Lot of Lab Equipment, Centrifuge, Shaker, Power Supply, Water Bath etc NOTE - THIS IS A SPARES/REPAIRS ITEM

Water bath from 25°C to 100°C for the laboratory The water baths of the LAUDA Hydro series are the i (more)deal tools for any laboratory application, whether biological, medical or biochemical and guarantee a homogeneous temperature distribution without overheating problems. High quality stainless steel and thoughtful design, provide the ideal depth and opening for any application with bathroom volumes from 4 to 41 liters. All water baths offer a temperature range up to 100°C, with a temperature stability of ±0.1K, so that applications even in the boiling range are possible. A TFT color display ensures intuitive operation with temperature display in °C and °F. Application examples - Preparation of cellular, biological or medical samples - Microbiological test incubation - Thawing of the samples - Conducting chemical reactions Notable features - Three timer functions for the user - Electric resistance inside the tank - Direct temperature control for fast and precise heating - Visual and acoustic alarm in case of lack of water, low / high temperature and sensor break - Digital and electromechanical safety system - Lid designed to prevent condensation from dripping onto samples - Exhaust valve on all models Standard equipment - Lid and drain tap in heat-insulating double-walled stainless steel Highest quality materials: tank interior, lid, sieve and heating element made of stainless steel. Heat insulating lid in stainless steel, double walled with internal curvature to guide the condensate. Dump valve on all Hydro Lauda models. Simple control panel with large TFT display with extensive information; change settings and navigate quickly and easily. Optical and acoustic alarm for low water level and over/under temperature as well as sensor breakage/short circuit. Optimized space, safety and comfort of use. Connection for water level regulator (available as accessory). Recommended accessories - Water level regulator. Thanks to this accessory, the loss of water inside the instrument (through evaporation) is compensated and the water level is kept constant. Furthermore, it allows use at temperatures below ambient temperatures, with a minimum of approx. 3°C above tap water temperature.

B5 Haake F6 Circulating Water Bath F6 Laboratory Chiller Brand: HAAKE Voltage: 230V, 50Hz Current: 9 (more)A Power: 2100 VA Thermostat temperature range: -60 to 250ºC Water bath content: 4.5 L External dimensions (W) x (D) x (H): 21 x 37 x 37.5 cm Internal dimensions (W) x (D) x (H): 14 x 15 x 15 cm

This Grant SBB Aqua 18 Plus Boiling  Water Bath was removed from a university lab where it was  (more)surplus to requirements. The unit powers up and has been tested with a digital thermometer. It is a boiling bath so only works to 100˚C.  It reached 96.8˚C. Digital thermometer not included. The lid is missing but it is in otherwise good cosmetic condition with minor marks. 18 litre water capacity

Nickel Electro Clifton 56L NE2-56D Water Bath This was removed from a university lab where it was su (more)rplus to requirements. The unit powers up and is in good working order. (It was tested with a temperature probe, not included). It is in good cosmetic condition with minor marks. Capacity- 56L Temperature range: ambient +5 to 100˚C Electric Supply: 230V 50/60Hz Serial number- 98307

Lauda Alpha RA 8 Cooling Thermostatic Water Bath This was removed from a university lab where it was (more) surplus to requirements. The unit powers up and is in good working order. (Digital thermometer used for testing not included). It is in good cosmetic condition with minor marks.

Memmert WTB50 Digital Water Bath 51L, 115V Volume 51 L Working Temperature Range +5 above ambient t (more)o +100 °C Setting Accuracy 0.1°C Features - Precise temperature control with a working range from 5°C above ambient up to +100°C ensures consistent results - Highly accurate settings with 0.1°C precision for optimal temperature management - spacious 51-liter capacity designed to handle a wide range of applications - Durable, corrosion-resistant stainless steel construction guarantees long-lasting performance - Effortless operation with an intuitive 3.5" color touch screen for quick adjustments - Advanced two-stage safety system prevents overtemperature, protecting your valuable samples - Autodiagnostic system with built-in fault detection keeps your process running smoothly - Easy-to-clean deep-drawn stainless steel tray with central drain minimizes maintenance time The Memmert WTB50 Digital Water Bath 51L, 115V offers precise temperature control with a working range from 5°C above ambient up to +100°C, ensuring accurate and reliable performance across various applications. Its spacious 51-liter capacity makes it ideal for larger tasks, while its stainless steel construction ensures durability and corrosion resistance. With a setting accuracy of 0.1°C, users can confidently manage temperature-sensitive processes. The water bath's 3.5" color touch screen provides intuitive operation, allowing for quick adjustments to maintain optimal conditions. For added safety, the Memmert WTB50 features a two-stage overtemperature protection system, including a pressure sensor for level monitoring and a thermal fuse for automatic heating shutdown in case of an error. The built-in autodiagnostic system with fault detection keeps processes running smoothly. Maintenance is simple, thanks to the easy-to-clean deep-drawn stainless steel tray with a central drain. Additionally, a digital timer and independent temperature limiter further enhance control and operational safety. INCLUDED: The Memmert WTB50 Digital Water Bath 51L, 115V includes: - Power Cord - Operator's Manual - Manufacturer's Documentation - 3 Year Manufacturer's Warranty

Beckman L8-60MR Ultracentrifuge This was removed from a university lab where it was surplus to requi (more)rements. The unit powers up and was tested with a Beckman 70.1 Ti rotor from another item (Not included), but would not reach over 3000rpm (Rotor max is 10000). We suspect there is a vacuum issue as the vacuum light flashed red during testing. The system also will not cool down. It is in otherwise good cosmetic condition. It is sold for spares/repairs. Beckman L8-60MR UltracentrifugeModel: L8-60MRSerial#: 6H816Year: 1988

Bio-Rad PR3100. Compact absorbance reader for 96-well microplates, includes filters 405, 450, 492, 5 (more)50, 620 nm, color touch screen, computer embedded with Magellan CE software. User manual.

Memmert IPP30 Peltier-Cooled Forced Circulation Incubator 32L, 115V Setting Temperature Range Ambie (more)nt 0°C to 70°C Convection Type Peltier Fan Forced Circulation Chamber Volume 32 L (1.1 cu.ft.) Features - 32 L volume capacity with precise temperature control - Setting temperature range from 0°C to +70°C for versatile applications - Energy-saving Peltier heating/cooling system for efficient temperature regulation - ControlCOCKPIT digital controller with high-definition TFT-color display - Process timing starts only when the set temperature is reached with SetpointWAIT function - Three freely selectable temperature calibration points for accurate settings - Adjustable electronic overtemperature monitor and mechanical temperature limiter for enhanced safety - Durable, corrosion-resistant stainless steel interior and textured stainless steel casing The Memmert IPP30 Peltier-Cooled Forced Circulation Incubator 32L, 115V offers precise temperature control for a wide range of laboratory applications. With a temperature range from 0°C to +70°C and a setting accuracy of 0.1°C, this incubator ensures reliable and consistent results. Its energy-saving Peltier heating/cooling system is designed for efficiency, while the advanced ControlCOCKPIT digital PID-microprocessor controller with a high-definition TFT-color display makes operation intuitive. The SetpointWAIT function ensures that processes begin only once the set temperature is reached, providing additional accuracy and peace of mind. This 32-liter incubator features a corrosion-resistant stainless steel interior and a textured stainless steel exterior, ensuring durability and long-lasting performance. The unit is equipped with an adjustable electronic overtemperature monitor and mechanical temperature limiter for enhanced safety, while the autodiagnostic system offers fault analysis. With a maximum chamber load of 132 lbs and support for up to three shelves, the IPP30 is designed to handle a variety of samples, making it an ideal solution for laboratories that require precise, reliable, and energy-efficient incubation. INCLUDED: The Memmert IPP30 Peltier-Cooled Forced Circulation Incubator 32L, 115V includes: - 1 Stainless Steel Grid - Tilt Protection Wall Bracket - Calibration Certificate - Power Cord - Operator's Manual - Manufacturer's Documentation - 3 Year Manufacturer's Warranty

C315 Load Cell Platform Scale Precision weight determination in light industrial environments at an  (more)even lighter price. Wherever fast weighing is important. The C315 scale is equipped with the PUE C315 weighing terminal with a backlit LCD display. This long-established technology guarantees reliability and low power consumption, and most importantly, a very long display life. Don’t worry about robustness The construction of the scale is made of powder-coated steel with a stainless steel weighing pan. This guarantees you work for many years, and what’s more, powder-coated steel is more environmentally friendly than traditional painting methods. You will not run out of energy The scale has two power sources: mains and rechargeable. Thanks to its well-designed electronics and LCD display, the device consumes only 5W of energy, which will allow you to work for up to 8 hours without mains power. You get battery power as standard.

Hermle Z496-K Tissue Culture Bundle The Z496-K centrifuges offer the highest tube/bottle capacity in (more) our line. Several rotors are available, including a popular 4 position swinging bucket rotor with a wide offering of accessories for the centrifugation of tubes, bottles, plates and blood bags. The high capacity rectangular buckets accept microplates directly or a variety of tube inserts for accomodating as many as 40 x 50ml conical or 96 x 15ml conical tubes per run. Advanced microprocessor controls allow for instant rotor identification, which automatically converts the rotational speed to the relevant g-force (rcf), preventing the user from setting a speed above the capabilities of the installed rotor. In addition to retrieving up to 99 saved programs, the easy to use front panel can adjust accel/decel rates, time, and convert operation between rpm and rcf. The powerful refrigeration system, with a range of -20° to 40° C, also features a precool function that ensures the temperature of the chamber is optimized for any application. A standard floor standing model is available (height: 38.6 in.) which includes a convenient lower drawer for the storage of frequently used rotors and accessories. In addition, a space saving “underbench” model (height: 27.5 in.) is available when under the counter storage is preferred. Both models are equipped with wheels for easy maneuverability around the laboratory. For all your high capacity, high volume needs, the Z496-K floor standing series is the perfect centrifuge. INCLUDED: The Hermle Z496-K Tissue Culture Bundle includes: - Hermle Z496-K High Volume Floor Standing Centrifuge (230V ONLY) - Z496-1000 4 x 1000ml Swing Out Rotor with Rectangular Buckets - 1 Set of Z496-1000-A50 15ml Adapters - 1 Set of Z496-1000-A15 50ml Adapters - Power Cord - Operator's Guide - Manufacturer Documentation - 5 Year Manufacturer's Warranty