Motic BA310 MET-H Trinocular (Erect Image)

Temperature range: ambient +5ºC to 150ºC Setting range: 15°C to 150°C Temperature stability (at 37°C (more)): ±0.1ºC Temperature uniformity within the block (at 37°C): ±0.1ºC Temperature uniformity across similar blocks (at 37°C): ±0.2ºC Display resolution: 1ºC Heat-up rate (ambient to max): 40 min Block capacity: 2 (not included)

Stainless Steel Island Table Height Adjustable 2010×1510

1x Heraeus 75002000 out-swing rotor (max 4700 rpm) suitable for Heraeus Multifuge 4x Heraeus 7500200 (more)2 bucket (max 4700 rpm) 4x Insert (8x 15 ml falcon tube capacity)

Gilson 36110500 4-Block Digital Dry Bath The Gilson 36110500 4-Block Digital Dry Bath delivers preci (more)se temperatures to your samples using digital temperature and time controls. The aluminum blocks (sold separately) concisely fit tubes from 0.5 to 50 mL. The Digital Dry Bath offers convenient digital temperature and time controls with built-in calibration functionality, improving the reliability and reproducibility of your reactions without external thermometers or timers. The Digital Drybath provides a temperature range of Ambient +5°C to 130°C that is adjustable in 0.1°C increments. The timer can be set for up to 999 minutes. Each dry bath is supplied with an insulated block lifter to remove hot blocks. INCLUDED: The Gilson 36110500 4-Block Digital Dry Bath includes: - Insulated Block Lifter - Power Cord - Operator's Manual - 2 Year Manufacturer's Warranty

Eppendorf 022653008 Aerosol-Tight Rotor FA-45-24-11 with AT lid The Eppendorf 022653008 Aerosol-Tigh (more)t Rotor FA-45-24-11 with AT lid for 1.5/2 mL Tubes, 24-Place is for use with microcentrifuge models 5424. The rotor has a maximum rotational speed of 15,000 RPM and is used for centrifugation of standard application lab samples. The rotor has a 24-place tube array that holds 1.5 mL/2.0 mL tubes, and includes a certified aerosol-tight lid for working with hazardous samples. Both the rotor and lid are autoclavable at 121 degrees C for 20 minutes. This fixed-angle rotor is an accessory for use with Eppendorf centrifuge model 5424, which spins biological lab samples at high speeds to separate cellular material into component parts.

Dimensions (WxHxD): 900 x 600 x 580 mm

This Digital Instruments Signal Access Module lll was removed from a university lab where it was sur (more)plus to requirements. The lab confirmed the unit was working when last used, but it has not been tested at our facility. It is in reasonably good cosmetic condition but has some marks from use. System comprises; 6 x pairs low voltage inputs to the nanoscope controller (data signal)12 x pairs low voltage inputs from the nanoscope controller (control signals)6 x pairs of high voltage outputs from the nanoscope controller (piezo drive signals)6 x pairs of inputs to the sensor4 x pairs outputs from the sensor2 x ports to microscope controller1 x port to microscope1 x port to sensor

Do you need a balance that not only determines weight with impressive accuracy, but also performs a  (more)digital audit, responds to your voice commands and sends you light messages? If so, learn about the functionality of the ELLIPSIS series of balances: Digital Weighing Auditor Ensures that your balance is ready for use. It enables air buoyancy compensation in real-time. What is more, it informs about the need for a balance inspection or a periodic audit of the balance’s accuracy and sensitivity. 10-Inch Display Bigger screen – 10’’ – means more information in one place. On the new ELLIPSIS terminal, you will see up to 3 screens, widgets, graphs, statuses, notes, handy measurement history. Uncompromising User Verification For the first time ever, the balance will verify the user using a password, RFID card, fingerprint reader, facial recognition mechanism, or any combination of these. Ambient Light – An Innovative Way for the Balance to Communicate With the User The light colour will tell you about status, process results, procedures, or alerts. Hotspot Use the balance on any device connected to it. This can be a smartphone, tablet, or computer. RFID ELLIPSIS works with RFID tags* that can be used to tag your products or formulation ingredients in the database. They can also be used to identify a user. Live Note – Note Down Your Conclusions It’s the first time you can add a voice memo to a measurement series or procedure report. If you prefer to write it down, ELLIPSIS allows you to add a text note. Handy Library This is where a series of recent measurements or a report ready for digital signature, according to 21 CFR Part 11, can be found. Widgets Prepared to display what you need most at any given moment. Automatic Leveling of the Balance ReflexLEVEL System Instead of manually leveling your scale - level it automatically. The ReflexLEVEL System saves you time and gives you maximum precision in your measurements. Smart Min Weight The balance displays whether the value of the weight you want to weigh is below or above the minimum weight threshold. Fully Antistatic Weighing Chamber Do you have an electrostatic sample that cannot be weighed? The ionizer will neutralize its electrostatic charge. How will you get an even more accurate weighing result? This will be ensured by a special antistatic glass coating that compensates for electrostatic charges on the sample and laboratory accessories. 21 CFR Part 11 Do you work in the pharmaceutical industry? Do you need a digital signature? We are offering the laboratory balance which as a standalone fully meets the requirements of 21 CFR Part 11/ EU GMP Annex 11. - Full data security - Electronic signatures - Validations - Electronic records - Audit trails Modbus TCP/IP is one of the most popular communication protocols in industrial automation. Implementing it in the 5Y balances and CY10 scales makes the devices of this series friendly to automation integrators. A balance or scale in a Modbus system is a slave device and performs tasks specified by the master device which is most often a PLC. Protocol Modbus TCP/IP in the 5Y balances and C10 scales enables, among other things, the realization of mass readout, zeroing and tare functions of the device, as well as tare settings and MIN and MAX thresholds. Two-point adjustment Adjacency, which takes place at two measurement points instead of one, improves measurement precision over the full weighing range. And what does this mean for you? More accurate measurement. * RFID ISO/IEC 14443 Type A, 13.56 MHz

IKA INC 125 FC Digital Cooled Incubator Temp. Range -5°C to 100°C Temp. Uniformity ±0.3 K Chamber Vo (more)lume 125 l Features - Precise Temperature Control: Wide range from -5 °C to 100 °C. - Uses natural refrigerant R290. - 125 liters, with space for up to six grid shelves. - Decontamination mode, easy-to-clean surfaces, and defrosting function. - Excellent stability and uniformity, adjustable fan, and superior insulation. - Large LCD display, timer functions, and intuitive controls. - Stackable units, optional door locks, and various shelves. The IKA INC 125 FC Digital Cooled Incubator is an ideal solution for microbiological applications, offering precise temperature control from -5 to 100 °C. It features powerful compressor cooling technology and uses the environmentally friendly refrigerant R290. With a capacity of 125 liters, it can accommodate up to six grid shelves, providing ample space for various applications. The incubator ensures hygienic working conditions with a decontamination mode at 100 °C, easy-to-clean interior surfaces, and a defrosting function. Optimal temperature control is achieved through excellent stability and uniformity, an electronically adjustable fan, and superior insulation. Simple and intuitive operation is facilitated by a large LCD display, timer functions, and a temperature-controlled timer. The incubator also offers versatile accessories and services, including stackable units, optional door locks, and available installation and operation qualifications.INCLUDED: The IKA INC 125 FC Digital Cooled Incubator includes: - INC 125 FC digital Incubator cooled - IO T 2.10 Wire grid tray, chrome plated (2 pcs.) - Tilt protection / assembly material (2 pcs.) - USB A-B cable - Calibration certificate at 37 °C & 10 °C - Hose adapter (for hoses Ø 9-11 mm) - Power Cord - Operator's Guide - Two Year Manufacturer's Warranty

Eppendorf F-45-30-11 Fixed Angle Rotor for 5804/5810 (022637002) Eppendorf F-45-30-11 Fixed Angle Ro (more)tor never used, new in opened box. Capacity of 30 x 1.5/2ml. The F-45-30-11 is used in the Eppendorf 5804, 5804R, 5810, and 5810R Benchtop Centrifuges. INCLUDED: The Eppendorf F-45-30-11 Fixed Angle Rotor for 5804/5810 (022637002) includes: - Full 1 Year Parts and Labor Warranty Eppendorf F-45-30-11 Rotor SpecificationsMax Speed14,000 RPMMax RCF20,800 x gMax Capacity30 x 1.5/2 mL