Labconco 9000620 WaterPro PS/HPLC Polishing Station, 115V, 60Hz

Principle: Any positive and untouched isolation can be performed to separate target cells from PBMCs (more), cultured cells, and dissociated tissue. In addition, cells can be directly isolated from whole blood or bone marrow using StraightFrom Whole Blood MicroBeads. Overall more than 400 different MicroBeads and Isolation Kits are available. Upon automated separation, labeled cells as well as non-labeled cells are obtained and can be used for a variety of downstream applications such as functional and molecular assays, chimerism analysis, and flow cytometry. To ensure cell viability and integrity, cells are kept cooled in Chill Racks. Monitoring: Pre-set programs for all MACS MicroBeads and Isolation Kits ensure accurate sample handling. Sensors constantly monitor the status of the autoMACS Pro, buffer levels, and column status. This ensures optimal instrument performance and safety of samples and operators. Footprint: With MiniSampler: 605×455 mm (W x D) Height: 392.5-454 mm (adjustable touchscreen) It is a benchtop-sized instrument that will easily fit under a common laminar flow hood. Included Chill Racks: The Chill Racks are pre-cooled in the refrigerator (2–8°C). The special coolant contained in the racks switches from fluid to solid at 8°C and maintains a low temperature until the coolant is completely melted. The phase switch is visible. Do not cool racks below 0°C as cell samples may freeze! 1x Reagents rack 1x Chill 5 Rack: contains 24 slots for 5 mL tubes and can be used for cell separations of up to 6 samples. 4x Chill 15 Rack: contains 15 slots for 15 mL tubes and 5 slots for 5 mL tubes. It can be used for cell separations of up to 5 samples. 1x Chill 50 Rack: contains 6 slots for 50 mL tubes, 3 slots for 15 mL tubes, and 3 slots for 5 mL tubes. Up to 3 cell samples can be handled with a Chill 50 Rack.

THB sensor THB sensor is a device measuring ambient conditions, it cooperates with: a computer (1 se (more)nsor via USB 2.0 port); direct cooperation, a weighing device (1 sensor via USB 2.0 port); direct cooperation, a THBR Box (up to 4 sensors connected to THBR Box via USB 2.0 port). The THB sensor is designed to measure parameters such as temperature, humidity, pressure, air density and vibrations level. Sensor registers level of permissible vibrations at the workstation, wherein the values of vibrations level are displayed within 0 - 100% range versus reference values in laboratory conditions. Values exceeding 100% threshold inform about potential occurrence of error greater than permissible error of mass measurement performed using weighing device. Each sensor has its own identification number that is assigned to measurements saved to the database. Ambient conditions can be monitored using: weighing instrument display website Windows OS application: THB Single or THB Multi Android application. On the basis of sent measurements, the THB Single or THB Multi software determines air temperature, humidity, pressure, density and permissible vibrations factor.

Labconco CentriVap 12-17 mm RotorFor use with Labconco CentriVap Systems INCLUDED: The Labconco 7 (more)455000 CentriVap 12-17 mm Rotor includes: - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Julabo DYNEO DD-310F Refrigerated Circulator with Analog Output and Natural Refrigerant (R290), 115V (more)/60Hz Refrigerant R290 Working Temperature Range -30°C - 200°C Cooling Capacity 300W at 20°C Features - Powerful cooling machines - Suitable for internal and external applications - Optimized cooling coil design saves space in the bath tank - Powerful and infinitely adjustable pressure pump - Flow rate 27 l/min, pressure 8.7 psi - Easy switching between internal and external circulation - Large color TFT display, multilingual interface - Central rotary knob (controller) simplifies operation - Integrated programmer for 8 x 60 program steps - Integrated external Pt100 connection - USB port - RS232 interface or analog interfaces (optional) - Bath cover included with delivery - Integrated drain makes emptying liquid easy and safe - Class III (FL) according to DIN 12876-1 DYNEO™ DD-310F refrigerated/heating circulator with an operating range of -30…+200 °C and ±0.01 °C stability. Suitable for temperature applications with circulation to an external apparatus or immersing a device in the bath tank. The DYNEO™ DD circulator incorporates easy change-over for control of fluid circulation internally or externally. A color TFT display with central rotary knob controller includes a multi-lingual interface, integrated programmer, Pt100 port for external temperature control, USB-B connection for external PC control and USB-A for data-logging. Additional communication options include an RS232 port or an analog module interface, for voltage or current control. Infinitely variable centrifugal pump capacity of 8-27 L/min with pressure to 1.5-10.2 psi. Stainless steel bath tank (3-4L) with integrated drain port. Unit fittings: M16x1 male threaded adapters including a pair of 8 and 12 mm hose barbs. 0.3kW cooling power at 20 °C with 20W at -30 °C. Options for heating power (1kW or 2kW) and refrigerant (R290 natural refrigerant or R449A synthetic refrigerant).Class III (FL) according to DIN 12876-1.INCLUDED: The Julabo DYNEO DD-310F Refrigerated Circulator with Analog Output and Natural Refrigerant (R290), 115V/60Hz includes: - 2 Each Barbed Fitting for Tubing 8 and 12 mm Inner Dia. (Pump Connections M16x1 Male) - Power Cord - Operator's Manual - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Heidolph Hei-VAC Control For accurate vacuum control of house vacuum systems or valve-regulated vacu (more)um pumps. Vacuum controller complete with integrated ceramic diaphragm vacuum sensor, regulation valve and venting valve (control valve included in delivery). Ready for use, with wall power supply and user manual. Features: - Entry-level model for digital vacuum control - Easy installation on the evaporator’s condenser shaft or as stand-alone device with base next to the evaporator unit - Manual vent button to prevent foaming - Graphs to display the entire vacuum process - RS 232 interface - Multilingual menu navigation - Compatible with all Hei-VAP Evaporators which do not have an integrated vacuum control INCLUDED: The Heidolph Hei-VAC Control includes: - Power Cord - Operator's Guide - Full 3 Year Manufacturer's Warranty

Heidolph 036110228 Hei-PLATE Mix 'n' Heat Ultimate Advanced Sensor Package, 145mm Plate Temperature  (more)Range 20 to 350°C Speed Range 100 to 1,400 RPM Stirring Capacity 20L Features - Comprehensive safety features including large safety distance and visual residual heat indicator - Automatic stir bar detector for hassle-free operation - Rotational direction setting for optimal sample mixing - Three-stage setting for stirring speed startup behavior - Programmable ramps and individual profiles for increased precision and reproducibility of experiments - Compatible with Pt1000 temperature sensor and double sensor for simultaneous measurement in sample and bath liquid - Three heating modes: FAST for quick heating, PRECISE and PRECISE+ for exact temperature control without overshoot - Multiple interfaces to ensure compatibility with your lab's data management system Heidolph 036110229 Hei-PLATE Mix 'n' Heat Ultimate Advanced Sensor Package, 145 mm Plate is equipped with numerous interfaces for automated laboratory processes. The RS232 and USB B ports allow a control via our integrated Hei-PROCESS solution. You can actually integrate your device in our Hei-CONTROL Pro software via the LAN interface. As of the middle of 2024, the LAN interface will additionally support the communication protocol OPC UA. The USB A interface at the front allows data logging via a USB stick. For more comfort and safety, you can connect the magnetic stirrer with the electric Heidolph lab jack via the USB C interface. There are three heating modes for temperature control: FAST for a quick heating, as well as PRECISE and PRECISE+ for the exact control of your target temperature without overshoot - this is how sensitive samples are optimally protected. Therefore, the device is compatible with the temperature sensor Pt1000 and the double sensor Pt1000 that allows the simultaneous measurement in your sample and in the bath liquid. The possibility to program ramps and to create individual profiles, increases the precision and reproducibility of your experiments. For the stirring speed, there is a three-stage setting (start-up behavior). For mixing your sample optimally, you can set the rotational direction of the magnetic stirring bar and benefit from the automatic stir bar detector. This magnetic stirrer offers all relevant safety features. The large safety distance between the heating plate and the control panel as well as the visual residual heat indicator at temperatures 50 °C protect against burns. The patented Kera-Disk® plate made of anodized aluminum, is chemical-resistant, scratch-proof, and has a diameter of 145 mm. This unique size makes it suitable for the use with many accessories and samples on a small footprint. The material used also enables the fastest heating times.Click Here to View Product Video INCLUDED: The Heidolph 036110228 Hei-PLATE Mix 'n' Heat Ultimate Advanced Sensor Package, 145mm Plate includes: - Magnetic Stirrer Hei-PLATE Mix'n'Heat Ultimate (145 mm diameter) - Pt1000 Temperature Sensor - Pt1000 Holder with Cable Device - Silicone Protective Cover - Power Cord - Operator's Manual - Manufacturer's Documentation - 10 Year Manufacturer's Warranty

This job lot of items comes from a variety of university laboratories. The items were no longer requ (more)ired, collected from various store rooms and facilities. None of these items have been tested at our site - it is likely that some will be spares/repairs, but we anticipate that a reasonable amount should operate well. None of these items have been PAT or electrical safety tested. For this reason, we have marked these as spares/repairs as they should not be used without appropriate electrical safety checks. They are sold as a spares/repairs bundle and further investment in each individual product may be required. It is an excellent opportunity for anyone looking to benefit from individual equipment resale. The units have not been tested at all. Included are; ITEM-37808 Fistreem AquaRec WDA300 UV Water Deioniser PurificationITEM-37813 Bio Rad Bio-Plex System Luminex 100 ITEM-37815 EIC Lab IncubatorITEM-37506 Eppendorf Mastercycler GradientITEM-37816 Bio Rad Luminex XYP MultiplexingITEM-37817 Collection of 4 Walker All in One Fumigation Units ITEM-37818 IKA Werke RCT Basic Heated Stirrer ITEM-37540 Philip Harris Model N30C Lab Oven ITEM-37541 Pharmacia pH MonitorITEM-37505 Hanna HI 2210 pH MeterITEM-37543 Wild Heerburgg M40A Microscope ITEM-37545 Sanyo MSE Micro Centaur Centrifuge ITEM-37546 Clifton NE2D Heated Water Bath ITEM-37550 Spectra Physics CDRH Laser Controller and Two Small Lasers ITEM-37557 AID Elispot Microplate ReaderITEM-37559 Luminex SD Sheath Delivery Unit ITEM-37563 Stands Stepper Motor Controller 8SMC1 ITEM-37561 Polar Cold Reaction Vessel ITEM-37562 Camlab Kreo-Lite HiscopeITEM-37565 Job Lot of Small Lab Glassware 96 Pyrex Test Tubes, 250 Fisher Culture Tubes

This Jouan Water Jacketed Incubator Model IG150 was removed from a university lab where it was surpl (more)us to requirements. This was removed from a university lab where it was surplus to requirements. The unit powers up and has been tested with both a temp and CO2 sensor (not included). It is in good working order but will require calibration upon installation. It is in good cosmetic condition with minor marks. Internal dimensions are: L41cm x W41cm x H60cm.

F2 Mass Standard - knob weights, wooden box. Nominal value - 500 kg.

Waterproof platform scales H315/HR series is designed for operation in locations with high humidity  (more)or direct contact with water. The scales is easily used in areas with no access to power supply from mains, as it features an internal rechargeable accumulator. Design Single load cell stainless steel platform scales H315 HR series is based on a terminal PUE H315 series. The terminal features large backlit LCD display and function buttons for easy operation. The terminal is installed on a pillar for easy readout of measurement result. Optionally, the scales is offered with indicator installed on a cable for mounting it on a wall. The weighing platform structure is made of stainless steel class AISI 316 with a stainless steel load cell providing the highest IP rating of 68. The scales features RS 232 interface, and optionally an additional display socket. The scales is powered from mains or internal rechargeable accumulator. Optionally, the scales can be powered from mains - 110/120VAC 60Hz (non-standard factory option).

Ohaus VXMNPS Digital Mini Pulsing Vortex Mixer, 120V Orbit 0.1 in (2.5 mm) Speed Range (On Mode) 30 (more)0 rpm to 2,500 rpm Control Analog Features - Analog control allows for variable speed adjustments from 300 to 2500 rpm in On Mode, and up to 3500 rpm in Touch Mode - Continuous-duty rating ensures reliable operation for extended periods in demanding laboratory environments - Small orbit of 0.1 in (3.5 mm) is ideal for effective mixing of microplates - Compact design with dimensions of 10.5 in x 4.5 in x 5.4 in, making it easy to fit into any lab space - sturdy construction with a durable Cycoloy housing for long-lasting use - Includes microplate adapter and cup head for versatile applications like ELISA assays, PCR preparations, and more - Easy operation with an analog knob for speed control The Ohaus VXMPAL Analog Microplate Vortex Mixer, 120V, is designed for reliable and continuous-duty mixing of microplates across a broad speed range. This analog model features variable speed control via a simple knob, allowing for precise adjustments from 300 to 2500 rpm in On Mode, and up to 3500 rpm in Touch Mode. Its robust construction, with a durable Cycoloy housing, ensures long-lasting performance in demanding laboratory environments. The mixer’s small 0.1-inch orbit makes it ideal for effective mixing of microplates in applications such as ELISA assays, PCR preparations, and cell disruptions. Compact and easy to use, it includes a microplate adapter and cup head, offering versatility for various lab tasks. INCLUDED: The Ohaus VXMNPS Digital Mini Pulsing Vortex Mixer, 120V includes: - Microplate Adapter and Cup Head - Power Cord - Manufacturer's Documentation - 2 Year Manufacturer's Warranty