Benchmark BSH100-15HL Block, 15 x 1.5ml Centrifuge Tubes for Dry Bath with Heated Lid

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

This Sanyo MSE Harrier 18/80 Refrigerated Centrifuge was removed from a university lab where it was  (more)surplus to requirements. The unit powers up and is in reasonably good cosmetic condition with marks from use. It is in full working order. The rotor spins up to 6000rpm and the refrigeration works and has been tested at 4˚C and -9˚C. MSE Rotor 43124-141Max RPM - 6000 4 x Buckets4 x Yellow Adaptors hold 1 x 50ml tube each

Benchmark MC-24R Refrigerated High Speed Microcentrifuge without Rotor Speed Range 200 to 13,500 RPM (more) Max. Capacity 8 x 5ml Temperature -20°C to +40°C Features - The next generation touch control panel is user-friendly even with gloves - High-speed centrifugation reaches up to 13,500 RPM and 16,800 xg - Real-time RPM and RCF conversion ensures accuracy - Program storage allows saving up to 99 programs - Unique status indicator light shows the running, standby, or completed status - Compact design with a powerful motor drive reaches speeds up to 13,500 RPM - Refrigeration cools down to 4°C in less than 10 minutes - Quiet operation even at full speed Benchmark’s flagship MC-24R refrigerated microcentrifuge features a next-generation touch control panel, high-speed centrifugation (up to 13,500 rpm / 16,800 xg), and compatibility with the unique COMBI-Rotor™ (sold separately), which accepts both standard microtubes (1.5/2.0 ml) and PCR tubes/strips (0.2 ml), eliminating the need for a dedicated PCR strip/tube rotor. These features make it an ideal choice for any molecular biology laboratory. The MC-24R offers an optional hermetically sealed rotor and a four-place PCR strip rotor. It also includes adjustable acceleration/deceleration rates, real-time rpm and rcf conversion, program storage for up to 99 runs, and a status indicator light, which informs the user if the unit is running, in standby, or has completed a run. Compact and convenient, the MC-24R is perfectly suited to be the workhorse of any lab. INCLUDED: The Benchmark MC-24R Refrigerated High Speed Microcentrifuge without Rotor includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Benchmark C2212 MyFuge 12 Plus Digital Mini Centrifuge w/ Combination Rotor The unique rotor design  (more)of the new MyFuge 12 Plus eliminates the need to switch rotors (or use a separate centrifuge) when changing between microtubes and PCR strips. The included, COMBI-Rotor allows for simultaneous centrifugation of up to 12 microtubes and/or 4 PCR strips.In addition, the MyFuge 12 Plus features a large digital display with adjustable speed (up to 7,000 rpm) and a digital timer. With built in rcf conversion, speed can be set/displayed in rpm or rcf.The MyFuge 12 Plus combines power with intuitive functionality making it the perfect companion in any laboratory.INCLUDED: The Benchmark C2212 MyFuge 12 Plus Digital Mini Centrifuge w/ Combination Rotor includes: - Power Cord - COMBI Rotor - Two Year Manufacturer's Warranty

Water bath from 25°C to 100°C for the laboratory The water baths of the LAUDA Hydro series are the i (more)deal tools for any laboratory application, whether biological, medical or biochemical and guarantee a homogeneous temperature distribution without overheating problems. High quality stainless steel and thoughtful design, provide the ideal depth and opening for any application with bathroom volumes from 4 to 41 liters. All water baths offer a temperature range up to 100°C, with a temperature stability of ±0.1K, so that applications even in the boiling range are possible. A TFT color display ensures intuitive operation with temperature display in °C and °F. Application examples - Preparation of cellular, biological or medical samples - Microbiological test incubation - Thawing of the samples - Conducting chemical reactions Notable features - Three timer functions for the user - Electric resistance inside the tank - Direct temperature control for fast and precise heating - Visual and acoustic alarm in case of lack of water, low / high temperature and sensor break - Digital and electromechanical safety system - Lid designed to prevent condensation from dripping onto samples - Exhaust valve on all models Standard equipment - Lid and drain tap in heat-insulating double-walled stainless steel Accessories available Water level regulator. Highest quality materials: tank interior, lid, sieve and heating element made of stainless steel. Heat insulating lid in stainless steel, double walled with internal curvature to guide the condensate. Dump valve on all Hydro Lauda models. Simple control panel with large TFT display with extensive information; change settings and navigate quickly and easily. Optical and acoustic alarm for low water level and over/under temperature as well as sensor breakage/short circuit. Optimized space, safety and comfort of use. Connection for water level regulator (available as accessory). Recommended accessories - Water level regulator. Thanks to this accessory, the loss of water inside the instrument (through evaporation) is compensated and the water level is kept constant. Furthermore, it allows use at temperatures below ambient temperatures, with a minimum of approx. 3°C above tap water temperature.

The DTP tablet presses benefit from the simple adjustment of all key parameters, low noise, and safe (more) operation. They are compact machines that are light in weight for their class yet apply a hefty 50 kN of pressure to produce top quality, pharmaceutical grade tablets that are highly consistent in weight. Thanks to their feeder mechanisms, these tablet presses are extremely efficient in their use of raw materials. The DTP 25 is capable of producing 3,600 per hour, with a maximum diameter of 25 mm. Designed for pressing dry powders and granular material into tablets, these tablet pressing machines are widely used in the pharmaceutical, chemical, electronic, foodstuff and other industries, and represent a cost effective solution for any application that requires moderate quantities of high quality tablets. Dies: 1 Maximum diameter of tablet: 25 mm Maximum pressure: 50 kN Maximum depth of fill: 20 mm Max tablets per hour: 3,600 Tablet thickness: 8 mm Dimensions (WxDxH): 580 x 500 x 830 mm Weight: 226 kg

Infors Shaking Incubator Model-AI 72 Lab This item was removed from a university where it was surplu (more)s to requirement. It is in reasonably good cosmetic condition, but the door does not remain shut. The unit powers on, however, when setting the desired temperature, it remains at ambient temperature and does not raise to lower. Therefore, it is listed as Spares/Repair.

Steelco LAB 500 SCDL Laboratory Washer This was removed from a university lab where it was surplus t (more)o requirements. The unit powers up and is in good working order. It is in good cosmetic condition with minor marks from use.

Beckman Coulter Optima XPN-100K Ultracentrifuge Lab This item was removed from a university where it (more) was surplus to requirement. It is in very good cosmetic condition and full working order. It has been professionally serviced, the full report is available on request. This item was tested with an in-house rotor (Beckman 70.1Ti). This rotor is not included in the sale.