Centrifugation equipment

This Sorvall SLC-4000 Fixed Angle Centrifuge Rotor PTI F9S-4x1000 was removed from a university lab  (more)where it was surplus to requirements. The unit is in good cosmetic condition with only minor marks from use, though it has not been tested and will need to be inspected by a qualified engineer before it is used again. Specs;7,000rpm9,220 x gHolds: 4 X 100ml

This Thermo Shandon Cytospin 4 Cytocentrifuge was removed from a university lab where it was surplus (more) to requirements. The unit has been inspected by a service engineer who fitted new plastic hinges fitted. The repair isn't perfect, but it's functional It also appears to have a battery error. There is a battery soldered to the main board, it probably needs replacing. The unit shows an error 4 code when first switched on but if you press stop the code goes away, and the unit starts up normally. The error relates to a discharged battery. The unit is in otherwise full working condition and is in good cosmetic condition with just the marks from the repairs.

Sorvall Legend T Benchtop Centrifuge with 4600rpm Rotor This was removed from a university lab where (more) it was surplus to requirements. The unit powers up and is in full working order. It is in reasonably good cosmetic condition with marks from use. Included are; 1x Sorvall RotorP/N: 75006445S/N: 002518 4x Sorvall swinging bucket Heraeus AdaptorsP/N: 75006449

Sigma 4K10 Refrigerated Centrifuge This item was removed from a university where it was surplus to r (more)equirement. It is in good cosmetic condition internally and externally. It powers on and is in good working order when set to low temperatures, it did however remain at 26˚c when set to 37ºc. The Unit comes with 3 Different Rotors No. 1: Sigma Rotor Swing-out rotor Nr. 11140-G=960 g-5500/min-4 x 284 Bucket-12 x sample holders (3 sets of 4 ) No. 2: Sigma Rotor Nr. 12167-13000/min-G=86g No. 3: Sigma Angle Rotor 12166-No info.

Beckman Centrifuge Rotor SW-28 28,000rpm This was removed from a university lab where it was surplu (more)s to requirements. It is in good cosmetic condition with minor marks. Beckman SW-28 28,000 rpm Serial No. 05U 10874Six Beckman swing buckets SW 28 38.5ml

This item has just arrived in our stock. Please enquire for further details.

GE Healthcare / Cytiva S-2000 - Centrifuge/Therm. Module Lab This item was removed from a university (more) where it was surplus to requirement. It is in excellent condition, we are unable to test it further due to the nature of the item. Item No/Product Name: 8800.O/Part No: 851 1332.Serial No: 239529.

Hettich Rotina 380 R This item was removed from a university where it was surplus to requirement. I (more)t is in good cosmetic condition both internally and externally. The item powers on and works as intended, it has been temperature-tested. (Thermometer not included) The Unit comes with the following Rotors: Hettich 1760 Rotor2 x 500 g4000 RPMS/N - 007162 Hettich 1798 Rotor4 x 300 g4000 RPMS/N 006337Buckets - 4 x Hettich 5092 005159

Beckman Coulter JLA 8.1000 Fixed Angle Rotor This item was removed from a university lab where it wa (more)s surplus to requirements. The unit is in good condition with minimal wear. No further testing has been conducted. Includes:- 6 x Buckets Specifications:- Max RPM: 8,000 - Model: JLA 8.1000 - Serial No.: 01U 858

This Piramoon PTI Fiberlite F8S-6x1000Y 8000rpm Centrifuge Rotor was removed from a university lab w (more)here it was surplus to requirements. The unit is in reasonably good cosmetic condition but has some scuff marks around the thread. It has not been tested at our facility.

This Eppendorf Refrigerated Laboratory Centrifuge 5804-R was removed from a university lab where it  (more)was surplus to requirements The unit has had a replacement actuator and gas strut fitted by a service engineer who then fully tested the unit. Speed tested to 3600rpm (rotor not included). It was then temperature tested with a digital thermometer (not included) 37ºC our thermometer showed 34ºC.4ºC our thermometer showed 1.0ºC.-9ºC(min) our thermometer showed -5.0ºC. We would suggest that it was the probe placement that caused the temp readings to be a bit inaccurate.

Beckman Coulter JS-5.3 Rotor & Buckets Lab This item was removed from a university where it was  (more)surplus to requirement. It is in good used cosmetic condition. Included are the following: 1 x Beckman Coulter JS-5.3 Rotor 4 x Beckman Coulter Bucket

Thermo Electron Heraeus Multifuge 4 KR Refrigerated Centrifuge with Rotor This was removed from a & (more)nbsp;lab where it was surplus to requirements. The unit has been fully tested and is in full working order up to 4400rpm. It is in good cosmetic condition but has a crack in the lid viewing window. It does not affect the operation. Included with it are; Sorvall Heraeus Rotor75006476Max 4400 rpm 4 x Sorvall Heraeus Buckets75006477 FMax 4400 rpm

FisherBrand GT 1R Centrifuge w/ TX-150 Swinging Bucket Rotor Lab This item was removed from a univer (more)sity where it was surplus to requirement. It is in good cosmetic condition and working order, it has been tested to its MAX (4350RPM) This item also includes the following: Thermo Scientific TX-150 Swinging Bucket RotorMax speed: 5000RPMweight class: GSerial#: 75005701

Heto Maxi Dry Plus System With Vacuum Centrifuge + Drywinner Freeze Dryer This was removed from a un (more)iversity lab where it was surplus to requirements. The system powers up and is in good working order. It is in reasonably good cosmetic condition with marks from use. Max RPM-1800 Includes 2x rotors/tube holders. One holds 4-5ml tubes and the other 12-15ml tubes. Centrifuge model number- VR maxi-1Centrifuge serial number- 804040235 Freeze dryer model number- CT/DW 110Freeze dryer serial number- 804050097 Maxi dry model number- MAXI-DRY PLUSMaxi dry serial number- 804060037

Sorvall Discovery 90 SE Floor-Standing Centrifuge Lab This item was removed from a university where  (more)it was surplus to requirement. It is in good cosmetic condition and powers on, it has been tested at 70,000rpm using a Beckman 70.1Ti rotor. The rotor is not included.

This  Beckman Coulter Optima LE-80K Ultracentrifuge was removed from a university lab where it  (more)was surplus to requirements. The unit powers up and is in good working order. It is in good cosmetic condition with minor marks. Included with it are; 1x Beckman Coulter 6 bucket SW 28 RotorMax RPM: 28000 6x Beckman Coulter SW 28 swinging buckets/50 ml tube adapter 1x Beckman Coulter rotor bag 4x Boxes of Beckman Coulter Pollyallomer Centrifuge Tubes 14 x 89 mm 2x Boxes of Beckman Coulter Ultra-Clear Centrifuge Tubes 25 x 89 mm 1x Beckman Coulter Spincote Lubricant 1x Beckman Coulter Silicone Vacuum Grease 1x Beckman Coulter Release tool 1x Beckman Coulter Rotor Safety Manual 1x Beckman Coulter Rotors and Tubes instruction CD

This Beckman Coulter Avanti J-E Centrifuge was removed from a university lab where it was surplus to (more) requirements. The unit powers up but we were unable to test it further as we do not have a compatible rotor in stock. We think it requires a rotor with a magnet fitted. It is in good cosmetic condition with minor marks.

Beckman Optima L-90K Ultracentrifuge Lab This was removed from a university lab where it was surplus (more) to requirements. The unit has been professionally serviced, it is in full working order, and the full report is available on request. It is in good cosmetic condition with minor marks. A rotor is not included.

Beckman Coulter Optima L-90K Ultracentrifuge This was removed from a university lab where it was sur (more)plus to requirements. The unit has been professionally serviced and is in good working order. A full report is available on request. It is in good cosmetic condition with minor marks.

Beckman Avanti Model J-25 Refrigerated Centrifuge This was removed from a university lab where it wa (more)s surplus to requirements. The unit powers up and has been tested with a JA20 rotor (Not included). It worked well up to the tested speed of the rotor's max of 20,000rpm. The refrigeration works well. It is in reasonably good cosmetic condition with some minor marks.

Thermo Scientific Sorvall Legend XFR Centrifuge This item was removed from a university where it was (more) surplus to requirement. It is in good cosmetic condition both internally and externally. The item powers on and works as intended, it has been temperature-tested. (Thermometer not included) Also includes the following: Thermo Scientific 75003607 TX-750 Rotor & 75003608 750mL Round Buckets (set of 4)Max Speed: 4700 rpmMax RCF:4816 x g

Cepa Z-41 High Speed Centrifuge This was removed from a university lab where it was surplus to requi (more)rements. The unit powers up and is in working order. It runs on a timer delay so takes a few moments to start working. It is in good cosmetic condition.

Beckman Optima XL100K Ultracentrifuge Lab This item was removed from a university where it was surpl (more)us to requirement. It is in good cosmetic condition and in good working order. Also includes the following: Sorvall AH-629 Rotor RPS40T-832 Rotor Neither rotor includes the vial buckets.

Beckman Optima L-100 XP Ultracentrifuge Lab This item was removed from a university where it was sur (more)plus to requirement. It has been professionally serviced, is in full working order, and is in good cosmetic condition. The full report is available on request. Also includes: 1 x Service Book 1 x Log Book 4 x Foot Plates

Beckman Coulter Optima MAX-XP Ultracentrifuge This item was removed from a university where it was s (more)urplus to requirement. This unit has been professionally serviced and is in full working order. It is in excellent cosmetic condition with minor marks. There is no rotor included.

Rousselet Robatel DRC 60 VX AY 1Sman Decanting Centrifuge This was removed from a laboratory where i (more)t was surplus to requirements. The system has not been tested as it has been disassembled to some degree.

Rousselet Robatel DRC 60 VX AY 1Sman Decanting Centrifuge This was removed from a laboratory where  (more)it was surplus to requirements. The system has not been tested as it has been disassembled to some degree.

Biosafe Sepax S-100 Lab This item was removed from a university where it was surplus to requirement. (more) It is in very good cosmetic condition and powers on, we are unable to test it further at our facility.

MARSHALL Select MS-CE6000 Benchtop Centrifuge, 6,000 RPM Maximum Speed 6,000 RPM Maximum RCF 4,387  (more)x g Maximum Capacity 4 x 500ml Features - All-metal construction with multi-layer explosion-proof design for safety and durability - Maintenance-free DC brushless motor ensures stable, low-noise operation - 5-inch LCD touch screen with multilingual support, including customizable options - Electromechanical integration door lock and food-grade silicone sealing for safety - Advanced safety features: self-test, blocking, overspeed, and overtemperature alarms - User-friendly interface with intuitive operation and real-time parameter display - Multiple user-defined program settings with memory for the last used program - Supports a variety of rotors and adapters for 0.2 ml to 750 ml tubes - Compact dimensions make this centrifuge suitable for benchtop use The MARSHALL Select MS-CE6000 Benchtop Centrifuge offers a robust and reliable solution for laboratory centrifugation needs. With a maximum speed of 6,000 RPM and a maximum RCF of 4,387 x g, it can accommodate up to 4 x 500 ml samples, making it versatile for various applications. Its all-metal construction with a multi-layer explosion-proof design ensures operator safety and durability. Driven by a maintenance-free DC brushless motor, the centrifuge provides stable, low-noise operation at less than 65 dB(A). The user-friendly interface features a 5-inch LCD touch screen with support for multiple languages. It offers electromechanical integrated door locking for enhanced safety and a food-grade silicone sealing ring to prevent aerosol overflow. The centrifuge includes advanced safety features such as self-test, blocking, overspeed, and overtemperature alarms. Its design supports various angle rotors and adapters for 0.2 ml to 750 ml tubes, making it adaptable to diverse laboratory needs. Additionally, the system allows for user-defined programs and remembers the last used settings for convenience, with timer settings from 1 second to 99 minutes and 59 seconds. Overall, the MARSHALL Select MS-CE6000 is a versatile and secure choice for laboratories seeking efficient and reliable centrifugation. INCLUDED: The MARSHALL Select MS-CE6000 Benchtop Centrifuge, 6,000 RPM includes: - Power Cord - Operator's Manual - Manufacturer's Documentation - 1 Year Manufacturer's Warranty