrifuges, the new MyFuge 12 eliminates (more) the need to change rotors when switching between microtubes and PCR strips. The included, unique COMBI-Rotor is all that is required for running 12 microtubes and/or 4 PCR strips. With a fixed speed that produces 2,000 x g, this centrifuge is perfect for quick spin downs. Simply close the lid and the unit quickly ramps up to 5,500 rpm. Open the lid, and the rotor quickly decelerates for removal of samples. At just 5.5 inches wide and less than 4.5 inches tall, the MyFuge 12 truly is a personal microcentrifuge with unmatched capacity and flexibilty. INCLUDED: The Benchmark MyFuge12 Mini Centrifuge includes: - COMBI-Rotor - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

The PowerPac Basic power supply is designed to provide constant voltage or current electrophoresis a (more)pplications. The power supply operates at the value specified for the constant parameter, with limits for the other parameters. To prevent damage to the electroferese cell, the PowerPac Basic provides automatic crossover to constant current or constant voltage depending on which set limit is first reached. If the set limit of the non constant parameter is reached, the power supply will switch, making the limiting non constant parameter the new constant. Output specifications: Voltage: Adjustable from 10 to 300 volt, in 1 volt increments Current: Adjustable from 4 to 400 mA, in 1 mA increments Power: 75 W

The GeneAmp PCR System 9700 is an automated instrument,  specifically designed Instrument for the am (more)plification of nucleic acids using the Polymerase Chain Reaction (PCR) process. The user interface consists of a control panel with a full numeric keypad, soft keys, and a graphical display screen that shows the time and  temperature profile for each run. Equipped with a 96 well block Sample temperature range: 4.0 to 99.9°C The eight pre-coded methods are: AmpliCycle Sequencing AmpliTaq Gold DNA Polymerase BigDye Terminators General PCR LSM2 Time Release PCR Touchdown PCR XL PCR

Simultaneously perform dewaxing and antigen retrieval on slides prior to immunohistochemical stainin (more)g. Module offers consistent antigen retrieval for high quality immunohistochemistry. Using gentle heat, the retrieval device quickly produces outstanding results while maintaining the integrity of delicate tissue. In addition, most users can streamline testing practices by consolidating various antigen retrieval methods into only one or two PT Module antigen retrieval device procedures that can be run simultaneously. Precise temperature control without the damaging effects of temperature variations, microwaves or pressure delivers a level of consistency unmatched by any other instrument available. Easy to use, one-touch operation via built-in touchscreen Operator defined, preprogrammed time and temperature settings Dual reaction baths, each with 24-slide capacity, for simultaneous operation of two independent procedures Proprietary epitope recovery solutions for safe, nontoxic, solvent-free and environmentally improved dewaxing Provides for rapid, gentle heating, eliminating microwave and pressure cooker variability Maintains excellent tissue/cellular morphology Efficient, time-saving transfer of fully compatible slide racks directly to any Autostainer after treatment to avoid slide manipulation Fully programmable for overnight operation or delayed-start, early-morning pre-heating Can be connected to a remote computer to monitor and log antigen retrieval reports for regulatory compliance. The PT Module is fully automated and includes PT Monitor software for printing/maintenance of regulatory compliant procedural reports. Slide Capacity: 48 Glass slides (2 tanks of 24 slides) Reagent Capacity: 1.5 L Including PC