Benchmark BSC1006-B Blue mini-centrifuge with 2 rotors

Max speed: 18000 rpm Max RCF: 23542 x g Max volume: 4x 145 ml Speed range: 200 – 18000 rpm Temperatu (more)re range: -20°C to 40°C Running time: 59 min 50 sec (10 s increments), 99 h 59 min (1 min increments) Dimensions (WxHxD): 400 x 360 x 700 mm Weight: 60 kg Equipped with: 1x Hermle 221.18 fixed angle rotor (max 12000 rpm) 6x Adapter 50 ml falcon tube 6x Adapter 15 ml falcon tube

BECKMAN COULTER JLA-10.500 Aluminum Angle Rotor Max: 10,000 rpm, 18,600 x g Capacity: 6 x 500 mL Com (more)plete, with 6 buckets K-Factor: 2,850 Nominal Capacity: 3,000 mL For use with Avanti J-Series and J2-Series centrifuges (except J-21 Series)

SIGMA 2-6 centrifuge with rotor 11030 Benchtop centrifuge 2-6 Max. rotation speed: 4000 rpm Weight w (more)ithout rotor: 20.4 kg Power consumption (centrifuge): : 130 W With swing-out rotor 11030 Max: 4 x 350g 173/H 4 buckets of 50ml 13034 4 adapter 14030 of 4 tubes 10 - 15 ml The lid cylinder is new, changed on 19-11-24 Buckets in average condition. The adapters can no longer be removed from the buckets Year of manufacture: 2008

This Sorvall RC-5C Plus Floor-Standing Centrifuge was removed from a university lab where it was sur (more)plus to requirements. The unit powers up, but shortly after running it produces error code 7 preventing it from being tested, therefore this item is sold as Spares or Repairs. Error 7 = REFRIGERATION SYSTEM FAILURE There was no apparent drop in chamber temperature thirty seconds after the refrigeration system started to cool. Notify your Thermo Field Service Engineer.

Thermo Scientific Fresco 21 Refrigerated Benchtop Centrifuge This item was removed from a university (more) laboratory where it was surplus to requirements. The centrifuge is in very good used cosmetic condition, showing signs of general use.It powers on and operates as expected, with temperatures tested successfully. Testing Details:- Tested at -9ºC and 37ºC, both of which were achieved in a reasonable amount of time. - Motor spindle has been greased for optimal performance. Specifications:- Model: Fresco 21 - Manufacture Date: 2009 Includes:- User Manual

This Miltenyi Biotec autoMACS Cell Separator was removed from a university lab where it was surplus  (more)to requirements. The item powers on but we were unable to test it further. The item is in a reasonable, used cosmetic condition.

Jones Chromatography Model 7971 Column Heater This item was removed from a university where it was s (more)urplus to requirement. It is in good cosmetic condition and powers up, we are unable to test it further at our facility.

Radwag Laboratory Holders have been designed for faster and more convenient weighing. They ensure pe (more)rfect and secure fixing of small vessels, both typical and non-standard shapes. Product highlights: Full ergonomics of weighing Direct dosing of a sample into a vessel High work efficiency, lower costs ( minimizing possible loss of samples resulting from moving) Direct dosing of samples into various vessels (test tubes, round flasks, flat flasks, plastic test-tubes, titration vessels) Laboratory Holders are compatible with all Radwag analytical balances. Intended use: round flasks - 50, 100 and 250 ml

MA X7.A moisture analyzers are hi-tech measuring instruments intended for quick determination of rel (more)ative moisture content, dry mass content and other parameters in samples of different substances. MA.X7.A series is equipped with innovative system: the drying chamber can be opened and closed automatically using button or proximity sensors. Such solution allows: Maintaining moisture analyzer clean – operator does not touch moisture analyzer’s housing. Removing any shocks caused by manual closing of the chamber – the chamber closes automatically and always with the same intensity. Achieving high repeatability of opening and closing the drying chamber. Enhancing drying process automation. Enhancing safety of operation by eliminating contact with hot components of drying chamber. Improving operation ergonomics. MA.X7.A series features user-friendly colour touchscreen. Free configuration of the control panel can be done by means of hotkeys, customizable information fields and programmable labels. Drying process can be carried out for any temperature and – thanks to databases – particular drying process may be set for a specific product. Highlights of X7 Series moisture analyzers: Automatic opening and closing of the drying chamber 7” capacitive colour touchpad Modern interface Uncomplicated, intuitive operation Programmable display Drying profiles (standard, mild, step, fast) GLP/GMP printouts-reports Repeatable and customized applications Work optimization due to the use of halogen lamps Capacity and temperature MA.X7.A maximum capacity ranges from 50g/0.1mg to 210g/0.1mg. Moisture content is measured with the 0.01% accuracy (0.001 % for samples bigger than 1.5g). The maximum drying temperature is 160˚C (there is an optional moisture analyzer with 250˚C maximum temperature). An additional element for moisture analyzers that improves their functionality is a water vapour permeability determination set used in tanning industry for determining hygienic properties of leather. Databases: Information system of X7 series moisture analyzers is based on 8 databases, allowing many users to operate product database comprising many samples. Collected measurements may be subjected to subsequent analysis. Collected data is registered in 8 databases: Products (up to 5000 products) Users (up to 100 users) Packaging (up to 100 packagings) Customers (up to 1000 customers) Drying programs (up to 200 drying programs) Drying process reports (up to 5000 drying process reports) Ambient conditions (up to 10000 records) Weighings (up to 50000 records) The results The results obtained using the moisture analyzer (the final result of the drying process): % M – the mass loss in %; displays the mass change recorded during the drying process, expressed as a percentage, % D – the dry mass obtained during the drying process, expressed as a percentage; the result is the portion of the sample that remains on the weighing pan after the moisture has evaporated, % R – the ratio of moisture content to dry mass, obtained during the drying process, expressed as a percentage; the result is the portion of the sample that evaporated during the drying process, g – the sample mass after drying. Interfaces USB interface ensures quick transfer and copying of any results of your work (measurements, reports, databases) to a computer or other moisture analyzer. Remote access to the moisture analyzer allows for online data management. Cooperation with E2R allows for external data management which in turn increases the efficiency and results to the maximum.

MA X2.A moisture analyzers are hi-tech measuring instruments intended for quick determination of rel (more)ative moisture content, dry mass content and other parameters in samples of different substances. MA.X2.A series is equipped with innovative system: the drying chamber can be opened and closed automatically using button or proximity sensors. Such solution allows: Maintaining moisture analyzer clean – operator does not touch moisture analyzer’s housing. Removing any shocks caused by manual closing of the chamber – the chamber closes automatically and always with the same intensity. Achieving high repeatability of opening and closing the drying chamber. Enhancing drying process automation. Enhancing safety of operation by eliminating contact with hot components of drying chamber. Improving operation ergonomics. MA.X2.A series features user-friendly colour touchscreen. Free configuration of the control panel can be done by means of hotkeys, customizable information fields and programmable labels. Drying process can be carried out for any temperature and – thanks to databases – particular drying process may be set for a specific product. Highlights of X2 Series moisture analyzers: Automatic opening and closing of the drying chamber 5” capacitive colour touchpad Modern interface Uncomplicated, intuitive operation Programmable display Drying profiles (standard, mild, step, fast) GLP/GMP printouts-reports Repeatable and customized applications Work optimization due to the use of halogen lamps Capacity and temperature MA.X2.A maximum capacity ranges from 50g/0.1mg to 210g/0.1mg. Moisture content is measured with the 0.01% accuracy (0.001 % for samples bigger than 1.5g). The maximum drying temperature is 160˚C (there is an optional moisture analyzer with 250˚C maximum temperature). An additional element for moisture analyzers that improves their functionality is a water vapour permeability determination set used in tanning industry for determining hygienic properties of leather. Databases: Information system of X2 series moisture analyzers is based on 8 databases, allowing many users to operate product database comprising many samples. Collected measurements may be subjected to subsequent analysis. Collected data is registered in 8 databases: Products (up to 5000 products) Users (up to 100 users) Packaging (up to 100 packagings) Customers (up to 1000 customers) Drying programs (up to 200 drying programs) Drying process reports (up to 5000 drying process reports) Ambient conditions (up to 10000 records) Weighings (up to 50000 records) The results The results obtained using the moisture analyzer (the final result of the drying process): % M – the mass loss in %; displays the mass change recorded during the drying process, expressed as a percentage, % D – the dry mass obtained during the drying process, expressed as a percentage; the result is the portion of the sample that remains on the weighing pan after the moisture has evaporated, % R – the ratio of moisture content to dry mass, obtained during the drying process, expressed as a percentage; the result is the portion of the sample that evaporated during the drying process, g – the sample mass after drying. Interfaces USB interface ensures quick transfer and copying of any results of your work (measurements, reports, databases) to a computer or other moisture analyzer. Remote access to the moisture analyzer allows for online data management. Cooperation with E2R allows for external data management which in turn increases the efficiency and results to the maximum.

Microtips for the SFX Sonifier are available in four sizes to handle volumes up to 150 ml. The micro (more)tips are also designed to process samples in the smallest diameter vessels. This tip is for use with the Branson 150 watt SFX and SLPSonifier only. Processing Volume 1ml & under Tip Diameter 3/32 in (2.4mm) Approximate Length 4 in