Benchmark BSH100-1520 Block, 15 x 1.5ml or 2.0ml centrifuge tubes (conical)

Angular rotor for centrifuge F45-36-8 EPPENDORF New equipment in its original packaging The Eppendor (more)f F-45-36-8 fixed angle rotor is intended for use in the Eppendorf 5415D and 5415R centrifuges. Reference: F45-36-8 13200 rpm 36X0.5ml 16.110 x g With lid

Angular rotor for centrifuge Nr.12024-H SIGMA 15300 rpm 24X1.5 / 2ml For use with: Sigma 1-15PK, Sig (more)ma 1-15P, Sigma 1-16, Sigma 1-16K With lid

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Beckman Optima L-60 Floor Standing Centrifuge This item was removed from a university lab where it w (more)as surplus to requirements. The centrifuge powers on and is in good cosmetic condition. However, during testing, the display read the following message:"DRIVE", preventing it from running a cycle. Therefore, it is listed as Spares/Repair. There is no rotor included. Specifications:- Speed: 1,000 - 60,000 rpm - Temperature: 0˚C - 40˚C Model: Optima L-60Serial No.: L1M602 Rotational Counter: 417,132 x 10,000 rotations

This Eppendorf Refrigerated Laboratory Centrifuge 5804-R was removed from a university lab where it  (more)was surplus to requirements The unit has had a replacement actuator and gas strut fitted by a service engineer who then fully tested the unit. Speed tested to 3600rpm (rotor not included). It was then temperature tested with a digital thermometer (not included) 37ºC our thermometer showed 34ºC.4ºC our thermometer showed 1.0ºC.-9ºC(min) our thermometer showed -5.0ºC. We would suggest that it was the probe placement that caused the temp readings to be a bit inaccurate.

Eppendorf 5810R Refrigerated Centrifuge w/ A-4-81 RotorFeatures - Refrigerated centrifuge for temper (more)ature-sensitive samples - Maximum speed of 14,000 RPM and maximum RCF of 20,800 x g for efficient separation - Large capacity of up to 4 x 750 mL for high-throughput processing - Intuitive control panel with easy-to-use interface - Automatic rotor recognition for safe and efficient operation - Programmable memory for up to 35 user-defined protocols - Quiet operation for minimal disturbance in the laboratory - Compact design for space-saving installation - Comes with A-4-81 rotor for 4 x 50 mL conical tubes The Eppendorf 5810R refrigerated centrifuge features a brushless motor and an internal capacity of up to four 400 ml tubes or 16 microplates. These compact, benchtop centrifuges achieve remarkable throughput of up to 48 x 15 ml or 20 x 50 ml conical tubes. The 5810R centrifuge accommodates a variety of rotors to meet your application needs, including the popular rotors F-45-30-11, A-4-81, and A-4-62. This versatile centrifuge has a maximum speed of up 14,000 rotations per minute and a maximum g-force of 20,800 x g, making it the perfect benchtop centrifuge for just about any application. With a compact height of only 13 inches, the 5810R is perfect for use in close areas or under storage shelving. This Eppendorf centrifuge has dynamic temperate capability ranging from as cold as -9C to as hot as 40C. The 5810R is considered a stable centrifuge throughout the scientific community and can be used in applications ranging from separating cell lysates to creating DNA precipitations. The refrigerated centrifuge also features an onboard LCD display for rotation speed, time left in cycle, and internal temperature. Please Note: This centrifuge includes the A-4-81 Swing Bucket Rotor and Buckets, not the rotor, buckets, and adapters depicted in the photo above. The included rotor reaches a maximum speed of 4,000 RPM. Click Here to View Product Video INCLUDED: The Eppendorf 5810R Refrigerated Centrifuge w/ A-4-81 Rotor includes: - A-4-81 Rotor and Buckets - 1 Set of 15ml Adapters - 1 Set of 50ml Adapters - Operator's Guide - Power Cord - Full 6 Month Parts and Labor Warranty Eppendorf 5810R Centrifuge w/ A-4-81 Rotor SpecificationsMaximum Speed14,000 RPM (4,000 RPM with included rotor)Maximum RCF20,800 x g (3,220 x g with included rotor)Maximum Capacity4 x 400ml (4 x 250ml with included rotor)Temperature Range-9°C to 40°CTimer1 to 99 minutes, adjustable in 1 minute incrementsDimensions24 x 28 x 13 in.Weight218 lbs.Electrical Requirements120V, 50/60Hz, 20ACatalog Number (Centrifuge Only)022625101Comparison of ModelsSpecifications5424R w/ FA-45-24-115425R w/ FA-24x25427R w/ FA-45-30-115702R w/ A-4-385810R w/ A-4-625810R w/ A-4-815910 Ri w/ S-4xUniversal5920R w/ S-4x1000Max Speed (RPM)150001506016,220 (14,000 with rotor)440014,000 (4,000 with rotor)14,000 (4,000 with rotor)14,000 (4,500 with rotor)13,700 (3,700 with rotor)Max RCF (x g)211302130025,001 (20,817 with rotor)300020,800 (3,200 with rotor)20,800 (3,200 with rotor)22,132 (3,849 with rotor)21,194 (3,428 with rotor)Capacity24 x 2.0 ml24 x 1.5/2.0 ml, 10 x 5.0 ml48 x 1.5/2.0 ml (30 x 1.5/2.0 ml with rotor)4 x 100 ml4 x 400ml (4 x 250ml with rotor)4 x 400ml (4 x 250ml with rotor)4 x 1000ml4 x 1000ml (4 x 1000ml with rotor)Temperature Range-10°C to +40°C-10°C to +40°C-11°C to +40°C-9°C to +40°C-9°C to +40°C-9°C to +40°C-11°C to +40°C-11°C to +40°CTimer30s to 9:59h10s to 9:59h10s to 9:59h1 to 99 min1 to 99 min1 to 99 min10s to 99h 59m10s to 99:59hDimensions (WxDxH)9.30 x 12.60 x 8.94 in11.42 x 18.9 x 10.24 in12.6 x 21.3 x 10 in380 x 580 x 265mm24 x 28 x 13 in24 x 28 x 13 in28.3 x 25.9 x 14.5 in29.2 x 27.8 x 15.9 inWeight21 kg46.3 lb (21 kg)66.1 lb (30 kg)36 kg218 lbs218 lbs240.3 lb (109 kg)306 lbPower Requirements120V, 50-60 Hz120V, 50/60Hz, 3.2A, 360W120V, 50/60Hz, 4.6A, 550W120V, 50-60 Hz120V, 50/60Hz, 20A120V, 50/60Hz, 20A120V, 60Hz, 12A120V, 50/60Hz.comparison-table tr td:nth-child(7) { background-color: #fffacd; }

The N 840.3 FT.40.18 is a two-stage pump with an integrated “self-drying” system for automatic conde (more)nsate drain. The “SD” series is widely used in laboratories, especially when the vapors are humid and a clean and ecological vacuum is required. Typical applications are: vacuum ovens (for drying chemicals, drying biological samples, heat treatments), autoclaves for sterilizing instruments, containers, filters and textiles. Thanks to the use of anti-corrosion materials, it is possible to vacuum even corrosive products. The heart of the pump is the diaphragm with differentiated structure in PTFE, optimized to guarantee high performance with reduced dimensions and at the same time, long life even in heavy applications. When the humid gases are sucked in, it can happen that condensation forms in the pump head: consequently the performance decreases, considerably increasing the emptying time. To eliminate condensation, the 'drying system' then opens a solenoid valve that allows ambient air to enter the heads. Once the condensation has been eliminated, the solenoid valve closes and the pump sucks from the stove in full capacity. Over time, condensation could form again and then the cycle is repeated. The time interval between one cycle and the next can be adjusted as desired, as well as the duration of the air injection. Technical features Flow Rate (max.) 34 l / min Ultimate Vacuum (max.) 10 mbar (abs.) Pressure (max.) 1 bar (rel.) Permissible Medium Temperature 5-40°C Valve Material FFPM Diaphragm Material PTFE coated Pump Head Material PTFE Applications Rotary evaporation Vacuum oven Qualitative characteristics Clean operation, 100% oil-free Corrosion resistant PTFE / FFPM flow path Ideal for extremely aggressive / corrosive gases and vapors Compact, silent and reliable The self-drying system removes condensation without altering the vacuum level Maintenance free Download the data sheet for further information and accessories. NOT SURE WHICH VACUUM PUMPS YOU NEED? Try following our guide to KNF pumps: VACUUM PUMPS FOR THE LABORATORY Or download the KNF guide: THE IDEAL DIAPHRAGM PUMP FOR EVERY APPLICATION

This listing is for a Elmi Sky Line Shaker Thermostat . The unit is in full working condition and i (more)s ready for immediate release. The Elmi Sky Line Shaker Series is a high-performance line of orbital and rocking shakers, engineered for non-stop operation in a wide range of medical, chemical, and biological laboratories. These units offer exceptional flexibility, making them adaptable to different applications with a variety of optional accessories and attachments. The shakers come in multiple sizes and loading capacities, ensuring they can meet the specific needs of any laboratory environment. Key Features: High-Performance Operation: Designed for continuous, reliable use, ensuring stable and consistent results across various lab applications. Orbital and Rocking Motion: Provides uniform, controlled mixing, ideal for biological samples, chemical reactions, and cell cultures. Flexible Design: Compatible with a range of optional accessories and attachments to support different experimental setups. Variety of Sizes and Capacities: Multiple models are available, offering varying loading capacities to suit specific laboratory requirements. Non-Stop Operation: Built for extended use, ensuring continuous mixing and agitation for time-sensitive processes.

PHCBI CO2 Incubator Model MCO-170AICD-PE With Tray and Shelves Lab This item was removed from a univ (more)ersity where it was surplus to requirement. The unit powers up and is in good working order (thermometer not included).It has been professionally serviced, the report is available on request. It is in excellent condition internally and externally. This item features the following: 4 x shelves: 47 x 45 1 x Stainless Humidity Water Pan: 44 x 25 x 7cm

Stainless steel platform scale with four sensors No matter where you place the load on the platform, (more) the result will always be correct. This is due to the four sensors built into the platform. You will appreciate this especially when weighing an irregularly shaped object. It has been with us for years, and will stay for a long time to come The LCD display has accompanied us for long years. During this time it has proven its reliability. It guarantees the readability of the result from many angles and is energy efficient. Inner power No access to mains power? Power failure? No problem. Thanks to its internal rechargeable battery, the H315 scale works anyway (up to 7 hours). Power supply is available at an extra charge. As standard, the scale is equipped with a RS232 cable, to which you can connect most of the accessories from our range. Not just weighing But also parts counting, percent weighing, animal weighing and peak hold. The power of H315’s working mods. Do you require fast and repeatable weight measurement under difficult conditions? The H315 scale is made for that! Work as you like The PUE H315 terminal sits on a 3-meter cable that allows you to hang the terminal on the wall. This allows you to arrange your weighing workplace in many ways. The power of steel The use of stainless steel guarantees you a long life for the scale. It is not afraid of contact with moist objects or accidental splashes. The membrane keyboard is another argument in the discussion of the water resistance of this scale. If you need a dual-range scale, we can make one for you at an extra cost.

Balance of the AS X7 series is an advanced analytical weighing device of the SYNERGY LAB line. The A (more)S X7 is exceptional due to a range of modern constructional and system solutions that guarantee reliability, precision and accuracy of measurement, and make everyday operation easy. Ergonomic Mechanical Design The latest AS X7 analytical balance features spacious weighing chamber, and the open-door clearance facilitates easy access to the weighing pan. With this it is possible to use laboratory glassware of various sizes. New aluminium base is a guarantee for weighing system stability. Dual-CLICK system allows tool-free assembly and disassembly of the weighing chamber, and a special design of guides for weighing chamber panes (no rims) makes keeping the device clean convenient. Innovative construction solutions increase balance durability and reliability in long-term operation. Colour Touch Screen The latest generation touch panel of 7” diagonal stands for comfort of operation, even when you have laboratory gloves on. The AS X7 analytical balances guarantee simple and intuitive communication due to wide selection of widgets. The widgets can be freely configured in accordance with user needs. Screen customization favours access to information and results directly from the home screen. The user can configure a complete set of buttons and assign it to a particular operation mode. He(she) can also define info and text fields. LevelSENSING System The in-built sensors measure tilt, and display graphic message on the weighing device screen. In accordance with GLP and GMP, the LevelSENSING system simplifies the adjustment, ensures an ongoing control of the level and informs about deviations. Internal Adjustment Modernized internal adjustment system guarantees accurate indications in extremely unfavourable conditions. SMARTLab AS X7 balances are equipped with a SMARTLab system of an extensive functionality. It ensures support and supervision over the mass measurement process and reduces hazard of error caused by so called „human factor”. Automatic adjustment Regardless of external ambient conditions, the automatic internal adjustment system guarantees 100% efficiency in eliminating balance sensitivity deviations. Sensors Touch-free operation and programmable sensors facilitate daily work and reduce the range of actions performed during the weighing procedure. Alibi memory Data safety is assured with the ALIBI memory, which is integrated into AS X7 balances. The memory enables record of up to 500 000 weighings and guarantees continuity of data collection over a long period of time. Wi-Fi Remote control of the balance via devices, operation of which is based on Android, IPhone, Windows10 systems. Data control Accessing information in the balance depends on the user's permission level. The administrator can manage three different permission levels. Automatic Weighing Records Reports on processes and partial weighings can be generated and sent for archiving via the USB to external devices. Ambient Conditions Monitoring Communication with RADWAG thermo-hygro-barometer allows monitoring of ambient conditions such as temperature and atmospheric humidity. Databases Information system of the AS X7 balances is based on 7 databases that enable operation of many users with numerous products, all the stored data can be subjected to analysis. Weighing data is recorded in 7 databases: • Operators (max 100 entries), • Products (max 5 000 entries), • Weighings (max 50 000 entries), • Packaging (max 100 entries) • Formulations (max 100 entries), • Customers (max 1000 entries), • ALIBI memory (max 512 000 weighings). Additionally it is possible to create formulation reports (max 500 reports). Communication Interfaces The functionality of AS X7 balances can be expanded using the following communication interfaces: USB-A, USB-B, RS 232, DB9 tara/print, Ethernet, Wi-Fi. The additional USB port located on the front of the balance enables easy and fast communication with the USB flash drive, it is possible to connect additional devices via this port too. AS X7 balances are equipped with Kensington Lock, which allows to secure the device against theft. Additional option: Under-pan weighing Weighing instruments purchased after 15th February 2023 will allow under-pan weighing at any time after the purchase. All you need to do is just to order a dedicated hook. THBR 2.0 System Cooperation with THBR 2.0 System for ambient conditions monitoring.

IKA RH Digital Magnetic Hotplate Stirrer Stirring Quantity Max (H20) 15 L Speed Range 100 - 2,000 (more) rpm Working Temperature 50 - 320 °C Features - Digital display of temperature and speed - Soft-start of stirring motor - Strong magnetic field and wide speed range for volumes up to 15 liters - Error code display - Easy operation with touch keypad Innovatively designed digital magnetic stirrer with heating.Bushing according to DIN 12878 for connecting an electronic contactthermometer, such as the ETS-D5. Highly accurate temperature control ispossible with sensor placed directly in the medium. A high heat output of 600watts and stainless steel compound hot plate ensures rapid heating. Adjustablesafety temperature from 100 to 360 °C.