Labconco 7982010 CentriVap Aqueous System, 115V, 60Hz

VACUUBRAND MZ 2C NT +2AK Chemistry Vacuum System Ultimate Vacuum 7 mbar / 5 torr Maximum Pumping Spe (more)ed 1.4 CFM at 60Hz Number of Heads/Stages 2/2 Features - Outstanding chemical resistance and superior vapor tolerance. - High performance even at low vacuum levels. - Optimized vacuum even with gas ballast for condensate purge. - Whisper quiet and very low vibration. - Separators at inlet and outlet to collect condensates. This chemistry vacuum system has a wide range of applications like evacuation, evaporation and pumping of gases and vapors in chemical, biological and pharmaceutical laboratories where there are no requirements for condensation of solvent vapors at the outlet. Typical applications are vacuum concentrators, gel dryers and filtration. The separator at the inlet (AK), made of glass with protective coating, retains particles and liquid droplets. The separator at the outlet collects condensate, avoids condensate backflow towards the pump, and reinforces the whisper-quiet operation of the pump. INCLUDED: The VACUUBRAND MZ 2C NT +2AK Chemistry Vacuum System includes: - Power Cord - Operator's Manual - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Labconco Clear CanisterClearPolypropylene Canister with Mounting Bracket, to attach the canister to  (more)theside of the CentriVap Cold Trap. Includes 17" PVC tubing and two clamps.Accommodates any of the following Chemical Trap Inserts: 7814800 Acid Trap,7814900 Moisture Trap, 7815000 Radioisotope Trap, 7815200 Solvent Trap or7995600 Ammonia Trap. Trap Inserts are sold separately.Clearpolypropylene canister allows visual inspection of trap contents. Chemical TrapInsert is required, sold separately. INCLUDED: The Labconco 7460900 Clear Canister includes: - 17" PVC Tubing - Clamps x 2 - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

HEPA filtered horizontal laminar airflow (crossflow) creates an ISO Class 5 (14644-1) / GMP Class A  (more)(Annex 1) work area and prevents ambient air from entering the work area, ensuring product protection. Horizontal velocity: 0.45 m/s Light intensity: > 1000 Lux Pre-filter (ISO 16890 (former G3: EN779)): Coarsefilter Horizontal HEPA filter (EN 1822-1): H14 Dimensions (WxDxH): 1880 x 893 x 1153 mm Interior dimensions (WxDxH): 1859 x 570 x 736 mm Height support frame: 800 mm Weight: 190 kg

Flow control unit is not included

VACUUBRAND MD 4C NT +AK SYNCHRO+EK Chemistry Vacuum System Ultimate Vacuum 1.5 mbar Max. pumping s (more)peed at 60 Hz 2.2 cfm Number of Heads/Stages 4/3 Features - Outstanding chemical resistance and superior vapor tolerance - Exceptionally high performance even at low vacuum - Excellent ultimate vacuum even with gas ballast - Simultaneous operation of two independent vacuum applications, with reliable check valves to prevent interference between systems - Excellent environmental friendliness due to efficient solvent recovery This chemistry vacuum system provides the simultaneous operation of two processes with only one pump. Typical applications are rotary evaporators, vacuum concentrators and vacuum drying ovens. Each vacuum connection is provided with a manual valve to regulate the effective flow at each port. The MD 4C NT pump offers more than sufficient pumping speed also for the parallel operation of two challenging applications. The separator at the inlet (AK), made of glass with a protective coating, retains particles and liquid droplets. The waste vapor condenser at the outlet (EK) is highly efficient and compact. The condenser enables near-100-percent solvent recovery, efficient recycling and active protection of the environment.INCLUDED: The VACUUBRAND MD 4C NT +AK SYNCHRO+EK Chemistry Vacuum System includes: - Power Cord - Operator's Manual - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Temperature range: Ambient +5°C to 300°C Temperature uniformity (at 150°C): ± 2.5 K Temperature fluc (more)tuation (at 150°C): ± 0.3 K Heating up time to 150°C: 25 min Recovery time after door was opened for 30 s (at 150°C): 6 min Air change rate at 150°C: 64 x/h Load per rack: 12 kg Total load: 25 kg Interior volume: 20 L Internal dimensions (WxHxD): 222 x 330 x 300 mm Dimensions (WxHxD): 435 x 495 x 520 mm Weight: 27 kg

Scilogex Plate StandThe Scilogex Plate Stand includes the support rod and clamp. Plate size 12 x 8 i (more)n, rod length 31 in. INCLUDED: The Scilogex Plate Stand includes: - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Hermle 8 x 10ml swing out rotor for Z287-A The Hermle 8 x 10ml swing out rotor is a high-capacity ro (more)tor designed for use with the Hermle Z287-A series centrifuge. With a maximum speed of 5,000 RPM and a maximum RCF of 3,717 x g, this rotor can accommodate up to eight 10ml tubes. The swing-out design of the rotor allows for easy loading and unloading of samples, making it a convenient choice for a wide range of applications in molecular biology, cell biology, and biochemistry. With its compatibility with the Hermle Z287-A series centrifuge, this rotor is an excellent choice for any laboratory looking for a reliable and versatile centrifuge rotor that can handle a high sample volume. The rotor's robust design ensures safe and efficient centrifugation of samples, making it a valuable addition to any laboratory setting. INCLUDED: The Hermle 8 x 10ml swing out rotor for Z287-A includes: - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

The Leica DM500 microscope with “plug and play” capability is the ideal tool to make teaching entry- (more)level college and university Life Science courses easy and fun for the instructor and the student. Student-friendly features such as the pre-focused, pre-centered condenser and the EZTube preset diopter, which prevent incorrect adjustments, provide more time for hands-on teaching. EZStore design with integrated handle and cord wrap allows easy carrying, easy lifting and protection against microscope component damage. Head: Binocular Eyepiece: Leica HC PLAN s 10x/20 fixed Objectives: PLAN 4x/0.10, PLAN 10x/0.22, HI-PLAN 40x/0.65 PH2, HI-PLAN 100x/1.30 Oil PH3 Final Magnifications: 40x, 100x, 400x, 1000x Magnification changer: 4 position Focusing: Coaxial focus controls; self-adjusting focus mechanism; 300 micros per fine focus rotation; calibrated in 3 micro increments Illuminator: LED illuminator Camera: Leica ICC50 W Modes: SD mode, USB mode, WiFi mode, Ethernet mode Exposure time: 1 msec – 500 msec Live image: 30 fps (depends on mode and resolution setting) Full frame image acquisition: 5.0 megapixels max.