Memmert WTB50 Digital Water Bath 51L, 115V

This Huber Minichiller Refrigerated Laboratory Water Bath was removed from a university lab where it (more) was surplus to requirements. The unit powers up and has been tested with a digital thermometer (not included). When set to -20˚C it dropped to -12˚C after running for 5 hours. It is not designed to heat. It is in good cosmetic condition with some marks from use.

C.B.S. Scientific Model 71 Water Bath DGGE-2001 DGGE Electrophoresis System Lab This was removed fro (more)m a university lab where it was surplus to requirements. The unit powers up and has been tested with a digital thermometer (not included). It is in good working order.  Both pump speeds (High/Low) work correctly. Included are; TankModel: DGGE-2001Volts (DC/Hz): 250VDCMaximum Operating Limits: 250VDC/30W/70ºC Polyscience Model 71 Analog Immersion Recirculating Water Bath Heater PumpModel: 71Voltage: 240RangeHz/A: 50/4.30S/N: G15327Rev: B

Covaris S2 Focused Ultrasonicator with Grant LTC1 Water Bath This was removed from a university lab (more) where it was surplus to requirements. Included are; 1 x Covaris S2 Focused UltrasonicatorModel S2Ser No. 541The unit powers on and is in good cosmetic condition. The motor can be heard almost immediately after powering on the unit. We were unable to test it further.1x Grant LTC1Model R2The unit powers on and is in good cosmetic condition.It has been tested with a digital thermometer (not included) and is in good working order.

Selecta DIGIT-COOL circulation ultrathermostat. Digital. Adjustable temperature from ambient to 100  (more)ºC. Stability ±0.01 °C. Pt100 sensor. Circulation pump 150 mbar. Adjustable flow rate up to 12 l/min. Safety thermostat and fluid level buoy. Selectable maximum and minimum alarm and working temperatures. (HWD): 450*210*510mm; 22 kg. Consumption: 1.4600 W. User manual. The DIGIT-COOL Selecta Circulation Ultrathermostat is high quality equipment designed to precisely control temperature in laboratory applications and industrial processes. With its easy-to-read digital display and intuitive controls, this thermostat ensures precise and stable temperature control, making it ideal for a wide range of applications. This ultrathermostat features efficient internal circulation that ensures uniform heat distribution, resulting in a homogeneous temperature throughout the system. Additionally, its compact and robust design makes it easy to install and operate, making it an excellent choice for laboratories and industrial plants. With a wide range of temperature settings and exceptional accuracy, the DIGIT-COOL Selecta Circulation Ultra Thermostat is a reliable and versatile tool for any work environment requiring precise temperature control. Its advanced technology and exceptional performance make it an ideal choice for applications requiring precise temperature control. The DIGIT-COOL immersion thermostat allows you to regulate the temperature of the liquid from 0ºC to 100ºC with a stability of 0.1ºC. The thermostats are equipped with: - Pt100 resistance thermometer temperature sensor. - Circulation pump with adjustable flow for agitation. - Cooling coil to regulate room temperature by connecting to mains water. - Safety thermostat and fluid level buoy. - Selectable upper and lower alarm temperature. - Selectable maximum and minimum working temperature. - Selectable reading correction. - RS232 connection. - Reading in degrees Fahrenheit or Celsius. Accessory not included with the possibility of supply: stainless steel bucket, lid with canopy or with reducing discs, frame and racks.

Julabo CORIO C-B27 Open Heating Bath, 115V/50-60Hz (NRTL Certified) Working Temperature Range 20°C  (more)to 100°C Heating Capacity 1000W Volume 27L Features - Models for internal applications - Bright, white, easy to read display - Very quiet - Precise temperature control JULABO CORIO™ Immersion Heating Circulator combinations with transparent or stainless steel bath tanks for routine laboratory tasks. Units include bright LED display and easy operation. A quick connect bath clamp is included.The CORIO™ C immersion circulator provides temperatures to 100 °C for internal bath applications for use with water only.Products include a quick connect clamp for positioning the CORIO™ C on tank rim. Polycarbonate bath tanks have volume graduations in L and Qt. Stainless steel bath tanks include a drain port (except B5).INCLUDED: The Julabo CORIO C-B27 Open Heating Bath, 115V/50-60Hz (NRTL Certified) includes: - Quick Connect Clamp - Power Cord - Operator's Manual - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Benchmark MyBath 8L Digital Water Bath The myBath series is designed to guarantee superior accuracy  (more)and performance in a compact footprint. With four sizes to choose from, there is a myBath to fit every lab. The 8L model includes easy to use controls allow the user to digitaly select and monitor settings. Adjustable in 0.1ºC increments, the temperature is shown on a large, 3-digit display. The proprietary Quik-CAL feature allows for simple, in-lab calibration. High efficiency insulation maintains temperature stability and uniformity within the bath, while keeping the housing cool to the touch. All myBath models feature seamless, stainless steel chambers for easy cleaning and long life The chambers resist rust and have no corners to collect dirt or contamination. The 8L unit has drains for hassle-free water changes and includes a see-through cover that can be removed, or flipped back on a rear hinge to conserve bench space. The lid’s gabled design will divert condensation to the front and back of the bath, away from samples. Racks are available to accommodate 1.5/2.0ml, 15ml and 50 ml tubes. INCLUDED: The Benchmark MyBath 8L Digital Water Bath includes: - Cover - Power Cord - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

CLIMATE CHAMBERS KK SMART PRO POL-EKO KK - RELIABLE AND HIGHLY CUSTOMIZABLE Built and designed witho (more)ut compromise, they are successfully used in medical, biotechnological, chemical and industrial laboratories. An important application is pharmaceutical stability testing according to ICH Q1A (R2) - (CPMP/ICH/2736/99). They maintain a constant temperature from 0°C to 60°C and thanks to an ultrasonic humidifier, they regulate humidity from 30% up to 90%. They are equipped with the most advanced POL-EKO control panel: the Smart PRO touchscreen. Large 7' display, WiFi for communication and data transfer, programming, alarms, internal memory for recording and overview of data in graphic form and much more, including standard software for complete management via PC. Continue reading and discover all the other surprising features of these climatic chambers! ABSOLUTE CONTROL The SMART control panel is among the most complete you can find on the market. Large symbols and temperature values ​​guarantee comfortable and clear reading, combined with disarming ease of use. The latest generation touch screen responds to commands even if touched with latex gloves and is equipped with a large display: all values ​​are perfectly readable from any angle, regardless of the intensity of the light. Thanks to SMART PRO you will be able to have possibilities that you didn't have before. Cutting-edge functions and freedom of transfer and remote use, thanks to LabDesk software. You can find all the features of the SMART PRO panel in our dedicated post: insights on SMART and SMART PRO. DO YOU KNOW THE ADVANTAGES OF AN ADVANCED CONTROLLER LIKE THE SMART PRO PANEL? - Sharp 7' color touch screen - LAN, USB and WiFi ports for communication and data transfer - Fast, multi-segment, time and temperature programming - Adjustable ramps - Recording of the minimum, average and maximum temperature value for each segment - Visual and audible alarms with colored bar on display - Internal memory for programs and data storage - Fan speed control 0...100% or 10%...100% (depending on chamber capacity) - User manual downloadable directly from the controller - Loop function up to 255 times or infinite - Temperature sensor failure alarm - Event log with user notifications - Controls can be managed even when wearing latex gloves - Overview of the set and current parameters during operation in tabular and graphical form - Operation in temperature or time priority mode - Ability to create user accounts with assignment of rights and passwords - Memory of 40 user programs - Data log – 10,000 data records for each user, ability to view data on screen in tabular or graphical form - Direct data download via USB port - Event log QUALITY FIRST Resistant. Durable. POL-EKO climatic chambers are designed and built to guarantee the best performance. They are a smart purchase, for customers who want to invest in the future of their laboratory. By choosing these products you will have precise results for years and years, repeatable and in complete comfort. The climatic chambers of the KK Smart series are builded with the best materials and equipped with the most important accessories, to give you a complete and ready-to-use standard product. - Insulated door with lock - Internal glass door - Interior made of acid-resistant stainless steel according to DIN 1.4301 - Stainless steel grill shelf (INOX) - Overtemperature protection class 3.3 according to DIN 12880 - Castors - Quality control protocol (at +25°C and 60%rH) - Automatic defrost function - USB port, LAN (with cable) and Wi-Fi connection - Lab desk software - External probe insertion hole diam. 30mm to the left - Deionized water tank - Open door alarm - Available with FIT: phytosystem – day and night simulation with intensity control. To find out more, download our informative pdf: The photoperiodic (FOT) and phytotron (FIT) systems by POL-EKO. NOTE: the temperature range that can be used with FIT active is +10°C... +50°C. KK SMART PRO SERIES POL-EKO offers 9 climatic chamber models with capacities from 109 to 1485 litres. Unleash your possibilities. In the image below, the graph shows the excellent working range (humidity/temperature) that the POL-EKO climatic chambers are able to offer you, with the KK series (ultrasonic humidifier) ​​and with the KKS series (steam humidifier ). ULTRASONIC HUMIDIFIER Climatic chambers with ultrasonic humidifier are professional and reliable tools to guarantee stable and precise conditions. The maximum temperature of 60°C allows it to be used for seed germination, mushroom and plant cultivation or for food testing. The perfect climatic conditions allow stability testing of pharmaceutical and cosmetic products, as well as packaging and electronics. NOTE: For the KK series, deionized water (1 μS/cm) must be used. Feed water source: deionized water tank; deionizer; internal deionized water network. DETAILS AND ACCESSORIES Every detail of your POL-EKO models is designed to make routine work as simple and comfortable as possible. Below, the front and rear view of your future ovens for drying, analysis or testing. 1 - Rating plate 2 - Fan 3 - Internal glass door 4 - Hole for ø30mm external probe 5 - Shelf 6 - Position of the condenser 7 - Wheels with lock 8 - Solid external door (optionally with window) 9 - Touch screen control panel 10 - USB port 11 - Door open sensor 1 - Container for deionized water 2 - Power cable 3 - Connectors 4 - Connectors (to a tank with demineralised water or deionizer) 5 - Service connector 6 - Connection to the drain 7 - Main switch 8 - LAN port 9 - Fuse For larger models (KK 500 / 700 / 1200 / 1450): a - Power cable b - Container for deionized water c - Condensate collection tray with pump d - Main switch e - LAN port f - Fuse Together with the climatic chamber you will also receive: OPTIONS POL-EKO allows you to increase the possibilities of your climatic chamber with quality accessories; to better adapt to particular applications or to equip the instrument with safety systems and advanced connections. In the photo, the inside of a climatic chamber with LED series Fitotrone System.. - Door with panoramic window - Perforated shelf - Reinforced shelf - Stainless steel basins - Phitotron FIT system - Internal socket - Water level sensor - IQ OQ PQ calibration and qualification - Backup battery for the display in case of power failure - Clean contact - Non-standard 20/60/100 mm access door - Additional 30 mm access door ◉ POL-EKO CUSTOMERS The SPEKTROCHEM research and development center for paints, adhesives and polymers has been a loyal POL-EKO customer for several decades. Use climatic chambers for tests on water-based raw materials prepared in the laboratory.

Ohaus multi-tube vortex shakers These vortexes are ideal for processing a large amount of samples at (more) the same time. They consist of interchangeable foam racks for mixing tubes with a diameter of 10 to 29 mm. Feet with powerful suction cups reduce movement and prevent the device from slipping on the work surface, for safe operation in your laboratory. High speed and small orbit make these mixers perfect for mixing microplates effectively. All models are designed for continuous laboratory operation. Analog models: economical alternative for simple mixing; controls: knob adjustment. Digital models: timer and exact speed control for applications requiring repeatable results; controls: Touch / Standby / On switch; LED display for speed and time, buttons for adjusting default values. Single or double holders for microplates are available as accessories. - Easily process up to 50 samples simultaneously - Custom multi-tube mixer with six different tube racks and an extension kit - Easy-to-clean monobloc stainless steel chassis, perfect for a variety of environments, especially cleanrooms - For demanding samples, mixing can be improved by making it more vigorous thanks to the programmable pulse mode (digital models only). In addition, it is possible to adjust the interval of the pulse times and customize its operation The product includes: Foam rack for 12 mm tubes (code 30400239) Applications High throughput suspensions, genotyping, DNA and RNA testing in clinical laboratories Display Independent LED displays with speed and time information allow the operator to view both settings simultaneously (digital models) Operation Detachable three-wire cable and plug (included) Structure Foam and stainless steel rack for (50) 12mm diameter tubes (included). Interchangeable with foam rack for mixing tubes with diameter from 10 to 29mm

10 x Ohaus Traveler TA301 Electronic Balances/Scales & Calibration Weights These were removed f (more)rom a university lab where they were surplus to requirements. Each item powers on and is in good working order. They are all in good cosmetic condition with minor marks. Includes: 10 x  Ohaus 200g weights10 x power supplies4 x manuals These scales also have the option to be operated with AA batteries Max 300gModel number- TA301

HX7.4P2 H is a beam scale made of stainless steel. 4-load-cell, 2-component mechanical design stands (more) for high measurement accuracy. The weights may be loaded onto the pan using a forklift or a transporter crane, supplementary handles significantly facilitate the transport. The device has been fitted with a 7" colour display and a diode bar graph. Blinking green and red diodes show current load mass, the mass is presented in reference to the scale range or declared minimum and maximum thresholds. At the back of the housing there are hermetic connectors of RS232, RS485, USB and Ethernet communication interfaces, plus digital inputs/outputs and analogue output. This enables cooperation with external devices such as barcode scanners, printers, external displays, control buttons, light signalling towers, other controlling/signalling devices, systems for automatic process control and superior IT systems. With use of the bracket you can either place the indicator at any flat horizontal surface, or fix it to the wall adjusting the tilt respectively to suit your needs. The terminal's software allows carrying out processes such as weighing, parts counting, dosing, labelling, formulations and percent weighing. Indicator’s system of information is based on databases (users, products, weighings, packaging, formulations, customers) and ALIBI memory which guarantees stored data safety.

IKA Pette Vario 2 - 20ul Pipette Features - Improved ergonomics as a result of replaceable handles  (more)ensures precise and repeatable results - Comfortable and rapid adjustment of the pipetting volume - Set volume can be read off the display in large figures at any time - Pipette tip is ejected quickly and without time-consuming hand repositioning simply by pressing the central multifunction button - Piston and tip cone are made from DLC-coated (Diamond Like Carbon) stainless steel which exhibits high levels of wear and corrosion resistance - Anti-friction properties allow the pipette to require to be re-greased on rare occasions - No tools are needed for adjusting/calibrating the IKA Pette - Simplified acquisition, documentation, and monitoring with the serial number being accessed from the scannable QR Code - Can be autoclaved at 121C in a complete or dismantled state - All IKA Pette models are compatible with universal fit pipette tips from most manufacturers IKA Pipettes include three interchangeable handles in various different shapes and materials. The choice of the right handle for your particular hand means the pipette can be adadpted to suit your individual requirements Pipetting volume is adjusted in two stages (fine and coarse) with the ability to lock or unlock the volume needed. All volume adjustments can be completed easily by the user with just one hand Easy disassembly for simple maintenance and cleaning. The volume unit with piston and seal can be replaced completely in just a few hand movements. Upon re-assembly, an audible "click" is heard to ensure the pipette is secure Lies comfortably in your hand with uncompromising precise performance: The IKA PETTE vario single-channel pipettes are used for many different applications in the modern laboratory. Color-coding simplifies rapid selection of the right pipette. The impact-resistant, UV-resistant and chemically resistant conical tip ensures reliable metering in the long-term.Click Here to View Product Videos INCLUDED: The IKA Pette Vario 2 - 20ul Pipette includes: - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer Warranty ( + Additional Free 1 Year Warranty Extension with IKA Registration) IKA Pette Vario 2 - 20ul Pipette SpecificationsAdjustable or Fixed VolumeAdjustable VolumePipette TypeMechanical Air DisplacementVolume Range2 - 20 µlIncrements0.02 µlAccuracy (Nominal Volume µl / %) ± 0.2 µl / 1%Precision (Nominal Volume µl / %)± 0.06 µl / 0.3%Accuracy (50% of Nominal Volume µl / %)± 0.12 µl / 1.2%Precision (50% of Nominal Volume µl / %)± 0.06 µl / 0.6%Accuracy (10% of Nominal Volume µl / %)± 0.1 µl / 5%Precision (10% of Nominal Volume µl / %)± 0.03 µl / 1.5%